Bump version to rc4

to automatically trigger find_package(OpenMP) in downstream
modules (e.g. Dumux)

CMakeLists.txt

@@ -1,5 +1,5 @@
 project(opm-common C CXX)
-cmake_minimum_required (VERSION 3.10)
+cmake_minimum_required (VERSION 2.8)
 
 option(SIBLING_SEARCH "Search for other modules in sibling directories?" ON)
 list(APPEND CMAKE_MODULE_PATH ${PROJECT_SOURCE_DIR}/cmake/Modules)
@@ -9,8 +9,8 @@ option(ENABLE_ECL_INPUT "Enable eclipse input support?" ON)
 option(ENABLE_ECL_OUTPUT "Enable eclipse output support?" ON)
 option(ENABLE_MOCKSIM "Build the mock simulator for io testing" ON)
 option(OPM_ENABLE_PYTHON "Enable python bindings?" OFF)
-option(OPM_INSTALL_PYTHON "Install python bindings?" ON)
-option(OPM_ENABLE_EMBEDDED_PYTHON "Enable embedded python?" OFF)
+option(OPM_INSTALL_PYTHON "Enable python bindings?" OFF)
+option(OPM_ENABLE_EMBEDDED_PYTHON "Enable python bindings?" OFF)
 
 # Output implies input
 if(ENABLE_ECL_OUTPUT)
@@ -32,23 +32,21 @@ set(OPM_PROJECT_EXTRA_CODE_INSTALLED  "#ENABLE_ECL_INPUT is needed by opm-common
                                        set(ENABLE_ECL_INPUT ${ENABLE_ECL_INPUT})
                                        set(OPM_MACROS_ROOT ${CMAKE_INSTALL_PREFIX}/share/opm)
                                        list(APPEND CMAKE_MODULE_PATH \${OPM_MACROS_ROOT}/cmake/Modules)
-                                       include(OpmPackage) #Make macros available after find_package(opm-common)")
+                                       include(OpmPackage) #Make macros availabe after find_package(opm-common)")
 
 set(OPM_PROJECT_EXTRA_CODE_INTREE "#ENABLE_ECL_INPUT is needed by opm-common-prereq.cmake
                                    set(ENABLE_ECL_INPUT ${ENABLE_ECL_INPUT})
                                    set(OPM_MACROS_ROOT ${OPM_MACROS_ROOT})
                                    list(APPEND CMAKE_MODULE_PATH \${OPM_MACROS_ROOT}/cmake/Modules)
-                                   include(OpmPackage) #Make macros available after find_package(opm-common)")
+                                   include(OpmPackage) #Make macros availabe after find_package(opm-common)")
 if(ENABLE_ECL_OUTPUT)
   set(OPM_PROJECT_EXTRA_CODE_INSTALLED "${OPM_PROJECT_EXTRA_CODE_INSTALLED}
                                         set(COMPARE_ECL_COMMAND ${CMAKE_INSTALL_PREFIX}/bin${${name}_VER_DIR}/compareECL)
-                                        set(OPM_PACK_COMMAND ${CMAKE_INSTALL_PREFIX}/bin${${name}_VER_DIR}/opmpack)
-                                        set(RST_DECK_COMMAND ${CMAKE_INSTALL_PREFIX}/bin${${name}_VER_DIR}/rst_deck)")
+                                        set(OPM_PACK_COMMAND ${CMAKE_INSTALL_PREFIX}/bin${${name}_VER_DIR}/opmpack)")
 
   set(OPM_PROJECT_EXTRA_CODE_INTREE "${OPM_PROJECT_EXTRA_CODE_INTREE}
                                      set(COMPARE_ECL_COMMAND ${PROJECT_BINARY_DIR}/bin/compareECL)
-                                     set(OPM_PACK_COMMAND ${PROJECT_BINARY_DIR}/bin/opmpack)
-                                     set(RST_DECK_COMMAND ${PROJECT_BINARY_DIR}/bin/rst_deck)")
+                                     set(OPM_PACK_COMMAND ${PROJECT_BINARY_DIR}/bin/opmpack)")
 endif()
 
 # project information is in dune.module. Read this file and set variables.
@@ -66,27 +64,6 @@ include(Findopm-tests)
 # with the find module
 include (${project}-prereqs)
 
-if(ENABLE_ECL_INPUT)
-  # source_hook runs before config_hook and the former needs fmt, hence this
-  # needs to be here.
-  if(fmt_FOUND)
-    # OpmSatellites will not add the library, do it here.
-    list(APPEND opm-common_LIBRARIES fmt::fmt)
-  else()
-    add_definitions(-DFMT_HEADER_ONLY)
-    include_directories(SYSTEM ${PROJECT_SOURCE_DIR}/external/fmtlib/include)
-    # Not sure why this is needed.
-    list(APPEND EXTRA_INCLUDES ${PROJECT_SOURCE_DIR}/external/fmtlib/include)
-  endif()
-endif()
-
-if(OPM_ENABLE_EMBEDDED_PYTHON AND NOT OPM_ENABLE_PYTHON)
-  # This needs to be here to run before source_hook
-  message(WARNING "Inconsistent settings: OPM_ENABLE_PYTHON=OFF and "
-    "OPM_ENABLE_EMBEDDED_PYTHON=ON. Please use OPM_ENABLE_PYTHON=ON to "
-    "activate. Will disable embedded python in this run.")
-  set(OPM_ENABLE_EMBEDDED_PYTHON OFF CACHE BOOL "Enable embedded python?" FORCE)
-endif()
 # read the list of components from this file (in the project directory);
 # it should set various lists with the names of the files to include
 include (CMakeLists_files.cmake)
@@ -96,9 +73,9 @@ macro (config_hook)
     if(NOT cjson_FOUND)
       list(APPEND EXTRA_INCLUDES ${PROJECT_SOURCE_DIR}/external/cjson)
     endif()
-
     # For this project
     include_directories(${EXTRA_INCLUDES} ${PROJECT_BINARY_DIR}/include)
+
     # For downstreams
     list(APPEND EXTRA_INCLUDES ${PROJECT_BINARY_DIR}/include)
     set(OPM_PROJECT_EXTRA_CODE_INTREE "${OPM_PROJECT_EXTRA_CODE_INTREE}
@@ -116,7 +93,8 @@ macro (config_hook)
                                             set(HAVE_ECL_OUTPUT 1)")
     endif()
 
-    find_package(Boost COMPONENTS filesystem regex system unit_test_framework)
+    # Configure boost targets for old cmake
+    include(cmake/Modules/BoostTargets.cmake)
 
     if (HAVE_DYNAMIC_BOOST_TEST)
       set_target_properties(Boost::unit_test_framework PROPERTIES INTERFACE_COMPILE_DEFINITIONS BOOST_TEST_DYN_LINK=1)
@@ -136,13 +114,9 @@ macro (sources_hook)
     list(INSERT opm-common_SOURCES 0 ${PROJECT_BINARY_DIR}/ParserInit.cpp)
     foreach (name A B C D E F G H I J K L M N O P Q R S T U V W X Y Z)
         list(INSERT opm-common_SOURCES 0 ${PROJECT_BINARY_DIR}/ParserKeywords/${name}.cpp)
-        list(INSERT opm-common_HEADERS 0 ${PROJECT_BINARY_DIR}/include/opm/input/eclipse/Parser/ParserKeywords/${name}.hpp)
     endforeach()
-    if (OPM_ENABLE_EMBEDDED_PYTHON)
-      list(INSERT opm-common_SOURCES 0 ${PROJECT_BINARY_DIR}/python/cxx/builtin_pybind11.cpp)
-    endif()
   endif()
-  set_source_files_properties(src/opm/input/eclipse/Python/Python.cpp
+  set_source_files_properties(src/opm/parser/eclipse/Python/Python.cpp
                               PROPERTIES COMPILE_FLAGS -Wno-shadow)
 endmacro (sources_hook)
 
@@ -164,14 +138,6 @@ macro (install_hook)
           PATTERN *.hpp)
 endmacro (install_hook)
 
-# Used to append entries from one list to another.
-# The output list is suitable for use in setup.py subtitution
-macro(append_quoted OUT IN)
-  foreach(ENTRY ${${IN}})
-    list(APPEND ${OUT} "'${ARGN}${ENTRY}'")
-  endforeach()
-endmacro()
-
 # If opm-common is configured to embed the python interpreter we must make sure
 # that all downstream modules link libpython transitively. Due to the required
 # integration with Python+cmake machinery provided by pybind11 this is done by
@@ -179,83 +145,10 @@ endmacro()
 # OpmnLibMain function. Here only the library dependency is implemented, the
 # bulk of the python configuration is further down in the file.
 if (OPM_ENABLE_PYTHON)
-  # We need to be compatible with older CMake versions
-  # that do not offer FindPython3
-  # e.g. Ubuntu LTS 18.04 uses cmake 3.10
-  if(${CMAKE_VERSION} VERSION_LESS "3.12.0")
-    find_package(PythonInterp REQUIRED)
-    if (OPM_ENABLE_EMBEDDED_PYTHON)
-      find_package(PythonLibs REQUIRED)
-      list(APPEND opm-common_LIBRARIES ${PYTHON_LIBRARIES})
-    endif()
-    if(PYTHON_VERSION_MAJOR LESS 3)
-      message(SEND_ERROR "OPM requires version 3 of Python but only version ${PYTHON_VERSION_STRING} was found")
-    endif()
-    set(Python3_EXECUTABLE ${PYTHON_EXECUTABLE})
-    set(Python3_LIBRARIES ${PYTHON_LIBRARIES})
-    set(Python3_VERSION "${PYTHON_VERSION_STRING}")
-    set(Python3_VERSION_MINOR ${PYTHON_VERSION_MINOR})
-  else()
-    # Be backwards compatible.
-    if(PYTHON_EXECUTABLE AND NOT Python3_EXECUTABLE)
-      set(Python3_EXECUTABLE ${PYTHON_EXECUTABLE})
-    endif()
-    if (OPM_ENABLE_EMBEDDED_PYTHON)
-      find_package(Python3 REQUIRED COMPONENTS Interpreter Development)
-      get_target_property(_lib_path Python3::Python IMPORTED_LOCATION)
-      set(PYTHON_LIBRARY ${_lib_path})
-      set(PYTHON_LIBRARIES {PYTHON_LIBRARY})
-      list(APPEND opm-common_LIBRARIES ${PYTHON_LIBRARY})
-      set(PYTHON_INCLUDE_DIRS ${Python3_INCLUDE_DIRS})
-    else()
-      find_package(Python3 REQUIRED COMPONENTS Interpreter)
-    endif()
-    # Make sure we fail gracefully here without setuptool
-    execute_process(COMMAND ${Python3_EXECUTABLE} -c "import setuptools"
-      WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
-      ERROR_VARIABLE SETUPTOOL_ERROR OUTPUT_VARIABLE SETUPTOOL_OUT
-      RESULT_VARIABLE SETUPTOOL_RESULT)
-    if(SETUPTOOL_RESULT GREATER 0)
-      message(WARNING "Trying to test setuptools resulted in error message: ${SETUPTOOL_ERROR}")
-      message(SEND_ERROR "To build the python bindings you need to install setuptool. "
-        "Either use \"apt-get install python3-setuptools\" (on Debian/Ubuntu) "
-        "or \"pip install setuptools\"")
-    endif()
-    if(Python3_VERSION_MINOR LESS 3)
-      # Python native namespace packages requires python >= 3.3
-      message(SEND_ERROR "OPM requires python >= 3.3 but only version ${Python3_VERSION} was found")
-    endif()
-
-    # Compatibility settings for PythonInterp and PythonLibs
-    # used e.g. in FindCwrap, pybind11
-    set(PYTHON_EXECUTABLE ${Python3_EXECUTABLE})
-    # Directory to install common (for opm modules) python scripts
-    include (GNUInstallDirs)
-    set(OPM_PYTHON_COMMON_DIR "${CMAKE_INSTALL_DATAROOTDIR}/opm/python")
-    set(OPM_PROJECT_EXTRA_CODE_INTREE "${OPM_PROJECT_EXTRA_CODE_INTREE}
-                                       set(opm-common_PYTHON_COMMON_DIR ${PROJECT_SOURCE_DIR}/python)")
-    set(OPM_PROJECT_EXTRA_CODE_INSTALLED "${OPM_PROJECT_EXTRA_CODE_INSTALLED}
-                                         set(opm-common_PYTHON_COMMON_DIR ${CMAKE_INSTALL_PREFIX}/${OPM_PYTHON_COMMON_DIR})")
-  endif()
-  # We always need the PYTHON_INCLUDE_DIR. Unfortunately
-  # When we build pypi packages CMake will fail to determine
-  # these via the usual find_package(PythonLibs or
-  # find_package(Python3 REQUIRED COMPONENTS Interpreter Development)
-  # Hence we overwrite them here.
-  if(NOT PYTHON_INCLUDE_DIRS)
-    execute_process(COMMAND "${PYTHON_EXECUTABLE}" "-c" "from distutils import sysconfig; print(sysconfig.get_python_inc(plat_specific=True), end=\"\");"
-      RESULT_VARIABLE _PYTHON_DIR_SUCCESS
-      OUTPUT_VARIABLE PYTHON_INCLUDE_DIR
-      ERROR_VARIABLE _PYTHON_ERROR_VALUE)
-    if(NOT _PYTHON_DIR_SUCCESS MATCHES 0)
-      message(FATAL_ERROR "Could not determine Python include directory. Error: ${_PYTHON_ERROR_VALUE}.")
-    endif()
-    set(PYTHON_INCLUDE_DIRS ${PYTHON_INCLUDE_DIR})
-  endif()
-  find_package(pybind11 2.2 CONFIG)
-  if (NOT pybind11_FOUND)
-    # Use full path for reuse with pypi
-    set(pybind11_INCLUDE_DIRS ${PROJECT_SOURCE_DIR}/python/pybind11/include ${PYTHON_INCLUDE_DIRS})
+  find_package(PythonInterp REQUIRED)
+  if (OPM_ENABLE_EMBEDDED_PYTHON)
+    find_package(PythonLibs REQUIRED)
+    list(APPEND opm-common_LIBRARIES ${PYTHON_LIBRARY})
   endif()
 endif()
 
@@ -300,15 +193,11 @@ if(ENABLE_ECL_INPUT)
     test_util/summary.cpp
     )
 
-  add_executable(arraylist
-    test_util/arraylist.cpp
+  add_executable(test_esmry_lod
+    test_util/test_esmry_lod.cpp
     )
 
-  add_executable(rewriteEclFile
-    test_util/rewriteEclFile.cpp
-    )
-
-  foreach(target compareECL convertECL summary rewriteEclFile arraylist)
+  foreach(target compareECL convertECL summary test_esmry_lod)
     target_link_libraries(${target} opmcommon)
     install(TARGETS ${target} DESTINATION bin)
   endforeach()
@@ -342,31 +231,38 @@ if(ENABLE_ECL_INPUT)
       ${PROJECT_BINARY_DIR}/tests
     )
 
+  foreach(test test_EclIO test_EGrid test_ERft test_ERst test_ESmry)
+    opm_add_test(${test} CONDITION ENABLE_ECL_INPUT AND Boost_UNIT_TEST_FRAMEWORK_FOUND
+                         LIBRARIES ${_libs}
+                         WORKING_DIRECTORY ${PROJECT_BINARY_DIR}/tests)
+  endforeach()
 endif()
 
-# Install build system files and documentation
-install(DIRECTORY cmake
-  DESTINATION share/opm USE_SOURCE_PERMISSIONS
-  PATTERN "OPM-CMake.md" EXCLUDE)
-
-install(FILES cmake/OPM-CMake.md
-  DESTINATION ${CMAKE_INSTALL_DOCDIR})
+# Install build system files
+install(DIRECTORY cmake DESTINATION share/opm)
 
 # Install tab completion skeleton
 install(FILES etc/opm_bash_completion.sh.in DESTINATION share/opm/etc)
 
 if (OPM_ENABLE_PYTHON)
-  include(PyInstallPrefix)
+  # -------------------------------------------------------------------------
+  # 1: Wrap C++ functionality in Python
+  if (EXISTS "/etc/debian_version")
+    set(PYTHON_PACKAGE_PATH "dist-packages")
+  else()
+    set(PYTHON_PACKAGE_PATH "site-packages")
+  endif()
+  set(PYTHON_INSTALL_PREFIX "lib/python${PYTHON_VERSION_MAJOR}.${PYTHON_VERSION_MINOR}/${PYTHON_PACKAGE_PATH}" CACHE STRING "Subdirectory to install Python modules in")
+
   make_directory(${PROJECT_BINARY_DIR}/python)
   get_target_property(_opmcommon_include_dirs opmcommon INCLUDE_DIRECTORIES)
   list(APPEND _opmcommon_include_dirs ${_ecl_include_dirs})
   string(REPLACE ";" ":" _setup_include_dirs "${_opmcommon_include_dirs}")
 
-  get_target_property(_opmcommon_lib_dirs opmcommon LINK_DIRECTORIES)
   if (CMAKE_PREFIX_PATH)
-    list(APPEND _opmcommon_lib_dirs ${PROJECT_BINARY_DIR}/lib ${CMAKE_PREFIX_PATH}/${CMAKE_INSTALL_LIBDIR})
+    set(_opmcommon_lib_dirs ${PROJECT_BINARY_DIR}/lib ${CMAKE_PREFIX_PATH}/${CMAKE_INSTALL_LIBDIR})
   else()
-    list(APPEND _opmcommon_lib_dirs ${PROJECT_BINARY_DIR}/lib)
+    set(_opmcommon_lib_dirs ${PROJECT_BINARY_DIR}/lib)
   endif()
   string(REPLACE ";" ":" _setup_lib_dirs "${_opmcommon_lib_dirs}")
 
@@ -379,12 +275,7 @@ if (OPM_ENABLE_PYTHON)
     endif()
 
     if (BUILD_SHARED_LIBS)
-      if (OPM_INSTALL_PYTHON)
-        list(APPEND _python_rpath_list "${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_LIBDIR}")
-        list(APPEND _python_rpath_list "${PROJECT_BINARY_DIR}/lib")
-      else()
-        list(APPEND _python_rpath_list "${PROJECT_BINARY_DIR}/lib")
-      endif()
+      list(APPEND _python_rpath_list "${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_LIBDIR}")
     endif()
 
     if (_python_rpath_list)
@@ -397,61 +288,26 @@ if (OPM_ENABLE_PYTHON)
     set( _rpath_arg "")
   endif()
 
-  set(opm-common_PYTHON_PACKAGE_VERSION ${OPM_PYTHON_PACKAGE_VERSION_TAG})
-  set(SETUP_PY_FLAGS "'-std=c++17'")
-
-  # Generate versioned setup.py
-  if (pybind11_INCLUDE_DIRS)
-    append_quoted(SETUP_PY_INCLUDE_DIRS pybind11_INCLUDE_DIRS)
-  endif()
-
-  if (TARGET fmt::fmt)
-     get_target_property(SETUP_PY_FMT_LIBS fmt::fmt LOCATION)
-     get_target_property(FMT_FLAGS fmt::fmt INTERFACE_COMPILE_DEFINITIONS)
-     append_quoted(SETUP_PY_FLAGS FMT_FLAGS "-D")
-     append_quoted(opm-common_PYTHON_LINKAGE SETUP_PY_FMT_LIBS)
-  else()
-    list(APPEND SETUP_PY_FLAGS "'-DFMT_HEADER_ONLY'")
-  endif()
-
-  if(cjson_FOUND)
-    append_quoted(opm-common_PYTHON_LINKAGE cjson_LIBRARIES)
-    append_quoted(SETUP_PY_INCLUDE_DIRS cjson_INCLUDE_DIRS)
-  endif()
-
-  if(OpenMP_FOUND)
-    append_quoted(opm-common_PYTHON_LINKAGE OpenMP_CXX_LIBRARIES)
-    append_quoted(SETUP_PY_FLAGS OpenMP_CXX_FLAGS)
-    append_quoted(SETUP_PY_INCLUDE_DIRS OpenMP_CXX_INCLUDE_DIRS)
-  endif()
-
-  # Items need to be comma separated for setup.py generation
-  string(REPLACE ";" "," SETUP_PY_LINKAGE "${opm-common_PYTHON_LINKAGE}")
-  string(REPLACE ";" "," SETUP_PY_FLAGS "${SETUP_PY_FLAGS}")
-  string(REPLACE ";" "," SETUP_PY_INCLUDE_DIRS "${SETUP_PY_INCLUDE_DIRS}")
-
-  configure_file (${PROJECT_SOURCE_DIR}/python/setup.py.in ${PROJECT_BINARY_DIR}/python/setup.py)
-  file(COPY ${PROJECT_SOURCE_DIR}/python/README.md DESTINATION ${PROJECT_BINARY_DIR}/python)
-  execute_process(COMMAND ${Python3_EXECUTABLE} target_name.py
+  execute_process(COMMAND ${PYTHON_EXECUTABLE} target_name.py
                   WORKING_DIRECTORY ${PROJECT_SOURCE_DIR}/python
                   OUTPUT_VARIABLE python_lib_target)
 
   add_custom_target(copy_python ALL
-    COMMAND ${Python3_EXECUTABLE} ${PROJECT_SOURCE_DIR}/python/install.py ${PROJECT_SOURCE_DIR}/python ${PROJECT_BINARY_DIR} 0)
+    COMMAND ${PYTHON_EXECUTABLE} ${PROJECT_SOURCE_DIR}/python/install.py ${PROJECT_SOURCE_DIR}/python ${PROJECT_BINARY_DIR} 0)
 
-  add_custom_command(OUTPUT python/opm/${python_lib_target}
+  add_custom_command(OUTPUT python/python/opm/${python_lib_target}
                      DEPENDS ${PYTHON_CXX_DEPENDS}
                      DEPENDS copy_python
-                     COMMAND ${Python3_EXECUTABLE} ${PROJECT_BINARY_DIR}/python/setup.py
+                     COMMAND ${PYTHON_EXECUTABLE} ${PROJECT_BINARY_DIR}/python/setup.py
                                                       build
                                                       build_ext
-                                                      --build-lib=${PROJECT_BINARY_DIR}/python
+                                                      --build-lib=${PROJECT_BINARY_DIR}/python/python/opm
                                                       --library-dirs=${_setup_lib_dirs}
                                                       ${_rpath_arg}
                                                       --include-dirs=${_setup_include_dirs}
                      WORKING_DIRECTORY ${PROJECT_BINARY_DIR}/python
-                     COMMENT "Building python bindings at python/opm/${python_lib_target}")
-  add_custom_target(opmcommon_python ALL DEPENDS python/opm/${python_lib_target})
+                     COMMENT "Building python bindings")
+  add_custom_target(opmcommon_python ALL DEPENDS python/python/opm/${python_lib_target})
   add_dependencies(opmcommon_python opmcommon)
 
   # The install target is based on manually copying the python file tree to the
@@ -466,10 +322,7 @@ if (OPM_ENABLE_PYTHON)
   # setup.py install manually - optionally with the generated script
   # setup-install.sh - and completely bypass cmake in the installation phase.
   if (OPM_INSTALL_PYTHON)
-    install( CODE "execute_process(COMMAND ${Python3_EXECUTABLE} ${PROJECT_BINARY_DIR}/python/install.py ${PROJECT_BINARY_DIR}/python/opm ${DEST_PREFIX}${CMAKE_INSTALL_PREFIX}/${PYTHON_INSTALL_PREFIX} 1)")
-    ## Need to install this Python script such that it can be used by opm-simulators when building against an installed
-    ##  opm-common
-    install( PROGRAMS "python/install.py" DESTINATION "${OPM_PYTHON_COMMON_DIR}" )
+    install( CODE "execute_process(COMMAND ${PYTHON_EXECUTABLE} ${PROJECT_BINARY_DIR}/python/install.py ${PROJECT_BINARY_DIR}/python/python/opm ${DEST_PREFIX}${CMAKE_INSTALL_PREFIX}/${PYTHON_INSTALL_PREFIX} 1)")
   endif()
 
   # Observe that if the opmcommon library has been built as a shared library the
@@ -477,11 +330,11 @@ if (OPM_ENABLE_PYTHON)
   # testing.
   add_test(NAME python_tests
            WORKING_DIRECTORY ${PROJECT_BINARY_DIR}/python
-           COMMAND ${CMAKE_COMMAND} -E env LD_LIBRARY_PATH=${PROJECT_BINARY_DIR}/lib ${Python3_EXECUTABLE} setup.py build_ext --dry-run --build-lib ${PROJECT_BINARY_DIR}/python test
+           COMMAND ${CMAKE_COMMAND} -E env LD_LIBRARY_PATH=${PROJECT_BINARY_DIR}/lib ${PYTHON_EXECUTABLE} setup.py build_ext --dry-run --build-lib ${PROJECT_BINARY_DIR}/python/python/opm test
            )
 
   set_target_properties(opmcommon PROPERTIES POSITION_INDEPENDENT_CODE ON)
-  set_directory_properties(PROPERTIES ADDITIONAL_MAKE_CLEAN_FILES ${PROJECT_BINARY_DIR}/python)
+  set_directory_properties(PROPERTIES ADDITIONAL_MAKE_CLEAN_FILES ${PROJECT_BINARY_DIR}/python/python)
 
   # -------------------------------------------------------------------------
   # Let cmake configure some small shell scripts which can be used to simplify
@@ -491,11 +344,6 @@ if (OPM_ENABLE_PYTHON)
         DESTINATION ${PROJECT_BINARY_DIR}
         FILE_PERMISSIONS OWNER_READ OWNER_WRITE OWNER_EXECUTE )
 
-  configure_file(python/setup-package.sh.in tmp/setup-package.sh)
-  file( COPY ${PROJECT_BINARY_DIR}/tmp/setup-package.sh
-        DESTINATION ${PROJECT_BINARY_DIR}
-        FILE_PERMISSIONS OWNER_READ OWNER_WRITE OWNER_EXECUTE )
-
   configure_file(python/setup-test.sh.in tmp/setup-test.sh)
   file( COPY ${PROJECT_BINARY_DIR}/tmp/setup-test.sh
         DESTINATION ${PROJECT_BINARY_DIR}
@@ -510,12 +358,11 @@ if (OPM_ENABLE_PYTHON)
 
   # -------------------------------------------------------------------------
   # 2: Embed the Python interpreter for keywords like PYACTION and PYINPUT
-  target_include_directories(opmcommon SYSTEM PRIVATE "${pybind11_INCLUDE_DIRS}")
   if (OPM_ENABLE_EMBEDDED_PYTHON)
+    add_subdirectory(python/pybind11)
+    target_include_directories(opmcommon SYSTEM PRIVATE "python/pybind11/include;${PYTHON_INCLUDE_DIRS}")
     target_link_libraries(opmcommon PUBLIC ${PYTHON_LIBRARY})
+
     add_definitions(-DEMBEDDED_PYTHON)
   endif()
 endif()
-
-install(DIRECTORY docs/man1 DESTINATION ${CMAKE_INSTALL_MANDIR}
-  FILES_MATCHING PATTERN "*.1")

CopyHeaders.cmake

@@ -6,24 +6,14 @@ execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different
                         ${BASE_DIR}/tmp_gen/TestKeywords.cpp
                         ${BASE_DIR}/TestKeywords.cpp)
 
-if (EXISTS ${BASE_DIR}/python/cxx)
-  execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different
-                          ${BASE_DIR}/tmp_gen/builtin_pybind11.cpp
-                          ${BASE_DIR}/python/cxx/builtin_pybind11.cpp)
-endif()
 
-execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different
-                        ${BASE_DIR}/tmp_gen/include/opm/input/eclipse/Parser/ParserKeywords/Builtin.hpp
-                        ${BASE_DIR}/include/opm/input/eclipse/Parser/ParserKeywords/Builtin.hpp)
-
-
-file(GLOB HDRS ${BASE_DIR}/tmp_gen/include/opm/input/eclipse/Parser/ParserKeywords/*.hpp)
+file(GLOB HDRS ${BASE_DIR}/tmp_gen/include/opm/parser/eclipse/Parser/ParserKeywords/*.hpp)
 
 foreach(HDR ${HDRS})
-  file(RELATIVE_PATH hdr ${BASE_DIR}/tmp_gen/include/opm/input/eclipse/Parser/ParserKeywords ${HDR})
+  file(RELATIVE_PATH hdr ${BASE_DIR}/tmp_gen/include/opm/parser/eclipse/Parser/ParserKeywords ${HDR})
   execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different
                           ${HDR}
-                          ${BASE_DIR}/include/opm/input/eclipse/Parser/ParserKeywords/${hdr})
+                          ${BASE_DIR}/include/opm/parser/eclipse/Parser/ParserKeywords/${hdr})
 
 endforeach()
 

ExtraTests.cmake

@@ -18,13 +18,13 @@ set(_testdir ${PROJECT_SOURCE_DIR}/tests/parser/data)
 opm_add_test(ParserTests
              SOURCES tests/parser/ParserTests.cpp
              LIBRARIES ${TEST_LIBS}
-             TEST_ARGS -- ${_testdir}/)
+             TEST_ARGS ${_testdir}/)
 list(APPEND EXTRA_TESTS ParserTests)
 
 opm_add_test(ParserIncludeTests
              SOURCES tests/parser/ParserIncludeTests.cpp
              LIBRARIES ${TEST_LIBS}
-             TEST_ARGS -- ${_testdir}/parser/)
+             TEST_ARGS ${_testdir}/parser/)
 target_compile_definitions(ParserIncludeTests PRIVATE
                            -DHAVE_CASE_SENSITIVE_FILESYSTEM=${HAVE_CASE_SENSITIVE_FILESYSTEM})
 list(APPEND EXTRA_TESTS ParserIncludeTests)
@@ -32,21 +32,23 @@ list(APPEND EXTRA_TESTS ParserIncludeTests)
 opm_add_test(PvtxTableTests
              SOURCES tests/parser/PvtxTableTests.cpp
              LIBRARIES ${TEST_LIBS}
-             TEST_ARGS -- ${_testdir}/integration_tests/)
+             TEST_ARGS ${_testdir}/integration_tests/)
 list(APPEND EXTRA_TESTS PvtxTableTests)
 
 opm_add_test(EclipseStateTests
              SOURCES tests/parser/EclipseStateTests.cpp
              LIBRARIES ${TEST_LIBS}
-             TEST_ARGS -- ${_testdir}/integration_tests/)
+             TEST_ARGS ${_testdir}/integration_tests/)
 list(APPEND EXTRA_TESTS EclipseStateTests)
 
 foreach (test BoxTest
               CheckDeckValidity
               EclipseGridCreateFromDeck
+              EDITNNCTests
               IncludeTest
               IntegrationTests
               IOConfigIntegrationTest
+              NNCTests
               ParseKEYWORD
               Polymer
               ScheduleCreateFromDeck
@@ -55,23 +57,19 @@ foreach (test BoxTest
   opm_add_test(${test}
                SOURCES tests/parser/integration/${test}.cpp
                LIBRARIES ${TEST_LIBS}
-               TEST_ARGS -- ${_testdir}/integration_tests/)
+               TEST_ARGS ${_testdir}/integration_tests/)
   list(APPEND EXTRA_TESTS ${test})
 endforeach ()
 
-add_test( NAME rst_deck_test
-          COMMAND ${PROJECT_SOURCE_DIR}/tests/rst_test_driver.sh ${PROJECT_BINARY_DIR}/bin/rst_deck ${PROJECT_BINARY_DIR}/bin/opmhash
-          ${PROJECT_SOURCE_DIR}/tests/SPE1CASE2_INCLUDE.DATA)
+opm_add_test( rst_spe1
+              SOURCES tests/rst_test.cpp
+              LIBRARIES ${TEST_LIBS}
+              TEST_ARGS tests/SPE1CASE2.DATA tests/SPE1CASE2_RESTART.DATA )
 
-
-add_test( NAME rst_deck_test2
-          COMMAND ${PROJECT_SOURCE_DIR}/tests/rst_test_driver2.sh
-                  ${PROJECT_BINARY_DIR}/bin/rst_deck
-                  ${PROJECT_BINARY_DIR}/bin/opmi
-                  ${PROJECT_SOURCE_DIR}/tests/ACTIONX_M1.DATA
-                  ${PROJECT_SOURCE_DIR}/tests/ACTIONX_M1_MULTIPLE.DATA
-                  ${PROJECT_SOURCE_DIR}/tests/ACTIONX_M1.UNRST
-                  ${PROJECT_SOURCE_DIR}/tests/ACTIONX_M1.X0010 )
+opm_add_test( rst_msw
+              SOURCES tests/rst_test.cpp
+              LIBRARIES ${TEST_LIBS}
+              TEST_ARGS tests/MSW.DATA tests/MSW_RESTART.DATA )
 
 # opm-tests dependent tests
 if(HAVE_OPM_TESTS)
@@ -93,7 +91,10 @@ if(HAVE_OPM_TESTS)
                 ${OPM_TESTS_ROOT}/spe9/SPE9_CP.DATA
                 ${OPM_TESTS_ROOT}/spe9/SPE9_CP_GROUP.DATA
                 ${OPM_TESTS_ROOT}/spe9/SPE9_CP_SHORT.DATA
+                ${OPM_TESTS_ROOT}/spe9/SPE9_CP_SHORT_RESTART.DATA
                 ${OPM_TESTS_ROOT}/spe9/SPE9.DATA
+                ${OPM_TESTS_ROOT}/spe10model1/SPE10_MODEL1.DATA
+                ${OPM_TESTS_ROOT}/spe10model2/SPE10_MODEL2.DATA
                 ${OPM_TESTS_ROOT}/msw_2d_h/2D_H__.DATA
                 ${OPM_TESTS_ROOT}/model2/0_BASE_MODEL2.DATA
                 ${OPM_TESTS_ROOT}/model2/1_MULTREGT_MODEL2.DATA
@@ -114,17 +115,8 @@ if(HAVE_OPM_TESTS)
   opm_add_test("SPE9_CP_GROUP2" NO_COMPILE EXE_NAME parse_write TEST_ARGS "${OPM_TESTS_ROOT}/spe9group/SPE9_CP_GROUP.DATA")
   set_property(TEST NORNE_ATW2013
                PROPERTY ENVIRONMENT "OPM_ERRORS_IGNORE=PARSE_RANDOM_SLASH")
-
-  add_test( NAME rst_deck_test_norne
-             COMMAND ${PROJECT_SOURCE_DIR}/tests/rst_test_driver.sh ${PROJECT_BINARY_DIR}/bin/rst_deck ${PROJECT_BINARY_DIR}/bin/opmhash
-             ${OPM_TESTS_ROOT}/norne/NORNE_ATW2013.DATA)
-
-  set_property(TEST rst_deck_test_norne
-               PROPERTY ENVIRONMENT "OPM_ERRORS_IGNORE=PARSE_RANDOM_SLASH")
-
 endif()
 
-
 # JSON tests
 opm_add_test(jsonTests
              SOURCES tests/json/jsonTests.cpp

