Remove 95 cvf include lines that the including file does not use. Found by
extracting the symbols declared by every VizFwk header, including symbols they
re-export, and flagging includes where none of those symbols appear anywhere in
the file. Each removal is verified by a full build.
Most of them are cvfVector3.h and cvfObject.h, left behind as the files they
were once needed by changed.
pch.h is left untouched. It includes cvfObject.h and cvfVector3.h on purpose, so
that the files using the precompiled header do not have to.
Note that a clean build after removing an include does not prove the include was
unnecessary, only that the declarations still arrive some other way. That path
can differ between platforms and with RESINSIGHT_ENABLE_UNITY_BUILD, so this
needs a CI round on Linux as well.
Migrate all assert macros in ApplicationLibCode to CAF_ASSERT and remove every
use of cvfAssert.h.
CVF_ASSERT is replaced one to one. CVF_TIGHT_ASSERT is also replaced by
CAF_ASSERT, which is semantically exact: CVF_ENABLE_TIGHT_ASSERTS is 1 only
under _DEBUG, and that is what CAF_ASSERT now does. The two CVF_FAIL_MSG sites
become CAF_ASSERT( false && "message" ), preserving the message with the idiom
already used elsewhere in the code base.
Counts before and after: CVF_ASSERT 1044 to 0, CVF_TIGHT_ASSERT 66 to 0,
CVF_FAIL_MSG 2 to 0, cvfAssert.h references 154 to 0.
Include handling: files that included cvfAssert.h directly now include
cafAssert.h instead, includes left dead by the migration are removed, and files
that were relying on cvfAssert.h transitively get an explicit cafAssert.h. Files
that reach cafAssert.h through another caf header are left unchanged; a missing
include here is a compile error, not a silently disabled assert.
ResultStatisticsCache links only LibCore and therefore had no path to
cafAssert.h. Add the cafPdmCore directory as a private include path rather than
linking the library, since cafAssert.h is header only.
Note that this stops these asserts from firing in Release and RelWithDebInfo,
where CVF_ASSERT was previously active.
* Recompute well cell arrays when the grids change
computeWellCellsPrGrid() returned early whenever the arrays had been computed once, so the
size check below it was unreachable and a stale array was kept when the grids changed. The
too-short array triggered an assert in RivReservoirViewPartMgr::computeNativeVisibility.
Return early only when the cached arrays still match the current set of grids.
* Guard against missing GUI application when applying style sheet
RiaGuiApplication::instance() does a dynamic_cast and returns null outside a GUI context. The
assert guarding this is compiled out in release, so the null pointer was dereferenced.
* Guard against missing case in flow characteristics plot field change
The case field can be set to nothing from the UI. RimEclipseResultCase::defaultFlowDiagSolution()
and reservoirViews() were then called on a null pointer.
* Guard against missing case and out of range time steps when updating flow characteristics plot
onLoadDataAndUpdate() dereferenced the case without checking, although the same function handles
a missing case further down. The time step indices come from the flow diagnostics solution, and
were used to index arrays sized by the number of case time steps without a range check.
RimWellRftPlot::dataSource() returned a default constructed variant when no source was selected. The variant then held a null RimSummaryCase pointer, and RicCreateRftPlotsFeature dereferenced it. Add std::monostate as first alternative to represent no data source.
RimCase::timeStepDates() returns std::vector<QDateTime> by value, so
calling cbegin() and cend() in separate invocations produced iterators
into two different temporary vectors. Passing these mismatched iterators
to std::find is undefined behavior and walked off freed memory, crashing
in setValidTimeStepRangeForCase().
Snapshot timeStepDates() into a single local vector and use its
iterators. The same pattern was fixed in RimWellConnectivityTable.
* CMake: Remove dead CODE_HEADER_FILES variable
* CMake: Remove dead COMMAND_CODE_HEADER_FILES and COMMAND_MOC_SOURCE_FILES
* CMake: Remove dead MOC_SOURCE_FILES and FORM_FILES_CPP references
* CMake: Remove dead HEADER_FILES reference
* CMake: Delete unused CustomPCH.cmake superseded by target_precompile_headers
When the user toggles "Show Curve" off, updateCurvePresentation runs
updateCurveVisibility, which detaches and deletes m_plotCurve, before
calling updateCurveAppearance. The override in RimWellFlowRateCurve
dereferenced m_plotCurve unconditionally and crashed. Match the null
guard already present in RimPlotCurve::updateCurveAppearance.
