This commit introduces a special case for the restart file writing
code. In particular we no longer write dynamic data vectors (e.g.,
*WEL, *GRP, *CON) to the restart file if we're being asked to output
the initial condition (i.e., report step/sequence number 0).
Add the report step as a new explicit parameter to createInteHEAD()
instead of inferring this value from the "sim_step" and output
dynamic sizes as zero for report_step=0. While here, also correct
an omission from earlier commit 7986e99e. We must ensure that the
maximum number of wells in the field (intehead[163]) is at least as
large as the current number of active wells (intehead[16]).
Update "intehead" test to account for report_step being passed
directly as an argument to InteHEAD::stepParam().
This commit adds support for persisting the *VIT cumulative summary
vector at the well, group, and field levels in the simulation
restart files. Connection level currently not supported.
This commit introduces a new protocol for communicating a well's
active constraint (i.e., its current target control mode) between
the running simulator and the restart file. In particular, we add a
new type
Opm::data::CurrentControl
whose data members indicate if the well is a producer or injector
and, depending on that state, carries information about the
pertinent active control mode. The 'prod' member should be defined
for producing wells and the 'inj' member should be defined for
injectors. Default-constructed objects of this type are 'invalid'
and not output to the restart file. Add a CurrentControl member to
the Opm::data::Well type to enable communicating this information
using existing restart interfaces.
Expand existing unit tests to exercise the new data member.
make Tuning a simple struct, and store as a DynamicState<Tuning>.
in the process the unused setTuningInitialValue is removed. it was
only used in unit tests and seem like a leftover
change to avoid zero-size windows in Actionx
changes to improve Restart output content
change to correct IUDQ for DEFINE
corrections to IACN and SACN
initial changes to add item to ZWEL
further changes to add Action to well
further changes to allow for action name in ZWEL
more changes
further changes to output action name to ZWEL
changes to test/debug Restart write
turn on writing of ZWEL again
First running version of udq-actionx-rst
use Action::Result direkte
first working! version
some corrections
changes to allow for output of SACN [4.6.8]
added debug print
changes to improve IACN and IACT
further corrections to Actionx IACN pluss error messages
changes to adapt to well2 converted to well class
further changes to enable restart with group control
changes to adapt to newly merged code in master
changes to include Intehead [51] - group control
test
changes to iGrp[nwgmax +7]
initial changes for GUIDERATE
changes to add guiderate parameters to the restart file
add comment
correction to guiderate - test if exist
correction to DoubHead - test if GR exist
correction to ISEG[8]
correction for eclipse version Restart-file
Cosmetic change
corrections to igrp
correction to segment type in iseg
This commit identifies well segments that correspond to SICDs
(input keyword WSEGSICD) and captures those in the ISEG vector.
Furthermore, we output characteristic properties of such SICD
segments (e.g, the length, the base strength, calibration fluid
properties) in the RSEG vector.
This commit expands the basic aquifer restart support to also
include essential values for the Fetkovich analtic model. In
particular, we now also load the initial aquifer pressure and the
initial aquifer volume directly from the SAAQ restart vector, but
only if we know that the aquifer in question is of Fetkovich type.
This adds a basic protocol for retrieving simple scalar data for
each analytic aquifer, specifically from XAAQ. At the moment we
only support retrieving the aquifer pressure and the total produced
liquid volume from the aquifer and into the reservoir model.
This commit identifies certain items in restart vectors ISEG and
RSEG that pertain to valves (keyword WSEGVALV) and spiral ICDs
(keyword WSEGSICD). In particular, we identify segment type flag
and a couple of relevant values for this flag. Also, relevant
parameters that describe the geometry and pressure drops of these
devices.