GenerateKeywords.cmake

@@ -1,30 +1,26 @@
 set(genkw_SOURCES src/opm/json/JsonObject.cpp
-                  src/opm/input/eclipse/Parser/createDefaultKeywordList.cpp
-                  src/opm/input/eclipse/Deck/UDAValue.cpp
-                  src/opm/input/eclipse/Deck/DeckTree.cpp
-                  src/opm/input/eclipse/Deck/DeckValue.cpp
-                  src/opm/input/eclipse/Deck/Deck.cpp
-                  src/opm/input/eclipse/Deck/DeckView.cpp
-                  src/opm/input/eclipse/Deck/DeckItem.cpp
-                  src/opm/input/eclipse/Deck/DeckKeyword.cpp
-                  src/opm/input/eclipse/Deck/DeckRecord.cpp
-                  src/opm/input/eclipse/Deck/DeckOutput.cpp
-                  src/opm/input/eclipse/Generator/KeywordGenerator.cpp
-                  src/opm/input/eclipse/Generator/KeywordLoader.cpp
-                  src/opm/input/eclipse/Schedule/UDQ/UDQEnums.cpp
-                  src/opm/input/eclipse/Parser/ErrorGuard.cpp
-                  src/opm/input/eclipse/Parser/ParseContext.cpp
-                  src/opm/input/eclipse/Parser/ParserEnums.cpp
-                  src/opm/input/eclipse/Parser/ParserItem.cpp
-                  src/opm/input/eclipse/Parser/ParserKeyword.cpp
-                  src/opm/input/eclipse/Parser/ParserRecord.cpp
-                  src/opm/input/eclipse/Parser/raw/RawKeyword.cpp
-                  src/opm/input/eclipse/Parser/raw/RawRecord.cpp
-                  src/opm/input/eclipse/Parser/raw/StarToken.cpp
-                  src/opm/input/eclipse/Units/Dimension.cpp
-                  src/opm/input/eclipse/Units/UnitSystem.cpp
-                  src/opm/common/utility/OpmInputError.cpp
-                  src/opm/common/utility/shmatch.cpp
+                  src/opm/parser/eclipse/Parser/createDefaultKeywordList.cpp
+                  src/opm/parser/eclipse/Deck/UDAValue.cpp
+                  src/opm/parser/eclipse/Deck/DeckValue.cpp
+                  src/opm/parser/eclipse/Deck/Deck.cpp
+                  src/opm/parser/eclipse/Deck/DeckItem.cpp
+                  src/opm/parser/eclipse/Deck/DeckKeyword.cpp
+                  src/opm/parser/eclipse/Deck/DeckRecord.cpp
+                  src/opm/parser/eclipse/Deck/DeckOutput.cpp
+                  src/opm/parser/eclipse/Generator/KeywordGenerator.cpp
+                  src/opm/parser/eclipse/Generator/KeywordLoader.cpp
+                  src/opm/parser/eclipse/Parser/ErrorGuard.cpp
+                  src/opm/parser/eclipse/Parser/ParseContext.cpp
+                  src/opm/parser/eclipse/Parser/ParserEnums.cpp
+                  src/opm/parser/eclipse/Parser/ParserItem.cpp
+                  src/opm/parser/eclipse/Parser/ParserKeyword.cpp
+                  src/opm/parser/eclipse/Parser/ParserRecord.cpp
+                  src/opm/parser/eclipse/Parser/raw/RawKeyword.cpp
+                  src/opm/parser/eclipse/Parser/raw/RawRecord.cpp
+                  src/opm/parser/eclipse/Parser/raw/StarToken.cpp
+                  src/opm/parser/eclipse/Units/Dimension.cpp
+                  src/opm/parser/eclipse/Units/UnitSystem.cpp
+                  src/opm/parser/eclipse/Utility/Stringview.cpp
                   src/opm/common/OpmLog/OpmLog.cpp
                   src/opm/common/OpmLog/Logger.cpp
                   src/opm/common/OpmLog/StreamLog.cpp
@@ -39,47 +35,79 @@ add_executable(genkw ${genkw_SOURCES})
 target_link_libraries(genkw ${opm-common_LIBRARIES})
 
 # Generate keyword list
-include(src/opm/input/eclipse/share/keywords/keyword_list.cmake)
-string(REGEX REPLACE "([^;]+)" "${PROJECT_SOURCE_DIR}/src/opm/input/eclipse/share/keywords/\\1" keyword_files "${keywords}")
-configure_file(src/opm/input/eclipse/keyword_list.argv.in keyword_list.argv)
+include(src/opm/parser/eclipse/share/keywords/keyword_list.cmake)
+string(REGEX REPLACE "([^;]+)" "${PROJECT_SOURCE_DIR}/src/opm/parser/eclipse/share/keywords/\\1" keyword_files "${keywords}")
+configure_file(src/opm/parser/eclipse/keyword_list.argv.in keyword_list.argv)
 
 # Generate keyword source
 
-set( genkw_argv keyword_list.argv
-  ${PROJECT_BINARY_DIR}/tmp_gen/ParserKeywords
-  ${PROJECT_BINARY_DIR}/tmp_gen/ParserInit.cpp
-  ${PROJECT_BINARY_DIR}/tmp_gen/include/
-  opm/input/eclipse/Parser/ParserKeywords
-  ${PROJECT_BINARY_DIR}/tmp_gen/TestKeywords.cpp)
-
-foreach (name A B C D E F G H I J K L M N O P Q R S T U V W X Y Z)
-  list(APPEND _tmp_output ${PROJECT_BINARY_DIR}/tmp_gen/ParserKeywords/${name}.cpp
-                          ${PROJECT_BINARY_DIR}/tmp_gen/include/opm/input/eclipse/Parser/ParserKeywords/${name}.hpp)
-  list(APPEND _target_output ${PROJECT_BINARY_DIR}/ParserKeywords/${name}.cpp
-                             ${PROJECT_BINARY_DIR}/include/opm/input/eclipse/Parser/ParserKeywords/${name}.hpp)
-endforeach()
-
-foreach(name TestKeywords.cpp ParserInit.cpp)
-  list(APPEND _target_output ${PROJECT_BINARY_DIR}/${name})
-  list(APPEND _tmp_output ${PROJECT_BINARY_DIR}/tmp_gen/${name})
-endforeach()
-
-list(APPEND _target_output ${PROJECT_BINARY_DIR}/include/opm/input/eclipse/Parser/ParserKeywords/Builtin.hpp)
-list(APPEND _tmp_output ${PROJECT_BINARY_DIR}/tmp_gen/include/opm/input/eclipse/Parser/ParserKeywords/Builtin.hpp)
-
-if (OPM_ENABLE_PYTHON)
-  list(APPEND genkw_argv ${PROJECT_BINARY_DIR}/tmp_gen/builtin_pybind11.cpp)
-  list(APPEND _tmp_output ${PROJECT_BINARY_DIR}/tmp_gen/builtin_pybind11.cpp)
-  list(APPEND _target_output ${PROJECT_BINARY_DIR}/python/cxx/builtin_pybind11.cpp)
-endif()
-
 add_custom_command( OUTPUT
-  ${_tmp_output}
-  COMMAND genkw ${genkw_argv}
-  DEPENDS genkw ${keyword_files} src/opm/input/eclipse/share/keywords/keyword_list.cmake)
+  ${PROJECT_BINARY_DIR}/tmp_gen/ParserKeywords/A.cpp
+  ${PROJECT_BINARY_DIR}/tmp_gen/ParserKeywords/B.cpp
+  ${PROJECT_BINARY_DIR}/tmp_gen/ParserKeywords/C.cpp
+  ${PROJECT_BINARY_DIR}/tmp_gen/ParserKeywords/D.cpp
+  ${PROJECT_BINARY_DIR}/tmp_gen/ParserKeywords/E.cpp
+  ${PROJECT_BINARY_DIR}/tmp_gen/ParserKeywords/F.cpp
+  ${PROJECT_BINARY_DIR}/tmp_gen/ParserKeywords/G.cpp
+  ${PROJECT_BINARY_DIR}/tmp_gen/ParserKeywords/H.cpp
+  ${PROJECT_BINARY_DIR}/tmp_gen/ParserKeywords/I.cpp
+  ${PROJECT_BINARY_DIR}/tmp_gen/ParserKeywords/J.cpp
+  ${PROJECT_BINARY_DIR}/tmp_gen/ParserKeywords/K.cpp
+  ${PROJECT_BINARY_DIR}/tmp_gen/ParserKeywords/L.cpp
+  ${PROJECT_BINARY_DIR}/tmp_gen/ParserKeywords/M.cpp
+  ${PROJECT_BINARY_DIR}/tmp_gen/ParserKeywords/N.cpp
+  ${PROJECT_BINARY_DIR}/tmp_gen/ParserKeywords/O.cpp
+  ${PROJECT_BINARY_DIR}/tmp_gen/ParserKeywords/P.cpp
+  ${PROJECT_BINARY_DIR}/tmp_gen/ParserKeywords/Q.cpp
+  ${PROJECT_BINARY_DIR}/tmp_gen/ParserKeywords/R.cpp
+  ${PROJECT_BINARY_DIR}/tmp_gen/ParserKeywords/S.cpp
+  ${PROJECT_BINARY_DIR}/tmp_gen/ParserKeywords/T.cpp
+  ${PROJECT_BINARY_DIR}/tmp_gen/ParserKeywords/U.cpp
+  ${PROJECT_BINARY_DIR}/tmp_gen/ParserKeywords/V.cpp
+  ${PROJECT_BINARY_DIR}/tmp_gen/ParserKeywords/W.cpp
+  ${PROJECT_BINARY_DIR}/tmp_gen/ParserKeywords/X.cpp
+  ${PROJECT_BINARY_DIR}/tmp_gen/ParserKeywords/Y.cpp
+  ${PROJECT_BINARY_DIR}/tmp_gen/ParserKeywords/Z.cpp
+  ${PROJECT_BINARY_DIR}/tmp_gen/TestKeywords.cpp
+  COMMAND genkw keyword_list.argv
+                  ${PROJECT_BINARY_DIR}/tmp_gen/ParserKeywords
+                  ${PROJECT_BINARY_DIR}/tmp_gen/ParserInit.cpp
+                  ${PROJECT_BINARY_DIR}/tmp_gen/include/
+                  opm/parser/eclipse/Parser/ParserKeywords
+                  ${PROJECT_BINARY_DIR}/tmp_gen/TestKeywords.cpp
+    DEPENDS genkw ${keyword_files} src/opm/parser/eclipse/share/keywords/keyword_list.cmake
+)
 
 # To avoid some rebuilds
 add_custom_command(OUTPUT
-  ${_target_output}
-  DEPENDS ${_tmp_output}
-  COMMAND ${CMAKE_COMMAND} -DBASE_DIR=${PROJECT_BINARY_DIR} -P ${PROJECT_SOURCE_DIR}/CopyHeaders.cmake)
+  ${PROJECT_BINARY_DIR}/ParserKeywords/A.cpp
+  ${PROJECT_BINARY_DIR}/ParserKeywords/B.cpp
+  ${PROJECT_BINARY_DIR}/ParserKeywords/C.cpp
+  ${PROJECT_BINARY_DIR}/ParserKeywords/D.cpp
+  ${PROJECT_BINARY_DIR}/ParserKeywords/E.cpp
+  ${PROJECT_BINARY_DIR}/ParserKeywords/F.cpp
+  ${PROJECT_BINARY_DIR}/ParserKeywords/G.cpp
+  ${PROJECT_BINARY_DIR}/ParserKeywords/H.cpp
+  ${PROJECT_BINARY_DIR}/ParserKeywords/I.cpp
+  ${PROJECT_BINARY_DIR}/ParserKeywords/J.cpp
+  ${PROJECT_BINARY_DIR}/ParserKeywords/K.cpp
+  ${PROJECT_BINARY_DIR}/ParserKeywords/L.cpp
+  ${PROJECT_BINARY_DIR}/ParserKeywords/M.cpp
+  ${PROJECT_BINARY_DIR}/ParserKeywords/N.cpp
+  ${PROJECT_BINARY_DIR}/ParserKeywords/O.cpp
+  ${PROJECT_BINARY_DIR}/ParserKeywords/P.cpp
+  ${PROJECT_BINARY_DIR}/ParserKeywords/Q.cpp
+  ${PROJECT_BINARY_DIR}/ParserKeywords/R.cpp
+  ${PROJECT_BINARY_DIR}/ParserKeywords/S.cpp
+  ${PROJECT_BINARY_DIR}/ParserKeywords/T.cpp
+  ${PROJECT_BINARY_DIR}/ParserKeywords/U.cpp
+  ${PROJECT_BINARY_DIR}/ParserKeywords/V.cpp
+  ${PROJECT_BINARY_DIR}/ParserKeywords/W.cpp
+  ${PROJECT_BINARY_DIR}/ParserKeywords/X.cpp
+  ${PROJECT_BINARY_DIR}/ParserKeywords/Y.cpp
+  ${PROJECT_BINARY_DIR}/ParserKeywords/Z.cpp
+  ${PROJECT_BINARY_DIR}/TestKeywords.cpp
+  ${PROJECT_BINARY_DIR}/ParserInit.cpp
+                   DEPENDS ${PROJECT_BINARY_DIR}/tmp_gen/ParserKeywords/A.cpp
+                   COMMAND ${CMAKE_COMMAND} -DBASE_DIR=${PROJECT_BINARY_DIR}
+                                            -P ${PROJECT_SOURCE_DIR}/CopyHeaders.cmake)

README.md

@@ -1,23 +1,3 @@
-# opm-common: Tools for Eclipse reservoir simulation files
-
-The Open Porous Media (OPM) software suite provides libraries and
-tools for modeling and simulation of porous media processes,
-especially  for simulating CO2 sequestration and improved and enhanced
-oil recovery. The Eclipse file format is widely used in the reservoir
-simulation  community. This package provides a library containing code
-for processing files in Eclipse format, Python binding for accessing
-Eclipse files and  utility code used by other OPM modules (e.g. CMake
-modules used).
-
-License
--------
-
-The library is distributed under the GNU General Public License,
-version 3 or later (GPLv3+).
-
-Requirements
------------
-
-- C++17 compatible compiler
-- CMake >= 3.10
-- Posix compatibility
+# opm-common
+Contains common components used throughout all of OPM,
+in particular CMake modules for the build system.

cmake/Modules/BoostTargets.cmake

@@ -0,0 +1,49 @@
+# make targets for boost if find module did not do the job
+
+if(NOT TARGET Boost::system)
+  add_library(Boost::system UNKNOWN IMPORTED)
+  set_target_properties(Boost::system PROPERTIES
+      INTERFACE_INCLUDE_DIRECTORIES "${Boost_INCLUDE_DIRS}"
+      INTERFACE_SYSTEM_INCLUDE_DIRECTORIES "${Boost_INCLUDE_DIRS}"
+      IMPORTED_LOCATION         "${Boost_SYSTEM_LIBRARY}"
+      IMPORTED_LOCATION_DEBUG   "${Boost_SYSTEM_LIBRARY_DEBUG}"
+      IMPORTED_LOCATION_RELEASE "${Boost_SYSTEM_LIBRARY_RELEASE}"
+  )
+endif()
+
+if(NOT TARGET Boost::filesystem)
+  add_library(Boost::filesystem UNKNOWN IMPORTED)
+  set_target_properties(Boost::filesystem PROPERTIES
+     INTERFACE_INCLUDE_DIRECTORIES "${Boost_INCLUDE_DIRS}"
+      INTERFACE_SYSTEM_INCLUDE_DIRECTORIES "${Boost_INCLUDE_DIRS}"
+      INTERFACE_COMPILE_DEFINITIONS BOOST_FILESYSTEM_VERSION=3
+      INTERFACE_LINK_LIBRARIES  "${boost_system}"
+      IMPORTED_LOCATION         "${Boost_FILESYSTEM_LIBRARY}"
+      IMPORTED_LOCATION_DEBUG   "${Boost_FILESYSTEM_LIBRARY_DEBUG}"
+      IMPORTED_LOCATION_RELEASE "${Boost_FILESYSTEM_LIBRARY_RELEASE}"
+  )
+endif()
+
+if(NOT TARGET Boost::regex)
+  add_library(Boost::regex UNKNOWN IMPORTED)
+  set_target_properties(Boost::regex PROPERTIES
+      INTERFACE_INCLUDE_DIRECTORIES "${Boost_INCLUDE_DIRS}"
+      INTERFACE_SYSTEM_INCLUDE_DIRECTORIES "${Boost_INCLUDE_DIRS}"
+      INTERFACE_LINK_LIBRARIES  "${boost_system}"
+      IMPORTED_LOCATION         "${Boost_REGEX_LIBRARY}"
+      IMPORTED_LOCATION_DEBUG   "${Boost_REGEX_LIBRARY_DEBUG}"
+      IMPORTED_LOCATION_RELEASE "${Boost_REGEX_LIBRARY_RELEASE}"
+  )
+endif()
+
+if(NOT TARGET Boost::unit_test_framework)
+  add_library(Boost::unit_test_framework UNKNOWN IMPORTED)
+  set_target_properties(Boost::unit_test_framework PROPERTIES
+      INTERFACE_INCLUDE_DIRECTORIES "${Boost_INCLUDE_DIRS}"
+      INTERFACE_SYSTEM_INCLUDE_DIRECTORIES "${Boost_INCLUDE_DIRS}"
+      INTERFACE_LINK_LIBRARIES  "${boost_system}"
+      IMPORTED_LOCATION         "${Boost_UNIT_TEST_FRAMEWORK_LIBRARY}"
+      IMPORTED_LOCATION_DEBUG   "${Boost_UNIT_TEST_FRAMEWORK_LIBRARY_DEBUG}"
+      IMPORTED_LOCATION_RELEASE "${Boost_UNIT_TEST_FRAMEWORK_LIBRARY_RELEASE}"
+  )
+endif()

cmake/Modules/FindCwrap.cmake

@@ -0,0 +1,49 @@
+# Find the Python wrappers for module cwrap from ert
+#
+# Set the cache variable CWRAP_PYTHON_PATH to the install location of the root
+# ert package.
+
+find_package(PythonInterp)
+if(PYTHONINTERP_FOUND)
+
+  # We try to find the cwrap Python distribution. This is done by running Python
+  # code which tries to 'import cwrap' and prints out the path to the module if
+  # the import succeeds.
+  #
+  # The normal Python import machinery is employed, so if you have installed cwrap
+  # python in a default location, or alternatively set the PYTHONPATH variable the
+  # cwrap Python distribution will eventually be found there, independently of the
+  # alternatives which are tested with the ${PATH_LIST} variable.
+
+  if (EXISTS "/etc/debian_version")
+    set( PYTHON_PACKAGE_PATH "dist-packages")
+  else()
+    set( PYTHON_PACKAGE_PATH "site-packages")
+  endif()
+  set(PYTHON_INSTALL_PREFIX  "lib/python${PYTHON_VERSION_MAJOR}.${PYTHON_VERSION_MINOR}/${PYTHON_PACKAGE_PATH}"  CACHE STRING "Subdirectory to install Python modules in")
+
+  set(PATH_LIST)
+  if (ERT_ROOT)
+    list(APPEND PATH_LIST ${ERT_ROOT})
+  endif()
+  list(APPEND PATH_LIST ${CMAKE_PREFIX_PATH})
+
+  # Add various popular sibling alternatives.
+  list(APPEND PATH_LIST "${PROJECT_SOURCE_DIR}/../ert/build"
+    "${PROJECT_BINARY_DIR}/../ert-build")
+
+  foreach( PATH ${PATH_LIST})
+    set( python_code "import sys; sys.path.insert(0 , '${PATH}/${PYTHON_INSTALL_PREFIX}'); import os.path; import inspect; import cwrap; print os.path.dirname(os.path.dirname(inspect.getfile(cwrap)))")
+    execute_process( COMMAND ${PYTHON_EXECUTABLE} -c "${python_code}"
+      RESULT_VARIABLE import_result
+      OUTPUT_VARIABLE stdout_output
+      ERROR_VARIABLE stderr_output
+      OUTPUT_STRIP_TRAILING_WHITESPACE )
+
+    if (${import_result} EQUAL 0)
+      set( CWRAP_PYTHON_PATH ${stdout_output} CACHE PATH "Python path for cwrap" )
+      break()
+    endif()
+  endforeach()
+endif()
+find_package_handle_standard_args("Cwrap" DEFAULT_MSG CWRAP_PYTHON_PATH)

cmake/Modules/FindGMP.cmake

@@ -1,31 +0,0 @@
-# - Find the GNU Multiprecision library.
-#
-# Will define the following imported target for usage:
-# - GMP::gmp Target for linking/compiling with C library
-# - GMP::gmpxx Target for linking/compiling with C++ library
-find_path(GMP_INCLUDE_DIR gmp.h)
-find_library(GMP_LIBRARY gmp)
-find_path(GMPXX_INCLUDE_DIR gmpxx.h)
-find_library(GMPXX_LIBRARY gmpxx)
-
-include(FindPackageHandleStandardArgs)
-find_package_handle_standard_args(GMP
-  DEFAULT_MSG
-  GMPXX_LIBRARY GMPXX_INCLUDE_DIR GMP_INCLUDE_DIR GMP_LIBRARY)
-
-if(GMP_FOUND)
-  if(NOT TARGET GMP::gmp)
-    add_library(GMP::gmp UNKNOWN IMPORTED GLOBAL)
-    set_target_properties(GMP::gmp PROPERTIES
-      IMPORTED_LOCATION ${GMP_LIBRARY}
-      INTERFACE_INCLUDE_DIRECTORIES ${GMP_INCLUDE_DIR})
-  endif()
-
-  if(NOT TARGET GMP::gmpxx)
-    add_library(GMP::gmpxx UNKNOWN IMPORTED GLOBAL)
-    set_target_properties(GMP::gmpxx PROPERTIES
-      IMPORTED_LOCATION ${GMPXX_LIBRARY}
-      INTERFACE_INCLUDE_DIRECTORIES ${GMPXX_INCLUDE_DIR}
-      TARGET_LINK_LIBRARIES GMP::gmp)
-  endif()
-endif()

cmake/Modules/FindMETIS.cmake

@@ -8,11 +8,7 @@
 #  HAVE_METIS          - like METIS_FOUND, but for the inclusion in config.h
 #  METIS_INCLUDE_DIRS  - incude paths to use libMETIS
 #  METIS_LIBRARIES     - Link these to use libMETIS
-#  METIS::METIS        - Imported metis target needed for DUNE 2.8.0
-#  METIS_API_VERSION   - The METIS api version scotch is supporting.
 
-set(METIS_API_VERSION 0 CACHE STRING
-  "METIS API version provided by METIS or scotch-metis library")
 set(METIS_SEARCH_PATH "/usr" "/usr/local" "/opt" "/opt/local")
 set(METIS_NO_DEFAULT_PATH "")
 if(METIS_ROOT)
@@ -39,29 +35,9 @@ find_library(METIS_LIBRARIES
   ${METIS_NO_DEFAULT_PATH})
 
 set (METIS_FOUND FALSE)
-
 if (METIS_INCLUDE_DIRS OR METIS_LIBRARIES)
   set(METIS_FOUND TRUE)
   set(HAVE_METIS TRUE)
-  file(READ "${METIS_INCLUDE_DIRS}/metis.h" metisheader)
-  string(REGEX MATCH "#define METIS_VER_MAJOR[ ]+([0-9]+)" METIS_MAJOR_VERSION ${metisheader})
-  if(NOT METIS_API_VERSION AND METIS_MAJOR_VERSION)
-#    string(REGEX REPLACE ".*#define METIS_VER_MAJOR[ ]+([0-9]+).*" "\\1"
-#    METIS_MAJOR_VERSION "${metisheader}")
-    if(METIS_MAJOR_VERSION GREATER_EQUAL 3 AND METIS_MAJOR_VERSION LESS 5)
-      set(METIS_API_VERSION "3")
-    else()
-      set(METIS_API_VERSION "${METIS_MAJOR_VERSION}")
-    endif()
-  endif()
-
-  if (NOT TARGET METIS::METIS)
-    add_library(METIS::METIS UNKNOWN IMPORTED)
-    set_target_properties(METIS::METIS PROPERTIES
-      IMPORTED_LOCATION ${METIS_LIBRARIES}
-      INTERFACE_INCLUDE_DIRECTORIES ${METIS_INCLUDE_DIRS}
-      INTERFACE_COMPILE_DEFINITIONS METIS_API_VERSION=${METIS_API_VERSION})
-  endif()
 endif()
 
 # print a message to indicate status of this package

cmake/Modules/FindPTScotch.cmake

@@ -70,20 +70,6 @@ if(PTSCOTCH_FOUND)
   set(PTSCOCH_LINK_FLAGS "${DUNE_MPI_LINK_FLAGS}"
     CACHE STRING "PT-Scotch link flags")
   set(HAVE_PTSCOTCH 1)
-  if(NOT TARGET PTScotch::Scotch)
-    add_library(PTScotch::Scotch UNKNOWN IMPORTED GLOBAL)
-    set_target_properties(PTScotch::Scotch PROPERTIES
-      IMPORTED_LOCATION "${SCOTCH_LIBRARY}"
-      INCLUDE_DIRECTORIES "${PTSCOTCH_INCLUDE_DIRS}"
-      INTERFACE_LINK_LIBRARIES "${PTSCOTCHERR_LIBRARY}")
-  endif()
-  if(NOT TARGET PTScotch::PTScotch)
-    add_library(PTScotch::PTScotch UNKNOWN IMPORTED GLOBAL)
-    set_target_properties(PTScotch::PTScotch PROPERTIES
-      IMPORTED_LOCATION "${PTSCOTCH_LIBRARY}"
-      INCLUDE_DIRECTORIES "${PTSCOTCH_INCLUDE_DIRS}"
-      INTERFACE_LINK_LIBRARIES "PTScotch::Scotch;${MPI_DUNE_LIBRARIES}")
-  endif()
   # log result
   file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
     "Determing location of PT-Scotch succeded:\n"

cmake/Modules/FindParMETIS.cmake

@@ -60,19 +60,6 @@ set(CMAKE_REQUIRED_FLAGS "${CMAKE_REQUIRED_FLAGS} ${MPI_C_COMPILE_FLAGS}")
 
 include(CheckIncludeFile)
 check_include_file(parmetis.h PARMETIS_FOUND)
-
-if(NOT PARMETIS_FOUND)
-  # If we are using the ParMETIS bindings of PTScotch, we need
-  # to use the scotch include path as partmetis.h includes scotch.h
-  find_package(PTScotch)
-  set(CMAKE_REQUIRED_INCLUDES ${CMAKE_REQUIRED_INCLUDES} ${PTSCOTCH_INCLUDE_DIR})
-    unset(PARMETIS_FOUND CACHE) # force recheck of include file
-    check_include_file(parmetis.h PARMETIS_FOUND)
-    if(PARMETIS_FOUND)
-      set(PARMETIS_SCOTCH_INCLUDE_DIRS ${PTSCOTCH_INCLUDE_DIRS})
-    endif()
-endif()
-
 _search_parmetis_lib(PARMETIS_LIBRARY parmetis "The main ParMETIS library.")
 
 # behave like a CMake module is supposed to behave
@@ -90,7 +77,7 @@ find_package_handle_standard_args(
 cmake_pop_check_state()
 
 if(PARMETIS_FOUND)
-  set(PARMETIS_INCLUDE_DIRS ${PARMETIS_INCLUDE_DIR} ${PARMETIS_SCOTCH_INCLUDE_DIRS})
+  set(PARMETIS_INCLUDE_DIRS ${PARMETIS_INCLUDE_DIR})
   set(PARMETIS_LIBRARIES ${PARMETIS_LIBRARY} ${METIS_LIBRARIES} ${MPI_C_LIBRARIES}
     CACHE FILEPATH "All libraries needed to link programs using ParMETIS")
   set(PARMETIS_LINK_FLAGS "${DUNE_C_LINK_FLAGS}"
@@ -102,13 +89,6 @@ if(PARMETIS_FOUND)
     "Include directory: ${PARMETIS_INCLUDE_DIRS}\n"
     "Library directory: ${PARMETIS_LIBRARIES}\n\n")
 
-  if(NOT TARGET ParMETIS::ParMETIS)
-    add_library(ParMETIS::ParMETIS UNKNOWN IMPORTED GLOBAL)
-    set_target_properties(ParMETIS::ParMETIS PROPERTIES
-      IMPORTED_LOCATION ${PARMETIS_LIBRARY}
-      INCLUDE_DIRECTORIES "${PARMETIS_INCLUDE_DIRS}"
-      INTERFACE_LINK_LIBRARIES "${METIS_LIBRARIES};${MPI_C_LIBRARIES}")
-  endif()
 endif(PARMETIS_FOUND)
 
 mark_as_advanced(PARMETIS_INCLUDE_DIRS PARMETIS_LIBRARIES HAVE_PARMETIS)

cmake/Modules/FindQuadmath.cmake

@@ -34,18 +34,11 @@ int main(void){
   if (QUADMATH_FOUND)
     set(QUADMATH_LIBRARIES "quadmath")
     set(HAVE_QUAD "${QUADMATH_FOUND}")
-    if (NOT TARGET QuadMath::QuadMath)
-      add_library(QuadMath::QuadMath INTERFACE IMPORTED)
-      set_target_properties(QuadMath::QuadMath PROPERTIES
-	INTERFACE_LINK_LIBRARIES quadmath
-	INTERFACE_COMPILE_DEFINITIONS _GLIBCXX_USE_FLOAT128
-	INTERFACE_COMPILE_OPTIONS $<$<CXX_COMPILER_ID:GNU>:-fext-numeric-literals>)
-    endif()
   endif()
 endif()
 
 if (USE_QUADMATH AND NOT QUADMATH_FOUND)
-  message(STATUS "Quadruple precision math support is unavailable! Skipping it.")
+  message(FATAL_ERROR "Quadruple precision math support was explicitly requested but is unavailable!")
 endif()
 
 include(FindPackageHandleStandardArgs)

cmake/Modules/FindSuiteSparse.cmake

@@ -259,9 +259,9 @@ foreach (module IN LISTS SuiteSparse_FIND_COMPONENTS)
 	set (SuiteSparse_FOUND FALSE)
 	# use empty string instead of zero, so it can be tested with #ifdef
 	# as well as #if in the source code
-    set (HAVE_SUITESPARSE_${MODULE}_H "" CACHE STRING "Is ${module} header present?")
+	set (HAVE_SUITESPARSE_${MODULE}_H "" CACHE INT "Is ${module} header present?")
   else (NOT SuiteSparse_${MODULE}_FOUND)
-    set (HAVE_SUITESPARSE_${MODULE}_H 1 CACHE STRING "Is ${module} header present?")
+	set (HAVE_SUITESPARSE_${MODULE}_H 1 CACHE INT "Is ${module} header present?")
 	list (APPEND SuiteSparse_LIBRARIES "${${MODULE}_LIBRARIES}")
 	list (APPEND SuiteSparse_LINKER_FLAGS "${${MODULE}_LINKER_FLAGS}")
 	list (APPEND SuiteSparse_INCLUDE_DIRS "${${MODULE}_INCLUDE_DIRS}")
@@ -280,32 +280,6 @@ if (SuiteSparse_LIBRARIES)
   list (REVERSE SuiteSparse_LIBRARIES)
 endif (SuiteSparse_LIBRARIES)
 
-if(SuiteSparse_FOUND)
-  if(NOT TARGET SuiteSparse::SuiteSparse)
-    add_library(SuiteSparse::SuiteSparse INTERFACE IMPORTED GLOBAL)
-    set_property(TARGET SuiteSparse::SuiteSparse PROPERTY
-      INTERFACE_INCLUDE_DIRECTORIES ${SuiteSparse_INCLUDE_DIRS})
-    if(config_LIBRARY)
-      set_property(TARGET SuiteSparse::SuiteSparse PROPERTY
-	INTERFACE_LINK_LIBRARIES ${config_LIBRARY})
-    endif()
-  endif()
-  foreach(_module ${SuiteSparse_MODULES})
-    string (TOUPPER ${_module} _MODULE)
-    if(SuiteSparse_${_MODULE}_FOUND)
-      if(NOT TARGET SuiteSparse::${_module})
-	message(STATUS "Creating target SuitSparse::${_module}")
-	add_library(SuiteSparse::${_module} UNKNOWN IMPORTED GLOBAL)
-	set_target_properties(SuiteSparse::${_module} PROPERTIES
-	  IMPORTED_LOCATION ${${_MODULE}_LIBRARY}
-	  INCLUDE_DIRECTORIES ${${_MODULE}_INCLUDE_DIRS}
-	  INTERFACE_LINK_LIBRARIES "${config_LIBRARY}")
-	target_link_libraries(SuiteSparse::SuiteSparse
-          INTERFACE SuiteSparse::${_module})
-      endif()
-    endif()
-  endforeach(_module)
-endif()
 # print a message to indicate status of this package
 include (FindPackageHandleStandardArgs)
 find_package_handle_standard_args (SuiteSparse

cmake/Modules/FindSuperLU.cmake

@@ -180,16 +180,6 @@ if(SUPERLU_FOUND)
   if (SUPERLU_BLAS_LIBRARY)
     list(APPEND SUPERLU_LIBRARIES ${SUPERLU_BLAS_LIBRARY})
   endif()
-  if(NOT TARGET SuperLU::SuperLU)
-    add_library(SuperLU::SuperLU UNKNOWN IMPORTED GLOBAL)
-    set_target_properties(SuperLU::SuperLU PROPERTIES
-      IMPORTED_LOCATION ${SUPERLU_LIBRARY}
-      INCLUDE_DIRECTORIES ${SUPERLU_INCLUDE_DIRS})
-    if(SUPERLU_BLAS_LIBRARY)
-      set_property(TARGET SuperLU::SuperLU PROPERTY
-	INTERFACE_LINK_LIBRARIES ${SUPERLU_BLAS_LIBRARY})
-    endif()
-  endif()
 endif()
 
 cmake_pop_check_state()

cmake/Modules/FindTBB.cmake

@@ -1,34 +0,0 @@
-# Poor man's FindTBB that will create the CMake targets
-# used by DUNE.
-# If the TBB version is new enough it will ship its own
-# TBBConfig.cmake and we are good
-find_package(TBB QUIET CONFIG)
-
-if(NOT TBB_FOUND)
-  # Fall back to using pkgconfig
-  find_package(PkgConfig QUIET)
-  if (PKG_CONFIG_FOUND)
-    pkg_check_modules(PkgConfigTBB IMPORTED_TARGET GLOBAL tbb QUIET)
-    if(NOT TARGET PkgConfig::PkgConfigTBB)
-      # workaround bug in old FindPkgConfig.cmake which adds
-      # pkgcfg_lib_PkgConfigTBB_atomic-NOTFOUND  because it cannot
-      # find the atomic lib of the compiler (not in platforms default
-      # library path. It will therefore not create the target and we
-      # try that manually.
-      string(REPLACE ";pkgcfg_lib_PkgConfigTBB_atomic-NOTFOUND" "" _find_tbb_libs "${PkgConfigTBB_LINK_LIBRARIES}")
-      if(_find_tbb_libs)
-	add_library(PkgConfig::PkgConfigTBB INTERFACE IMPORTED GLOBAL)
-	set_property(TARGET PkgConfig::PkgConfigTBB PROPERTY
-	  INTERFACE_LINK_LIBRARIES "${_find_tbb_libs}")
-      endif()
-    endif()
-    if(TARGET PkgConfig::PkgConfigTBB)
-      if(NOT TARGET TBB::tbb)
-	message(STATUS "Found TBB library using pkg config")
-	add_library(TBB::tbb ALIAS PkgConfig::PkgConfigTBB)
-      endif()
-    endif()
-  endif(PKG_CONFIG_FOUND)
-else()
-  message(STATUS "Found TBB library using config mode")
-endif(NOT TBB_FOUND)

cmake/Modules/FindValgrind.cmake

@@ -3,10 +3,13 @@
 # This module defines:
 #  VALGRIND_INCLUDE_DIR, where to find valgrind/memcheck.h, etc.
 #  VALGRIND_PROGRAM, the valgrind executable.
-#  Valgrind_FOUND, If false, do not try to use valgrind.
+#  VALGRIND_FOUND, If false, do not try to use valgrind.
 #
 # If you have valgrind installed in a non-standard place, you can define
 # VALGRIND_ROOT to tell cmake where it is.
+if (VALGRIND_FOUND)
+  return()
+endif()
 
 find_path(VALGRIND_INCLUDE_DIR valgrind/memcheck.h
   /usr/include /usr/local/include ${VALGRIND_ROOT}/include)
@@ -15,7 +18,7 @@ find_path(VALGRIND_INCLUDE_DIR valgrind/memcheck.h
 # path, but this does not hurt...
 find_program(VALGRIND_PROGRAM NAMES valgrind PATH ${VALGRIND_ROOT}/bin)
 