Fixes#14011.
Move the QMessageBox-displaying helper out of the logging utility into a
dedicated UI class. RiaLogging.h no longer pulls QMessageBox/QWidget into
the ~270 files that include it. Behavior is preserved: showError displays
the dialog when running interactively (and not under regression tests),
then forwards the text to RiaLogging::error.
* Fix defensive guards and TVD interpolation
Guard against out-of-bounds IJK and invalid cells in RifReaderRftInterface.
Guard against null eclCase in RimDataSourceForRftPlt::address.
Guard against null plot widgets in RiuMultiPlotPage.
Fix interpolateMdFromTvd corrupting valid entries after infinity TVD values
by skipping infinity entries in the first pass and tracking only the last
two valid MD values for the startMD adjustment.
* Add RiuQwtCurveSelectorFilter for click-to-select realization in Qwt plots
New shared event filter class that installs on a QwtPlot canvas and calls a
user-supplied callback with the closest data point on each click.
Migrate the local CurveSelectorFilter in RimParameterResultCrossPlot to use
the new shared class. Add Z_HIGHLIGHTED_CURVE to ZIndex enum and replace all
raw z-order integers in RiuQwtPlotCurveDefines with named constants.
* Add RFT correlation report plot with cross-plot and tornado plot
New classes:
- RimRftCorrelationReportPlot: composite plot showing an RFT well log track
alongside a parameter cross-plot and a tornado plot sub-plot.
- RimParameterRftCrossPlot: cross-plot of ensemble parameters vs RFT-derived
measured depth values, with click-to-select realization support.
- RimRftTornadoPlot: tornado plot with correlation-sorted parameter list and
click-to-select realization support.
- RicCreateRftCorrelationReportFeature: context menu command on RimWellRftPlot
that creates a RimRftCorrelationReportPlot in the correlation plot collection.
Wire up in RimCorrelationPlotCollection and RimContextCommandBuilder.
* Add click-to-select and highlight selected realization in RFT plots
Install RiuQwtCurveSelectorFilter on RimWellRftPlot canvas to support
click-to-select realization. Highlight the selected realization using a
contrast color (orange-red) and increased line thickness. React to both
click-to-select in the plot and selection changes in the Data Sources panel.
Add Z_HIGHLIGHTED_CURVE z-order and replace raw z-order integers with
named constants in RimWellRftPlot.
Highlight selected realization with XCROSS symbol in RimParameterRftCrossPlot
via RimSummaryEnsembleTools::findSummaryCase.
* RimWellRftPlot: add Create RFT Correlation Report to canvas right-click menu
Override appendMenuItems in RimWellRftPlot to add RicCreateRftCorrelationReportFeature.
Call appendMenuItems from RiuMultiPlotPage::contextMenuEvent so any plot type
can contribute canvas menu items without modifying RiuMultiPlotPage.
* RicShowPlotDataFeature: support RimRftCorrelationReportPlot
Add RimRftCorrelationReportPlot to the isCommandEnabled check and expand
it into its cross-plot and tornado sub-plots in onActionTriggered, matching
the pattern used for RimCorrelationReportPlot.
Migrate all callers to use type-safe ReservoirCellIndex and
ActiveCellIndex wrappers, then remove the deprecated isActive(size_t),
cellResultIndex(size_t), and setCellResultIndex(size_t, size_t) methods.
Replace boolean push button fields used as UI triggers with dynamic buttons
added via addNewButton in defineUiOrdering, removing unnecessary field
boilerplate across multiple classes.
connectionNumbersFromTop() now adds 1 to all values so connection numbers are displayed starting from 1 in both the plot and ASCII text report. Also updates the fictitious extension point from -1.0 to 0.0 to be consistent with 1-based numbering.
The fictitious depth point (-1.0) that extends the topmost connection bar
was only added for accumulated flow on branch 0. For inflow mode and
accumulated mode on branches > 0, the first connection bar had no extent
and was invisible, and the data export skipped the first real connection.