This commit makes the (Day, Month, Year) indices of the restart
file's INTEHEAD vector to the publicly available VectorItems. This,
in turn, makes the entries more readily accessible outside of
InteHEAD.cpp.
further changes to Actionx - restart
further changes for Actionx data to Restart file
additional changes to output Actionx data to Restart file
add test data for UDQ-ACTIONX
changes to add unit tests for InteHead - Actionx
Added changes to allow for output of IACT, SACT and ZACT to the E100 compatible restart file
changes to add ZLACT to restart output
Further changes - add ZACN - prelim
further changes to add ZACN to restart file
Additional changes to output IACN and SACN to restart
further changes to add IACN and SACN to the restart file
further changes to make unit tests for Actionx data / keywords
further changes to actionx restart and unit tests therefore
Added code for unit tests - not finished
some changes to correct for changes in upstream/master
changes correct errors in IACN and SACN
Initial work to add Actionx data to Eclipse compatible restart file
further changes to Actionx - restart
further changes for Actionx data to Restart file
additional changes to output Actionx data to Restart file
add test data for UDQ-ACTIONX
changes to add unit tests for InteHead - Actionx
Added changes to allow for output of IACT, SACT and ZACT to the E100 compatible restart file
changes to add ZLACT to restart output
Further changes - add ZACN - prelim
further changes to add ZACN to restart file
Additional changes to output IACN and SACN to restart
further changes to add IACN and SACN to the restart file
further changes to make unit tests for Actionx data / keywords
further changes to actionx restart and unit tests therefore
Added code for unit tests - not finished
some changes to correct for changes in upstream/master
changes correct errors in IACN and SACN
changes to avoid change in output data for restart file
further changes to avoid change in RESTART data
minor change to avoid data change in Restart file
This commit replaces the existing system for writing summary and
specification (SMSPEC) files with a new implementation based on
class EclOutput. We package the evaluators of individual parameters
in a set of classes determined by the parameter's category which
each implement a virtual 'update()' function. This update function
ultimately writes new values into a SummaryState object.
Add a factory-like system for instantiating the appropriate class
depending on a SummaryNode's 'category()'. Also, add a helper class
for managing the parameters that a configured in a simulation
model's SUMMARY section in order to distinguish these from those
parameters that are merely needed for restart purposes. The summary
class's 'eval()' function then becomes a loop over the evaluators
for parameters in SUMMARY followed by a loop over the evaluators for
restart vectors.
We reimplement the 'internal_store()' function in terms of an
std::vector of a helper structure 'MiniStep' which holds a ministep
ID (contiguous counter started at zero), a report step ID, and all
the evaluated parameters of this ministep. The final write function
then consists of outputting those ministep structures that have
accumulated since the previous call to write(). If a simulation
does not call write at all, then this will accumulate all parameters
for all ministeps throughout the simulation history.
We create the SMSPEC file at most once, and write to it at most each
report step. We create the summary file once (if unified) or at
each report step (if separate).
UDQConfig object has merged DEFINE & ASSIGN
Log use of UDA for output purposes
Output UDQ keywords to restart file
Add size() method to UDQConfig
Add UDQVarTYpe member to UDQInput class
Add UDQIndex type to keep track of sequence number of variable types
Add unit to UDQInput class
use maps
Add operator[] to UDQConfig class
Use UDQInput class when creating restart file
UDQInput: use correct input index
Add UDQActive::get() method
Make sure UDQ DEFINE overwrite correctly
WIP
WIP - further code to output IGPH vector
WIP
Fix IUAD input index
Output use_index for IUAD
Fix bug with size of IUAD array
UAD usage hashing based on udqstring and controltype
Add UDQ test and input file
Refactor UDQActive - handles vanishing UDA
minor correction for iuad[1] and for test_UDQ_x.cpp
Further work for making unit tests for UDQ restart data
WIP Further work unit tests
WIP some minor corrections
WIP changes to add first version of BOOST test for IUDQ
WIP Added code to write InteHead and DoubHead data as well as IGPH to restart file,
Further added unit tests to the writing of UDQ data
add code to output IUAP array
Fixed group-group2 transition, disable Restart output
WIP Initial changes to add DUDW array to restart output
WIP further work on DUDW data
WIP - further work to output and test DUDW vector data to restart file
Further changes to write DUDW array to Restartfile
This commit makes the table linearisation code independent of
LibECL's "ecl_kw_magic.h" header. In particular, we add a new set
of vector items (tabdims.hpp) that describe the items we currently
define and reimplement the member functions of the 'Tables' class in
terms of these items.
Update the unit test accordingly.
This commit removes the original member functions
void Tables::addPVTO()
void Tables::addPVTW()
void Tables::addPVTG()
since these are no longer needed. The PVT tables are now defined in
terms of the 'addPVTTables()' member function
While here, also remove the fwrite() free function which was defined
in terms of LibECL types.
Update the unit test accordingly.