-find_package_handle_standard_args(Valgrind DEFAULT_MSG
+find_package_handle_standard_args(VALGRIND DEFAULT_MSG
   VALGRIND_INCLUDE_DIR
   VALGRIND_PROGRAM)
 

cmake/Modules/FindZOLTAN.cmake

@@ -24,7 +24,7 @@ find_package(PTScotch)
 #find_package(ParMETIS)
 
 # search for files which implements this module
-find_path (ZOLTAN_INCLUDE_DIR
+find_path (ZOLTAN_INCLUDE_DIRS
   NAMES "zoltan.h"
   PATHS ${ZOLTAN_SEARCH_PATH}
   PATH_SUFFIXES include trilinos
@@ -35,7 +35,7 @@ if (CMAKE_SIZEOF_VOID_P)
   math (EXPR _BITS "8 * ${CMAKE_SIZEOF_VOID_P}")
 endif (CMAKE_SIZEOF_VOID_P)
 
-find_library(ZOLTAN_LIBRARY
+find_library(ZOLTAN_LIBRARIES
   NAMES zoltan trilinos_zoltan
   PATHS ${ZOLTAN_SEARCH_PATH}
   PATH_SUFFIXES "lib/.libs" "lib" "lib${_BITS}" "lib/${CMAKE_LIBRARY_ARCHITECTURE}"
@@ -50,20 +50,15 @@ include (FindPackageHandleStandardArgs)
 
 find_package_handle_standard_args(ZOLTAN
   DEFAULT_MSG
-  ZOLTAN_LIBRARY
-  ZOLTAN_INCLUDE_DIR
+  ZOLTAN_LIBRARIES
+  ZOLTAN_INCLUDE_DIRS
   MPI_FOUND
   )
 
 if (ZOLTAN_FOUND)
   set(HAVE_ZOLTAN 1)
-  set(ZOLTAN_LIBRARIES ${ZOLTAN_LIBRARY} ${PARMETIS_LIBRARIES} ${PTSCOTCH_LIBRARIES})
-  set(ZOLTAN_INCLUDE_DIRS ${ZOLTAN_INCLUDE_DIR} ${PARMETIS_INCLUDE_DIRS}
+  set(ZOLTAN_LIBRARIES ${ZOLTAN_LIBRARIES} ${PARMETIS_LIBRARIES} ${PTSCOTCH_LIBRARIES})
+  set(ZOLTAN_INCLUDE_DIRS ${ZOLTAN_INCLUDE_DIRS} ${PARMETIS_INCLUDE_DIRS}
       ${PTSCOTCH_INCLUDE_DIRS})
-  # log result
-  file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
-    "Determing location of ZOLTAN succeeded:\n"
-    "  Include directory: ${ZOLTAN_INCLUDE_DIRS}\n"
-    "  Library directory: ${ZOLTAN_LIBRARIES}\n\n")
 endif()
 

cmake/Modules/Findcjson.cmake

@@ -6,6 +6,10 @@
 
 include (FindPackageHandleStandardArgs)
 
+if ((NOT CJSON_ROOT) AND OPM_PARSER_ROOT)
+  set( CJSON_ROOT ${OPM_PARSER_ROOT}) 
+endif()
+
 if (CJSON_ROOT)
   set (_no_default_path "NO_DEFAULT_PATH")
 else (CJSON_ROOT)
@@ -14,9 +18,10 @@ endif (CJSON_ROOT)
 
 
 find_path (CJSON_INCLUDE_DIR
-  NAMES "cJSON.h"
+  NAMES "cjson/cJSON.h"
   HINTS "${CJSON_ROOT}"
-  PATH_SUFFIXES "cjson"
+  PATHS "${PROJECT_SOURCE_DIR}"
+  PATH_SUFFIXES "include" "external"
   DOC "Path to cjson library header files"
   ${_no_default_path} )
 
@@ -31,13 +36,17 @@ string(REGEX REPLACE "${PROJECT_SOURCE_DIR}/?(.*)" "\\1"  BUILD_DIR_SUFFIX "${PR
 find_library (CJSON_LIBRARY
   NAMES "cjson"
   HINTS "${CJSON_ROOT}"
+  PATHS "${PROJECT_BINARY_DIR}/../opm-parser"
+        "${PROJECT_BINARY_DIR}/../opm-parser${BUILD_DIR_SUFFIX}"
+        "${PROJECT_BINARY_DIR}/../../opm-parser/${BUILD_DIR_SUFFIX}"
   PATH_SUFFIXES "lib" "lib${_BITS}" "lib/${CMAKE_LIBRARY_ARCHITECTURE}"
+                "opm/json"
   DOC "Path to cjson library archive/shared object files"
   ${_no_default_path} )
 
 # setup list of all required libraries to link with cjson
-set (cjson_INCLUDE_DIRS ${CJSON_INCLUDE_DIR})
-set (cjson_LIBRARIES ${CJSON_LIBRARY})
+set (CJSON_INCLUDE_DIRS ${CJSON_INCLUDE_DIR})
+set (CJSON_LIBRARIES ${CJSON_LIBRARY})
 
 # math library (should exist on all unices; automatically linked on Windows)
 if (UNIX)
@@ -72,7 +81,10 @@ endif ()
 
 # if the test program didn't compile, but was required to do so, bail
 # out now and display an error; otherwise limp on
-find_package_handle_standard_args (cjson
+set (CJSON_FIND_REQUIRED ${cjson_FIND_REQUIRED})
+set (CJSON_FIND_QUIETLY ${cjson_FIND_QUIETLY})
+find_package_handle_standard_args (CJSON
   DEFAULT_MSG
-  cjson_INCLUDE_DIRS cjson_LIBRARIES HAVE_CJSON
+  CJSON_INCLUDE_DIRS CJSON_LIBRARIES HAVE_CJSON
   )
+set (cjson_FOUND ${CJSON_FOUND})

cmake/Modules/Finddune-common.cmake

@@ -19,9 +19,7 @@ find_opm_package (
   "BLAS REQUIRED;
   LAPACK REQUIRED;
   CxaDemangle;
-  MPI;
-  TBB;
-  GMP
+  MPI
   "
   # header to search for
   "dune/common/fvector.hh"
@@ -30,7 +28,7 @@ find_opm_package (
   "dunecommon"
 
   # defines to be added to compilations
-  ""
+  "DUNE_COMMON_FIELDVECTOR_SIZE_IS_METHOD=1"
 
   # test program
 "#include <dune/common/fvector.hh>

cmake/Modules/Finddune-fem.cmake

@@ -24,8 +24,7 @@ find_opm_package (
    dune-alugrid;
    ZLIB;
    ZOLTAN;
-   METIS;
-   Quadmath
+   METIS
   "
   # header to search for
   "dune/fem/space/shapefunctionset/legendre.hh"

cmake/Modules/Finddune-geometry.cmake

@@ -33,7 +33,8 @@ find_opm_package (
   # test program
 "#include <dune/geometry/quadraturerules.hh>
 int main (void) {
-  Dune::GeometryType gt = Dune::GeometryTypes::quadrilateral;
+  Dune::GeometryType gt;
+  gt.makeQuadrilateral();
   Dune::QuadratureRules<double, 2>::rule(gt, 2).size();
   return 0;
 }

cmake/Modules/Finddune-istl.cmake

@@ -19,7 +19,7 @@ find_opm_package (
   "dune-common REQUIRED;
   ParMETIS;
   SuperLU;
-  SuiteSparse COMPONENTS umfpack REQUIRED
+  SuiteSparse COMPONENTS umfpack
   "
   # header to search for
   "dune/istl/bcrsmatrix.hh"

cmake/Modules/LibtoolArchives.cmake

@@ -16,36 +16,7 @@ function (linker_cmdline what INTO outvar FROM)
   # (you get an error message about argument not parsed). translate each
   # of the libraries into a linker option
   set (deplib_list "")
-  set (deplib_list_tmp "")
   foreach (deplib IN LISTS ARGN)
-    # resolve imported targets
-    string(FIND ${deplib} "::" _sep)
-    if (_sep GREATER "-1")
-      set(_lib "")
-      # the code below does not really work for imported interface library
-      # as cmake will error out whene querying IMPORTED_LOCATION, because the
-      # property is not whitelisted. I have no idea how to determine if
-      # a library is an imported interface library
-      # At least it works for resolving OpenMP::OpenMP_CXX
-      #
-      # get_property(_def TARGET ${deplib} PROPERTY IMPORTED_LOCATION DEFINED)
-      # if (_def)
-      #   get_property(_def TARGET ${deplib} PROPERTY IMPORTED_LOCATION SET)
-      #   if (_def)
-      #     get_target_property(_tmp_lib ${deplib} IMPORTED_LOCATION)
-      #    list(APPEND _lib ${_tmp_lib})
-      #   endif()
-      # endif()
-      get_property(_def TARGET ${deplib} PROPERTY INTERFACE_LINK_LIBRARIES SET)
-      if (_def)
-	get_target_property(_tmp_lib ${deplib} INTERFACE_LINK_LIBRARIES)
-	list(APPEND _lib ${_tmp_lib})
-      endif()
-      set(deplib ${_lib})
-    endif()
-    list(APPEND deplib_list_tmp ${deplib})
-  endforeach()
-  foreach (deplib IN LISTS deplib_list_tmp)
 	# starts with a hyphen already? then just add it
 	string (SUBSTRING ${deplib} 0 1 dash)
 	if (${dash} STREQUAL "-")
@@ -73,20 +44,18 @@ function (linker_cmdline what INTO outvar FROM)
 	  # is more or less lost. remove system default path, to lessen the
 	  # chance that we pick the wrong library
 	  if (NOT ((deplib_dir STREQUAL "/usr/lib") OR
-                (deplib_dir STREQUAL "") OR
-		(deplib_dir STREQUAL "/usr/${CMAKE_INSTALL_LIBDIR}")))
-	    list (APPEND deplib_list "-L${deplib_dir}")
-	  endif ()
+			   (deplib_dir STREQUAL "/usr/${CMAKE_INSTALL_LIBDIR}")))
+		   list (APPEND deplib_list "-L${deplib_dir}")
+	  endif (NOT ((deplib_dir STREQUAL "/usr/lib") OR
+			      (deplib_dir STREQUAL "/usr/${CMAKE_INSTALL_LIBDIR}")))
 	  # if there was no translation of the name, the library is named
 	  # unconventionally (.so.3gf, I'm looking at you), so pass this
 	  # name unmodified to the linker switch
-	  if (deplib_orig STREQUAL deplib_name AND
-	      NOT deplib_orig STREQUAL "stdc++fs")
+	  if (deplib_orig STREQUAL deplib_name)
 		list (APPEND deplib_list "-l:${deplib_orig}")
-	  else ()
+	  else (deplib_orig STREQUAL deplib_name)
 		list (APPEND deplib_list "-l${deplib_name}")
-	  endif (deplib_orig STREQUAL deplib_name AND
-	    NOT deplib_orig STREQUAL "stdc++fs")
+	  endif (deplib_orig STREQUAL deplib_name)
 	endif (${dash} STREQUAL "-")
   endforeach (deplib)
   # caller determines whether we want it returned as a list or a string

cmake/Modules/OpmBashCompletion.cmake

@@ -1,16 +1,6 @@
 # Installs bash tab completion for a product
 macro(opm_add_bash_completion binary)
-  option(USE_BASH_COMPLETIONS_DIR
-    "Whether to use the new bash completion dir (/usr/share/bash-completion/completions) with load on demand"
-    OFF)
-  if(USE_BASH_COMPLETIONS_DIR)
-    set(_BASH_COMPLETION_FILE ${binary})
-    set(_BASH_COMPLETION_INSTALL_DIR ${CMAKE_INSTALL_DATAROOTDIR}/bash-completion/completions)
-  else()
-    set(_BASH_COMPLETION_FILE ${binary}_bash_completion.sh)
-    set(_BASH_COMPLETION_INSTALL_DIR ${CMAKE_INSTALL_SYSCONFDIR}/bash_completion.d)
-  endif()
   set(PRODUCT ${binary})
-  configure_file(${OPM_MACROS_ROOT}/etc/opm_bash_completion.sh.in ${_BASH_COMPLETION_FILE} @ONLY)
-  install(FILES ${PROJECT_BINARY_DIR}/${_BASH_COMPLETION_FILE} DESTINATION ${_BASH_COMPLETION_INSTALL_DIR})
+  configure_file(${OPM_MACROS_ROOT}/etc/opm_bash_completion.sh.in ${binary}_bash_completion.sh @ONLY)
+  install(FILES ${PROJECT_BINARY_DIR}/${binary}_bash_completion.sh DESTINATION ${CMAKE_INSTALL_SYSCONFDIR}/bash_completion.d)
 endmacro()

cmake/Modules/OpmCompile.cmake

@@ -29,18 +29,12 @@ macro (opm_compile opm)
 
   # create this library, if there are any compilation units
   link_directories (${${opm}_LIBRARY_DIRS})
-  if(CMAKE_VERSION VERSION_GREATER_EQUAL "3.12")
-    # Some modules may still export definitions using -D, strip it
-    string(REGEX REPLACE "-D" "" _clean_defs "${${opm}_DEFINITIONS}")
-    add_compile_definitions(${_clean_defs})
-  else()
-    add_definitions(${${opm}_DEFINITIONS})
-  endif()
+  add_definitions (${${opm}_DEFINITIONS})
   set (${opm}_VERSION "${${opm}_VERSION_MAJOR}.${${opm}_VERSION_MINOR}")
   if (${opm}_SOURCES)
-        add_library (${${opm}_TARGET} ${${opm}_LIBRARY_TYPE} ${${opm}_SOURCES} ${${opm}_HEADERS})
+        add_library (${${opm}_TARGET} ${${opm}_LIBRARY_TYPE} ${${opm}_SOURCES})
         set_target_properties (${${opm}_TARGET} PROPERTIES
-          SOVERSION ${${opm}_VERSION}
+          SOVERSION ${${opm}_VERSION_MAJOR}
           VERSION ${${opm}_VERSION}
           LINK_FLAGS "${${opm}_LINKER_FLAGS_STR}"
           POSITION_INDEPENDENT_CODE TRUE 

cmake/Modules/OpmFind.cmake

@@ -106,13 +106,8 @@ macro (find_and_append_package_to prefix name)
 
   # if we're told not to look for the package, pretend it was never found
   if (CMAKE_DISABLE_FIND_PACKAGE_${name})
-    # If required send an error
-    cmake_parse_arguments(FIND "REQUIRED" "" "" ${ARGN} )
-    set (${name}_FOUND FALSE)
-    set (${NAME}_FOUND FALSE)
-    if (FIND_REQUIRED)
-        message(SEND_ERROR "package ${name} but disable with CMAKE_DISABLE_FIND_PACKAGE_${name}")
-    endif ()
+	set (${name}_FOUND FALSE)
+	set (${NAME}_FOUND FALSE)
   else ()
     # List of components might differ for every module. Therefore we will
     # need to research for a library multiple times. _search_components
@@ -128,41 +123,26 @@ macro (find_and_append_package_to prefix name)
     # We even need to repeat the search for opm-common once as this is done
     # in the top most CMakeLists.txt without querying defines, setting dependencies
     # and the likes which is only done via opm_find_package
-    string(REGEX MATCH "(opm)-.*" _is_opm ${name})
-    if(NOT _is_opm)
-      # When using Boost >= 1.70 and e.g. CMake 3.18 we need to make sure that
-      # subsequent searches are using config mode too. Otherwise the library
-      # list will be completely messed up. We use a set Boost_Dir to detect that
-      # previous searches were done using config mode.
-      if("${name}" STREQUAL "Boost" AND Boost_DIR)
-        set(_CONFIG_MODE CONFIG)
+    if ( (NOT DEFINED ${name}_FOUND AND NOT DEFINED ${NAME}_FOUND )
+         OR _search_components GREATER -1)
+       string(REGEX MATCH "(opm)-.*" _is_opm ${name})
+      if(NOT _is_opm)
+        find_package (${name} ${ARGN})
       else()
-        set(_CONFIG_MODE "")
-      endif()
-      find_package (${name} ${ARGN} ${_CONFIG_MODE})
-    else()
-      if(${name}_DIR)
-        find_package (${name} ${${prefix}_VERSION_MAJOR}.${${prefix}_VERSION_MINOR} ${ARGN} NO_MODULE PATHS ${${name}_DIR} NO_DEFAULT_PATH)
-      else()
-        find_package (${name} ${${prefix}_VERSION_MAJOR}.${${prefix}_VERSION_MINOR} ${ARGN} NO_MODULE)
-      endif()
-      include(FindPackageHandleStandardArgs)
-      if( CMAKE_VERSION VERSION_GREATER_EQUAL "3.17")
-	# For some reason we will e.g. call
-	# find_package_handle_standard_args(opm-common)
-	# in a find_package(opm-material) call and this will
-	# usuallly print an annoying warnig. Prevent this at least
-	# for cmake >=3.17
-	# \todo Check why/whether these calls are even needed.
-	set(_NAME_MISMATCHED "NAME_MISMATCHED")
-      endif()
-      if(${name}_FOUND AND ${name}_LIBRARY STREQUAL "")
-        find_package_handle_standard_args(${name}
-          REQUIRED_VARS ${name}_INCLUDE_DIRS ${_NAME_MISMATCHED})
-      else()
-        find_package_handle_standard_args(${name}
-          REQUIRED_VARS ${name}_LIBRARY ${_NAME_MISMATCHED})
-      endif()
+        if(${name}_DIR)
+          find_package (${name} ${${prefix}_VERSION_MAJOR}.${${prefix}_VERSION_MINOR} ${ARGN} NO_MODULE PATHS ${${name}_DIR} NO_DEFAULT_PATH)
+        else()
+          find_package (${name} ${${prefix}_VERSION_MAJOR}.${${prefix}_VERSION_MINOR} ${ARGN} NO_MODULE)
+        endif()
+        include(FindPackageHandleStandardArgs)
+        if(${name}_FOUND AND ${name}_LIBRARY STREQUAL "")
+          find_package_handle_standard_args(${name}
+                                            REQUIRED_VARS ${name}_INCLUDE_DIRS)
+        else()
+          find_package_handle_standard_args(${name}
+                                            REQUIRED_VARS ${name}_LIBRARY)
+        endif()
+      endif ()
     endif ()
     if (NOT DEFINED ${name}_FOUND)
       set (${name}_FOUND "${${NAME}_FOUND}")
@@ -178,21 +158,7 @@ macro (find_and_append_package_to prefix name)
   string (REPLACE "-" "_" NAME "${NAME}")
 
   if (${name}_FOUND OR ${NAME}_FOUND)
-      foreach (var IN LISTS _opm_proj_vars)
-          if("${var}" STREQUAL "DEFINITIONS"
-            AND CMAKE_VERSION VERSION_LESS "3.12")
-            # For old Cmake versions we use add_definitions which
-            # requires -D qualifier add that
-            set(_defs)
-            foreach(_def IN LISTS ${name}_${var})
-              if(_def MATCHES "^[a-zA-Z].*")
-                list(APPEND _defs "-D${_def}")
-              else()
-                list(APPEND _defs "${_def}")
-              endif()
-            endforeach()
-            set(${name}_${var} "${_defs}")
-          endif()
+	foreach (var IN LISTS _opm_proj_vars)
 	  if (DEFINED ${name}_${var})
 		list (APPEND ${prefix}_${var} ${${name}_${var}})
 	  # some packages define an uppercase version of their own name

cmake/Modules/OpmInit.cmake

@@ -130,26 +130,14 @@ endif ()
 
 # parallel computing must be explicitly enabled
 # This needs to be in OpmInit as prereqs is called before OpmLibMain is included.
-option (USE_MPI "Use Message Passing Interface for parallel computing" ON)
+option (USE_MPI "Use Message Passing Interface for parallel computing" OFF)
 if (NOT USE_MPI)
   set (CMAKE_DISABLE_FIND_PACKAGE_MPI TRUE)
 endif ()
 
-# Compiler standard version needs to be requested here as prereqs is included
-# before OpmLibMain and some tests need/use CXX_STANDARD_VERSION (e.g. pybind11)
-# Languages and global compiler settings
-set(CMAKE_CXX_STANDARD 17)
-set(CMAKE_CXX_STANDARD_REQUIRED ON)
-set(CMAKE_CXX_EXTENSIONS OFF)
-
 # quadmath must be explicitly enabled
 # This needs to be in OpmInit as prereqs is called before OpmLibMain is included.
-option (USE_QUADMATH "Search for high precision floating point library (normally not used)" ON)
+option (USE_QUADMATH "Use high precision floating point library (slow)" OFF)
 if (NOT USE_QUADMATH)
   set (CMAKE_DISABLE_FIND_PACKAGE_QuadMath TRUE)
 endif ()
-
-option (USE_SUPERLU "Use SuperLU direct solvers for AMG (if umfpack is not found)" ON)
-if (NOT USE_SUPERLU)
-  set (CMAKE_DISABLE_FIND_PACKAGE_SuperLU TRUE)
-endif ()

cmake/Modules/OpmLibMain.cmake

@@ -20,6 +20,16 @@
 include (AddOptions)
 no_default_options ()
 
+# Languages and global compiler settings
+if(CMAKE_VERSION VERSION_LESS 3.8)
+  message(WARNING "CMake version does not support c++17, guessing -std=c++17")
+  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++17")
+else()
+  set(CMAKE_CXX_STANDARD 17)
+  set(CMAKE_CXX_STANDARD_REQUIRED ON)
+  set(CMAKE_CXX_EXTENSIONS OFF)
+endif()
+
 # Various compiler extension checks
 include(OpmCompilerChecks)
 
@@ -52,10 +62,7 @@ include (UseOptimization)
 
 # turn on all warnings; this must be done before adding any
 # dependencies, in case they alter the list of warnings
-option(OPM_DISABLE_WARNINGS "Disable warning flags" OFF)
-if(NOT OPM_DISABLE_WARNINGS)
-  include (UseWarnings)
-endif()
+include (UseWarnings)
 
 # parallel programming
 include (UseOpenMP)
@@ -63,6 +70,9 @@ find_openmp (${project})
 include (UseThreads)
 find_threads (${project})
 
+# SuperLU is optional
+option (USE_SUPERLU "Use SuperLU direct solvers" OFF)
+
 # PETSc is optional
 option (USE_PETSC "Use PETSc iterative solvers" OFF)
 

cmake/Modules/OpmPackage.cmake

@@ -95,19 +95,10 @@ macro (find_opm_package module deps header lib defs prog conf)
 
   # compile with this option to avoid avalanche of warnings
   set (${module}_DEFINITIONS "${${module}_DEFINITIONS}")
-  # -D to compile definitions for older CMake versions
-  set (_D_PREFIX "")
-  if(CMAKE_VERSION VERSION_LESS "3.12")
-    set(_D_PREFIX "-D")
-  endif()
   foreach (_def IN ITEMS ${defs})
-    if(_def MATCHES "^[A-Za-z].*")
-      list (APPEND ${module}_DEFINITIONS "${_D_PREFIX}${_def}")
-    endif()
+	list (APPEND ${module}_DEFINITIONS "-D${_def}")
   endforeach (_def)
 
-  list (APPEND ${module}_DEFINITIONS ${defs})
-
   # tidy the lists before returning them
   remove_dup_deps (${module})
 
@@ -124,37 +115,26 @@ macro (find_opm_package module deps header lib defs prog conf)
   # without config.h
   config_cmd_line (${module}_CMD_CONFIG ${module}_CONFIG_VARS)
 
-  if(prog) # always evaluates to false, but makes tests with DUNE 2.6-2.7 work
-    # check that we can compile a small test-program
-    include (CMakePushCheckState)
-    cmake_push_check_state ()
-    include (CheckCXXSourceCompiles)
-    # only add these if they are actually found; otherwise it won't
-    # compile and the variable won't be set
-    append_found (${module}_INCLUDE_DIRS CMAKE_REQUIRED_INCLUDES)
-    append_found (${module}_LIBRARIES CMAKE_REQUIRED_LIBRARIES)
-    # since we don't have any config.h yet
-    list (APPEND CMAKE_REQUIRED_DEFINITIONS ${${module}_DEFINITIONS})
-    list (APPEND CMAKE_REQUIRED_DEFINITIONS ${${module}_CMD_CONFIG})
-    check_cxx_source_compiles ("${prog}" HAVE_${MODULE})
-    cmake_pop_check_state ()
-  else()
-    if(${module}_FOUND)
-      # No test code provided, mark compilation as successful
-      # if module was found
-      # Has to be cached because of scope. Otherwise it is not accessible
-      # where it is used.
-      set(HAVE_${MODULE} 1 CACHE BOOL "${module} found")
-      mark_as_advanced(HAVE_${MODULE})
-    endif(${module}_FOUND)
-  endif()
+  # check that we can compile a small test-program
+  include (CMakePushCheckState)
+  cmake_push_check_state ()
+  include (CheckCXXSourceCompiles)
+  # only add these if they are actually found; otherwise it won't
+  # compile and the variable won't be set
+  append_found (${module}_INCLUDE_DIRS CMAKE_REQUIRED_INCLUDES)
+  append_found (${module}_LIBRARIES CMAKE_REQUIRED_LIBRARIES)
+  # since we don't have any config.h yet
+  list (APPEND CMAKE_REQUIRED_DEFINITIONS ${${module}_DEFINITIONS})
+  list (APPEND CMAKE_REQUIRED_DEFINITIONS ${${module}_CMD_CONFIG})
+  check_cxx_source_compiles ("${prog}" HAVE_${MODULE})
+  cmake_pop_check_state ()
 
   # write status message in the same manner as everyone else
   include (FindPackageHandleStandardArgs)
   find_package_handle_standard_args (
         ${module}
         DEFAULT_MSG
-        ${module}_INCLUDE_DIRS ${module}_LIBRARIES ${module}_FOUND ${module}_ALL_PREREQS HAVE_${MODULE}
+        ${module}_INCLUDE_DIRS ${module}_LIBRARIES ${module}_FOUND ${module}_ALL_PREREQS
         )
 
   # some genius that coded the FindPackageHandleStandardArgs figured out

cmake/Modules/OpmProject.cmake

@@ -30,6 +30,7 @@ function (configure_pc_file name source dest prefix libdir includedir)
   set (minor "${${name}_VERSION_MINOR}")
   set (target "${${name}_LIBRARY}")
   linker_cmdline (STRING INTO target from ${target})
+
   configure_file (${source} ${dest} @ONLY)
 endfunction (configure_pc_file name source dist prefix libdir includedir)
 
@@ -54,12 +55,6 @@ function (configure_cmake_file name variant version)
   foreach (suffix IN LISTS variable_suffices)
 	set (opm-project_${suffix} "${${name}_${suffix}}")
   endforeach (suffix)
-
-  if (BUILD_SHARED_LIBS)
-    # No need to list shared libraries as the linker information is alread
-    # in the shared lib
-    string(REGEX REPLACE ";?[^;]*.so" "" opm-project_LIBRARIES "${opm-project_LIBRARIES}")
-  endif()
   set (opm-project_NAME "${${name}_NAME}")
   set (opm-project_NAME_UC "${${name}_NAME}")
   string(TOUPPER "${opm-project_NAME}" opm-project_NAME_UC)
@@ -106,24 +101,16 @@ function (opm_cmake_config name)
   # and we have existing entries pointing to that install directory.
   # Since they will yield a duplicate in next replace anyways, we filter them out first
   # to get avoid those the bogus entries.
-  # First with trailing / to change /usr/include/package to package and not /package
-  # Fixes broken pkg-config files for Debian/Ubuntu packaging.
-  string(FIND "${${name}_INCLUDE_DIRS}" "${PROJECT_SOURCE_DIR}" _source_in_include)
+  string(REPLACE "${CMAKE_INSTALL_PREFIX}/include${${name}_VER_DIR}" "" ${name}_INCLUDE_DIRS "${${name}_INCLUDE_DIRS}")
 
-  if(_source_in_include GREATER "-1")
-    string(REGEX REPLACE "${CMAKE_INSTALL_PREFIX}/include${${name}_VER_DIR}[;$]" "" ${name}_INCLUDE_DIRS "${${name}_INCLUDE_DIRS}")
-    # Get rid of empty entries
-    string(REPLACE ";;" ";" ${name}_INCLUDE_DIRS "${${name}_INCLUDE_DIRS}")
-
-    # replace the build directory with the target directory in the
-    # variables that contains build paths
-    string (REPLACE
-      "${PROJECT_SOURCE_DIR}"
-      "${CMAKE_INSTALL_PREFIX}/include${${name}_VER_DIR}"
-      ${name}_INCLUDE_DIRS
-      "${${name}_INCLUDE_DIRS}"
-      )
-  endif()
+  # replace the build directory with the target directory in the
+  # variables that contains build paths
+  string (REPLACE
+	"${PROJECT_SOURCE_DIR}"
+	"${CMAKE_INSTALL_PREFIX}/include${${name}_VER_DIR}"
+	${name}_INCLUDE_DIRS
+	"${${name}_INCLUDE_DIRS}"
+	)
   string (REPLACE
 	"${CMAKE_LIBRARY_OUTPUT_DIRECTORY}"
 	"${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_LIBDIR}${${name}_VER_DIR}"

cmake/Modules/OpmSatellites.cmake

@@ -338,7 +338,7 @@ macro(opm_add_test TestName)
       # has been specified to supervise the test binary, use it else
       # run the test binary "naked".
       if (CURTEST_DRIVER)
-        set(CURTEST_COMMAND ${CURTEST_DRIVER} ${CURTEST_DRIVER_ARGS} -e ${CURTEST_EXE_NAME} -- ${CURTEST_TEST_ARGS})
+        set(CURTEST_COMMAND ${CURTEST_DRIVER} ${CURTEST_DRIVER_ARGS} ${CURTEST_EXE_NAME} ${CURTEST_TEST_ARGS})
       else()
         set(CURTEST_COMMAND ${PROJECT_BINARY_DIR}/bin/${CURTEST_EXE_NAME})
         if (CURTEST_TEST_ARGS)

cmake/Modules/PyInstallPrefix.cmake

@@ -1,28 +0,0 @@
-# We make this a cmake module so it can be used from opm-simulators' CMakeLists.txt also
-execute_process(COMMAND ${PYTHON_EXECUTABLE} -c "
-import site, sys
-try:
-    sys.stdout.write(site.getsitepackages()[-1])
-except e:
-    sys.stdout.write('')" OUTPUT_VARIABLE PYTHON_SITE_PACKAGES_PATH)
-  # -------------------------------------------------------------------------
-  # 1: Wrap C++ functionality in Python
-if (PYTHON_SITE_PACKAGES_PATH MATCHES ".*/dist-packages/?" AND
-    CMAKE_INSTALL_PREFIX MATCHES "^/usr.*")
-  # dist-packages is only used if we install below /usr and python's site packages
-  # path matches dist-packages
-  set(PYTHON_PACKAGE_PATH "dist-packages")
-else()
-  set(PYTHON_PACKAGE_PATH "site-packages")
-endif()
-if(PYTHON_VERSION_MAJOR)
-  set(PY_MAJOR ${PYTHON_VERSION_MAJOR})
-else()
-  set(PY_MAJOR ${Python3_VERSION_MAJOR})
-endif()
-if(PYTHON_VERSION_MINOR)
-  set(PY_MINOR ${PYTHON_VERSION_MINOR})
-else()
-  set(PY_MINOR ${Python3_VERSION_MINOR})
-endif()
-set(PYTHON_INSTALL_PREFIX "lib/python${PY_MAJOR}.${PY_MINOR}/${PYTHON_PACKAGE_PATH}" CACHE STRING "Subdirectory to install Python modules in")

cmake/Modules/UseDamaris.cmake

@@ -1,27 +0,0 @@
-if(USE_DAMARIS_LIB AND MPI_FOUND)
-  if (Damaris_FOUND)
-    set(HAVE_DAMARIS 1)
-    message(STATUS "The Damaris library was found: ${Damaris_VERSION} ${Damaris_DIR}")
-    if (Damaris_HAS_HDF5)
-      message(STATUS "The Damaris library has HDF5 support: ${HDF5_VERSION}")
-    else()
-      message(STATUS "The Damaris library does NOT have HDF5 support")
-    endif()
-    if (Damaris_HAS_VISIT)
-      message(STATUS "The Damaris library has VisIt support: ${VisIt_VERSION}")
-    else()
-      message(STATUS "The Damaris library does NOT have VisIt support")
-    endif()
-    if (Damaris_HAS_CATALYST)
-      message(STATUS "The Damaris library has Catalyst support: ${Catalyst_VERSION}  ${Paraview_VERSION}")
-    else()
-      message(STATUS "The Damaris library does NOT have Catalyst support")
-    endif()
-  else()
-    message(STATUS "The Damaris library was requested but NOT found")
-  endif()
-else()  # User did not request Damaris support
-  unset(HAVE_DAMARIS)
-endif()
-
-mark_as_advanced(HAVE_DAMARIS)

cmake/Modules/UseDynamicBoost.cmake

@@ -1,11 +1,4 @@
-# When using Boost >= 1.70 and e.g. CMake 3.18 we need to make sure that
-# subsequent searches are using config mode too. Otherwise the library
-# list will be completely messed up. We use a set Boost_Dir to detect that
-# previous searches were done using config mode.
-if(Boost_DIR)
-  set(_Boost_CONFIG_MODE CONFIG)
-endif()
-find_package (Boost 1.44.0 COMPONENTS unit_test_framework QUIET ${_Boost_CONFIG_MODE})
+find_package (Boost 1.44.0 COMPONENTS unit_test_framework QUIET)
 
 if (Boost_UNIT_TEST_FRAMEWORK_FOUND)
   # setup to do a test compile

cmake/Modules/UseOptimization.cmake

@@ -63,9 +63,9 @@ if (CXX_COMPAT_GCC)
 