- Legend items are now ordered to match the project tree order
- Selecting a curve set in the project tree highlights it in the plot
and hides member curves of other curve sets (statistics unaffected)
- Clicking a legend item in the plot selects the curve set in the
project tree
- Improve text layout in dialog when multiple file names are found
- Fix missing update of ensemble curve sets
* Adopts dynamic PDM buttons with lambda callbacks
Refactors PDM push buttons from boolean fields to use the `addNewButton` API with direct lambda callbacks.
This change enforces a new coding guideline to extract complex or multi-line lambdas to dedicated `on*Clicked()` methods, improving code readability and maintainability.
- Replaces `PdmField` button fields with `PdmUiOrdering::addNewButton` calls.
- Extracts multi-line/control-flow lambdas into named methods in `RimFlowCharacteristicsPlot`, `RimGeoMechCase`, and `RimStatisticsContourMap`.
- Removes obsolete `defineEditorAttribute` overrides and `fieldChangedByUi` logic for these buttons.
- Updates `RimWellPathFracture` to utilize base class-provided button creation.
- Adds new lambda line-count guideline to the coding style documentation.
- Includes minor build fixes, such as adding `cafPdmUiButton.h` and correcting tooltip API usage.
* Refactor well log track settings into modular classes
Major refactoring of RimWellLogTrack to delegate property axis, formation, region annotation, and well path attribute settings to dedicated settings classes. Introduces RimWellLogPropertyAxisSettings, RimWellLogFormationSettings, RimWellLogRegionAnnotationSettings, and RimWellLogWellPathAttributeSettings, each encapsulating related fields, UI logic, and option handling. Old fields are retained for migration and backward compatibility. Updates enums and signatures for consistency.
Proxy fields usually reads and transforms data from other sources, usually other Pdm fields. This commit disables IO for proxy fields in the constructor. If XML serialization is required, this must be set on the proxy field, like this
field.xmlCapability()->setIOWritable(true)
field.xmlCapability()->setIOReadable(true)
* Configures automated spell checking with codespell
Adds GitHub workflows and configuration files for automated spell checking using `codespell`.
This includes:
- A workflow for checking pull requests and preventing new typos
- A workflow for automatically fixing typos in the main codebase
- Configuration files for `codespell` to ignore specific terms and file types
- Documentation on how to use and configure the spell checking workflows.
* Corrects minor spelling and grammar errors.
* Make sure RFT curve settings are restored correctly, use three numbers to identify project version string to compare with.
* Increases dialog window sizes for summary template operations
* Move improved summary import setting to Summary tab
* #12838 Use discrete linear as default legend for CNV_* result names
* Bump version to 2025.04.4-dev.10
Replaces direct PdmField usage for font sizes with the new
RimFontSizeField. This provides a consistent way to manage font
size options across different plot types.
The RimFontSizeField encapsulates the logic for generating font size
options based on the default plot font size from preferences. This
removes redundant code in various plot classes and ensures that font
size settings are synchronized with user preferences.
Store data sources and time steps directly to project file. Previously, this information was derived from existing curves in the plot, an approach that is fragile.
Import of previous file format is still supported.
* Do not create ensemble in initAfterRead
* Check if filter is active before update
* Do not recompute statistics on every loadData
* Removes unnecessary resampling
* MSVC: Add support for dynamic deoptimalization
* Make sure RFT plots are initialized based on curves in project file
* Make sure the progress dialog is always on top
* Add more progress info when loading project file
* Make sure names in RFT plots are updated
* Use vector name as axis object text, avoid identifier text
* Select the plot clicked at in the Project Tree
* Make sure RFT plots are updated when summary case and ensemble is changed
* Make sure all plots are updated for multiselect and toggle statistics
* Allow paste of plot on top level plot collection
* Allow multiple top level plots as destination for Append operations
Avoid pixel size for easier config across multiple environments
Set default font size for plots to 10 points
Use Small instead of XSmall for default font in plot
Remove pt postfix to indicate point size
Magne Sjaastad
Jon Jenssen
Kristian Bendiksen
magnesj