   # use these options for release builds - full optimization
   add_options (ALL_LANGUAGES "${_prof_RELEASE}" ${_opt_rel} ${_opt_flags})
-  option(WITH_NDEBUG "Disable asserts in release mode" OFF)
-  if(NOT WITH_NDEBUG)
-    add_options (ALL_LANGUAGES "${_prof_RELEASE}" -UNDEBUG)
+  option(WITH_NDEBUG "Disable asserts in release mode" ON)
+  if(WITH_NDEBUG)
+    add_options (ALL_LANGUAGES "${_prof_RELEASE}" -DNDEBUG)
   endif()
 
 else ()

cmake/Modules/UseVersion.cmake

@@ -17,9 +17,6 @@ message("-- Writing version information to local header project-version.h")
 string (TIMESTAMP build_timestamp "%Y-%m-%d at %H:%M:%S hrs")
 
 string (TOUPPER "${CMAKE_BUILD_TYPE}" cmake_build_type_upper_)
-set(OPM_BINARY_PACKAGE_VERSION "" CACHE STRING
-  "Version of the binary Linux package built (will be printed in PRT file of flow if not empty)")
-string(LENGTH "${OPM_BINARY_PACKAGE_VERSION}" _BINARY_PACKAGE_VERSION_LENGTH)
 if (cmake_build_type_upper_ MATCHES DEBUG)
   file (WRITE "${PROJECT_BINARY_DIR}/project-version.h"
         "#ifndef OPM_GENERATED_OPM_VERSION_HEADER_INCLUDED\n"
@@ -27,16 +24,9 @@ if (cmake_build_type_upper_ MATCHES DEBUG)
         "#define PROJECT_VERSION_NAME \"${${project}_LABEL}\"\n"
         "#define PROJECT_VERSION_HASH \"debug\"\n"
         "#define PROJECT_VERSION \"${${project}_LABEL} (debug)\"\n"
+        "#define BUILD_TIMESTAMP \"${build_timestamp}\"\n"
         "#endif // OPM_GENERATED_OPM_VERSION_HEADER_INCLUDED\n"
 	)
-
-  # Write header file with build timestamp
-  file (WRITE "${PROJECT_BINARY_DIR}/project-timestamp.h"
-      "#ifndef OPM_GENERATED_OPM_TIMESTAMP_HEADER_INCLUDED\n"
-      "#define OPM_GENERATED_OPM_TIMESTAMP_HEADER_INCLUDED\n"
-      "#define BUILD_TIMESTAMP \"${build_timestamp}\"\n"
-      "#endif // OPM_GENERATED_OPM_TIMESTAMP_HEADER_INCLUDED\n"
-      )
 else ()
   if (NOT GIT_FOUND)
 	find_package (Git)
@@ -46,30 +36,16 @@ else ()
   # system, so there is "no" way we can update the SHA. notice
   # that this is a slightly different version of the label than
   # above.
-  if (NOT GIT_FOUND OR NOT EXISTS ${PROJECT_SOURCE_DIR}/.git)
-    if(_BINARY_PACKAGE_VERSION_LENGTH GREATER 0)
-      set(_PROJECT_VERSION_HASH "${OPM_BINARY_PACKAGE_VERSION}")
-    else()
-      set(_PROJECT_VERSION_HASH "unknown git version")
-    endif()
-    file (WRITE "${PROJECT_BINARY_DIR}/project-version.h"
-      "#ifndef OPM_GENERATED_OPM_VERSION_HEADER_INCLUDED\n"
-      "#define OPM_GENERATED_OPM_VERSION_HEADER_INCLUDED\n"
-      "#define PROJECT_VERSION_NAME \"${${project}_LABEL}\"\n"
-      "#define PROJECT_VERSION_HASH \"${_PROJECT_VERSION_HASH}\"\n"
-      "#define PROJECT_VERSION \"${${project}_LABEL} (${_PROJECT_VERSION_HASH})\"\n"
-      "#endif // OPM_GENERATED_OPM_VERSION_HEADER_INCLUDED\n"
-      )
-    # Write header file with build timestamp
-    file (WRITE "${PROJECT_BINARY_DIR}/project-timestamp.h"
-      "#ifndef OPM_GENERATED_OPM_TIMESTAMP_HEADER_INCLUDED\n"
-      "#define OPM_GENERATED_OPM_TIMESTAMP_HEADER_INCLUDED\n")
-    if (_BINARY_PACKAGE_VERSION_LENGTH EQUAL 0)
-      file(APPEND "${PROJECT_BINARY_DIR}/project-timestamp.h"
-	"#define BUILD_TIMESTAMP \"${build_timestamp}\"\n")
-    endif()
-    file(APPEND "${PROJECT_BINARY_DIR}/project-timestamp.h"
-      "#endif // OPM_GENERATED_OPM_TIMESTAMP_HEADER_INCLUDED\n")
+  if (NOT GIT_FOUND)
+	file (WRITE "${PROJECT_BINARY_DIR}/project-version.h"
+              "#ifndef OPM_GENERATED_OPM_VERSION_HEADER_INCLUDED\n"
+              "#define OPM_GENERATED_OPM_VERSION_HEADER_INCLUDED\n"
+              "#define PROJECT_VERSION_NAME \"${${project}_LABEL}\"\n"
+              "#define PROJECT_VERSION_HASH \"unknown git version\"\n"
+              "#define PROJECT_VERSION \"${${project}_LABEL} (unknown git version)\"\n"
+              "#define BUILD_TIMESTAMP \"${build_timestamp}\"\n"
+              "#endif // OPM_GENERATED_OPM_VERSION_HEADER_INCLUDED\n"
+              )
   else ()
 	add_custom_target (update-version ALL
 	  COMMAND ${CMAKE_COMMAND}

cmake/Modules/compat-2.8.3/CMakeParseArguments.cmake

@@ -0,0 +1,138 @@
+# CMAKE_PARSE_ARGUMENTS(<prefix> <options> <one_value_keywords> <multi_value_keywords> args...)
+#
+# CMAKE_PARSE_ARGUMENTS() is intended to be used in macros or functions for
+# parsing the arguments given to that macro or function.
+# It processes the arguments and defines a set of variables which hold the
+# values of the respective options.
+#
+# The <options> argument contains all options for the respective macro,
+# i.e. keywords which can be used when calling the macro without any value
+# following, like e.g. the OPTIONAL keyword of the install() command.
+#
+# The <one_value_keywords> argument contains all keywords for this macro
+# which are followed by one value, like e.g. DESTINATION keyword of the
+# install() command.
+#
+# The <multi_value_keywords> argument contains all keywords for this macro
+# which can be followed by more than one value, like e.g. the TARGETS or
+# FILES keywords of the install() command.
+#
+# When done, CMAKE_PARSE_ARGUMENTS() will have defined for each of the
+# keywords listed in <options>, <one_value_keywords> and
+# <multi_value_keywords> a variable composed of the given <prefix>
+# followed by "_" and the name of the respective keyword.
+# These variables will then hold the respective value from the argument list.
+# For the <options> keywords this will be TRUE or FALSE.
+#
+# All remaining arguments are collected in a variable
+# <prefix>_UNPARSED_ARGUMENTS, this can be checked afterwards to see whether
+# your macro was called with unrecognized parameters.
+#
+# As an example here a my_install() macro, which takes similar arguments as the
+# real install() command:
+#
+#   function(MY_INSTALL)
+#     set(options OPTIONAL FAST)
+#     set(oneValueArgs DESTINATION RENAME)
+#     set(multiValueArgs TARGETS CONFIGURATIONS)
+#     cmake_parse_arguments(MY_INSTALL "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN} )
+#     ...
+#
+# Assume my_install() has been called like this:
+#   my_install(TARGETS foo bar DESTINATION bin OPTIONAL blub)
+#
+# After the cmake_parse_arguments() call the macro will have set the following
+# variables:
+#   MY_INSTALL_OPTIONAL = TRUE
+#   MY_INSTALL_FAST = FALSE (this option was not used when calling my_install()
+#   MY_INSTALL_DESTINATION = "bin"
+#   MY_INSTALL_RENAME = "" (was not used)
+#   MY_INSTALL_TARGETS = "foo;bar"
+#   MY_INSTALL_CONFIGURATIONS = "" (was not used)
+#   MY_INSTALL_UNPARSED_ARGUMENTS = "blub" (no value expected after "OPTIONAL"
+#
+# You can the continue and process these variables.
+#
+# Keywords terminate lists of values, e.g. if directly after a one_value_keyword
+# another recognized keyword follows, this is interpreted as the beginning of
+# the new option.
+# E.g. my_install(TARGETS foo DESTINATION OPTIONAL) would result in
+# MY_INSTALL_DESTINATION set to "OPTIONAL", but MY_INSTALL_DESTINATION would
+# be empty and MY_INSTALL_OPTIONAL would be set to TRUE therefor.
+
+#=============================================================================
+# Copyright 2010 Alexander Neundorf <neundorf@kde.org>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+
+if(__CMAKE_PARSE_ARGUMENTS_INCLUDED)
+  return()
+endif()
+set(__CMAKE_PARSE_ARGUMENTS_INCLUDED TRUE)
+
+
+function(CMAKE_PARSE_ARGUMENTS prefix _optionNames _singleArgNames _multiArgNames)
+  # first set all result variables to empty/FALSE
+  foreach(arg_name ${_singleArgNames} ${_multiArgNames})
+    set(${prefix}_${arg_name})
+  endforeach(arg_name)
+
+  foreach(option ${_optionNames})
+    set(${prefix}_${option} FALSE)
+  endforeach(option)
+
+  set(${prefix}_UNPARSED_ARGUMENTS)
+
+  set(insideValues FALSE)
+  set(currentArgName)
+
+  # now iterate over all arguments and fill the result variables
+  foreach(currentArg ${ARGN})
+    list(FIND _optionNames "${currentArg}" optionIndex)  # ... then this marks the end of the arguments belonging to this keyword
+    list(FIND _singleArgNames "${currentArg}" singleArgIndex)  # ... then this marks the end of the arguments belonging to this keyword
+    list(FIND _multiArgNames "${currentArg}" multiArgIndex)  # ... then this marks the end of the arguments belonging to this keyword
+
+    if(${optionIndex} EQUAL -1  AND  ${singleArgIndex} EQUAL -1  AND  ${multiArgIndex} EQUAL -1)
+      if(insideValues)
+        if("${insideValues}" STREQUAL "SINGLE")
+          set(${prefix}_${currentArgName} ${currentArg})
+          set(insideValues FALSE)
+        elseif("${insideValues}" STREQUAL "MULTI")
+          list(APPEND ${prefix}_${currentArgName} ${currentArg})
+        endif()
+      else(insideValues)
+        list(APPEND ${prefix}_UNPARSED_ARGUMENTS ${currentArg})
+      endif(insideValues)
+    else()
+      if(NOT ${optionIndex} EQUAL -1)
+        set(${prefix}_${currentArg} TRUE)
+        set(insideValues FALSE)
+      elseif(NOT ${singleArgIndex} EQUAL -1)
+        set(currentArgName ${currentArg})
+        set(${prefix}_${currentArgName})
+        set(insideValues "SINGLE")
+      elseif(NOT ${multiArgIndex} EQUAL -1)
+        set(currentArgName ${currentArg})
+        set(${prefix}_${currentArgName})
+        set(insideValues "MULTI")
+      endif()
+    endif()
+
+  endforeach(currentArg)
+
+  # propagate the result variables to the caller:
+  foreach(arg_name ${_singleArgNames} ${_multiArgNames} ${_optionNames})
+    set(${prefix}_${arg_name}  ${${prefix}_${arg_name}} PARENT_SCOPE)
+  endforeach(arg_name)
+  set(${prefix}_UNPARSED_ARGUMENTS ${${prefix}_UNPARSED_ARGUMENTS} PARENT_SCOPE)
+
+endfunction(CMAKE_PARSE_ARGUMENTS _options _singleArgs _multiArgs)

cmake/Modules/compat-2.8.5/FindGit.cmake

@@ -0,0 +1,47 @@
+# The module defines the following variables:
+#   GIT_EXECUTABLE - path to git command line client
+#   GIT_FOUND - true if the command line client was found
+# Example usage:
+#   find_package(Git)
+#   if(GIT_FOUND)
+#     message("git found: ${GIT_EXECUTABLE}")
+#   endif()
+
+#=============================================================================
+# Copyright 2010 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# Look for 'git' or 'eg' (easy git)
+#
+set(git_names git eg)
+
+# Prefer .cmd variants on Windows unless running in a Makefile
+# in the MSYS shell.
+#
+if(WIN32)
+  if(NOT CMAKE_GENERATOR MATCHES "MSYS")
+    set(git_names git.cmd git eg.cmd eg)
+  endif()
+endif()
+
+find_program(GIT_EXECUTABLE
+  NAMES ${git_names}
+  PATH_SUFFIXES Git/cmd Git/bin
+  DOC "git command line client"
+  )
+mark_as_advanced(GIT_EXECUTABLE)
+
+# Handle the QUIETLY and REQUIRED arguments and set GIT_FOUND to TRUE if
+# all listed variables are TRUE
+
+include(FindPackageHandleStandardArgs)
+find_package_handle_standard_args(Git DEFAULT_MSG GIT_EXECUTABLE)

cmake/Modules/compat-2.8.7/CMakePushCheckState.cmake

@@ -0,0 +1,61 @@
+# This module defines two macros:
+# CMAKE_PUSH_CHECK_STATE()
+# and
+# CMAKE_POP_CHECK_STATE()
+# These two macros can be used to save and restore the state of the variables
+# CMAKE_REQUIRED_FLAGS, CMAKE_REQUIRED_DEFINITIONS, CMAKE_REQUIRED_LIBRARIES
+# and CMAKE_REQUIRED_INCLUDES used by the various Check-files coming with CMake,
+# like e.g. check_function_exists() etc.
+# The variable contents are pushed on a stack, pushing multiple times is supported.
+# This is useful e.g. when executing such tests in a Find-module, where they have to be set,
+# but after the Find-module has been executed they should have the same value
+# as they had before.
+#
+# Usage:
+#   cmake_push_check_state()
+#   set(CMAKE_REQUIRED_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS} -DSOME_MORE_DEF)
+#   check_function_exists(...)
+#   cmake_pop_check_state()
+
+#=============================================================================
+# Copyright 2006-2011 Alexander Neundorf, <neundorf@kde.org>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+
+MACRO(CMAKE_PUSH_CHECK_STATE)
+
+   IF(NOT DEFINED _CMAKE_PUSH_CHECK_STATE_COUNTER)
+      SET(_CMAKE_PUSH_CHECK_STATE_COUNTER 0)
+   ENDIF()
+
+   MATH(EXPR _CMAKE_PUSH_CHECK_STATE_COUNTER "${_CMAKE_PUSH_CHECK_STATE_COUNTER}+1")
+
+   SET(_CMAKE_REQUIRED_INCLUDES_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}    ${CMAKE_REQUIRED_INCLUDES})
+   SET(_CMAKE_REQUIRED_DEFINITIONS_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER} ${CMAKE_REQUIRED_DEFINITIONS})
+   SET(_CMAKE_REQUIRED_LIBRARIES_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}   ${CMAKE_REQUIRED_LIBRARIES})
+   SET(_CMAKE_REQUIRED_FLAGS_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}       ${CMAKE_REQUIRED_FLAGS})
+ENDMACRO(CMAKE_PUSH_CHECK_STATE)
+
+MACRO(CMAKE_POP_CHECK_STATE)
+
+# don't pop more than we pushed
+   IF("${_CMAKE_PUSH_CHECK_STATE_COUNTER}" GREATER "0")
+
+      SET(CMAKE_REQUIRED_INCLUDES    ${_CMAKE_REQUIRED_INCLUDES_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}})
+      SET(CMAKE_REQUIRED_DEFINITIONS ${_CMAKE_REQUIRED_DEFINITIONS_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}})
+      SET(CMAKE_REQUIRED_LIBRARIES   ${_CMAKE_REQUIRED_LIBRARIES_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}})
+      SET(CMAKE_REQUIRED_FLAGS       ${_CMAKE_REQUIRED_FLAGS_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}})
+
+      MATH(EXPR _CMAKE_PUSH_CHECK_STATE_COUNTER "${_CMAKE_PUSH_CHECK_STATE_COUNTER}-1")
+   ENDIF()
+
+ENDMACRO(CMAKE_POP_CHECK_STATE)

cmake/Modules/compat-2.8.7/FindBLAS.cmake

@@ -0,0 +1,624 @@
+# - Find BLAS library
+# This module finds an installed fortran library that implements the BLAS
+# linear-algebra interface (see http://www.netlib.org/blas/).
+# The list of libraries searched for is taken
+# from the autoconf macro file, acx_blas.m4 (distributed at
+# http://ac-archive.sourceforge.net/ac-archive/acx_blas.html).
+#
+# This module sets the following variables:
+#  BLAS_FOUND - set to true if a library implementing the BLAS interface
+#    is found
+#  BLAS_LINKER_FLAGS - uncached list of required linker flags (excluding -l
+#    and -L).
+#  BLAS_LIBRARIES - uncached list of libraries (using full path name) to
+#    link against to use BLAS
+#  BLAS95_LIBRARIES - uncached list of libraries (using full path name)
+#    to link against to use BLAS95 interface
+#  BLAS95_FOUND - set to true if a library implementing the BLAS f95 interface
+#    is found
+#  BLA_STATIC  if set on this determines what kind of linkage we do (static)
+#  BLA_VENDOR  if set checks only the specified vendor, if not set checks
+#     all the possibilities
+#  BLA_F95     if set on tries to find the f95 interfaces for BLAS/LAPACK
+##########
+### List of vendors (BLA_VENDOR) valid in this module
+##  Goto,ATLAS PhiPACK,CXML,DXML,SunPerf,SCSL,SGIMATH,IBMESSL,Intel10_32 (intel mkl v10 32 bit),Intel10_64lp (intel mkl v10 64 bit,lp thread model, lp64 model),
+##  Intel( older versions of mkl 32 and 64 bit), ACML,ACML_MP,ACML_GPU,Apple, NAS, Generic
+# C/CXX should be enabled to use Intel mkl
+
+#=============================================================================
+# Copyright 2007-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+include(CheckFunctionExists)
+include(CheckFortranFunctionExists)
+
+set(_blas_ORIG_CMAKE_FIND_LIBRARY_SUFFIXES ${CMAKE_FIND_LIBRARY_SUFFIXES})
+
+# Check the language being used
+get_property( _LANGUAGES_ GLOBAL PROPERTY ENABLED_LANGUAGES )
+if( _LANGUAGES_ MATCHES Fortran )
+  set( _CHECK_FORTRAN TRUE )
+elseif( (_LANGUAGES_ MATCHES C) OR (_LANGUAGES_ MATCHES CXX) )
+  set( _CHECK_FORTRAN FALSE )
+else()
+  if(BLAS_FIND_REQUIRED)
+    message(FATAL_ERROR "FindBLAS requires Fortran, C, or C++ to be enabled.")
+  else(BLAS_FIND_REQUIRED)
+    message(STATUS "Looking for BLAS... - NOT found (Unsupported languages)")
+    return()
+  endif(BLAS_FIND_REQUIRED)
+endif( )
+
+macro(Check_Fortran_Libraries LIBRARIES _prefix _name _flags _list _thread)
+# This macro checks for the existence of the combination of fortran libraries
+# given by _list.  If the combination is found, this macro checks (using the
+# Check_Fortran_Function_Exists macro) whether can link against that library
+# combination using the name of a routine given by _name using the linker
+# flags given by _flags.  If the combination of libraries is found and passes
+# the link test, LIBRARIES is set to the list of complete library paths that
+# have been found.  Otherwise, LIBRARIES is set to FALSE.
+
+# N.B. _prefix is the prefix applied to the names of all cached variables that
+# are generated internally and marked advanced by this macro.
+
+set(_libdir ${ARGN})
+
+set(_libraries_work TRUE)
+set(${LIBRARIES})
+set(_combined_name)
+if (NOT _libdir)
+  if (WIN32)
+    set(_libdir ENV LIB)
+  elseif (APPLE)
+    set(_libdir /usr/local/lib /usr/lib /usr/local/lib64 /usr/lib64 ENV DYLD_LIBRARY_PATH)
+  else ()
+    set(_libdir /usr/local/lib /usr/lib /usr/local/lib64 /usr/lib64 ENV LD_LIBRARY_PATH)
+  endif ()
+endif ()
+foreach(_library ${_list})
+  set(_combined_name ${_combined_name}_${_library})
+
+  if(_libraries_work)
+    if (BLA_STATIC)
+      if (WIN32)
+        set(CMAKE_FIND_LIBRARY_SUFFIXES .lib ${CMAKE_FIND_LIBRARY_SUFFIXES})
+      endif ( WIN32 )
+      if (APPLE)
+        set(CMAKE_FIND_LIBRARY_SUFFIXES .lib ${CMAKE_FIND_LIBRARY_SUFFIXES})
+      else (APPLE)
+        set(CMAKE_FIND_LIBRARY_SUFFIXES .a ${CMAKE_FIND_LIBRARY_SUFFIXES})
+      endif (APPLE)
+    else (BLA_STATIC)
+      if (CMAKE_SYSTEM_NAME STREQUAL "Linux")
+        # for ubuntu's libblas3gf and liblapack3gf packages
+        set(CMAKE_FIND_LIBRARY_SUFFIXES ${CMAKE_FIND_LIBRARY_SUFFIXES} .so.3gf)
+      endif ()
+    endif (BLA_STATIC)
+    find_library(${_prefix}_${_library}_LIBRARY
+      NAMES ${_library}
+      PATHS ${_libdir}
+      )
+    mark_as_advanced(${_prefix}_${_library}_LIBRARY)
+    set(${LIBRARIES} ${${LIBRARIES}} ${${_prefix}_${_library}_LIBRARY})
+    set(_libraries_work ${${_prefix}_${_library}_LIBRARY})
+  endif(_libraries_work)
+endforeach(_library ${_list})
+if(_libraries_work)
+  # Test this combination of libraries.
+  set(CMAKE_REQUIRED_LIBRARIES ${_flags} ${${LIBRARIES}} ${_threads})
+#  message("DEBUG: CMAKE_REQUIRED_LIBRARIES = ${CMAKE_REQUIRED_LIBRARIES}")
+  if (_CHECK_FORTRAN)
+    check_fortran_function_exists("${_name}" ${_prefix}${_combined_name}_WORKS)
+  else()
+    check_function_exists("${_name}_" ${_prefix}${_combined_name}_WORKS)
+  endif()
+  set(CMAKE_REQUIRED_LIBRARIES)
+  mark_as_advanced(${_prefix}${_combined_name}_WORKS)
+  set(_libraries_work ${${_prefix}${_combined_name}_WORKS})
+endif(_libraries_work)
+if(NOT _libraries_work)
+  set(${LIBRARIES} FALSE)
+endif(NOT _libraries_work)
+#message("DEBUG: ${LIBRARIES} = ${${LIBRARIES}}")
+endmacro(Check_Fortran_Libraries)
+
+set(BLAS_LINKER_FLAGS)
+set(BLAS_LIBRARIES)
+set(BLAS95_LIBRARIES)
+if ($ENV{BLA_VENDOR} MATCHES ".+")
+  set(BLA_VENDOR $ENV{BLA_VENDOR})
+else ($ENV{BLA_VENDOR} MATCHES ".+")
+  if(NOT BLA_VENDOR)
+    set(BLA_VENDOR "All")
+  endif(NOT BLA_VENDOR)
+endif ($ENV{BLA_VENDOR} MATCHES ".+")
+
+if (BLA_VENDOR STREQUAL "Goto" OR BLA_VENDOR STREQUAL "All")
+ if(NOT BLAS_LIBRARIES)
+  # gotoblas (http://www.tacc.utexas.edu/tacc-projects/gotoblas2)
+  check_fortran_libraries(
+  BLAS_LIBRARIES
+  BLAS
+  sgemm
+  ""
+  "goto2"
+  ""
+  )
+ endif(NOT BLAS_LIBRARIES)
+endif (BLA_VENDOR STREQUAL "Goto" OR BLA_VENDOR STREQUAL "All")
+
+if (BLA_VENDOR STREQUAL "ATLAS" OR BLA_VENDOR STREQUAL "All")
+ if(NOT BLAS_LIBRARIES)
+  # BLAS in ATLAS library? (http://math-atlas.sourceforge.net/)
+  check_fortran_libraries(
+  BLAS_LIBRARIES
+  BLAS
+  dgemm
+  ""
+  "f77blas;atlas"
+  ""
+  )
+ endif(NOT BLAS_LIBRARIES)
+endif (BLA_VENDOR STREQUAL "ATLAS" OR BLA_VENDOR STREQUAL "All")
+
+# BLAS in PhiPACK libraries? (requires generic BLAS lib, too)
+if (BLA_VENDOR STREQUAL "PhiPACK" OR BLA_VENDOR STREQUAL "All")
+ if(NOT BLAS_LIBRARIES)
+  check_fortran_libraries(
+  BLAS_LIBRARIES
+  BLAS
+  sgemm
+  ""
+  "sgemm;dgemm;blas"
+  ""
+  )
+ endif(NOT BLAS_LIBRARIES)
+endif (BLA_VENDOR STREQUAL "PhiPACK" OR BLA_VENDOR STREQUAL "All")
+
+# BLAS in Alpha CXML library?
+if (BLA_VENDOR STREQUAL "CXML" OR BLA_VENDOR STREQUAL "All")
+ if(NOT BLAS_LIBRARIES)
+  check_fortran_libraries(
+  BLAS_LIBRARIES
+  BLAS
+  sgemm
+  ""
+  "cxml"
+  ""
+  )
+ endif(NOT BLAS_LIBRARIES)
+endif (BLA_VENDOR STREQUAL "CXML" OR BLA_VENDOR STREQUAL "All")
+
+# BLAS in Alpha DXML library? (now called CXML, see above)
+if (BLA_VENDOR STREQUAL "DXML" OR BLA_VENDOR STREQUAL "All")
+ if(NOT BLAS_LIBRARIES)
+  check_fortran_libraries(
+  BLAS_LIBRARIES
+  BLAS
+  sgemm
+  ""
+  "dxml"
+  ""
+  )
+ endif(NOT BLAS_LIBRARIES)
+endif (BLA_VENDOR STREQUAL "DXML" OR BLA_VENDOR STREQUAL "All")
+
+# BLAS in Sun Performance library?
+if (BLA_VENDOR STREQUAL "SunPerf" OR BLA_VENDOR STREQUAL "All")
+ if(NOT BLAS_LIBRARIES)
+  check_fortran_libraries(
+  BLAS_LIBRARIES
+  BLAS
+  sgemm
+  "-xlic_lib=sunperf"
+  "sunperf;sunmath"
+  ""
+  )
+  if(BLAS_LIBRARIES)
+    set(BLAS_LINKER_FLAGS "-xlic_lib=sunperf")
+  endif(BLAS_LIBRARIES)
+ endif(NOT BLAS_LIBRARIES)
+endif (BLA_VENDOR STREQUAL "SunPerf" OR BLA_VENDOR STREQUAL "All")
+
+# BLAS in SCSL library?  (SGI/Cray Scientific Library)
+if (BLA_VENDOR STREQUAL "SCSL" OR BLA_VENDOR STREQUAL "All")
+ if(NOT BLAS_LIBRARIES)
+  check_fortran_libraries(
+  BLAS_LIBRARIES
+  BLAS
+  sgemm
+  ""
+  "scsl"
+  ""
+  )
+ endif(NOT BLAS_LIBRARIES)
+endif (BLA_VENDOR STREQUAL "SCSL" OR BLA_VENDOR STREQUAL "All")
+
+# BLAS in SGIMATH library?
+if (BLA_VENDOR STREQUAL "SGIMATH" OR BLA_VENDOR STREQUAL "All")
+ if(NOT BLAS_LIBRARIES)
+  check_fortran_libraries(
+  BLAS_LIBRARIES
+  BLAS
+  sgemm
+  ""
+  "complib.sgimath"
+  ""
+  )
+ endif(NOT BLAS_LIBRARIES)
+endif (BLA_VENDOR STREQUAL "SGIMATH" OR BLA_VENDOR STREQUAL "All")
+
+# BLAS in IBM ESSL library? (requires generic BLAS lib, too)
+if (BLA_VENDOR STREQUAL "IBMESSL" OR BLA_VENDOR STREQUAL "All")
+ if(NOT BLAS_LIBRARIES)
+  check_fortran_libraries(
+  BLAS_LIBRARIES
+  BLAS
+  sgemm
+  ""
+  "essl;blas"
+  ""
+  )
+ endif(NOT BLAS_LIBRARIES)
+endif (BLA_VENDOR STREQUAL "IBMESSL" OR BLA_VENDOR STREQUAL "All")
+
+#BLAS in acml library?
+if (BLA_VENDOR MATCHES "ACML.*" OR BLA_VENDOR STREQUAL "All")
+ if( ((BLA_VENDOR STREQUAL "ACML") AND (NOT BLAS_ACML_LIB_DIRS)) OR
+     ((BLA_VENDOR STREQUAL "ACML_MP") AND (NOT BLAS_ACML_MP_LIB_DIRS)) OR
+     ((BLA_VENDOR STREQUAL "ACML_GPU") AND (NOT BLAS_ACML_GPU_LIB_DIRS))
+   )
+   # try to find acml in "standard" paths
+   if( WIN32 )
+    file( GLOB _ACML_ROOT "C:/AMD/acml*/ACML-EULA.txt" )
+   else()
+    file( GLOB _ACML_ROOT "/opt/acml*/ACML-EULA.txt" )
+   endif()
+   if( WIN32 )
+    file( GLOB _ACML_GPU_ROOT "C:/AMD/acml*/GPGPUexamples" )
+   else()
+    file( GLOB _ACML_GPU_ROOT "/opt/acml*/GPGPUexamples" )
+   endif()
+   list(GET _ACML_ROOT 0 _ACML_ROOT)
+   list(GET _ACML_GPU_ROOT 0 _ACML_GPU_ROOT)
+   if( _ACML_ROOT )
+    get_filename_component( _ACML_ROOT ${_ACML_ROOT} PATH )
+    if( SIZEOF_INTEGER EQUAL 8 )
+     set( _ACML_PATH_SUFFIX "_int64" )
+    else()
+    set( _ACML_PATH_SUFFIX "" )
+   endif()
+   if( CMAKE_Fortran_COMPILER_ID STREQUAL "Intel" )
+    set( _ACML_COMPILER32 "ifort32" )
+    set( _ACML_COMPILER64 "ifort64" )
+   elseif( CMAKE_Fortran_COMPILER_ID STREQUAL "SunPro" )
+    set( _ACML_COMPILER32 "sun32" )
+    set( _ACML_COMPILER64 "sun64" )
+   elseif( CMAKE_Fortran_COMPILER_ID STREQUAL "PGI" )
+    set( _ACML_COMPILER32 "pgi32" )
+    if( WIN32 )
+     set( _ACML_COMPILER64 "win64" )
+    else()
+     set( _ACML_COMPILER64 "pgi64" )
+    endif()
+   elseif( CMAKE_Fortran_COMPILER_ID STREQUAL "Open64" )
+    # 32 bit builds not supported on Open64 but for code simplicity
+    # We'll just use the same directory twice
+    set( _ACML_COMPILER32 "open64_64" )
+    set( _ACML_COMPILER64 "open64_64" )
+   elseif( CMAKE_Fortran_COMPILER_ID STREQUAL "NAG" )
+    set( _ACML_COMPILER32 "nag32" )
+    set( _ACML_COMPILER64 "nag64" )
+   else() #if( CMAKE_Fortran_COMPILER_ID STREQUAL "GNU" )
+    set( _ACML_COMPILER32 "gfortran32" )
+    set( _ACML_COMPILER64 "gfortran64" )
+   endif()
+
+   if( BLA_VENDOR STREQUAL "ACML_MP" )
+    set(_ACML_MP_LIB_DIRS
+     "${_ACML_ROOT}/${_ACML_COMPILER32}_mp${_ACML_PATH_SUFFIX}/lib"
+     "${_ACML_ROOT}/${_ACML_COMPILER64}_mp${_ACML_PATH_SUFFIX}/lib" )
+   else() #if( _BLAS_VENDOR STREQUAL "ACML" )
+    set(_ACML_LIB_DIRS
+     "${_ACML_ROOT}/${_ACML_COMPILER32}${_ACML_PATH_SUFFIX}/lib"
+     "${_ACML_ROOT}/${_ACML_COMPILER64}${_ACML_PATH_SUFFIX}/lib" )
+   endif()
+  endif()
+ elseif(BLAS_${BLA_VENDOR}_LIB_DIRS)
+   set(_${BLA_VENDOR}_LIB_DIRS ${BLAS_${BLA_VENDOR}_LIB_DIRS})
+ endif()
+
+ if( BLA_VENDOR STREQUAL "ACML_MP" )
+  foreach( BLAS_ACML_MP_LIB_DIRS ${_ACML_MP_LIB_DIRS})
+   check_fortran_libraries (
+     BLAS_LIBRARIES
+     BLAS
+     sgemm
+     "" "acml_mp;acml_mv" "" ${BLAS_ACML_MP_LIB_DIRS}
+   )
+   if( BLAS_LIBRARIES )
+    break()
+   endif()
+  endforeach()
+ elseif( BLA_VENDOR STREQUAL "ACML_GPU" )
+  foreach( BLAS_ACML_GPU_LIB_DIRS ${_ACML_GPU_LIB_DIRS})
+   check_fortran_libraries (
+     BLAS_LIBRARIES
+     BLAS
+     sgemm
+     "" "acml;acml_mv;CALBLAS" "" ${BLAS_ACML_GPU_LIB_DIRS}
+   )
+   if( BLAS_LIBRARIES )
+    break()
+   endif()
+  endforeach()
+ else() #if( _BLAS_VENDOR STREQUAL "ACML" )
+  foreach( BLAS_ACML_LIB_DIRS ${_ACML_LIB_DIRS} )
+   check_fortran_libraries (
+     BLAS_LIBRARIES
+     BLAS
+     sgemm
+     "" "acml;acml_mv" "" ${BLAS_ACML_LIB_DIRS}
+   )
+   if( BLAS_LIBRARIES )
+    break()
+   endif()
+  endforeach()
+ endif()
+
+ # Either acml or acml_mp should be in LD_LIBRARY_PATH but not both
+ if(NOT BLAS_LIBRARIES)
+  check_fortran_libraries(
+  BLAS_LIBRARIES
+  BLAS
+  sgemm
+  ""
+  "acml;acml_mv"
+  ""
+  )
+ endif(NOT BLAS_LIBRARIES)
+ if(NOT BLAS_LIBRARIES)
+  check_fortran_libraries(
+  BLAS_LIBRARIES
+  BLAS
+  sgemm
+  ""
+  "acml_mp;acml_mv"
+  ""
+  )
+ endif(NOT BLAS_LIBRARIES)
+ if(NOT BLAS_LIBRARIES)
+  check_fortran_libraries(
+  BLAS_LIBRARIES
+  BLAS
+  sgemm
+  ""
+  "acml;acml_mv;CALBLAS"
+  ""
+  )
+ endif(NOT BLAS_LIBRARIES)
+endif () # ACML
+
+# Apple BLAS library?
+if (BLA_VENDOR STREQUAL "Apple" OR BLA_VENDOR STREQUAL "All")
+if(NOT BLAS_LIBRARIES)
+  check_fortran_libraries(
+  BLAS_LIBRARIES
+  BLAS
+  dgemm
+  ""
+  "Accelerate"
+  ""
+  )
+ endif(NOT BLAS_LIBRARIES)
+endif (BLA_VENDOR STREQUAL "Apple" OR BLA_VENDOR STREQUAL "All")
+
+if (BLA_VENDOR STREQUAL "NAS" OR BLA_VENDOR STREQUAL "All")
+ if ( NOT BLAS_LIBRARIES )
+    check_fortran_libraries(
+    BLAS_LIBRARIES
+    BLAS
+    dgemm
+    ""
+    "vecLib"
+    ""
+    )
+ endif ( NOT BLAS_LIBRARIES )
+endif (BLA_VENDOR STREQUAL "NAS" OR BLA_VENDOR STREQUAL "All")
+# Generic BLAS library?
+if (BLA_VENDOR STREQUAL "Generic" OR BLA_VENDOR STREQUAL "All")
+ if(NOT BLAS_LIBRARIES)
+  check_fortran_libraries(
+  BLAS_LIBRARIES
+  BLAS
+  sgemm
+  ""
+  "blas"
+  ""
+  )
+ endif(NOT BLAS_LIBRARIES)
+endif (BLA_VENDOR STREQUAL "Generic" OR BLA_VENDOR STREQUAL "All")
+
+#BLAS in intel mkl 10 library? (em64t 64bit)
+if (BLA_VENDOR MATCHES "Intel*" OR BLA_VENDOR STREQUAL "All")
+ if (NOT WIN32)
+  set(LM "-lm")
+ endif ()
+ if (_LANGUAGES_ MATCHES C OR _LANGUAGES_ MATCHES CXX)
+  if(BLAS_FIND_QUIETLY OR NOT BLAS_FIND_REQUIRED)
+    find_package(Threads)
+  else(BLAS_FIND_QUIETLY OR NOT BLAS_FIND_REQUIRED)
+    find_package(Threads REQUIRED)
+  endif(BLAS_FIND_QUIETLY OR NOT BLAS_FIND_REQUIRED)
+  if (WIN32)
+  if(BLA_F95)
+    if(NOT BLAS95_LIBRARIES)
+    check_fortran_libraries(
+    BLAS95_LIBRARIES
+    BLAS
+    sgemm
+    ""
+    "mkl_blas95;mkl_intel_c;mkl_intel_thread;mkl_core;libguide40"
+    ""
+    )
+    endif(NOT BLAS95_LIBRARIES)
+  else(BLA_F95)
+    if(NOT BLAS_LIBRARIES)
+    check_fortran_libraries(
+    BLAS_LIBRARIES
+    BLAS
+    SGEMM
+    ""
+    "mkl_c_dll;mkl_intel_thread_dll;mkl_core_dll;libguide40"
+    ""
+    )
+    endif(NOT BLAS_LIBRARIES)
+  endif(BLA_F95)
+  else(WIN32)
+  if (BLA_VENDOR STREQUAL "Intel10_32" OR BLA_VENDOR STREQUAL "All")
+    if(BLA_F95)
+      if(NOT BLAS95_LIBRARIES)
+      check_fortran_libraries(
+      BLAS95_LIBRARIES
+      BLAS
+      sgemm
+      ""
+      "mkl_blas95;mkl_intel;mkl_intel_thread;mkl_core;guide"
+      "${CMAKE_THREAD_LIBS_INIT};${LM}"
+      )
+      endif(NOT BLAS95_LIBRARIES)
+    else(BLA_F95)
+    if(NOT BLAS_LIBRARIES)
+      check_fortran_libraries(
+      BLAS_LIBRARIES
+      BLAS
+      sgemm
+      ""
+      "mkl_intel;mkl_intel_thread;mkl_core;guide"
+      "${CMAKE_THREAD_LIBS_INIT}"
+      "${LM}"
+      )
+      endif(NOT BLAS_LIBRARIES)
+    endif(BLA_F95)
+  endif (BLA_VENDOR STREQUAL "Intel10_32" OR BLA_VENDOR STREQUAL "All")
+  if (BLA_VENDOR STREQUAL "Intel10_64lp" OR BLA_VENDOR STREQUAL "All")
+   if(BLA_F95)
+    if(NOT BLAS95_LIBRARIES)
+      check_fortran_libraries(
+      BLAS95_LIBRARIES
+      BLAS
+      sgemm
+      ""
+      "mkl_blas95;mkl_intel_lp64;mkl_intel_thread;mkl_core;guide"
+      "${CMAKE_THREAD_LIBS_INIT};${LM}"
+      )
+    endif(NOT BLAS95_LIBRARIES)
+   else(BLA_F95)
+     if(NOT BLAS_LIBRARIES)
+      check_fortran_libraries(
+      BLAS_LIBRARIES
+      BLAS
+      sgemm
+      ""
+      "mkl_intel_lp64;mkl_intel_thread;mkl_core;guide"
+      "${CMAKE_THREAD_LIBS_INIT};${LM}"
+      )
+     endif(NOT BLAS_LIBRARIES)
+   endif(BLA_F95)
+  endif (BLA_VENDOR STREQUAL "Intel10_64lp" OR BLA_VENDOR STREQUAL "All")
+  endif (WIN32)
+  #older vesions of intel mkl libs
+  # BLAS in intel mkl library? (shared)
+  if(NOT BLAS_LIBRARIES)
+    check_fortran_libraries(
+    BLAS_LIBRARIES
+    BLAS
+    sgemm
+    ""
+    "mkl;guide"
+    "${CMAKE_THREAD_LIBS_INIT};${LM}"
+    )
+  endif(NOT BLAS_LIBRARIES)
+  #BLAS in intel mkl library? (static, 32bit)
+  if(NOT BLAS_LIBRARIES)
+    check_fortran_libraries(
+    BLAS_LIBRARIES
+    BLAS
+    sgemm
+    ""
+    "mkl_ia32;guide"
+    "${CMAKE_THREAD_LIBS_INIT};${LM}"
+    )
+  endif(NOT BLAS_LIBRARIES)
+  #BLAS in intel mkl library? (static, em64t 64bit)
+  if(NOT BLAS_LIBRARIES)
+    check_fortran_libraries(
+    BLAS_LIBRARIES
+    BLAS
+    sgemm
+    ""
+    "mkl_em64t;guide"
+    "${CMAKE_THREAD_LIBS_INIT};${LM}"
+    )
+  endif(NOT BLAS_LIBRARIES)
+ endif (_LANGUAGES_ MATCHES C OR _LANGUAGES_ MATCHES CXX)
+endif (BLA_VENDOR MATCHES "Intel*" OR BLA_VENDOR STREQUAL "All")
+
+
+if(BLA_F95)
+ if(BLAS95_LIBRARIES)
+    set(BLAS95_FOUND TRUE)
+  else(BLAS95_LIBRARIES)
+    set(BLAS95_FOUND FALSE)
+  endif(BLAS95_LIBRARIES)
+
+  if(NOT BLAS_FIND_QUIETLY)
+    if(BLAS95_FOUND)
+      message(STATUS "A library with BLAS95 API found.")
+    else(BLAS95_FOUND)
+      if(BLAS_FIND_REQUIRED)
+        message(FATAL_ERROR
+        "A required library with BLAS95 API not found. Please specify library location.")
+      else(BLAS_FIND_REQUIRED)
+        message(STATUS
+        "A library with BLAS95 API not found. Please specify library location.")
+      endif(BLAS_FIND_REQUIRED)
+    endif(BLAS95_FOUND)
+  endif(NOT BLAS_FIND_QUIETLY)
+  set(BLAS_FOUND TRUE)
+  set(BLAS_LIBRARIES "${BLAS95_LIBRARIES}")
+else(BLA_F95)
+  if(BLAS_LIBRARIES)
+    set(BLAS_FOUND TRUE)
+  else(BLAS_LIBRARIES)
+    set(BLAS_FOUND FALSE)
+  endif(BLAS_LIBRARIES)
+
+  if(NOT BLAS_FIND_QUIETLY)
+    if(BLAS_FOUND)
+      message(STATUS "A library with BLAS API found.")
+    else(BLAS_FOUND)
+      if(BLAS_FIND_REQUIRED)
+        message(FATAL_ERROR
+        "A required library with BLAS API not found. Please specify library location."
+        )
+      else(BLAS_FIND_REQUIRED)
+        message(STATUS
+        "A library with BLAS API not found. Please specify library location."
+        )
+      endif(BLAS_FIND_REQUIRED)
+    endif(BLAS_FOUND)
+  endif(NOT BLAS_FIND_QUIETLY)
+endif(BLA_F95)
+
+set(CMAKE_FIND_LIBRARY_SUFFIXES ${_blas_ORIG_CMAKE_FIND_LIBRARY_SUFFIXES})

cmake/Modules/compat-2.8.7/FindLAPACK.cmake

@@ -0,0 +1,307 @@
+# - Find LAPACK library
+# This module finds an installed fortran library that implements the LAPACK
+# linear-algebra interface (see http://www.netlib.org/lapack/).
+#
+# The approach follows that taken for the autoconf macro file, acx_lapack.m4
+# (distributed at http://ac-archive.sourceforge.net/ac-archive/acx_lapack.html).
+#
+# This module sets the following variables:
+#  LAPACK_FOUND - set to true if a library implementing the LAPACK interface
+#    is found
+#  LAPACK_LINKER_FLAGS - uncached list of required linker flags (excluding -l
+#    and -L).
+#  LAPACK_LIBRARIES - uncached list of libraries (using full path name) to
+#    link against to use LAPACK
+#  LAPACK95_LIBRARIES - uncached list of libraries (using full path name) to
+#    link against to use LAPACK95
+#  LAPACK95_FOUND - set to true if a library implementing the LAPACK f95
+#    interface is found
+#  BLA_STATIC  if set on this determines what kind of linkage we do (static)
+#  BLA_VENDOR  if set checks only the specified vendor, if not set checks
+#     all the possibilities
+#  BLA_F95     if set on tries to find the f95 interfaces for BLAS/LAPACK
+### List of vendors (BLA_VENDOR) valid in this module
+##  Intel(mkl), ACML,Apple, NAS, Generic
+
+#=============================================================================
+# Copyright 2007-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+set(_lapack_ORIG_CMAKE_FIND_LIBRARY_SUFFIXES ${CMAKE_FIND_LIBRARY_SUFFIXES})
+
+get_property(_LANGUAGES_ GLOBAL PROPERTY ENABLED_LANGUAGES)
+if (NOT _LANGUAGES_ MATCHES Fortran)
+include(CheckFunctionExists)
+else (NOT _LANGUAGES_ MATCHES Fortran)
+include(CheckFortranFunctionExists)
+endif (NOT _LANGUAGES_ MATCHES Fortran)
+
+set(LAPACK_FOUND FALSE)
+set(LAPACK95_FOUND FALSE)
+
+# TODO: move this stuff to separate module
+
+macro(Check_Lapack_Libraries LIBRARIES _prefix _name _flags _list _blas _threads)
+# This macro checks for the existence of the combination of fortran libraries
+# given by _list.  If the combination is found, this macro checks (using the
+# Check_Fortran_Function_Exists macro) whether can link against that library
+# combination using the name of a routine given by _name using the linker
+# flags given by _flags.  If the combination of libraries is found and passes
+# the link test, LIBRARIES is set to the list of complete library paths that
+# have been found.  Otherwise, LIBRARIES is set to FALSE.
+
+# N.B. _prefix is the prefix applied to the names of all cached variables that
+# are generated internally and marked advanced by this macro.
+
+set(_libraries_work TRUE)
+set(${LIBRARIES})
+set(_combined_name)
+if (NOT _libdir)
+  if (WIN32)
+    set(_libdir ENV LIB)
+  elseif (APPLE)
+    set(_libdir /usr/local/lib /usr/lib /usr/local/lib64 /usr/lib64 ENV DYLD_LIBRARY_PATH)
+  else ()
+    set(_libdir /usr/local/lib /usr/lib /usr/local/lib64 /usr/lib64 ENV LD_LIBRARY_PATH)
+  endif ()
+endif ()
+foreach(_library ${_list})
+  set(_combined_name ${_combined_name}_${_library})
+
+  if(_libraries_work)
+    if (BLA_STATIC)
+      if (WIN32)
+        set(CMAKE_FIND_LIBRARY_SUFFIXES .lib ${CMAKE_FIND_LIBRARY_SUFFIXES})
+      endif ( WIN32 )
+      if (APPLE)
+        set(CMAKE_FIND_LIBRARY_SUFFIXES .lib ${CMAKE_FIND_LIBRARY_SUFFIXES})
+      else (APPLE)
+        set(CMAKE_FIND_LIBRARY_SUFFIXES .a ${CMAKE_FIND_LIBRARY_SUFFIXES})
+      endif (APPLE)
+    else (BLA_STATIC)
+			if (CMAKE_SYSTEM_NAME STREQUAL "Linux")
+        # for ubuntu's libblas3gf and liblapack3gf packages
+        set(CMAKE_FIND_LIBRARY_SUFFIXES ${CMAKE_FIND_LIBRARY_SUFFIXES} .so.3gf)
+      endif ()
+    endif (BLA_STATIC)
+    find_library(${_prefix}_${_library}_LIBRARY
+      NAMES ${_library}
+      PATHS ${_libdir}
+      )
+    mark_as_advanced(${_prefix}_${_library}_LIBRARY)
+    set(${LIBRARIES} ${${LIBRARIES}} ${${_prefix}_${_library}_LIBRARY})
+    set(_libraries_work ${${_prefix}_${_library}_LIBRARY})
+  endif(_libraries_work)
+endforeach(_library ${_list})
+
+if(_libraries_work)
+  # Test this combination of libraries.
+  if(UNIX AND BLA_STATIC)
+    set(CMAKE_REQUIRED_LIBRARIES ${_flags} "-Wl,--start-group" ${${LIBRARIES}} ${_blas} "-Wl,--end-group" ${_threads})
+  else(UNIX AND BLA_STATIC)
+    set(CMAKE_REQUIRED_LIBRARIES ${_flags} ${${LIBRARIES}} ${_blas} ${_threads})
+  endif(UNIX AND BLA_STATIC)
+#  message("DEBUG: CMAKE_REQUIRED_LIBRARIES = ${CMAKE_REQUIRED_LIBRARIES}")
+  if (NOT _LANGUAGES_ MATCHES Fortran)
+    check_function_exists("${_name}_" ${_prefix}${_combined_name}_WORKS)
+  else (NOT _LANGUAGES_ MATCHES Fortran)
+    check_fortran_function_exists(${_name} ${_prefix}${_combined_name}_WORKS)
+  endif (NOT _LANGUAGES_ MATCHES Fortran)
+  set(CMAKE_REQUIRED_LIBRARIES)
+  mark_as_advanced(${_prefix}${_combined_name}_WORKS)
+  set(_libraries_work ${${_prefix}${_combined_name}_WORKS})
+  #message("DEBUG: ${LIBRARIES} = ${${LIBRARIES}}")
+endif(_libraries_work)
+
+ if(_libraries_work)
+   set(${LIBRARIES} ${${LIBRARIES}} ${_blas} ${_threads})
+ else(_libraries_work)
+    set(${LIBRARIES} FALSE)
+ endif(_libraries_work)
+
+endmacro(Check_Lapack_Libraries)
+
+
+set(LAPACK_LINKER_FLAGS)
+set(LAPACK_LIBRARIES)
+set(LAPACK95_LIBRARIES)
+
+
+if(LAPACK_FIND_QUIETLY OR NOT LAPACK_FIND_REQUIRED)
+  find_package(BLAS)
+else(LAPACK_FIND_QUIETLY OR NOT LAPACK_FIND_REQUIRED)
+  find_package(BLAS REQUIRED)
+endif(LAPACK_FIND_QUIETLY OR NOT LAPACK_FIND_REQUIRED)
+
+
+if(BLAS_FOUND)
+  set(LAPACK_LINKER_FLAGS ${BLAS_LINKER_FLAGS})
+  if ($ENV{BLA_VENDOR} MATCHES ".+")
+    set(BLA_VENDOR $ENV{BLA_VENDOR})
+  else ($ENV{BLA_VENDOR} MATCHES ".+")
+    if(NOT BLA_VENDOR)
+      set(BLA_VENDOR "All")
+    endif(NOT BLA_VENDOR)
+  endif ($ENV{BLA_VENDOR} MATCHES ".+")
+
+if (BLA_VENDOR STREQUAL "Goto" OR BLA_VENDOR STREQUAL "All")
+ if(NOT LAPACK_LIBRARIES)
+  check_lapack_libraries(
+  LAPACK_LIBRARIES
+  LAPACK
+  cheev
+  ""
+  "goto2"
+  "${BLAS_LIBRARIES}"
+  ""
+  )
+ endif(NOT LAPACK_LIBRARIES)
+endif (BLA_VENDOR STREQUAL "Goto" OR BLA_VENDOR STREQUAL "All")
+
+
+#acml lapack
+ if (BLA_VENDOR MATCHES "ACML.*" OR BLA_VENDOR STREQUAL "All")
+   if (BLAS_LIBRARIES MATCHES ".+acml.+")
+     set (LAPACK_LIBRARIES ${BLAS_LIBRARIES})
+   endif ()
+ endif ()
+
+# Apple LAPACK library?
+if (BLA_VENDOR STREQUAL "Apple" OR BLA_VENDOR STREQUAL "All")
+ if(NOT LAPACK_LIBRARIES)
+  check_lapack_libraries(
+  LAPACK_LIBRARIES
+  LAPACK
+  cheev
+  ""
+  "Accelerate"
+  "${BLAS_LIBRARIES}"
+  ""
+  )
+ endif(NOT LAPACK_LIBRARIES)
+endif (BLA_VENDOR STREQUAL "Apple" OR BLA_VENDOR STREQUAL "All")
+if (BLA_VENDOR STREQUAL "NAS" OR BLA_VENDOR STREQUAL "All")
+  if ( NOT LAPACK_LIBRARIES )
+    check_lapack_libraries(
+    LAPACK_LIBRARIES
+    LAPACK
+    cheev
+    ""
+    "vecLib"
+    "${BLAS_LIBRARIES}"
+    ""
+    )
+  endif ( NOT LAPACK_LIBRARIES )
+endif (BLA_VENDOR STREQUAL "NAS" OR BLA_VENDOR STREQUAL "All")
+# Generic LAPACK library?
+if (BLA_VENDOR STREQUAL "Generic" OR
+    BLA_VENDOR STREQUAL "ATLAS" OR
+    BLA_VENDOR STREQUAL "All")
+  if ( NOT LAPACK_LIBRARIES )
+    check_lapack_libraries(
+    LAPACK_LIBRARIES
+    LAPACK
+    cheev
+    ""
+    "lapack"
+    "${BLAS_LIBRARIES}"
+    ""
+    )
+  endif ( NOT LAPACK_LIBRARIES )
+endif ()
+#intel lapack
+ if (BLA_VENDOR MATCHES "Intel*" OR BLA_VENDOR STREQUAL "All")
+  if (_LANGUAGES_ MATCHES C OR _LANGUAGES_ MATCHES CXX)
+   if(LAPACK_FIND_QUIETLY OR NOT LAPACK_FIND_REQUIRED)
+      find_PACKAGE(Threads)
+   else(LAPACK_FIND_QUIETLY OR NOT LAPACK_FIND_REQUIRED)
+       find_package(Threads REQUIRED)
+   endif(LAPACK_FIND_QUIETLY OR NOT LAPACK_FIND_REQUIRED)
+   if (BLA_F95)
+    if(NOT LAPACK95_LIBRARIES)
+     check_lapack_libraries(
+     LAPACK95_LIBRARIES
+     LAPACK
+     cheev
+     ""
+     "mkl_lapack95"
+     "${BLAS95_LIBRARIES}"
+     "${CMAKE_THREAD_LIBS_INIT}"
+     )
+    endif(NOT LAPACK95_LIBRARIES)
+   else(BLA_F95)
+    if(NOT LAPACK_LIBRARIES)
+     check_lapack_libraries(
+     LAPACK_LIBRARIES
+     LAPACK
+     cheev
+     ""
+     "mkl_lapack"
+     "${BLAS_LIBRARIES}"
+     "${CMAKE_THREAD_LIBS_INIT}"
+     )
+    endif(NOT LAPACK_LIBRARIES)
+   endif(BLA_F95)
+  endif (_LANGUAGES_ MATCHES C OR _LANGUAGES_ MATCHES CXX)
+ endif(BLA_VENDOR MATCHES "Intel*" OR BLA_VENDOR STREQUAL "All")
+else(BLAS_FOUND)
+  message(STATUS "LAPACK requires BLAS")
+endif(BLAS_FOUND)
+
+if(BLA_F95)
+ if(LAPACK95_LIBRARIES)
+  set(LAPACK95_FOUND TRUE)
+ else(LAPACK95_LIBRARIES)
+  set(LAPACK95_FOUND FALSE)
+ endif(LAPACK95_LIBRARIES)
+ if(NOT LAPACK_FIND_QUIETLY)
+  if(LAPACK95_FOUND)
+    message(STATUS "A library with LAPACK95 API found.")
+  else(LAPACK95_FOUND)
+    if(LAPACK_FIND_REQUIRED)
+      message(FATAL_ERROR
+      "A required library with LAPACK95 API not found. Please specify library location."
+      )
+    else(LAPACK_FIND_REQUIRED)
+      message(STATUS
+      "A library with LAPACK95 API not found. Please specify library location."
+      )
+    endif(LAPACK_FIND_REQUIRED)
+  endif(LAPACK95_FOUND)
+ endif(NOT LAPACK_FIND_QUIETLY)
+ set(LAPACK_FOUND "${LAPACK95_FOUND}")
+ set(LAPACK_LIBRARIES "${LAPACK95_LIBRARIES}")
+else(BLA_F95)
+ if(LAPACK_LIBRARIES)
+  set(LAPACK_FOUND TRUE)
+ else(LAPACK_LIBRARIES)
+  set(LAPACK_FOUND FALSE)
+ endif(LAPACK_LIBRARIES)
+
+ if(NOT LAPACK_FIND_QUIETLY)
+  if(LAPACK_FOUND)
+    message(STATUS "A library with LAPACK API found.")
+  else(LAPACK_FOUND)
+    if(LAPACK_FIND_REQUIRED)
+      message(FATAL_ERROR
+      "A required library with LAPACK API not found. Please specify library location."
+      )
+    else(LAPACK_FIND_REQUIRED)
+      message(STATUS
+      "A library with LAPACK API not found. Please specify library location."
+      )
+    endif(LAPACK_FIND_REQUIRED)
+  endif(LAPACK_FOUND)
+ endif(NOT LAPACK_FIND_QUIETLY)
+endif(BLA_F95)
+
+set(CMAKE_FIND_LIBRARY_SUFFIXES ${_lapack_ORIG_CMAKE_FIND_LIBRARY_SUFFIXES})

cmake/Scripts/WriteVerSHA.cmake

@@ -56,6 +56,7 @@ file (WRITE "${PROJECT_BINARY_DIR}/project-version.tmp"
       "#define PROJECT_VERSION_NAME \"${PROJECT_LABEL}\"\n"
       "#define PROJECT_VERSION_HASH \"${sha1}\"\n"
       "#define PROJECT_VERSION \"${PROJECT_LABEL} (${sha1})\"\n"
+      "#define BUILD_TIMESTAMP \"${build_timestamp}\"\n"
       "#endif // OPM_GENERATED_OPM_VERSION_HEADER_INCLUDED\n"
       )
 
@@ -65,11 +66,3 @@ file (WRITE "${PROJECT_BINARY_DIR}/project-version.tmp"
 execute_process (COMMAND
   ${CMAKE_COMMAND} -E copy_if_different "${PROJECT_BINARY_DIR}/project-version.tmp" "${PROJECT_BINARY_DIR}/project-version.h"
   )
-
-# Write header file with build timestamp
-file (WRITE "${PROJECT_BINARY_DIR}/project-timestamp.h"
-      "#ifndef OPM_GENERATED_OPM_TIMESTAMP_HEADER_INCLUDED\n"
-      "#define OPM_GENERATED_OPM_TIMESTAMP_HEADER_INCLUDED\n"
-      "#define BUILD_TIMESTAMP \"${build_timestamp}\"\n"
-      "#endif // OPM_GENERATED_OPM_TIMESTAMP_HEADER_INCLUDED\n"
-      )

cmake/Templates/Doxyfile

@@ -816,7 +816,7 @@ HTML_COLORSTYLE_GAMMA  = 80
 # page will contain the date and time when the page was generated. Setting
 # this to NO can help when comparing the output of multiple runs.
 
-HTML_TIMESTAMP         = NO
+HTML_TIMESTAMP         = YES
 
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the

cmake/Templates/opm-project-config.cmake.in

@@ -58,7 +58,6 @@ if(NOT @opm-project_NAME@_FOUND)
     string(REPLACE ${@opm-project_NAME@_PREFIX} ${DEST_PREFIX} @opm-project_NAME@_INCLUDE_DIRS "${@opm-project_NAME@_INCLUDE_DIRS}")
     string(REPLACE ${@opm-project_NAME@_PREFIX} ${DEST_PREFIX} @opm-project_NAME@_LIBRARY_DIRS "${@opm-project_NAME@_LIBRARY_DIRS}")
     string(REPLACE ${@opm-project_NAME@_PREFIX} ${DEST_PREFIX} @opm-project_NAME@_LIBRARY      "${@opm-project_NAME@_LIBRARY}")
-    string(REPLACE ${@opm-project_NAME@_PREFIX} ${DEST_PREFIX} @opm-project_NAME@_PYTHON_COMMON_DIR "${@opm-project_NAME@_PYTHON_COMMON_DIR}")
   endif()
 
 
@@ -94,39 +93,17 @@ if(NOT @opm-project_NAME@_FOUND)
 
   # this is the contents of config.h as far as our probes can tell:
 
-  # Require correct CMake standard. Needed for user modules as
-  # some software will add incompatible compile switches like
-  # -std=gnu++11 otherwise when search for (I guess because of
-  # imported targets using INTERFACE_COMPILE_FEATURES), and will
-  # break compilation because of missing c++17 features.
-  if(NOT CMAKE_CXX_STANDARD)
-    set(CMAKE_CXX_STANDARD @CMAKE_CXX_STANDARD@)
-    set(CMAKE_CXX_STANDARD_REQUIRED ON)
-    set(CMAKE_CXX_EXTENSIONS OFF)
-  endif()
 
   # The settings in this block do not mix well with the DEST_PREFIX
   # setting.
   if (NOT DEST_PREFIX)
-    # if this file is not processed using the OPM CMake system but
-    # simply by a call to find_package(module) then the CMAKE_MODULE_PATH
-    # might not include the location of the OPM cmake module yet.
-    # Hence we search for opm-common using config mode to set it up.
-    # The check for opm-common_PREFIX is there to not do this in
-    # opm-common-config.cmake
-    if(NOT opm-common_PREFIX
-        AND NOT opm-common_FOUND)
-      # This needed to find the path to the CMake modules
-      find_package(opm-common CONFIG)
-    endif()
-    # This is required to include OpmPackage /opm-common-prereq.cmake
+    # This is required to include OpmPackage
     set(CMAKE_MODULE_PATH "${CMAKE_MODULE_PATH}" @PREREQ_LOCATION@)
 
     # extra code from variable OPM_PROJECT_EXTRA_CODE
     @OPM_PROJECT_EXTRA_CODE@
     # end extra code
 
-    include(OpmPackage)
     include(@opm-project_NAME@-prereqs)
   endif()
 endif()

cmake/Templates/opm-project.pc.in

@@ -9,6 +9,5 @@ Name: @name@
 Description: @description@ @major@.@minor@
 Version: @major@.@minor@
 URL: http://opm-project.org
-Libs.private: @libs@
-Libs: @target@
+Libs: @target@ @libs@
 Cflags: @includes@ @defs@

cmake/Templates/style.css

@@ -1,4 +1,4 @@
-/* Userspecific CSS for doxygen */
+/* Userspesific CSS for doxygen */
 body, table, div, p, dl {
 	font-family: Lucida Grande, Verdana, Geneva, Arial, sans-serif;
 	font-size: 16px;

debian/changelog

@@ -0,0 +1,5 @@
+opm-common (2020.04-rc4-1~xenial) xenial; urgency=medium
+
+  * New release
+
+ -- Arne Morten Kvarving <arne.morten.kvarving@sintef.no>  Mon, 19 Oct 2015 10:49:00 +0200

debian/compat

@@ -0,0 +1 @@
+9

debian/control

@@ -0,0 +1,64 @@
+Source: opm-common
+Priority: extra
+Maintainer: Arne Morten Kvarving <arne.morten.kvarving@sintef.no>
+Build-Depends: build-essential, debhelper (>= 9),
+               pkg-config, cmake, git, libtool, doxygen, graphviz,
+               texlive-latex-extra, texlive-latex-recommended,
+               ghostscript, libboost-system-dev, libboost-test-dev,
+               zlib1g-dev, libpython3-dev, python3-numpy, python3-distutils,
+               python3-setuptools, python3-setuptools-scm, python3-pytest-runner,
+               python3-decorator
+Standards-Version: 3.9.2
+Section: libs
+Homepage: http://opm-project.org
+Vcs-Git: git://github.com/OPM/opm-common.git
+Vcs-Browser: https://github.com/OPM/opm-common
+
+Package: libopm-common1
+Section: libs
+Pre-Depends: ${misc:Pre-Depends}
+Architecture: any
+Multi-Arch: same
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Provides: libopm-common
+Description: OPM common library
+ The OPM common library contains generic code shared across all OPM modules.
+
+Package: libopm-common1-bin
+Section: libs
+Pre-Depends: ${misc:Pre-Depends}
+Architecture: any
+Multi-Arch: same
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Provides: libopm-common-bin
+Description: OPM common binaries
+ The OPM common binaries.
+
+Package: libopm-common1-dev
+Section: libdevel
+Architecture: any
+Multi-Arch: foreign
+Provides: libopm-common-dev
+Suggests: libopm-common1-doc
+Depends: libopm-common1 (= ${binary:Version})
+Description: OPM common library -- development files
+ The OPM common library contains the shared buildsystem
+ and helpers shared across all OPM modules.
+
+Package: libopm-common1-doc
+Section: doc
+Architecture: all
+Multi-Arch: foreign
+Provides: libopm-common-doc
+Description: OPM common library -- documentation
+ The OPM common library contains the shared buildsystem
+ and helpers shared across all OPM modules.
+
+Package: python3-opm-common
+Section: libs
+Pre-Depends: ${misc:Pre-Depends}
+Architecture: any
+Multi-Arch: same
+Depends: ${shlibs:Depends}, ${misc:Depends}, libopm-common1, python3-numpy, python3-decorator
+Description: OPM common python bindings
+  Python package for opm-common

debian/copyright

@@ -0,0 +1,13 @@
+License: GPL-3+
+ This package is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This package is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>

debian/docs

@@ -0,0 +1,2 @@
+LICENSE
+README.md

debian/libopm-common1-bin.install

@@ -0,0 +1 @@
+usr/bin/*

debian/libopm-common1-dev.install

@@ -0,0 +1,6 @@
+usr/include/*
+usr/lib/dunecontrol/*
+usr/lib/*/pkgconfig/*
+usr/share/cmake/*
+usr/share/opm/*
+usr/lib/*/lib*.so

debian/libopm-common1-doc.install

@@ -0,0 +1 @@
+usr/share/doc/*

debian/libopm-common1.install

@@ -0,0 +1 @@
+usr/lib/*/lib*.so.*

debian/python3-opm-common.install

@@ -0,0 +1 @@
+usr/lib/python*/*

debian/rules

@@ -0,0 +1,29 @@
+#!/usr/bin/make -f
+# -*- makefile -*-
+# Sample debian/rules that uses debhelper.
+# This file was originally written by Joey Hess and Craig Small.
+# As a special exception, when this file is copied by dh-make into a
+# dh-make output file, you may use that output file without restriction.
+# This special exception was added by Craig Small in version 0.37 of dh-make.
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+%:
+	dh $@ --parallel
+
+override_dh_auto_clean:
+	dh_auto_clean --buildsystem=cmake
+
+override_dh_auto_build:
+	dh_auto_build --buildsystem=cmake
+
+# consider using -DUSE_VERSIONED_DIR=ON if backporting
+override_dh_auto_configure:
+	dh_auto_configure --buildsystem=cmake -- -DCMAKE_BUILD_TYPE=RelWithDebInfo -DSTRIP_DEBUGGING_SYMBOLS=ON -DBUILD_SHARED_LIBS=1 -DCMAKE_INSTALL_DOCDIR=share/doc/libopm-common1 -DWHOLE_PROG_OPTIM=ON -DUSE_RUNPATH=OFF -DWITH_NATIVE=OFF -DOPM_ENABLE_PYTHON=1 -DOPM_INSTALL_PYTHON=1 -DPYTHON_EXECUTABLE=/usr/bin/python3
+
+override_dh_auto_install:
+	dh_auto_install -- install-html
+
+override_dh_installdocs:
+	dh_installdocs --link-doc=libopm-common1

debian/source/format

@@ -0,0 +1 @@
+1.0

docs/keywords.txt

@@ -153,7 +153,7 @@ we currently have five different categories:
 
      To infer the number of records in the keyword based on an
      internal calculation is not supported, hence for these keywords
-     size is given as unknown, and the keywords are terminated when the
+     size is given as unkown, and the keywords are terminated when the
      next valid keyword is found:
 
         {"name" : "VFPPROD" , "size" : "UNKNOWN", ....
@@ -297,7 +297,7 @@ composite units based on the dimension of the composite quantity. As a
 consequence the list of dimensions supported by the parser is long,
 and growing. The current list can be found in the source file:
 
-   opm/input/eclipse/Units/UnitSystem.cpp
+   opm/parser/eclipse/Units/UnitSystem.cpp
 
 
 

docs/man1/arraylist.1

@@ -1,11 +0,0 @@
-.TH SUMMARY "1" "October 2022" "arraylist 2022.10" "User Commands"
-.SH NAME
-summary \- Printer for list of arrays in Eclipse summary files
-.SH DESCRIPTION
-List all arrays found in an EclFile specified on the command line.
-.PP
-.SH OPTIONS
-\fB\-h\fR Print help and exit.
-.TP
-\fB\-r\fR List array for a specific report time step number. Option only valid for a unified restart file.
-.PP

docs/man1/compareECL.1

@@ -1,66 +0,0 @@
-.TH COMPAREECL "1" "October 2022" "compareECL 2022.10" "User Commands"
-.SH NAME
-compareECL \- Comparator for Eclipse files
-.SH DESCRIPTION
-compareECL compares ECLIPSE files (restart (.RST), unified restart (.UNRST), initial (.INIT), summary (.SMRY), unified summary (.UNSMRY) or .RFT) and gridsizes (from .EGRID or .GRID file) from two simulations.
-The program takes four arguments:
-.PP
-1. Case number 1, reference case (full path without extension)
-2. Case number 2, test case (full path without extension)
-3. Absolute tolerance
-4. Relative tolerance (between 0 and 1)
-.PP
-.SH OPTIONS
-.HP
-In addition, the program takes these options (which must be given before the arguments):
-.PP
-\fB\-a\fR Run a full analysis of errors.
-.TP
-\fB\-h\fR Print help and exit.
-.TP
-\fB\-d\fR Use report steps only when comparing results from summary files.
-.TP
-\fB\-i\fR Execute integration test (regression test is default).
-.IP
-The integration test compares SGAS, SWAT and PRESSURE in unified restart files, and WOPR, WGPR, WWPR and WBHP (all wells) in summary file.
-.PP
-\fB\-k\fR Specify specific keyword to compare (capitalized), for examples \fB\-k\fR PRESSURE or \fB\-k\fR WOPR:A\-1H
-.TP
-\fB\-l\fR Only do comparison for the last Report Step. This option is only valid for restart files.
-.TP
-\fB\-n\fR Do not throw on errors.
-.TP
-\fB\-p\fR Print keywords in both cases and exit.
-.TP
-\fB\-r\fR compare a specific report time step number in a restart file.
-.TP
-\fB\-t\fR Specify ECLIPSE filetype to compare, (default behaviour is that all files are compared if found). Different possible arguments are:
-.IP
-\fB\-t\fR UNRST
-Compare two unified restart files (.UNRST). This the default value, so it is the same as not passing option \fB\-t\fR.
-.IP
-\fB\-t\fR EGRID
-Compare two EGrid files (.EGRID).
-.IP
-\fB\-t\fR INIT
-Compare two initial files (.INIT).
-.IP
-\fB\-t\fR RFT
-Compare two RFT files (.RFT).
-.IP
-\fB\-t\fR SMRY
-Compare two cases consistent of (unified) summary files.
-.IP
-\fB\-t\fR RSM
-Compare RSM file against a summary file.
-.PP
-\fB\-x\fR Allow extra keywords in case number 2. These additional keywords (not found in case number1) will be ignored in the comparison.
-.PP
-.SH Example usage of the program:
-.PP
-compareECL \fB\-k\fR PRESSURE <path to first casefile> <path to second casefile> 1e\-3 1e\-5
-compareECL \fB\-t\fR INIT \fB\-k\fR PORO <path to first casefile> <path to second casefile> 1e\-3 1e\-5
-compareECL \fB\-i\fR <path to first casefile> <path to second casefile> 0.01 1e\-6
-.PP
-Exceptions are thrown (and hence program exits) when deviations are larger than the specified tolerances, or when the number of cells does not match \fB\-\-\fR either in the grid file or for a specific keyword. Information about the keyword, keyword occurrence (zero based) and cell coordinate is printed when an exception is thrown. For more information about how the cases are compared, see the documentation of the EclFilesComparator class.
-

docs/man1/convertECL.1

@@ -1,18 +0,0 @@
-.TH CONVERTECL "1" "October 2022" "convertECL 2022.10" "User Commands"
-.SH NAME
-convertECL \- Converter for Eclipse files (binary <-> formatted format)
-.SH DESCRIPTION
-convertECL needs one argument which is the input file to be converted. If this is a binary file the output file will be formatted. If the input file is formatted the output will be binary.
-.PP
-In addition, the program takes these options (which must be given before the arguments):
-.PP
-.SH OPTIONS
-.HP
-\fB\-h\fR Print help and exit.
-.TP
-\fB\-l\fR list report step numbers in the selected restart file.
-.TP
-\fB\-i\fR Enforce IX standard on output file.
-.TP
-\fB\-r\fR extract and convert a specific report time step number from a unified restart file.
-.PP

docs/man1/opmhash.1

@@ -1,49 +0,0 @@
-.TH OPMHASH "1" "October 2022" "opmhash 2022.10" "User Commands"
-.SH NAME
-opmhash \- Hasher for summary keywords in Eclipse files
-.SH DESCRIPTION
-opmhash: invalid option \fB\-\-\fR 'h'
-The purpose of the opmhash program is to load a deck and create a summary, by
-diffing two such summaries it is simple to determine if two decks are similar.
-For each keyword a hash of the normalized content is calculated. The output of
-the program will look like this:
-.TP
-RUNSPEC
-: 13167205945009276792
-.TP
-TITLE
-: 16047371705964514902
-.TP
-DIMENS
-: 1264233216877515756
-.TP
-NONNC
-: 10052807539267647959
-.TP
-OIL
-: 6013609912232720008
-.TP
-WATER
-: 14106203893673265964
-.TP
-Total
-: 7362809723723482303
-.PP
-Where the 'random' integer following each keyword is the hash of the content of
-that keyword. The hashing is insensitive to changes in white\-space and comments
-and file location. At the bottom comes a total hash of the complete content. The
-hash of each keyword is insensitive to shuffling of keywords, but the total hash
-depends on the keyword order.
-.SH OPTIONS
-.HP
-\fB\-l\fR : Add filename and linenumber information to each keyword.
-.HP
-\fB\-s\fR : Short form \- only print the hash of the complete deck.
-.HP
-\fB\-S\fR : Silent form \- will not print any deck output.
-.PP
-It is possible to add multiple deck arguments, they are then scanned repeatedly,
-and the decks are compared. In the case of multiple deck arguments the exit
-status of the program will be zero if all are equal and nonzero in case of
-differences.
-

docs/man1/opmpack.1

@@ -1,28 +0,0 @@
-.TH OPMPACK "1" "October 2022" "opmpack 2022.10" "User Commands"
-.SH NAME
-opmpack \- Validator and printer of deck in Eclipse files without comments
-.SH DESCRIPTION
-The opmpack program will load a deck, resolve all include
-files and then print it out again on stdout. All comments
-will be stripped and the value types will be validated.
-.PP
-By passing the option \fB\-o\fR you can redirect the output to a file
-or a directory.
-.PP
-Print on stdout:
-.TP
-opmpack
-\fI\,/path/to/case/CASE.DATA\/\fP
-.PP
-Print MY_CASE.DATA in /tmp:
-.IP
-opmpack \fB\-o\fR \fI\,/tmp\/\fP /path/to/MY_CASE.DATA
-.PP
-Print NEW_CASE in cwd:
-.IP
-opmpack \fB\-o\fR NEW_CASE.DATA path/to/MY_CASE.DATA
-.PP
-As an alternative to the \fB\-o\fR option you can use \fB\-c\fR; that is equivalent to \fB\-o\fR \-
-but restart and import files referred to in the deck are also copied. The \fB\-o\fR and
-\fB\-c\fR options are mutually exclusive.
-

docs/man1/rst_deck.1

@@ -1,88 +0,0 @@
-.TH RST_DECK: "1" "October 2022" "rst_deck 2022.10" "User Commands"
-.SH NAME
-rst_deck \- Convert simulation deck to a deck ready for restart
-.SH DESCRIPTION
-The rst_deck program will load a simulation deck and parameters for a restart
-and reformat the deck to become a restart deck. Before the updated deck is
-output the program will update the SOLUTION and SCHEDULE sections. All keywords
-from the SOLUTION section will be cleared out(1) and a RESTART keyword will be
-inserted. In the SCHEDULE section the program can either remove all keywords up
-until the restart date, or alternatively insert SKIPREST immediately following
-the SCHEDULE keyword.
-.PP
-When creating the updated restart deck the program can either link to unmodified
-include files with INCLUDE statements, create a copy of deck structure in an
-alternative location or create one large file with all keywords in the same
-file. Apart from the alterations to support restart the output deck will be
-equivalent to the input deck, but formatting is not retained and comments have
-been stripped away.
-.PP
-Arguments:
-.PP
-1. The data file we are starting with.
-.PP
-2. The restart source; this can either be a basename with an optional path
-.IP
-prefix and a :N to restart from step N; alternatively you can point to an
-existing restart file. If you point to an existing restart file the input
-will be validated in several ways:
-.IP
-a) Unified/multiple files will be checked against the UNIFIN setting of
-.IP
-the deck.
-.IP
-b) Formatted/unformatted will be checked against the FMTIn setting of the
-.IP
-deck.
-.IP
-c) If a single file like \fI\,/path/to/case/HISTORY.X0067\/\fP is given as argument the
-.IP
-:N notation to denote report step should not be used.
-.IP
-If the restart argument is given as the path to an existing file the content
-of the RESTART keyword will be updated to contain the correct path from the
-location of the restart deck to the location of the restart file. This path
-awareness will be fooled if the restart deck is redirected from stdout to a
-path different from cwd. If the restart argument is given as an absolute
-filename the RESTART keyword will have an absolute path, if the restart
-argument is a relative path the RESTART keyword will get a relative path \-
-although an absolute path will be used if the restart file and the output
-deck have different roots. If the restart argument is given as a string not
-pointing to an existing file it will be inserted verbatim in the restart
-deck.
-.IP
-A restart step value of 0 is interpreted as a dry run \- a deck which has not
-been set up for restart will be written out.
-.PP
-3. Basename of the restart deck we create, can optionally contain a path prefix;
-.IP
-the path will be created if it does not already exist. This argument is
-optional, if it is not provided the program will dump a restart deck on
-stdout. If the argument corresponds to an existing directory the restart case
-will get the same name as the base case.
-.SH OPTIONS
-\fB\-s\fR: Manipulate the SCHEDULE section by inserting a SKIPREST keyword immediately
-.IP
-following the SCHEDULE keyword. If the \fB\-s\fR option is not used the SCHEDULE
-section will be modified by removing all keywords until we reach the restart
-date.
-.PP
-\fB\-m\fR: [share|inline|copy] The restart deck can reuse the unmodified include files
-.IP
-from the base case, this is mode 'share' and is the default. With mode
-\&'inline' the restart deck will be one long file and with mode 'copy' the
-file structure of the base case will be retained. The default if no \fB\-m\fR
-option is given is the 'share' mode.
-.IP
-In the case of 'share' and 'copy' the correct path to include files will be
-negotiated based on the path given to the output case in the third argument.
-If the restart deck is passed to stdout the include files will be resolved
-based on output in cwd.
-.PP
-Example:
-.IP
-rst_deck \fI\,/path/to/history/HISTORY.DATA\/\fP rst/HISTORY:30 \fI\,/path/to/rst/RESTART\/\fP \fB\-s\fR
-.PP
-1: The program has a compiled list of keywords which will be retained in the
-.IP
-SOLUTION section. The current value of that list is: RPTRST

docs/man1/summary.1

@@ -1,15 +0,0 @@
-.TH SUMMARY "1" "October 2022" "summary 2022.10" "User Commands"
-.SH NAME
-summary \- Printer for summary keys in Eclipse summary files
-.SH DESCRIPTION
-summary needs a minimum of two arguments. First is smspec filename and then list of vectors
-.PP
-In addition, the program takes these options (which must be given before the arguments):
-.PP
-.SH OPTIONS
-\fB\-h\fR Print help and exit.
-.TP
-\fB\-l\fR list all summary vectors.
-.TP
-\fB\-r\fR extract data only for report steps.
-.PP

docs/tm/tm.tex

@@ -1,27 +0,0 @@
-\documentclass[a4paper,11pt]{book}
-\usepackage{verbatim}
-
-
-\newcommand{\kw}[1]{\texttt{#1}}
-\newcommand{\inlinecode}[1]{\texttt{#1}}
-\newcommand{\flow}[0]{\texttt{flow}}
-\newcommand{\eclipse}[0]{\texttt{Eclipse}}
-\newcommand{\path}[1]{\texttt{#1}}
-\newenvironment{deck}[0]{\verbatim}{\endverbatim}
-\newenvironment{code}[0]{\verbatim}{\endverbatim}
-
-\begin{document}
-
-\begin{titlepage}
-  \begin{center}
-    \Huge
-    \textbf{Technical manual}
-  \end{center}
-\end{titlepage}
-\tableofcontents
-
-\input{udq_actionx/udq}
-\input{udq_actionx/actionx}
-\input{udq_actionx/pyaction}
-
-\end{document}

docs/tm/udq_actionx/actionx.tex

@@ -1,437 +0,0 @@
-\newcommand{\actionx}{\kw{ACTIONX}}
-\chapter{Programming in the deck: \actionx}
-\label{actionx}
-The \actionx{} keyword is the most direct way to \emph{program} in the deck. The
-\actionx{} functionality consist of the \actionx{} keyword itself, with some
-metadata and a condition and then a list of keywords which are injected into the
-in-memory representation of the \kw{SCHEDULE} section at the point in time where
-the condition evaluates to true. The \actionx{} statement is evaluated at the
-end of every timestep, and if it evaluates to true the new keywords should take
-effect immediately. The \actionx{} conditions are less sophisticated than the
-expressions used in \udq{}, this implies that a common pattern is to make
-involved calculations as \udq{} expressions, and then use a simple test as
-\actionx{} condition.
-
-The \actionx{} keyword is also documented in section 12.3.6 in the \flow{}
-reference manual.
-
-\section{Structure of the \actionx{} keyword}
-\label{actionx_structure}
-The \actionx{} keyword itself consist of multiple records. The first record is
-metadata with name of the action, the number of times the action can be
-triggered and the minimum time elapsed before an action is eligible for a second
-run. The subsequent records are \emph{conditions}, all the conditions are of the
-same form
-\begin{code}
-  lhs comparison rhs
-\end{code}
-and subsequent conditions are combined with \inlinecode{AND} or \inlinecode{OR}.
-The \inlinecode{lhs} is a field, well or group quantity, in addition you can use
-time variables \kw{DAY}, \kw{MNTH} and \kw{YEAR} as left hand
-side\footnote{\eclipse{} supports a wider list of summary variables like region,
-block and aquifer quantities on both left and right hand side.}. As with the
-\udq{} variables the well and group variables are \emph{sets}, and the
-evaluation status is maintained individually for each well and group.
-
-The comparison is one of the ordinary mathematical comparison operators
-\inlinecode{>,<,=,!=, <=} and \inlinecode{>=}. Numerical comparisons are done
-with the corresponding plain C++ operators, this is in contrast to the \udq{}
-implementation where an epsilon defined in \kw{UDQPARAMS} is used in floating
-point comparisons.
-
-The \inlinecode{rhs} is a numerical scalar, or a field, well or group quantity.
-If your \inlinecode{rhs} is a well or group quantity the \inlinecode{lhs} and
-\inlinecode{rhs} must be of the same type. If you use the symbol \kw{MNTH} as
-\inlinecode{lhs} you can compare with named months, i.e. the following will
-trigger on leap days
-\begin{deck}
-ACTIONX
-  LEAP 1000 /
-  MNTH=FEB AND /
-  DAY=29 /
-/
-...
-...
-ENDACTIO
-\end{deck}
-When there is a well/group quantity as \inlinecode{lhs} the evaluation status is
-maintained individually for each well/group. The complete condition evaluates to
-true if \emph{any} of the wells/groups satisfy the condition. In the case of
-wells the wells matching the condition can subsequently be accessed with
-wellname '?' in the \kw{ACTIONX} keywords, this is a quite common pattern to
-e.g. close the well with highest watercut.
-
-If there are more conditions they must be joined with a trailing \kw{AND} or
-\kw{OR}, furthermore conditions can be grouped with paranthesis. The \actionx{}
-expressions can only contain the four arithmetic operators $+,-,*,/$ and not
-mathematical functions like $\log()$, for more advanced expressions the natural
-approach is to first define a \udq{} and then use the \udq{} symbol in the
-\actionx{}, this is illustrated in section \ref{uda}. When multiple conditions
-involving the same well set are evaluated, the list of matching wells available
-in '?' will contain all the wells from the final condition, i.e. for
-\begin{code}
- WWCT = {"OP1": 0.25, "OP2": 0.50, "OP3": 0.75}
-\end{code}
-and the action
-\begin{deck}
-ACTIONX
-  WWCT /
-  WWCT > 0.33 AND /
-  WWCT < 0.66 /
-/
-...
-ENDACTIO
-\end{deck}
-the set of wells available for further use in '?' are \emph{all} the wells
-matching the condition \inlinecode{WWCT < 0.66} i.e. OP1 and OP2 and \emph{not}
-the wells matching the combined expression \inlinecode{0.33 < WWCT < 0.66}. In
-order to select wells in a range as attempted here you will have to create an
-indicator variable with \udq{} first and then select based on that indicator -
-e.g. something like
-\begin{deck}
-UDQ
-  DEFINE WUCTR (WWCT < 0.66) * (WWCT > 0.33) /
-/
-
-ACTIONX
-  WUCTR /
-  WUCTR = 1 /
-/
-
-...
-
-ENDACTIO
-\end{deck}
-
-The \actionx{} implementation is located in
-\path{opm/input/eclipse/Schedule/Action} and all the classes are in namespace
-\inlinecode{Action::}. As with the \udq{} the input parser needs some special
-case to handle '/' and '*' as division operator and multiplier respectively, but
-that is the only code shared between the \udq{} and the \actionx{}
-implementation\footnote{It might be possible to share more code between the two,
-in particular both have an internal recursive descent parser, but both \udq{}
-and \actionx{} have so much ``personality'' that at least initially separate
-implementations was the simplest.}.
-
-The condition part of the \actionx{} keyword is internalized while the
-\kw{SCHEDULE} section is parsed, the final product is maintained in a class
-\inlinecode{Action::ActionX} which has a \inlinecode{eval()} method waiting to
-be called. The keywords in the \actionx{} block are stored in the
-\inlinecode{Action::ActionX} keyword for future use. All of the \actionx{}
-keywords are stored in a container \inlinecode{Action::Actions} which will
-eventually manage the book keeping of which actions are eligible for evaluation.
-
-\section{The structure of the \inlinecode{Schedule} implementation}
-\label{schedule_design}
-\flow{} internalizes all keywords from the input deck and passes fully baked
-datastructures to the simulator, whereas our impression is that \eclipse{} works
-more like a reservoir model interepreter, executing one keywords at a time.
-Mostly the \flow{} approach has worked out well, however for the \actionx{}
-functionality the difference in execution model is quite acute, and the nature
-of the \actionx{} keyword has had quite strong influence on the final Schedule
-implementation. Although not required for use of \actionx{} it is valuable to
-understand how the \actionx{} functionality has influenced the design of the
-Schedule class, that way you will hopefully better understand problems or bugs
-which might arise in the future.
-
-At the very first pass the \kw{SCHEDULE} section is split in \emph{blocks}, with
-one block for each report step. The blocks are implemented with the class
-\inlinecode{ScheduleBlock}. Each block has a starting time and a list of
-keywords, the keywords are maintained in the input format
-\inlinecode{DeckKeyword}. Then the entire \kw{SCHEDULE} section is internalized
-in the class \inlinecode{ScheduleDeck} which essentially contains a list of
-\inlinecode{ScheduleBlock} instances. Consider the \kw{SCHEDULE} section
-\begin{deck}
-START
-  1 'JAN' 2020 /
-
-...
-...
-
-SCHEDULE
-
-WELSPECS
-	'PROD'	'G1'	10	10	8400	'OIL' /
-	'INJ'	'G1'	1	1	8335	'GAS' /
-/
-
-COMPDAT
-	'PROD'	10	10	3	3	'OPEN'	1*	1*	0.5 /
-	'INJ'	1	1	1	1	'OPEN'	1*	1*	0.5 /
-/
-
--- End of block 0
-
-DATES
-   1 'FEB' 2020 /
-/
-
-WCONPROD
-	'PROD' 'OPEN' 'ORAT' 20000 4* 1000 /
-/
-
-WCONINJE
-	'INJ'	'GAS'	'OPEN'	'RATE'	100000 1* 9014 /
-/
-
--- End of block 1
-
-DATES
-  1 'MAR' 2020 /
-/
-
--- End of block 2
-END
-
-\end{deck}
-
-When this is internalized we get a \inlinecode{ScheduleDeck} instance with three
-\inlinecode{ScheduleBlock} values:
-
-\begin{code}
-ScheduleDeck sched_deck = [
-  ScheduleBlock {
-    start = "2020-01-01",
-    keywords = ["WELSPECS","COMPDAT"]
-  },
-  ScheduleBlock {
-    start = "2020-02-01",
-    keywords = ["WCONPROD","WCONINJE"]
-  },
-  ScheduleBlock {
-    start = "2020-03-01",
-    keywords = []
-  }
-]
-\end{code}
-
-The \inlinecode{Schedule} class has a \inlinecode{ScheduleDeck} member. The
-processed content of the \inlinecode{Schedule} class is managed in vector of
-\inlinecode{ScheduleState} instances, where one \inlinecode{ScheduleState}
-represents the complete dynamic input state at a particular report step. The
-processed \kw{SCHEDULE} code is created with the method
-\begin{code}
-  Schedule::iterateScheduleSection().
-\end{code}
-
-When \inlinecode{Schedule::iterateScheduleSection(report\_step)} is called it
-starts by clearing the vector of \inlinecode{ScheduleState} instances from
-\inlinecode{report\_step} to the end of the simulation, and then recreates those
-by treating the \inlinecode{ScheduleBlock}. The advantage of this approach is
-that the \inlinecode{Schedule::iterateScheduleSection(report\_step)} method is
-idempotent - it can be called repeatedly, from an arbitrary point in the
-timeseries.
-
-The implementation of the \actionx{} functionality is just to append the
-\actionx{} keywords in the \inlinecode{ScheduleBlock} instance corresponding to
-the current report step and then rerun the
-\inlinecode{Schedule::iterateScheduleSection()} from this report step.
-
-
-
-\section{Forward references of wells and groups}
-When a well or group is defined as an \actionx{} keyword and then
-unconditionally referenced in the deck we get a challenge at the first pass
-through the \kw{SCHEDULE} section. In the example below a new well \kw{W1} is
-defined with the \kw{WELSPECS} keyword when the action \inlinecode{NEW\_WELL}
-evaluates to true. At 1.st of January 2025 the well \kw{W1} is opened with the
-\kw{WCONPROD} keyword. The engineer making this model assumes that the
-\inlinecode{NEW\_WELL} action will evaluate to true sometime before 1.st of
-January 2025, and thereby ensure that the well is fully defined when it is
-eventually opened with \kw{WCONPROD}:
-\begin{deck}
-ACTIONX
-   'NEW_WELL/
-   WWCT OPX  > 0.75 /
-/
-
-WELSPECS
-  'W1'  'OP'  1 1 3.33  'OIL' 7*/
-/
-
-ENDACTIO
-
-TSTEP
-  10*30 /
-
-DATES
-   1 'JAN' 2025 /
-/
-
-WCONPROD
- 'W1'      'OPEN'      'ORAT'      0.000      0.000      0.000  5* /
-/
-
-TSTEP
-  10*30 /
-
-\end{deck}
-
-For \flow{} this creates problems because the entire \kw{SCHEDULE} section is
-parsed when the simulator starts, and at first pass the well \kw{W1} is unknown
-in the \kw{WCONPROD} keyword. This is ``solved'' in the following way:
-\begin{enumerate}
-\item At first pass we inspect the keywords inside the \actionx{} block and if
-  we discover \kw{WELSPECS} we store the name of the well which will be defined
-  at a later stage through \actionx{}.
-\item When we parse further on as part of the first pass and said well is
-  referenced e.g. in a \kw{WCONPROD} keyword, we verify that the well will
-  eventually appear via \actionx{} - we issue a warning and ignore the well in
-  the \kw{WCONPROD} keyword\footnote{If the well is not registered as ``will
-  appear through \actionx{}'' there will be a runtime error with unknown well
-  name when parsing \kw{WCONPROD}.}.
-\item When the \actionx{} evaluates to true the well will be properly defined,
-  and when reiterating over the Schedule keywords the \kw{WCONPROD} keyword will
-  now be properly internalized. If the \actionx{} never evaluates to true the
-  \kw{WCONPROD} keyword will never be applied, and the warning from point 2 will
-  be the only trace of this well.
-\end{enumerate}
-It should be mentioned that the functionality with forward referencing of well
-names is quite new\footnote{In January 2022}, there might be well keywords in
-the \kw{SCHEDULE} section where the implementation is not yet prepared for this.
-Furthermore the forward referencing is not at all implemented for groups. The
-relevant data structure is the member \inlinecode{Action::WGNames
-  action\_wgnames} in the \inlinecode{Schedule} class.
-
-
-\section{To enable a new keyword for \actionx}
-The keywords must be explicitly enabled to be available in an \actionx{} block,
-and enabling a new keyword requires recompiling \flow{}. The keywords available
-as \actionx{} keywords are listed in the static method
-\inlinecode{ActionX::valid\_keyword()} in
-\path{opm/input/eclipse/Schedule/Action/ActionX.cpp}. In principle it should
-just be to add the keyword to the \inlinecode{ActionX::valid\_keyword()} method
-and rebuild \flow{}, but experience has unfortunately shown that problems of
-various kinds have had a tendency to pop up when new keywords are tried out as
-\actionx{} keywords. Most commonly the problems have been in the interaction
-between the \inlinecode{Schedule} class in opm-common and the simulator - things
-have a tendency to go out of sync.
-
-
-\section{Running \actionx{} during simulation}
-The first part of the \actionx{} treatment is parsing the keyword and conditions
-and assemble a syntax tree which can be used to evaluate the conditions. This
-parsing takes place when the \kw{SCHEDULE} section is parsed for the first time.
-This takes place fully within the realms of the opm-common codebase, and is
-quite mature.
-
-When the simulation actually runs the \actionx{} behavior consists of three
-distinct parts, taking place in the simulator, in opm-common and again in the
-simulator. The simulator will manage an instance of \inlinecode{Action::State}
-which will hold on to the time of last run and the latest results for the
-various actions.
-
-\subsection{Prepare and evaluate}
-As with \udq{} the \inlinecode{SummaryState} instance is the most important
-variable to provide context to the \actionx{} evaluation, i.e. the
-\inlinecode{SummaryState} variable must be evaluated before \actionx{}. In
-addition the \udq{} variables must be evaluated and available in the
-\inlinecode{SummaryState} instance before we invoke the \actionx{}
-functionality.
-
-The evaluation of actions is called from the method \inlinecode{applyActions()}
-in \path{eclproblem.hh}. The method will evaluate which actions are eligible for
-running by inspecting the \inlinecode{Action::Actions} variable and call the
-\inlinecode{ActionX::eval()} method.
-
-\subsection{Recreate \inlinecode{Schedule}}
-When an \actionx{} has evaluated to \inlinecode{true} the simulator will call
-into the opm-common method \inlinecode{Schedule::applyAction(report\_step)}.
-That function will add the keywords from the \actionx{} keyword to the
-\inlinecode{ScheduleBlock} for the correct report step, and then reiterate
-through the \kw{SCHEDULE} section to the end of the simulation.
-
-This reiterate process will recreate all internal members in the
-\inlinecode{Schedule} class, i.e. if the simulator was holding on to a reference
-to an internal \inlinecode{Schedule} datastructure that will be invalidated.
-
-While recreating the \inlinecode{Schedule} instance there is some book keeping
-as to which datastructures need to be recalculated in the simulator as a
-consequence of the \actionx{}. That information is maintained in the data
-structure \inlinecode{Action::SimulatorUpdate} which is returned back to the
-simulator.
-
-
-\subsection{Updating simulator data structures}
-The \actionx{} implementation is in the module opm-common, whereas when the
-simulation is proceeding it is the simulator code which is clearly in control.
-If an action has evaluated to true and new keywords are injected in the Schedule
-object the complete simulator state is updated. This is complex, and many of the
-bugs in \actionx{} functionality have been in the interaction between the
-simulator and opm-common, in particular when an action has evaluated to true.
-
-An assumption permeating the simulator code is that changes to the well and
-group configuration only take place at report steps, and in between those the
-simulator ``owns'' the well and group data. Unfortunately this is no longer the
-case when \actionx{} is active, and depending on the keywords in the \actionx{}
-block we need to update the simulator data structures after \actionx{} has been
-evaluated to true. Some details of what is currently updated is decsribed below.
-This update mechanism will probably need to be continously updated in the
-future.
-
-The simulator code makes \emph{copies} of many of the objects like wells and
-connections from the \inlinecode{Schedule} class, and also assembles many
-simulator specific data structures which to a large extent consist of extracts
-of information from the internals of the \inlinecode{Schedule} object. Some of
-the interaction between the simulator and the input layer could probably be
-simplified if the simulator would call the \inlinecode{Schedule} object when
-e.g. a well or connection is needed, instead of storing references or copies to
-the \inlinecode{Schedule} objects internally.
-
-There are currently three categories of changes that can take place due to
-\actionx{}:
-
-
-\subsubsection{General changes in well status}
-\label{actionx_change_well}
-When there is well related keyword in the \actionx{} block - e.g. \kw{WELOPEN}
-to open or close a well or \kw{WCONPROD} to adjust rates, the simulator is
-required update it's internal data structures with the updated input information.
-This will be communicated by flagging all the wells which need an update in the
-\inlinecode{Action::SimulatorUpdate} instance which is passed from the
-simulator.
-
-
-\subsubsection{Changes in geo properties}
-The grid keywords are in general not permitted in the \kw{SCHEDULE} section,
-however there are a few geo multipliers like \kw{MULTZ} and \kw{MULTFLT} which
-are allowed in the \kw{SCHEDULE} section, and thereby also in \actionx{}. If one
-of these keywords are encountered in the \actionx{} block we set the flag
-\inlinecode{Action::SimulatorUpdate::tran\_update = true} to encourage the
-simulator to recalculate the transmissibilities.
-
-
-\subsubsection{WELPI}
-\label{actionx_welpi}
-The \kw{WELPI} keyword is quite complex from the outset, when it is included as
-an \actionx{} keyword it gets even more complicated. In order to support
-\kw{WELPI} in \actionx{} the simulator needs to inspect the \actionx{} keywords
-before invoking them, and if \kw{WELPI} is included the PI values must be
-assembled from the simulator and passed to the
-\inlinecode{Schedule::applyAction()}. This is implemented and works, but it is
-complex and the special treatment in order to support the combination \kw{WELPI}
-+ \actionx{} is quite considerable.
-
-
-\section{Problems in parallel}
-\label{actionx_paralle}
-The operation environment for \actionx{} is quite similar to \udq{} when it
-comes to parallel behavior - see section \ref{udq_parallel}, in addition we
-need to be aware of parallel challenges after the \actionx{} has completed. If
-the \actionx{} keyword changes the well structure there will be problems with
-with the parallel well distribution in the simulator. \emph{As of Januarry 2022
-this will fail undetected.}
-
-
-\section{\actionx{} restart output}
-As with the \udq{} keyword some of the structure and complexity of the
-\actionx{} datastructures are there primarily to enable \eclipse{} compatible
-restart. Regarding restart of \actionx{} related data:
-\begin{enumerate}
-  \item The restart output contains the result of parsing an \actionx{}
-    condition in an intermediate representation which has been reverse
-    engineered, this is complex and might not be 100\% correct.
-  \item When restarting \flow{} from an \eclipse{} formatted restart file the
-    \actionx{} conditions are reparsed based on string data in the restart file
-    and the intermediate representation mentioned in point 1 is not utilised.
-\end{enumerate}

docs/tm/udq_actionx/pyaction.tex

@@ -1,405 +0,0 @@
-\newcommand{\pyaction}{\kw{PYACTION}}
-\chapter{Programming in the deck: \pyaction{}}
-\label{pyaction}
-The \pyaction{} keyword is a \flow{} specific keyword which allows for Python
-programming in the \kw{SCHEDULE} section. The \pyaction{} keyword is inspired by
-the \actionx{} keyword, but instead of a \inlinecode{.DATA} formatted condition
-you are allowed to implement the condition with a general Python script. The
-\actionx{} keywords are very clearly separated in a condition part and an action
-part in the form of a list of keywords which are effectively injected in the
-\kw{SCHEDULE} section when the condition evaluates to true. This is not so for
-\pyaction{} where there is only one Python script which can both evaluate
-conditions and apply changes. In principle the script can run arbitrary code,
-but due to the complexity of the \kw{SCHEDULE} datamodel the ``current best''
-way to actually change the course of the simulation is through the use of an
-additional dummy \actionx{} keyword.
-
-In order to enable the \pyaction{} keyword \flow{} must be compiled with the
-\path{cmake} switches \inlinecode{-DOPM\_ENABLE\_EMBEDDED\_PYTHON=ON} and
-\inlinecode{-DOPM\_ENABLE\_PYTHON=ON}, the default is to build with these switches
-set to \inlinecode{OFF}. Before you enable \pyaction{} in your \flow{}
-installation please read carefully through section \ref{pyaction_security} for
-security implications of \pyaction{}.
-
-\section{Python - wrapping and embedding}
-Python is present in the \flow{} codebase in two different ways. For many of
-the classes in the \flow{} codebase - in particular in opm-common, there are
-\emph{Python wrappers} available. That means that you can invoke the C++
-functionality in \flow{} classes from Python - e.g. this Python script can be used to
-load a deck and print all the keywords:
-
-\begin{code}
-import sys
-from opm.io.parser import Parser
-
-input_file = sys.argv[1]
-parser = Parser()
-
-deck = parser.parse_file(input_file)
-for kw in deck:
-    print(kw.name)
-\end{code}
- 
-When used this way the Python interpreter is the main program running, and the
-\flow{} classes like \inlinecode{Opm::Parser} are loaded to extend the Python
-interpreter. This can also be flipped around, the Python interpreter can be
-\emph{embedded} in the \flow{} executable. When Python is embedded, \flow{} is
-the main program running, and with help of the embedded interpreter the \flow{}
-program can be extended with Python plugins. The \pyaction{} keyword can be
-perceived as a Python plugin. To really interact with the state of the \flow{}
-simulation the plugin needs to utilize the functionality which wraps the C++
-functionality, so for \pyaction{} both wrapping and embedding is at play.
-
-Exporting more functionality from C++ to Python in the form of new and updated
-wrappers is a quite simple and mechanical process. If you need a particular
-functionality which is already available in C++ also in Python it will probably
-be a quite limited effort for a developer who is already familiar with the code.
-
-
-\section{The \pyaction{} keyword}
-The \pyaction{} keyword is in the \kw{SCHEDULE} section like \actionx{}. The
-first record is the name of the action and a string identifier for how many
-times the action should run, then there is a path to a Python module:
-
-\begin{deck}
-PYACTION
-  PYTEST 'FIRST_TRUE' /
-  'pytest.py' /
-\end{deck}
-
-This keyword defines a \pyaction{} called \kw{PYTEST} which will run at the end
-of every timestep until the first time a \inlinecode{true} value is returned. In
-addition to \kw{FIRST\_TRUE} you can choose \kw{SINGLE} to run exactly once and
-\kw{UNLIMITED} to continue running at the end of every timestep for the entire
-simulation. The second record is the path to a file with Python code which will
-run when this \pyaction{} is invoked. The path to the module will be interpreted
-relative to the location of the \path{.DATA} file.
-
-The python module can be quite arbitrary, but it must contain a function
-\inlinecode{run} with the correct signature:
-\begin{code}
-def run(ecl_state, schedule, report_step, summary_state, actionx_callback):
-    print('Running python code in PYACTION')
-    return True
-\end{code}
-The \pyaction{} machinery is not as robust as the simulator proper: while
-loading the \kw{PYACTION} keyword \flow{} will check that the Python module
-contains syntactically valid Python code, and that it contains a
-\inlinecode{run()} function, but it will \emph{not} check the signature of the
-\inlinecode{run()} function. If the signature is wrong you will get a hard to
-diagnose runtime error.
-
-When the Python module is loaded it does so in an environment where the path to
-the \path{.DATA} file has been appended to the Python load path by manipulating
-the internal \inlinecode{sys.path} variable.
-
- 
-\subsection{The different arguments}
-The \inlinecode{run()} function will be called with exactly five arguments which
-your implementation can use. These arguments point to datastructures in the
-simulator, and is the way to interact with the state of the simulation. The five
-arguments are:
-\begin{description}
-\item[\inlinecode{ecl\_state}:] An instance of the \inlinecode{Opm::EclipseState}
-  class - this is a representation of \emph{all static properties} in the model,
-  ranging from porosity to relperm tables. The content of the
-  \inlinecode{ecl\_state} is immutable - you are not allowed to change the static
-  properties at runtime\footnote{This could certainly be interesting, but this
-  is beyond the scope of the \pyaction{} keyword.}.
-\item[\inlinecode{schedule}:] An instance of the \inlinecode{Opm::Schedule}
-  class - this is a representation of all the content from the \kw{SCHEDULE}
-  section, notably all well and group information and the timestepping. Being
-  able to change the \kw{SCHEDULE} information runtime is certainly one of the
-  main motivations for this functionality, however due to the complexity of
-  the \inlinecode{Opm::Schedule} class (section \ref{schedule_design})
-  the recommended way to actually mutate the \inlinecode{Opm::Schedule} is
-  through the use of a dummy \actionx{} keyword (section
-  \ref{pyaction_actionx}).
-\item[\inlinecode{report\_step}:] This is an integer for the report step we
-  are currently working on. Observe that the \pyaction{} is called for every
-  simulator timestep, i.e. it will typically be called multiple times with
-  the same value for the $\mathrm{report\_step}$ argument.
-\item[\inlinecode{summary\_state}:] An instance of the
-  \inlinecode{Opm::SummaryState} class, this is where the current summary
-  results of the simulator are stored. The \inlinecode{SummaryState} class has
-  methods to get hold of well, group and general variables
-  \begin{code}
-    # Print all well names
-    for well in summary_state.wells:
-        print(well)
-
-    # Assign all group names to the variable group_names
-    group_names = summary_state.groups
-
-    # Sum the oil rate from all wells.
-    sum_wopr = 0
-    for well in summary_state.wells:
-        sum_wopr += summary_state.well_var(well, 'WOPR')
-
-    # Directly fetch the FOPR from the summary_state
-    fopr = summary_state['FOPR'] 
-  \end{code}
-  The \inlinecode{summary\_state} variable can also be updated with the
-  \inlinecode{update()}, \inlinecode{update\_well\_var()} and
-  \inlinecode{update\_group\_var()} methods.
-\item[\inlinecode{actionx\_callback}:] The \inlinecode{actionx\_callback} is a
-  specialized function which is used to update the \inlinecode{Schedule} object
-  by applying the keywords from a normal \actionx{} keyword. This is described
-  in detail in section \ref{pyaction_actionx}.
-\end{description}
-
-\subsection{Holding state}
-The \pyaction{} keywords will often be invoked multiple times, a Python
-dictionary \inlinecode{state} has been injected in the module - that dictionary
-can be used to maintain state between invocations. Let us assume we want to
-detect when the field oil production starts curving down - i.e. when
-$\partial^2_{t} \mathrm{FOPR} < 0$, in order to calculate that we need to keep
-track of the timesteps and the $\mathrm{FOPR}$ as function of time - this is one
-possible implementation:
-\begin{code}
-def diff(pair1, pair2):
-    return (pair1[0] - pair2[0], pair1[1] - pair2[1])   
-
-def fopr_diff2(summary_state):
-    fopr = summary_state.get('FOPR')
-    sim_time = summary_state.get('TIME')
-    if not 'fopr' in state:
-        state['fopr'] = []
-    fopr_series = state['fopr']
-    fopr_series.append( (sim_time, fopr) )
-
-    if len(fopr_series) < 2:
-       return None
-
-    pair0 = fopr_series[-1]
-    pair1 = fopr_series[-2]
-    pair2 = fopr_series[-3]
-
-    dt1, df1 = diff(pair0, pair1)
-    dt2, df2 = diff(pair1, pair2)
-
-    return 2*(df1/dt1 - df2/dt2)/(dt1 + dt2)
-
-def run(ecl_state, schedule, report_step, summary_state, actionx_callback):
-    fopr_d2 = fopr_diff2(summary_state)
-    if not fopr_d2 is None:
-       if fopr_d2 < 0:
-           print('Hmmm - this is going the wrong way')
-       else:
-           print('All good - sky is the limit!')
-\end{code}
-
-\section{Changing the \inlinecode{Schedule} object - using a ``normal'' \actionx{}}
-\label{pyaction_actionx}
-Before reading this section you should make sure to understand the
-\inlinecode{Schedule} design described in section \ref{schedule_design}. The
-initial plan when implementing the \pyaction{} keyword was to be able to make
-function calls like
-\begin{code}
-  schedule.close_well(w1, report_step)
-  schedule.set_orat(w2, 1000, report_step)
-\end{code}
-to close a well and set the oil rate of another well. Unfortunately it proved
-very complex to get good semantics for combining such runtime changes with the
-keyword based model for \kw{SCHEDULE} section. The current recommendation is to
-apply changes to the \kw{SCHEDULE} section using callbacks to \kw{ACTIONX}
-keywords from Python code, this is illustrated in the example
-below\footnote{From a programmers point of view the solution seems very
-unsatisfactory, but it works and it plays nicely with the \kw{ACTIONX} behavior.
-If/when the underlying \inlinecode{Schedule} implementation changes there is
-nothing per se in the \pyaction{} design which inhibits use of a better
-\inlinecode{Schedule} api in the future.}.
-
-The recommended way to achieve this is to create a normal \actionx{} keyword
-which is set up to run zero times, and then explicitly invoke that from the
-Python \inlinecode{run()} function. In the example below we create an \actionx{}
-\inlinecode{CLOSEWELLS} which will close all matching wells (the wellname '?')
-\begin{deck}
-ACTIONX
-  CLOSEWELLS 0 /
-  /
-/
-
-WELOPEN
-  '?' 'CLOSE' /
-/
-
-ENDACTIO
-\end{deck}
-The \inlinecode{CLOSEWELLS} action is set up to run zero times, so the normal
-\actionx{} machinery will never run this action\footnote{The \kw{CLOSEWELL}
-action has an \emph{empty condition}, the \actionx{} keywords with empty
-condition will always evaluate as false.}. Then in the Python run function we go
-through all the wells and call the \inlinecode{CLOSEWELL} action to close those
-with \inlinecode{OPR < 1000}:
-\begin{code}
-def run(ecl_state, schedule, report_step, summary_state, actionx_callback):
-    close_wells = []
-    for well in summary_state.wells:
-        if summary_state.well_var(well, 'WOPR') < 1000:
-           close_wells.append(well)
-
-    if close_wells:
-        actionx_callback('CLOSEWELLS', close_wells)
-\end{code}
-The implementation of this is quite complex with thread of execution going from
-C++ to Python, then invoking a callback to C++ which will call
-\inlinecode{Schedule::iterateScheduleSection()}, going back to Python to
-complete the \inlinecode{run()} method before the function pointers pops back to
-C++ and continues the simulator execution\footnote{This is documented in some
-detail as code comments of \inlinecode{Schedule::applyPyAction()} in the
-\path{Schedule.cpp} file.}.
-
-
-\section{Implementing \udq{} like behavior}
-The \udq{} keyword has three different purposes - all based on defining 
-complex quantities from the current state of the simulation:
-
-\begin{enumerate}
-\item Define a complex quantity to be used in a \actionx{} condition.
-\item Define a complex quantity for reporting in the summary file.
-\item Define a quantity which can used as a control in \kw{UDA}.
-\end{enumerate}
-
-All of these can be achieved by using the \pyaction{} keyword, although for the
-two latter alternatives you must specify the \udq{} keyword in the deck first,
-but you can let the \pyaction{} implementation override the value:
-\begin{deck}
--- Observe that this UDQ will be assigned from a PYACTION keyword,
--- the value used in the ASSIGN statement below is pure dummy.
-UDQ
-  ASSIGN WUGOOD 1 /
-  ASSIGN FUGOOD 1 /
-/
-\end{deck}
-
-\subsection{Using \pyaction{} instead of \udq{} + \actionx{}}
-Towards the end of section \ref{actionx_structure} it is demonstrated how \udq{}
-and \actionx{} can be combined to implement an action in case a complicated
-condition applies. As described in section \ref{pyaction_actionx} the best way
-to actually invoke changes on the \kw{SCHEDULE} section is through the use of a
-dummy \actionx{} keyword, but \pyaction{} is very well suited to evaluate
-complex conditions. In the example below we close all wells which have
-consistently produced less than 1000 $\mathrm{m^3/day}$ for more than 60 days:
-
-\begin{code}
-wopr_limit = 1000
-time_limit = 60 * 3600 * 24
-
-def init_state(summary_state):
-    if 'closed_wells' in state:
-        return
-
-    state['closed_wells'] = set()
-    bad_wells = {}
-    for well in summary_state.wells:
-        bad_wells[well] = None
-    state['bad_wells'] = bad_wells
-
-
-def run(ecl_state, schedule, report_step, summary_state, actionx_callback):
-    shut_wells = []
-    init_state(summary_state)
-    for well in summary_state.wells:
-        if well in state['closed_wells']:
-           continue
-
-        if summary_state.well_var(well, 'WOPR') < wopr_limit:
-            elapsed = summary_state.elapsed()
-            if state['bad_wells'][well] is None:
-                state['bad_wells'][well] = elapsed
-            else:
-                bad_time = elapsed - state['bad_wells'][well]
-                if bad_time > time_limit:
-                    shut_wells.append(well)
-                    state['closed_wells'].add( well )         
-        else:
-            state['bad_wells'][well] = None
-
-    if shut_wells:
-       actionx_callback(shut_wells)
-
-\end{code}
-
-\subsection{Using \pyaction{} to report to the summary file}
-The important point when using \pyaction{} to report complex results to the
-summary file is just that the \inlinecode{summary\_state} argument to the
-\inlinecode{run()} function is \emph{writable} with \inlinecode{updata\_xxx}
-calls. Assuming dummy \udq{} variables \kw{WUGOOD} and \kw{FUGOOD} have been
-defined as per the example above, we can use \pyaction{} to set variable
-\kw{FUGOOD} to one for all wells with rate above a limit, and the \kw{FUGOOD}
-variable can be the count of such wells:
-\begin{code}
-def run(ecl_state, schedule, report_step, summary_state, actionx_callback):
-    good_count = 0
-    opr_limit = 1000
-    for wname in schedule.well_names():
-        if summary_state.well_var(wname, 'FOPR') > opr_limit:
-            good_count += 1
-            summary_state.update_well_var(wname, 'WUGOOD', 1)
-        else:
-            summary_state.update_well_var(wname, 'WUGOOD', 0)
-
-    summary_state.update_var('FUGOOD', good_count)
-\end{code}
-
-
-
-\subsection{Using \pyaction{} to set a \kw{UDA} control}
-Using \pyaction{} to set \kw{UDA} controls is quite simple. Again the \udq{}
-keyword must have been defined with a dummy value in the \kw{SCHEDULE} section,
-and the \kw{UDA} keyword used in e.g. a \kw{WCONDPROD} keyword. Then the
-\inlinecode{run()} function can just be used to assign to the \udq{} variable.
-In the example below we use a \kw{UDA} to control the oil production rate, and
-the value is set to the average value of the producing wells:
-\begin{deck}
--- Define dummy UDQ WUOPR to be used as control in the WCONPROD
--- keyword. The actual value for this UDQ is assigned in a PYACTION
--- keyword
-UDQ
-   ASSIGN WUOPR 0 /
-/
-...
-...
--- Need to define a well list with all the production wells.
--- This is to ensure that the WCONPROD keyword is only applied
--- to producers.
-WLIST
-  'PROD'  P1 P2 P3 .../
-
-WCONPROD
-   '*PROD'  'OPEN'  'ORAT'  'WUOPR' /
-/
-\end{deck}
-This can then be combined with the python code:
-\begin{code}
-def run(ecl_state, schedule, report_step, summary_state, actionx_callback):
-    num_prod_wells = 0
-    for wname in schedule.well_names():
-        if summary_state.well_var(wname, 'WOPR') > 0:
-            num_prod_wells += 1
- 
-    fopr = summary_state['FOPR']
-    new_rate = fopr / num_prod_wells
-    for wname in schedule.well_names():
-        summary_state.update_well_var(wname, 'WUOPR', new_rate)
-\end{code}
-
-
-\section{Security implications of \pyaction{}}
-\label{pyaction_security}
-The \pyaction{} keyword allows for execution of arbitrary user supplied Python
-code, with the priviliges of the user actually running \flow{}. If you have a
-setup where \flow{} runs with a different user account than the person
-submitting the simulation you should be \emph{very careful} about enabling the
-embedded Python functionality and the \pyaction{} keyword. As a scary example
-this script will wipe your disks:
-\begin{code}
-import shutil
-
-def run(ecl_state, schedule, report_step, summary_state, actionx_callback):
-    shutil.rmtree('/')
-\end{code}
-
-If the user running \flow{} has different security credentials than the user
-submits the job, this has significant security implications.

docs/tm/udq_actionx/udq.tex

@@ -1,599 +0,0 @@
-\newcommand{\udq}{\kw{UDQ}}
-\chapter{Programming in the deck: \udq{}}
-\udq{} and \kw{ACTIONX} are two keywords which offer a sort of
-\emph{programming} in the input deck. \udq{} is an acronym for \emph{User
-Defined Quantity}, and the essence of the \udq{} keyword is the ability to
-define arithmetic expressions based on the result vectors of the ongoing
-simulation. The quantites evaluated with \udq{} can then be output as summary
-variables, and they can be used as controls in keywords like \kw{WCONPROD} and
-\kw{GCONINJE}. When used as controls the \udq{} variables are called \emph{User
-Defined Arguments} (UDA).
-
-For both the \udq{} and \kw{ACTIONX} keywords evaluating an arithmetic
-expression based on the current results of the ongoing simulation is an
-important part of the concept, and they are often referenced in pair as
-\udq{}/\kw{ACTIONX}, this is slightly misleading as the two are fully
-independent and share very little both as concepts in \flow{} and in the C++
-implementation. The \kw{ACTIONX} keyword is described in chapter \ref{actionx}. 
-
-The \udq{} keyword is also documented in section 12.3.233 in the \flow{}
-reference manual.
-
-\section{Defining a new \udq{} keyword}
-New \udq{} variables are defined with the \udq{} keyword in the \kw{SCHEDULE}
-section. The \udq{} keyword is a sort of a super keyword with four additional
-subcommands: \kw{DEFINE}, \kw{ASSIGN}, \kw{UNIT} and \kw{UPDATE}. The
-\kw{DEFINE} subcommand is the most important command, that is used to
-\emph{define} an arithmetic expression for a \udq{} variable, which is evaluated
-at the end of every simulator time step. \kw{ASSIGN} is used to define a \udq{}
-variable with a constant numerical value, in addition the \kw{ASSIGN} subcommand
-is often used as a ``forward reference'' to enable using a \udq{} keyword in
-another \kw{DEFINE} expression. The \kw{UNIT} command is used to assign a unit
-string to a \udq{} variable, see section \ref{udq_units} for more details about
-\udq{} variables and units. The \kw{UPDATE ON} and \kw{UPDATE OFF} commands can
-be used to switch updating of \udq{} variables on and off. The \udq{} variables
-are created in mode \kw{ON}.
-
-All \udq{} keywords must have the letter \emph{U} as their second character, the
-first character should be 'F', 'G' or 'W' to indicate whether this is a field,
-group or well quantity\footnote{In \eclipse{} also the characters 'S', 'C', 'A'
-and 'B' are used to denote \emph{segment}, \emph{connection}  \emph{aquifer} and
-\emph{block} variables respectively. None of these are supported in \flow{}.}.
-
-The simplest way to define a \udq{} is just using the \kw{ASSIGN} subcommand of
-the \udq{} keyword:
-\begin{deck}
-UDQ
-  ASSIGN FUVAR1 123 /
-  ASSIGN FUVAR2 456 /
-/
-\end{deck}
-This way we will assign to variables \inlinecode{FUVAR1} and \inlinecode{FUVAR2}
-with values 123 and 456 respectively. These values can output to the summary
-file, be used as control values in a control keyword like \kw{WELTARG} and be
-used to recursively define another \udq{} keyword.
-
-The more interesting \udq{} subcommand is \kw{DEFINE} which is used to define an
-arithmetic expression for a \udq{} variable, the arithmetic expression will be
-evaluated at the end of every timestep. The expressions are built from the
-normal arithmetic operators +,-,*,/, a predefined set of available functions
-(see \ref{udq_functions}) and results from the ongoing simulation.
-
-In the example below we create \udq{} variables \kw{FUWCT1} and \kw{FUWCT2} as
-user defined field water cut, one based on the summary variables \kw{FWPR} and
-\kw{FOPR} and one based on summing \kw{WOPR} and \kw{WWPR} over all wells
-\begin{deck}
-UDQ
-  DEFINE FUWCT1 FWPR/(FWPR + FOPR) /
-  DEFINE FUWCT2 SUM(WWPR)/(SUM(WWPR) + SUM(WOPR)) /
-/
-\end{deck}
-
-A \udq{} variable can be redefined during the simulation, and also change from
-constant \kw{ASSIGN} to variable \kw{DEFINE}. Observe that \udq{} values are
-always evaluated in order of occurence in the input deck. For instance for this
-input
-\begin{deck}
-UDQ
-  ASSIGN FU1 100 /
-  DEFINE FU2 FU1 + FOPR /
-  DEFINE FU1 FWPR /
-/
-\end{deck}
-the evaluation order will be \{\kw{FU1}, \kw{FU2}\}\footnote{Maintaining the
-input order and whether a certain \udq{} symbol is now a \kw{ASSIGN} or
-\kw{DEFINE} keyword is also very important for the restart code.}. \kw{ASSIGN}
-statements take effect at input time, making the newly defined symbol
-immediately available for reuse in a subsequent defintion. This is utilized in
-the \udq{} keyword above where the symbol \kw{FU1} is referenced in the
-defintion of \kw{FU2}. As used in this example the \kw{ASSIGN FU1 100} can be
-seen as a \emph{forward reference}. When we have completed the first timestep
-and it is time to evalute the \udq{} expressions they will be evaluated in order
-of \emph{first appearance}, i.e. \{\kw{FU1}, \kw{FU2}\}. At this stage the
-active definition of \kw{FU1} is \inlinecode{FU1 = FWPR}, i.e. the value
-\inlinecode{100} from the initial definition \inlinecode{FU1 = 100} is never
-actually used.
-
-\section{Different types of \udq{} - field, group and well}
-The \udq{} keywords can be of different types, \flow{} supports \emph{field},
-\emph{well} and \emph{group} keywords\footnote{\eclipse{} also supports
-connection, segment and aquifer variables.}. The field keywords are scalar,
-whereas the well and group keywords are sets with values for every well/group.
-
-The type of a \udq{} keyword is inferred from the name in the same manner as the
-summary keywords, i.e. for this \udq{} keyword
-\begin{deck}
-UDQ
-  ASSIGN FU1 100 /
-  ASSIGN WU1 200 /
-  ASSIGN GU1 300 /
-/
-\end{deck}
-we will define one scalar keyword \kw{FU1}, one well set \kw{WU1} and one group
-set \kw{GU1}. The well sets will have one slot for each well in the model, it is
-not possible to create a well set with only a subset of wells, but the well set
-can have \emph{undefined} value for a subset of wells. The set maintains a
-\inlinecode{is\_defined()} status for each element and most operations only
-apply to the defined elements\footnote{The C++ implementation of the \udq{}
-value set is the equivalent of \texttt{std::map<std::string,
-  std::optional<double>>}.}.
-
-As indicated with \kw{ASSIGN WU1 200} you can assign a scalar value to a set
-keyword, then all elements in the set will have the same value. Assuming we have
-a model with wells OP1, OP2, WI and GI the \kw{WU1} will look like
-\begin{code}
-  WU1 = {"OP1": 100, "OP2": 100, "WI": 100, "GI": 100}.
-\end{code}
-When defining a well \udq{} it is natural to refer to well summary variables, in
-the example below we define \kw{WUBHP} which is the bottom hole pressure
-for each well, \kw{WUOPR1} which is the oil production rate for a subset of
-wells and \kw{WUOPR2} which is the oil production rate for well OP1 \emph{broadcasted to all wells}.
-\begin{deck}
-UDQ
-  DEFINE WUBHP  WBHP     / 
-  DEFINE WUOPR1 WOPR 'OP*' /
-  DEFINE WUOPR2 WOPR OP1 /
-/
-\end{deck}
-After evaluation these \udq{} values will be\footnote{The numerical values are
-arbitrary, just to illustrate that they are \emph{defined}, in contrast to the
-[ ] which is used to illustrate an \emph{undefined} value.}:
-\begin{code}
-  WUBHP  = {"OP1": 20, "OP2": 30, "WI": 10,  "GI": 15}
-  WUOPR1 = {"OP1": 13, "OP2": 17, "WI": [ ], "GI": [ ]}
-  WUOPR2 = {"OP1": 13, "OP2": 13, "WI": 13,  "GI": 13}
-\end{code}
-Observe how well variables like \kw{WBHP} and \kw{WOPR} can be qualified with a
-wellname pattern. If no wellname is supplied the expression will be evaluated
-for all wells, as for \kw{WUBHP}, for \kw{WUOPR1} the pattern 'OP*' will select
-wells \{OP1, OP2\} and leave the injectors \{WI, GI\} undefined. For \kw{WUOPR2}
-the well pattern 'OP1' specifies a well completely, i.e. this will be evaluated
-as a scalar, and then the scalar value \inlinecode{WOPR:OP1 == 13} is
-broadcasted to all the wells in \kw{WUOPR2}.
-
-\udq{} sets with different sets of defined wells can be combined, in most cases
-the operations will be applied to the intersection of all defined wells,
-consider for example\label{udq_diff}:
-
-\begin{deck}
-UDQ
-  DEFINE WUBHP    WBHP /
-  DEFINE WUTHP    WTHP OP* /
-  DEFINE WUPDIFF  WUBHP - WUTHP
-/
-\end{deck}
-When these \udq{} statements are evaluated we will get:
-\begin{code}
-  WUBHP   = {"OP1": 20, "OP2": 30, "WI": 10,  "GI": 15}
-  WUTHP   = {"OP1": 13, "OP2": 17, "WI": [ ], "GI": [ ]}
-  WUPDIFF = {"OP1":  7, "OP2": 13, "WI": [ ], "GI": [ ]}
-\end{code}
-As we see the undefined property for wells GI and WI in \kw{WUTHP} is contagious
-when the two expressions are combined with \inlinecode{WUPDIFF = WUBHP - WUTHP},
-see however section \ref{udq_union_functions} for a collection of functions
-which operate on the union of values.
-
-When an undefined variable is output to the summary file it will get a value
-given as item 3 of the \kw{UDQPARAM} keyword. Summary output is the \emph{only}
-point where the undefined value can be dereferenced, the numerical value given
-in \kw{UDQPARAM} will not be available either for \udq{} nor \kw{ACTIONX}
-evaluations.
-
-
-\section{Functions available in \udq{} defintions}
-\label{udq_functions}
-\flow{} supports all the \udq{} functions available in \eclipse{}, for the
-future it would be a quite simple C++ task to extend the list of available
-functions, although that will affect \eclipse{} compatibility.
-
-\subsection{Ordinary binary functions}
-The \udq{} framework supports all the ordinary arithmetic operators +,-,*,/ and
-\^{} and the comparison operators $>, \ge, <, \le, \ne, ==$. For all of these
-operations sets and scalars can be combined freely. When combining a scalar and
-a set the scalar will be promoted to a set with all values equal, i.e. for
-\begin{deck}
-UDQ
-  ASSIGN WULIMIT 100 /
-/
-\end{deck}
-the numerical value 100 will be broadcasted to all wells:
-\begin{code}
-  WULIMIT = {"OP1": 100, "OP2": 100, "WI": 100,  "GI": 100}.
-\end{code}
-
-In the case of set arguments the operations are only applied to the union of
-values which are defined in both argument sets. The comparison operators produce
-numerical 0 or 1 depending on the result of the comparison, the result from a
-comparison operation can be used numerically in further computations. In the
-following example \kw{FUWCNT} will be the number of wells producing with oil
-production rate above 1000\footnote{Remember: 1000 has the units of the
-deck, i.e. $\mathrm{stb/day}$ in FIELD units and $\mathrm{m^3/day}$ in metric
-units.}.
-\begin{deck}
-UDQ
-  DEFINE FUWCNT SUM( WOPR > 1000 ) /
-/
-\end{deck}
-
-
-
-\subsection{Functions over a set returning a scalar}
-The \udq{} framework has several functions which iterate over all the defined
-members of a set and return a scalar. In the example
-
-\begin{deck}
-UDQ
-  DEFINE FU1 SUM(WOPR 'OP*') /
-/
-\end{deck}
-The scalar variable \kw{FU1} will be equal to the sum of oil production rates
-for all wells matching the pattern \kw{OP*}, the wells with a name not matching
-\kw{OP*} will not contribute to the sum. The complete list of functions iterating
-over a set and returning a scalar are:
-
-\begin{description}
-\item[SUM] Sum all defined elements in the argument set and return a scalar.
-\item[AVEA] The arithmetic average of the elements in the set.
-\item[AVEG] The geometric average of the elements in the set.
-\item[AVEH] The harmonic average of the elements in the set.
-\item[MAX] The maximum element in the set.
-\item[MIN] The minimum element in the set.
-\item[NORM1] The $\mathrm{L^1}$ norm of the elements in the set.
-\item[NORM2] The $\mathrm{L^2}$ norm of the elements in the set.
-\item[NORMI] The $\mathrm{L^\infty}$ norm of the elements in the set.
-\item[PROD] The product of all the elements in the set.
-\end{description}
-
-
-\subsection{Elemental functions}
-There is a family of functions which take a vector or scalar as argument, run
-through  all the elements in the argument and return a result of the same shape
-as the argument, where a function has been applied to all the defined elements.
-Assume that the \kw{WU1} has the following value:
-
-\begin{code}
-  WU1 = {"OP1": -2, "OP2": -1, "WI": 1, "GI": []},
-\end{code}
-
-then \kw{DEFINE WUABS ABS(WU1)} will give
-
-\begin{code}
-  WUABS = {"OP1": 2, "OP2": 1, "WI": 1, "GI": []}.
-\end{code}
-
-The available elemental functions of this kind come in different categories:
-
-\subsubsection*{Mathematical functions}
-\begin{description}
-\item[EXP] Return a new set where all defined elements have been exponentiated.
-\item[ABS] Return a new set with the absolute value of all elements.
-\item[LN] Return a new set with the \emph{natural logarithm} of all elements.
-\item[LOG] Return a new set with $\log_{10}$ of all elements.
-\item[NINT] Return a new set where all elements have been converted to the
-  nearest integer.
-\end{description}
-
-\subsubsection*{Sorting functions}
-The \udq{} functionality supports functions \kw{SORTA} and \kw{SORTD} to sort a
-set in ascending or descending order respectively. Observe that these functions
-do not sort the sets in place - the udqset does not have any notion of ordering,
-rather they create a permutation set with values 1,2,3, ... The following
-combination of \udq{} and \kw{ACTIONX} will use the \kw{SORTD} function to close
-the two wells with the highest watercut:
-\begin{deck}
-UDQ
-  DEFINE WUWCTS SORTD(WWCT OP*) /
-/
-\end{deck}
-assuming the \kw{WWCT} looks like
-\begin{code}
-  WWCT = {"OP1": 0.5, "OP2": 0.2, "OP3": 0.1, "OP4":0.7, "WI": 0, "GI": 0}
-\end{code}
-then the \kw{WUWCTS} set will look like
-\begin{code}
-  WUWCTS = {"OP1": 2, "OP2": 3, "OP3": 4, "OP4":1 "WI": [], "GI": []}
-\end{code}
-
-When this is combined with the \kw{ACTIONX}(see chapter \ref{actionx})
-\begin{code}
-ACTIONX
-CW /
-WUWCTS <= 2 /
-/
-
-WELOPEN
-'?'  'CLOSE' /
-/
-
-ENDACTIO
-\end{code}
-the two wells with highest watercut will be selected in the \inlinecode{WUWCTS
-  <= 2} statement and that will be expanded to \{OP4, OP1\} by the '?'
-expression in the \kw{WELOPEN} keyword.
-
-
-\subsubsection*{Random functions}
-The \udq{} machinery has functionality to sample random numbers, there are one
-set of random number functions which are seeded deterministically by item 1 of
-\kw{UDQPARAMS} and an alternative set which is seeded by the clock. The random
-number functions take a \udq{} variable as argument, that is only to ensure that
-the shape of the result value is correct.
-
-\begin{description}
-\item[RANDN] Random numbers from distribution $N(0,1)$ seeded deterministically
-  by item 1 in \kw{UDQPARAMS}.
-\item[RANDU] Random numbers from distribution $U(-1,1)$ seeded deterministically
-  by item 1 in \kw{UDQPARAMS}.
-\item[RRNDN] Random numbers from distribution $N(0,1)$ seeded by the clock.
-\item[RRNDU] Random numbers from distribution $U(-1,1)$ seeded by the clock.
-\end{description}
-
-Assuming the argument vector \kw{WU1} looks like 
-\begin{code}
-  WU1 = {"OP1": -2, "OP2": [], "WI": 1, "GI": []},
-\end{code}
-the result of \kw{DEFINE WURAND RANDU(WU1)} could be like
-\begin{code}
- WURAND = {"OP1": 0.576, "OP2": [], "WI": -0.132, "GI": []}.
-\end{code}
-
-\subsubsection*{Work with defined status}
-The functions \kw{DEF}, \kw{UNDEF} and \kw{IDV} can be used to inspect the
-defined/not defined status of the elements in a \udq{} set.
-
-\begin{description}
-  \item[DEF] Return a set with value 1 for all defined elements.
-  \item[UNDEF] Return a set with value 1 for all undefined elements.
-  \item[IDV] Return a set with value 1 for all defined elements and value 0 for
-    all undefined elements.
-\end{description}
-
-Assuming the input argument
-
-\begin{code}
-  WU1 = {"OP1": -2, "OP2": [], "WI": 1, "GI": []},
-\end{code}
-
-the \udq{} assignments
-
-\begin{deck}
-UDQ
-  DEFINE WUDEF   DEF(WU1) /
-  DEFINE WUUNDEF UNDEF(WU1) /
-  DEFINE WUIDV   IDV(WU1) /
-/
-\end{deck}
-
-will produce:
-
-\begin{code}
-  WUDEF   = {"OP1": 1,  "OP2": [], "WI": 1,  "GI": []},
-  WUUNDEF = {"OP1": [], "OP2": 1,  "WI": [], "GI": 1},
-  WUIDV   = {"OP1": 1,  "OP2": 0,  "WI": 1,  "GI": 0},
-\end{code}
-
-
-
-\subsection{Union functions}
-\label{udq_union_functions}
-There are a list of functions \kw{Uxxx} which operate on the union of the values
-found in the two sets, i.e. a result is assigned if at at least one set has
-defined value for this well/group.
-\begin{description}
-\item[UADD] Will add the items from the two sets.
-\item[UMUL] Will multiply the items from the two sets.
-\item[UMAX] The maximum value from the two sets.
-\item[UMIN] The minumum value from the two sets.
-\end{description}
-In the case where only one of the sets has a defined value the operation will be
-performed \emph{as if} the function \kw{Uxxx} is the identity function.
-
-
-As an example consider the two sets:
-\begin{code}
-  WU1     = {"OP1": 1, "OP2": [], "WI": 2,  "GI": []},
-  WU2     = {"OP1": 6, "OP2": 5,  "WI": [], "GI": []},
-\end{code}
-
-and the \udq{} expression \kw{DEFINE WUUADD WU1 UADD WU2}, then the resulting
-set \kw{WUUADD} will be
-\begin{code}
-  WUUADD  = {"OP1": 7, "OP2": 5,  "WI": 2,  "GI": []}.
-\end{code}
-This in contrast to a normal $+$ which only operates on the intersection of the
-two sets, only well OP1 would have a defined value in this case.
-
-
-\section{Used as a control: UDA}
-\label{uda}
-Probably one of the most important uses of the \udq{} functionality is the
-ability to use a \udq{} as control in e.g. the \kw{WCONINJE} keyword. In the
-example below we calculate the produced liquid volume from a group of wells and
-use that as injection target for a water injector:
-
-\begin{deck}
-UDQ
-  DEFINE FULPR  (WOPR P* + WWPR P*) * 1.25 /
-/
-
-...
-...
-
-WCONINJE
-  WI  'WATER'  'OPEN'  'RATE'   'FULPR' /
-/
-\end{deck}
-
-In the following insane example we distribute the current oil production rate
-randomly among the producers and use that as target for the next timestep - do
-not try this at home:
-\begin{deck}
-UDQ
-  -- Create a 0 / 1 mask with 0 for injectors and 1 for producers.
-  DEFINE WUPROD WOPR > 0 /
-  
-  -- Create a vector of random numbers [0,1] for all producers
-  DEFINE WURAND 0.5 * (RANDU(WUPROD) + 1) * WUPROD /
-
-  -- Create a vector where all producers get a random fraction of
-  -- the current total oil production rate
-  DEFINE WUOPR FOPR * WURAND / SUM(WURAND) /
-/
-
--- Need to have a well list or similar to select all producers for 
--- the WCONPROD keyword.
-WLIST
-  'P' 'ADD' ..... /
-
-
-WCONPROD
- '*P' 'OPEN' 'ORAT'  'WUOPR' /
-/
-\end{deck}
-One point about this example is that the \udq{} variable \kw{WUOPR} which is
-used as as control in the \kw{WCONPROD} is a well set, the lookup machinery will
-automatically use the correct well index when assigning control value to a
-particular well.
-
-From an implementation point of view the \kw{UDA} functionality creates a
-significant complexity, because the actual rate to use in the simulation must be
-evaluated \emph{just in time}.
-
-\section{\udq{} units}
-\label{udq_units}
-The \udq{} subcommand \kw{UNIT} can be used to assign a string which is used as
-output unit when the \udq{} variable is output to the summary file. This is
-\emph{only} a string and does not induce any unit conversion. All \udq{}
-evaluations are in terms of the corre deck units - irrespective of the \kw{UNIT}
-subcommand. Consider the following
-\begin{deck}
-RUNSPEC
-
-FIELD
-
-...
-...
-
-SCHEDULE
-
-UDQ
-  DEFINE WUI WWIR - 100 /
-/
-\end{deck}
-
-\begin{enumerate}
-\item The simulation runs in SI units; hence the water injection rate is
-  calculated in $\mathrm{m^3/s}$.
-\item As part of the summary evaluation the \inlinecode{SummaryState} will
-  contain the water injection rate converted to field units.
-\item The \udq{} variable \kw{WUI} is evaluated as the water injection rate from
-  \inlinecode{SummaryState} subtracted numerical value 100, \emph{it is solely the users 
-  responsability that the numerical value 100 represents water injection rate in
-  field units.}
-\end{enumerate}
-
-Observe that the units are complicated, and non intuitive for \kw{UDA} values.
-The \kw{UDA} evaluation is based on the \inlinecode{SummaryState} class which is
-in deck units, the controls determined by \kw{UDA} evaluation must therefor be
-converted to SI units just when it is passed to the simulator. The initial
-design ambition was to block the deck units at the IO boundary, keeping the
-internals fully in SI. The \kw{UDA} concept is the exception which manages to
-inject deck units quite far into the code.
-
-
-\section{Implementation details}
-The significant part of the UDQ implementation is in classes located in
-\path{opm/input/eclipse/Schedule/UDQ}, in addition the restart output of
-\udq{}/\kw{UDA} values is in \path{opm/output/eclipse/AggregateUDQData.cpp}.
-Finally the \udq{} parser makes use of the type \inlinecode{RawString} to treat
-literal ``/'' and ``*'' different from ordinary parsing where ``/'' signifies
-end of line and ``*'' is either a default or part of a multiplier expression.
-
-\subsection*{\inlinecode{UDQConfig}}
-The class \inlinecode{UDQConfig} internalizes the parsing of the \udq{} keywords
-from the input deck. The \inlinecode{UDQConfig} instance is time-versioned and
-managed by the \inlinecode{ScheduleState} class. The \inlinecode{UDQConfig} is
-immutable while the simulator is executing. The \inlinecode{UDQConfig} contains
-two main classes \inlinecode{UDQDefine} and \inlinecode{UDQAssign} in addition
-to book-keeping code to keep track of what type of expression a \udq{} keyword
-is at the time. A significant part of the book-keeping is only required to be
-able to output restart files in \eclipse{} format.
-
-\subsection*{\inlinecode{UDQDefine} and \inlinecode{UDQASTNode}}
-The \inlinecode{UDQDefine} manages a parsed \udq{} expresssion along with a
-chunck of metadata. The parsed \udq{} expression is managed in an instance of
-\inlinecode{UDQASTNode}. The \inlinecode{UDQASTNode} contains a parsed tree
-representation of the \udq{} input expression. The parsing of \udq{} expressions
-happens at input time, and for the rest of the simulation the
-\inlinecode{UDQASTnode} instances are immutable.
-
-Many scalar \udq{} types are defined in the file \path{UDQEenums.hpp} and in the
-namespace \inlinecode{UDQ} there are many small utility functions to work with
-these enums.
-
-
-\subsection*{\inlinecode{SummaryState}}
-\label{summarystate}
-The \inlinecode{SummaryState} class is not part of the \udq{} implementation,
-but it is a very important class for the \udq{} functionality. At the end of
-every timestep the simulator will call the method \inlinecode{evalSummary} which
-will call into opm-common and evaluate all summary variables and store them in a
-\inlinecode{SummaryState} instance\footnote{Observe that during initialization
-the \udq{} expressions are inspected, and we make sure that all summary
-variables needed to evaulate \udq{} expressions are evaluated in the Summary
-evaluation.}. The \inlinecode{SummaryState} class manages a set of maps with
-well, group and field variables, when evaluating e.g. the \kw{WOPR} the results
-will be stored in a two level map first indexed with keyword \kw{WOPR} and then
-with well name. Afterwards the \udq{} layer can fetch values with
-\inlinecode{SummaryState::get\_well\_var()}. The values in the
-\inlinecode{SummaryState} have been converted to output units, this is important
-for the \kw{UDA} evaluation.
-
-At the end of every timestep the \inlinecode{UDQConfig::eval()} method is called
-to evaluate all the \udq{} expressions, the evaluated values will end up in the
-active \inlinecode{SummaryState} instance, i.e. for this \udq{}
-\begin{deck}
-UDQ
-  DEFINE FUOPR SUM(WOPR) /
-  DEFINE WUGWR WGPR / WWPR /
-/
-\end{deck}
-we will get \inlinecode{SummaryState} entries for \kw{FUOPR} and \kw{WUGWR} for
-\emph{all} wells in the model. These \inlinecode{SummaryState} values can then
-be output to the summary file, be used when evaluating \kw{ACTIONX} keywords or
-to evaluate \kw{UDA} control values.
-
-In addition to the \inlinecode{SummaryState} variable there is an instance of
-type \inlinecode{UDQState} which is updated runtime, the \inlinecode{UDQState}
-instance holds on to the results of \udq{} evaluations with more context than
-\inlinecode{SummaryState} and is used to output \udq{} and \kw{UDA} state to the
-restart files. While evaluating the simulator will create a \kw{UDQContext}
-variable which will manage both the \inlinecode{SummaryState},
-\inlinecode{UDQState} and also some \udq{} parameters from the \kw{RUNSPEC}
-section. The lifetime of the \kw{UDQContext} instance is only one \udq{}
-evaluation.
-
-While evaluating the \udq{} expressions the results will be instances of
-\inlinecode{UDQSet} which is a small container class which keeps track of
-well/group names and whether a value is defined or not. The \inlinecode{UDQSet}
-class overrides the arithmetic operators like \inlinecode{UDQSet::operator+()}
-so that expressions like \kw{2 * WOPR 'OP*'} can be easily evaluated in code.
-
-\subsection*{Paralell awareness}
-\label{udq_parallel}
-The opm-common code where the \udq{} functionality is implemented is totally
-unaware of parallel execution, so to be certain that this works for a parallel
-simulator care must be taken. In flow this is handled as:
-\begin{enumerate}
-  \item The \inlinecode{Schedule} class as a whole is identical on all
-    processes.
-  \item The state variables \inlinecode{UDQState} and \inlinecode{SummaryState}
-    are distributed so they are equal on all processes before the \udq{}
-    evaluation. This communication is performed in the simulator.
-\end{enumerate}
-The \udq{} evaluation is invoked from
-\path{opm-simulators/ebos/eclgenericwriter.cc} function
-\inlinecode{evalSummary()}.
-
-
-

dune.module

@@ -5,8 +5,8 @@
 
 Module: opm-common
 Description: Open Porous Media Initiative shared infrastructure
-Version: 2022.10
-Label: 2022.10
+Version: 2020.04-rc4
+Label: 2020.04-rc4
 Maintainer: opm@opm-project.org
 MaintainerName: OPM community
 Url: http://opm-project.org

examples/make_ext_smry.cpp

@@ -1,115 +0,0 @@
-/*
-  Copyright 2019 Equinor ASA.
-
-  This file is part of the Open Porous Media project (OPM).
-
-  OPM is free software: you can redistribute it and/or modify
-  it under the terms of the GNU General Public License as published by
-  the Free Software Foundation, either version 3 of the License, or
-  (at your option) any later version.
-
-  OPM is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-  GNU General Public License for more details.
-
-  You should have received a copy of the GNU General Public License
-  along with OPM.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-
-#include <filesystem>
-#include <iostream>
-#include <getopt.h>
-#include <string.h>
-#include <stdio.h>
-
-#include "config.h"
-
-#if _OPENMP
-#include <omp.h>
-#endif
-
-#include <opm/io/eclipse/ESmry.hpp>
-#include <opm/io/eclipse/EclUtil.hpp>
-
-
-static void printHelp() {
-
-    std::cout << "\nThis program create one or more lodsmry files, designed for effective load on the demand.   \n"
-              << "These files are created with input from the smspec and unsmry file. \n"
-              << "\nIn addition, the program takes these options (which must be given before the arguments):\n\n"
-              << "-f if ESMRY file exist, this will be replaced. Default behaviour is that existing file is kept.\n"
-              << "-n Maximum number of threads to be used if mulitple files should be created.\n"
-              << "-h Print help and exit.\n\n";
-}
-
-
-int main(int argc, char **argv) {
-
-    int c                          = 0;
-#ifdef _OPENMP
-    int max_threads = -1;
-#endif
-    bool force                     = false;
-
-    while ((c = getopt(argc, argv, "fn:h")) != -1) {
-        switch (c) {
-        case 'f':
-            force = true;
-            break;
-        case 'h':
-            printHelp();
-            return 0;
-        case 'n':
-#ifdef _OPENMP
-            max_threads = atoi(optarg);
-#else
-            std::cerr << "OpenMP is disabled - using single thread only\n";
-#endif
-            break;
-        default:
-            return EXIT_FAILURE;
-        }
-    }
-
-    int argOffset = optind;
-
-#ifdef _OPENMP
-    int available_threads = omp_get_max_threads();
-
-    if (max_threads < 0)
-        max_threads = available_threads-2;
-    else if (max_threads > (available_threads - 1))
-        max_threads = available_threads-1;
-
-    if (max_threads > (argc-argOffset))
-        max_threads = argc-argOffset;
-
-    omp_set_num_threads(max_threads);
-#endif
-
-    auto lap0 = std::chrono::system_clock::now();
-
-    #pragma omp parallel for
-    for (int f = argOffset; f < argc; f ++){
-        std::filesystem::path inputFileName = argv[f];
-
-        std::filesystem::path esmryFileName = inputFileName.parent_path() / inputFileName.stem();
-        esmryFileName = esmryFileName += ".ESMRY";
-
-        if (Opm::EclIO::fileExists(esmryFileName) && (force))
-            remove (esmryFileName);
-
-        Opm::EclIO::ESmry smryFile(argv[f]);
-        if (!smryFile.make_esmry_file()){
-            std::cout << "\n! Warning, smspec already have one lod file, existing kept use option -f to replace this" << std::endl;
-        }
-    }
-
-    auto lap1 = std::chrono::system_clock::now();
-    std::chrono::duration<double> elapsed_seconds1 = lap1-lap0;
-    std::cout << "\nruntime for creating " << (argc-argOffset) << " ESMRY files: " << elapsed_seconds1.count() << " seconds\n" << std::endl;
-
-    return 0;
-}

examples/msim.cpp

@@ -19,17 +19,14 @@
 
 #include <opm/output/eclipse/EclipseIO.hpp>
 
-#include <opm/input/eclipse/Deck/Deck.hpp>
+#include <opm/parser/eclipse/Parser/Parser.hpp>
+#include <opm/parser/eclipse/Parser/ParseContext.hpp>
+#include <opm/parser/eclipse/Parser/ErrorGuard.hpp>
 
-#include <opm/input/eclipse/Parser/Parser.hpp>
-#include <opm/input/eclipse/Parser/ParseContext.hpp>
-#include <opm/input/eclipse/Parser/ErrorGuard.hpp>
-
-#include <opm/input/eclipse/Python/Python.hpp>
-#include <opm/input/eclipse/EclipseState/EclipseState.hpp>
-#include <opm/input/eclipse/Schedule/Schedule.hpp>
-#include <opm/input/eclipse/EclipseState/SummaryConfig/SummaryConfig.hpp>
-#include <opm/common/OpmLog/OpmLog.hpp>
+#include <opm/parser/eclipse/Python/Python.hpp>
+#include <opm/parser/eclipse/EclipseState/EclipseState.hpp>
+#include <opm/parser/eclipse/EclipseState/Schedule/Schedule.hpp>
+#include <opm/parser/eclipse/EclipseState/SummaryConfig/SummaryConfig.hpp>
 
 #include <opm/msim/msim.hpp>
 
@@ -41,20 +38,18 @@ int main(int /* argc */, char** argv) {
     Opm::ErrorGuard error_guard;
     auto python = std::make_shared<Opm::Python>();
 
-    Opm::OpmLog::setupSimpleDefaultLogging();
     Opm::Deck deck = parser.parseFile(deck_file, parse_context, error_guard);
     Opm::EclipseState state(deck);
     Opm::Schedule schedule(deck, state, parse_context, error_guard, python);
-    Opm::SummaryConfig summary_config(deck, schedule, state.fieldProps(), state.aquifer(),
-                                      parse_context, error_guard);
+    Opm::SummaryConfig summary_config(deck, schedule, state.getTableManager(), parse_context, error_guard);
 
     if (error_guard) {
         error_guard.dump();
         error_guard.terminate();
     }
 
-    Opm::msim msim(state, schedule);
+    Opm::msim msim(state);
     Opm::EclipseIO io(state, state.getInputGrid(), schedule, summary_config);
-    msim.run(io, false);
+    msim.run(schedule, io, false);
 }
 

examples/opmhash.cpp

@@ -18,16 +18,18 @@
 */
 #include <getopt.h>
 
-#include <vector>
 #include <iostream>
-#include <sstream>
-#include <cstdlib>
-#include <fmt/format.h>
+#include <iomanip>
+#include <vector>
 
-#include <opm/input/eclipse/Parser/Parser.hpp>
-#include <opm/input/eclipse/Parser/ParseContext.hpp>
-#include <opm/input/eclipse/Parser/ErrorGuard.hpp>
-#include <opm/input/eclipse/Deck/Deck.hpp>
+#include <opm/parser/eclipse/Parser/Parser.hpp>
+#include <opm/parser/eclipse/Parser/ParseContext.hpp>
+#include <opm/parser/eclipse/Parser/ErrorGuard.hpp>
+#include <opm/parser/eclipse/Deck/Deck.hpp>
+#include <opm/parser/eclipse/EclipseState/EclipseState.hpp>
+#include <opm/parser/eclipse/EclipseState/EclipseState.hpp>
+#include <opm/parser/eclipse/EclipseState/SummaryConfig/SummaryConfig.hpp>
+#include <opm/parser/eclipse/EclipseState/Schedule/Schedule.hpp>
 
 
 struct keyword {
@@ -47,7 +49,7 @@ struct keyword {
 };
 
 
-std::vector<keyword> load_deck(const std::string& deck_file) {
+std::vector<keyword> load_deck(const char * deck_file) {
     Opm::ParseContext parseContext;
     Opm::ErrorGuard errors;
     Opm::Parser parser;
@@ -71,7 +73,7 @@ std::vector<keyword> load_deck(const std::string& deck_file) {
 }
 
 
-std::size_t make_deck_hash(const std::vector<keyword>& keywords) {
+std::size_t deck_hash(const std::vector<keyword>& keywords) {
     std::stringstream ss;
     for (const auto& kw : keywords)
         ss << kw.content_hash;
@@ -80,14 +82,15 @@ std::size_t make_deck_hash(const std::vector<keyword>& keywords) {
 }
 
 
-void print_keywords(const std::vector<keyword>& keywords, std::size_t deck_hash, bool location_info) {
+void print_keywords(const std::vector<keyword>& keywords, bool location_info) {
     for (const auto& kw : keywords) {
         if (location_info)
-            fmt::print("{:8s} : {}:{} {} \n", kw.name, kw.filename, kw.line_number, kw.content_hash);
+            std::cout << std::setw(8) << std::left << kw.name << " : " << kw.filename << ":" << kw.line_number << " " << kw.content_hash << std::endl;
         else
-            fmt::print("{:8s} : {} \n", kw.name, kw.content_hash);
+            std::cout << std::setw(8) << std::left << kw.name << " : " << kw.content_hash << std::endl;
     }
-    fmt::print("\n{:8s} : {}\n", "Total", deck_hash);
+    std::cout << std::endl;
+    std::cout << std::setw(8) << std::left << "Total" << " : " << deck_hash(keywords) << std::endl;
 }
 
 
@@ -116,12 +119,6 @@ Options:
 
  -l : Add filename and linenumber information to each keyword.
  -s : Short form - only print the hash of the complete deck.
- -S : Silent form - will not print any deck output.
-
-It is possible to add multiple deck arguments, they are then scanned repeatedly,
-and the decks are compared. In the case of multiple deck arguments the exit
-status of the program will be zero if all are equal and nonzero in case of
-differences.
 
 )";
     std::cerr << help_text << std::endl;
@@ -133,11 +130,10 @@ int main(int argc, char** argv) {
     int arg_offset = 1;
     bool location_info = false;
     bool short_form = false;
-    bool silent = false;
 
     while (true) {
         int c;
-        c = getopt(argc, argv, "lsS");
+        c = getopt(argc, argv, "ls");
         if (c == -1)
             break;
 
@@ -148,53 +144,16 @@ int main(int argc, char** argv) {
         case 's':
             short_form = true;
             break;
-        case 'S':
-            silent = true;
-            break;
         }
     }
     arg_offset = optind;
     if (arg_offset >= argc)
         print_help_and_exit();
 
-
-    std::vector<std::pair<std::string, std::size_t>> deck_hash_table;
-    for (int iarg = arg_offset; iarg < argc; iarg++) {
-        const std::string deck_file = argv[iarg];
-        auto keywords = load_deck(deck_file);
-        auto deck_hash = make_deck_hash(keywords);
-        deck_hash_table.emplace_back(deck_file, deck_hash);
-        if (silent)
-            continue;
-
-        if (short_form)
-            std::cout << deck_hash << std::endl;
-        else
-            print_keywords(keywords, deck_hash, location_info);
-    }
-
-    if (deck_hash_table.size() > 1) {
-        bool equal = true;
-        const auto& [first_deck, first_hash] = deck_hash_table[0];
-        for (std::size_t index = 1; index < deck_hash_table.size(); index++) {
-            const auto& [deck, hash] = deck_hash_table[index];
-            if (first_hash != hash)
-                equal = false;
-
-            if (silent)
-                continue;
-
-            fmt::print("{} {} {}\n",
-                       first_deck,
-                       (first_hash == hash) ? "==" : "!=",
-                       deck);
-        }
-
-        if (equal)
-            std::exit(EXIT_SUCCESS);
-        else
-            std::exit(EXIT_FAILURE);
-    }
-
+    auto keywords = load_deck(argv[arg_offset]);
+    if (short_form)
+        std::cout << deck_hash(keywords) << std::endl;
+    else
+        print_keywords(keywords, location_info);
 }
 

examples/opmi.cpp

@@ -21,20 +21,19 @@
 #include <iomanip>
 #include <chrono>
 
-#include <opm/input/eclipse/Parser/Parser.hpp>
-#include <opm/input/eclipse/Parser/ParseContext.hpp>
-#include <opm/input/eclipse/Parser/ErrorGuard.hpp>
-#include <opm/input/eclipse/Deck/Deck.hpp>
-#include <opm/input/eclipse/EclipseState/EclipseState.hpp>
-#include <opm/input/eclipse/EclipseState/EclipseState.hpp>
-#include <opm/input/eclipse/EclipseState/SummaryConfig/SummaryConfig.hpp>
-#include <opm/input/eclipse/Schedule/Schedule.hpp>
-#include <opm/input/eclipse/Python/Python.hpp>
+#include <opm/parser/eclipse/Parser/Parser.hpp>
+#include <opm/parser/eclipse/Parser/ParseContext.hpp>
+#include <opm/parser/eclipse/Parser/ErrorGuard.hpp>
+#include <opm/parser/eclipse/Deck/Deck.hpp>
+#include <opm/parser/eclipse/EclipseState/EclipseState.hpp>
+#include <opm/parser/eclipse/EclipseState/EclipseState.hpp>
+#include <opm/parser/eclipse/EclipseState/SummaryConfig/SummaryConfig.hpp>
+#include <opm/parser/eclipse/EclipseState/Schedule/Schedule.hpp>
+#include <opm/parser/eclipse/Python/Python.hpp>
 
 #include <opm/common/OpmLog/OpmLog.hpp>
 #include <opm/common/OpmLog/StreamLog.hpp>
 #include <opm/common/OpmLog/LogUtil.hpp>
-#include <opm/common/utility/TimeService.hpp>
 
 
 void initLogging() {
@@ -50,30 +49,29 @@ inline void loadDeck( const char * deck_file) {
 
     std::cout << "Loading deck: " << deck_file << " ..... "; std::cout.flush();
 
-    Opm::time_point start;
+    std::chrono::system_clock::time_point start;
 
-    start = Opm::TimeService::now();
+    start = std::chrono::system_clock::now();
     auto deck = parser.parseFile(deck_file, parseContext, errors);
-    auto deck_time = Opm::TimeService::now() - start;
+    auto deck_time = std::chrono::system_clock::now() - start;
 
     std::cout << "parse complete - creating EclipseState .... ";  std::cout.flush();
 
-    start = Opm::TimeService::now();
+    start = std::chrono::system_clock::now();
     Opm::EclipseState state( deck );
-    auto state_time = Opm::TimeService::now() - start;
+    auto state_time = std::chrono::system_clock::now() - start;
 
     std::cout << "creating Schedule .... ";  std::cout.flush();
 
-    start = Opm::TimeService::now();
+    start = std::chrono::system_clock::now();
     Opm::Schedule schedule( deck, state, python);
-    auto schedule_time = Opm::TimeService::now() - start;
+    auto schedule_time = std::chrono::system_clock::now() - start;
 
     std::cout << "creating SummaryConfig .... ";  std::cout.flush();
 
-    start = Opm::TimeService::now();
-    Opm::SummaryConfig summary( deck, schedule, state.fieldProps(), state.aquifer(),
-                                parseContext, errors );
-    auto summary_time = Opm::TimeService::now() - start;
+    start = std::chrono::system_clock::now();
+    Opm::SummaryConfig summary( deck, schedule, state.getTableManager( ), parseContext, errors );
+    auto summary_time = std::chrono::system_clock::now() - start;
 
     std::cout << "complete." << std::endl << std::endl;
     std::cout << "Time: " << std::endl;

examples/opmpack.cpp

@@ -17,23 +17,21 @@
   along with OPM.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#include <filesystem>
 #include <fstream>
 #include <iostream>
 #include <getopt.h>
 
-#include <opm/input/eclipse/Deck/Deck.hpp>
-#include <opm/input/eclipse/EclipseState/InitConfig/InitConfig.hpp>
-#include <opm/input/eclipse/EclipseState/IOConfig/IOConfig.hpp>
-#include <opm/input/eclipse/Parser/ParserKeywords/I.hpp>
-#include <opm/input/eclipse/Parser/ParserKeywords/P.hpp>
-#include <opm/input/eclipse/Parser/ParserKeywords/G.hpp>
-#include <opm/input/eclipse/Parser/Parser.hpp>
-#include <opm/input/eclipse/Parser/ErrorGuard.hpp>
-#include <opm/input/eclipse/Parser/ParseContext.hpp>
-#include <opm/input/eclipse/Parser/InputErrorAction.hpp>
+#include <opm/common/utility/FileSystem.hpp>
+#include <opm/parser/eclipse/Parser/ParserKeywords/I.hpp>
+#include <opm/parser/eclipse/Parser/ParserKeywords/P.hpp>
+#include <opm/parser/eclipse/Parser/ParserKeywords/G.hpp>
+#include <opm/parser/eclipse/Parser/Parser.hpp>
+#include <opm/parser/eclipse/Parser/ErrorGuard.hpp>
+#include <opm/parser/eclipse/Parser/ParseContext.hpp>
+#include <opm/parser/eclipse/Parser/InputErrorAction.hpp>
+#include <opm/parser/eclipse/Deck/Deck.hpp>
 
-namespace fs = std::filesystem;
+namespace fs = Opm::filesystem;
 
 Opm::Deck pack_deck( const char * deck_file, std::ostream& os) {
     Opm::ParseContext parseContext(Opm::InputError::WARN);
@@ -156,14 +154,16 @@ int main(int argc, char** argv) {
             }
 
             using IMPORT = Opm::ParserKeywords::IMPORT;
-            for (const auto& import_keyword : deck.get<IMPORT>()) {
+            for (std::size_t import_index = 0; import_index < deck.count<IMPORT>(); import_index++) {
+                const auto& import_keyword = deck.getKeyword<IMPORT>(import_index);
                 const auto& fname = import_keyword.getRecord(0).getItem<IMPORT::FILE>().get<std::string>(0);
                 copy_file(input_arg.parent_path(), fname, output_dir);
             }
 
 
             using PYACTION = Opm::ParserKeywords::PYACTION;
-            for (const auto& pyaction_keyword : deck.get<PYACTION>()) {
+            for (std::size_t pyaction_index = 0; pyaction_index < deck.count<PYACTION>(); pyaction_index++) {
+                const auto& pyaction_keyword = deck.getKeyword<PYACTION>(pyaction_index);
                 const auto& fname = pyaction_keyword.getRecord(1).getItem<PYACTION::FILENAME>().get<std::string>(0);
                 copy_file(input_arg.parent_path(), fname, output_dir);
             }
@@ -171,7 +171,7 @@ int main(int argc, char** argv) {
 
             using GDFILE = Opm::ParserKeywords::GDFILE;
             if (deck.hasKeyword<GDFILE>()) {
-                const auto& gdfile_keyword = deck.get<GDFILE>().back();
+                const auto& gdfile_keyword = deck.getKeyword<GDFILE>();
                 const auto& fname = gdfile_keyword.getRecord(0).getItem<GDFILE::filename>().get<std::string>(0);
                 copy_file(input_arg.parent_path(), fname, output_dir);
             }

examples/rst_deck.cpp

@@ -1,369 +0,0 @@
-/*
-  Copyright 2021 Statoil ASA.
-
-  This file is part of the Open Porous Media project (OPM).
-
-  OPM is free software: you can redistribute it and/or modify
-  it under the terms of the GNU General Public License as published by
-  the Free Software Foundation, either version 3 of the License, or
-  (at your option) any later version.
-
-  OPM is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-  GNU General Public License for more details.
-
-  You should have received a copy of the GNU General Public License
-  along with OPM.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <cstdlib>
-#include <filesystem>
-#include <fstream>
-#include <iostream>
-#include <getopt.h>
-#include <fmt/format.h>
-#include <unordered_set>
-#include <utility>
-
-#include <opm/input/eclipse/Deck/DeckKeyword.hpp>
-#include <opm/input/eclipse/Units/UnitSystem.hpp>
-#include <opm/input/eclipse/Parser/ParserKeywords/I.hpp>
-#include <opm/input/eclipse/Parser/ParserKeywords/P.hpp>
-#include <opm/input/eclipse/Parser/ParserKeywords/G.hpp>
-#include <opm/input/eclipse/Parser/ParserKeywords/R.hpp>
-#include <opm/input/eclipse/Parser/ParserKeywords/S.hpp>
-#include <opm/input/eclipse/Parser/Parser.hpp>
-#include <opm/input/eclipse/Parser/ErrorGuard.hpp>
-#include <opm/input/eclipse/Parser/ParseContext.hpp>
-#include <opm/input/eclipse/Parser/InputErrorAction.hpp>
-#include <opm/input/eclipse/EclipseState/IOConfig/IOConfig.hpp>
-#include <opm/input/eclipse/Deck/Deck.hpp>
-#include <opm/input/eclipse/Deck/FileDeck.hpp>
-
-namespace fs = std::filesystem;
-
-const std::unordered_set<std::string> remove_from_solution = {"EQUIL", "PRESSURE", "SWAT", "SGAS"};
-
-void print_help_and_exit(const std::optional<std::string> error_msg = {}) {
-
-    if (error_msg.has_value()) {
-        std::cerr << "Error:" << std::endl;
-        std::cerr << error_msg.value() << std::endl;
-        std::cerr << "------------------------------------------------------" << std::endl;
-    }
-
-    std::string keep_keywords;
-    for (const auto& kw : Opm::FileDeck::rst_keep_in_solution)
-        keep_keywords += kw + " ";
-
-    const std::string help_text = fmt::format(R"(
-
-The rst_deck program will load a simulation deck and parameters for a restart
-and reformat the deck to become a restart deck. Before the updated deck is
-output the program will update the SOLUTION and SCHEDULE sections. All keywords
-from the SOLUTION section will be cleared out(1) and a RESTART keyword will be
-inserted. In the SCHEDULE section the program can either remove all keywords up
-until the restart date, or alternatively insert SKIPREST immediately following
-the SCHEDULE keyword.
-
-When creating the updated restart deck the program can either link to unmodified
-include files with INCLUDE statements, create a copy of deck structure in an
-alternative location or create one large file with all keywords in the same
-file. Apart from the alterations to support restart the output deck will be
-equivalent to the input deck, but formatting is not retained and comments have
-been stripped away.
-
-Arguments:
-
-1. The data file we are starting with.
-
-2. The restart source; this can either be a basename with an optional path
-   prefix and a :N to restart from step N; alternatively you can point to an
-   existing restart file. If you point to an existing restart file the input
-   will be validated in several ways:
-
-   a) Unified/multiple files will be checked against the UNIFIN setting of
-      the deck.
-
-   b) Formatted/unformatted will be checked against the FMTIn setting of the
-      deck.
-
-   c) If a single file like /path/to/case/HISTORY.X0067 is given as argument the
-      :N notation to denote report step should not be used.
-
-   If the restart argument is given as the path to an existing file the content
-   of the RESTART keyword will be updated to contain the correct path from the
-   location of the restart deck to the location of the restart file. This path
-   awareness will be fooled if the restart deck is redirected from stdout to a
-   path different from cwd. If the restart argument is given as an absolute
-   filename the RESTART keyword will have an absolute path, if the restart
-   argument is a relative path the RESTART keyword will get a relative path -
-   although an absolute path will be used if the restart file and the output
-   deck have different roots. If the restart argument is given as a string not
-   pointing to an existing file it will be inserted verbatim in the restart
-   deck.
-
-   A restart step value of 0 is interpreted as a dry run - a deck which has not
-   been set up for restart will be written out.
-
-
-3. Basename of the restart deck we create, can optionally contain a path prefix;
-   the path will be created if it does not already exist. This argument is
-   optional, if it is not provided the program will dump a restart deck on
-   stdout. If the argument corresponds to an existing directory the restart case
-   will get the same name as the base case.
-
-Options:
-
--s: Manipulate the SCHEDULE section by inserting a SKIPREST keyword immediately
-    following the SCHEDULE keyword. If the -s option is not used the SCHEDULE
-    section will be modified by removing all keywords until we reach the restart
-    date.
-
--m: [share|inline|copy] The restart deck can reuse the unmodified include files
-    from the base case, this is mode 'share' and is the default. With mode
-    'inline' the restart deck will be one long file and with mode 'copy' the
-    file structure of the base case will be retained. The default if no -m
-    option is given is the 'share' mode.
-
-    In the case of 'share' and 'copy' the correct path to include files will be
-    negotiated based on the path given to the output case in the third argument.
-    If the restart deck is passed to stdout the include files will be resolved
-    based on output in cwd.
-
-Example:
-
-   rst_deck /path/to/history/HISTORY.DATA rst/HISTORY:30 /path/to/rst/RESTART -s
-
-1: The program has a compiled list of keywords which will be retained in the
-   SOLUTION section. The current value of that list is: {}
-
-)", keep_keywords);
-
-    std::cerr << help_text << std::endl;
-    if (error_msg.has_value())
-        std::exit(EXIT_FAILURE);
-
-    std::exit(EXIT_SUCCESS);
-}
-
-
-
-struct Options {
-    std::string input_deck;
-    std::string restart_base;
-    int restart_step;
-    std::optional<std::string> target_path;
-    std::optional<std::string> target_fname;
-
-    Opm::FileDeck::OutputMode mode{Opm::FileDeck::OutputMode::SHARE};
-    bool skiprest{false};
-};
-
-
-Opm::Deck load_deck(const Options& opt) {
-    Opm::ParseContext parseContext(Opm::InputError::WARN);
-    Opm::ErrorGuard errors;
-    Opm::Parser parser;
-
-    /* Use the same default ParseContext as flow. */
-    parseContext.update(Opm::ParseContext::PARSE_RANDOM_SLASH, Opm::InputError::IGNORE);
-    parseContext.update(Opm::ParseContext::PARSE_MISSING_DIMS_KEYWORD, Opm::InputError::WARN);
-    parseContext.update(Opm::ParseContext::SUMMARY_UNKNOWN_WELL, Opm::InputError::WARN);
-    parseContext.update(Opm::ParseContext::SUMMARY_UNKNOWN_GROUP, Opm::InputError::WARN);
-    return parser.parseFile(opt.input_deck, parseContext, errors);
-}
-
-
-Opm::FileDeck::OutputMode mode(const std::string& mode_arg) {
-    if (mode_arg == "inline")
-        return Opm::FileDeck::OutputMode::INLINE;
-
-    if (mode_arg == "share")
-        return Opm::FileDeck::OutputMode::SHARE;
-
-    if (mode_arg == "copy")
-        return Opm::FileDeck::OutputMode::COPY;
-
-    print_help_and_exit(fmt::format("Mode argument: \'{}\' not recognized. Valid options are inline|share|copy", mode_arg));
-    return Opm::FileDeck::OutputMode::INLINE;
-}
-
-std::optional<std::size_t> verify_extension(const std::string& extension, bool unified, bool formatted) {
-    if (unified) {
-        if (formatted) {
-            if (extension == ".FUNRST")
-                return std::nullopt;
-            print_help_and_exit("Deck has specified formatted unified input - expected restart extension: .FUNRST");
-
-        }
-        if (extension == ".UNRST")
-            return std::nullopt;
-        print_help_and_exit("Deck has expected unformatted unified input - expected restart extension: .UNRST");
-    }
-
-    std::size_t report_step;
-    if ((formatted && (extension[1] == 'F')) || (!formatted && (extension[1] == 'X'))) {
-        try {
-            report_step = std::stoi(extension.substr(2));
-            return report_step;
-        }
-        catch (...) {}
-    }
-    print_help_and_exit("Deck has specified multiple input files - expected restart extension: .Xnnnn / .Fnnnn");
-    return std::nullopt;
-}
-
-
-bool same_mount(const fs::path& p1, const fs::path& p2) {
-    auto abs1 = fs::absolute(p1);
-    auto abs2 = fs::absolute(p2);
-
-    auto iter1 = abs1.begin(); iter1++;
-    auto iter2 = abs2.begin(); iter2++;
-
-    auto mnt1 = *iter1;
-    auto mnt2 = *iter2;
-    return (mnt1 == mnt2);
-}
-
-
-void update_restart_path(Options& opt, const std::string& restart_arg, const Opm::IOConfig& io_config) {
-    std::string base;
-    std::optional<std::size_t> rst_step;
-    auto sep_pos = restart_arg.rfind(':');
-
-    auto base_arg = restart_arg.substr(0, sep_pos);
-    if (fs::exists(base_arg)) {
-        auto unif = io_config.getUNIFIN();
-        auto fmt = io_config.getFMTIN();
-        auto path = fs::path(base_arg);
-        auto extension = path.extension();
-        rst_step = verify_extension(extension, unif, fmt);
-        if (path.is_absolute()) {
-            path.replace_extension();
-            base = path;
-        } else {
-            auto target_path = fs::current_path();
-            if (opt.target_path.has_value())
-                target_path = fs::path(opt.target_path.value());
-
-            if (same_mount(path, target_path))
-                base = fs::relative(path, target_path).replace_extension();
-            else
-                base = fs::canonical(fs::absolute(path)).replace_extension();
-        }
-    } else
-        base = base_arg;
-
-    if (!rst_step.has_value()) {
-        if (sep_pos == std::string::npos)
-            print_help_and_exit(fmt::format("Expected restart argument on the form: BASE:NUMBER - e.g. HISTORY:60"));
-        rst_step = std::stoi(restart_arg.substr(sep_pos + 1));
-    }
-
-    opt.restart_step = rst_step.value();
-    opt.restart_base = base;
-}
-
-
-std::pair<Options, std::string> load_options(int argc, char **argv) {
-    Options opt;
-    while (true) {
-        int c;
-        c = getopt(argc, argv, "hm:s");
-        if (c == -1)
-            break;
-
-        switch(c) {
-        case 'm':
-            opt.mode = mode(optarg);
-            break;
-        case 's':
-            opt.skiprest = true;
-            break;
-        case 'h':
-            print_help_and_exit();
-            break;
-        }
-    }
-
-    auto arg_offset = optind;
-    if (arg_offset >= argc)
-        print_help_and_exit();
-
-    opt.input_deck = argv[arg_offset];
-    std::string restart_arg = argv[arg_offset + 1];
-    if ((argc - arg_offset) >= 3) {
-        auto target_arg = argv[arg_offset + 2];
-
-        if (fs::is_directory(target_arg)) {
-            opt.target_path = target_arg;
-            opt.target_fname = fs::path(opt.input_deck).filename();
-        } else {
-            auto target_path = fs::path( fs::absolute(target_arg) );
-            opt.target_path = fs::absolute(target_path.parent_path());
-            opt.target_fname = target_path.filename();
-        }
-
-        if (opt.mode == Opm::FileDeck::OutputMode::COPY) {
-            auto target = fs::path(target_arg).parent_path();
-            if (fs::exists(target)) {
-                auto input = fs::path(opt.input_deck).parent_path();
-                if (fs::equivalent(target, input))
-                    opt.mode = Opm::FileDeck::OutputMode::SHARE;
-            }
-        }
-    } else {
-        if (opt.mode == Opm::FileDeck::OutputMode::COPY)
-            print_help_and_exit("When writing output to stdout you must use inline|share mode");
-    }
-
-    return {opt, restart_arg};
-}
-
-
-void update_solution(const Options& opt, Opm::FileDeck& file_deck)
-{
-    if (opt.restart_step == 0)
-        return;
-
-    const auto solution = file_deck.find("SOLUTION");
-    if (!solution.has_value())
-        print_help_and_exit(fmt::format("Could not find SOLUTION section in input deck: {}", opt.input_deck));
-
-    auto summary = file_deck.find("SUMMARY");
-    if (!summary.has_value())
-        print_help_and_exit(fmt::format("Could not find SUMMARY section in input deck: {}", opt.input_deck));
-
-    file_deck.rst_solution(opt.restart_base, opt.restart_step);
-}
-
-
-void update_schedule(const Options& opt, Opm::FileDeck& file_deck)
-{
-    if (opt.restart_step == 0)
-        return;
-
-    if (opt.skiprest)
-        file_deck.insert_skiprest();
-    else
-        file_deck.skip(opt.restart_step);
-}
-
-
-int main(int argc, char** argv) {
-    auto [options, restart_arg] = load_options(argc, argv);
-    auto deck = load_deck(options);
-    Opm::FileDeck file_deck(deck);
-
-    update_restart_path(options, restart_arg, Opm::IOConfig(deck));
-    update_solution(options, file_deck);
-    update_schedule(options, file_deck);
-    if (!options.target_path.has_value())
-        file_deck.dump_stdout(fs::current_path(), options.mode);
-    else
-        file_deck.dump( options.target_path.value(), options.target_fname.value(), options.mode);
-}
-

examples/wellgraph.cpp

@@ -1,137 +0,0 @@
-/*
-  Copyright 2013, 2020 Equinor ASA.
-
-  This file is part of the Open Porous Media project (OPM).
-
-  OPM is free software: you can redistribute it and/or modify
-  it under the terms of the GNU General Public License as published by
-  the Free Software Foundation, either version 3 of the License, or
-  (at your option) any later version.
-
-  OPM is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-  GNU General Public License for more details.
-
-  You should have received a copy of the GNU General Public License
-  along with OPM.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <filesystem>
-#include <fstream>
-#include <iomanip>
-#include <iostream>
-#include <chrono>
-#include <sstream>
-
-#include <opm/input/eclipse/Parser/Parser.hpp>
-#include <opm/input/eclipse/Parser/ParseContext.hpp>
-#include <opm/input/eclipse/Parser/ErrorGuard.hpp>
-#include <opm/input/eclipse/Deck/Deck.hpp>
-#include <opm/input/eclipse/EclipseState/EclipseState.hpp>
-#include <opm/input/eclipse/Schedule/Schedule.hpp>
-#include <opm/input/eclipse/Python/Python.hpp>
-
-#include <opm/common/OpmLog/OpmLog.hpp>
-#include <opm/common/OpmLog/StreamLog.hpp>
-#include <opm/common/OpmLog/LogUtil.hpp>
-
-
-inline void createDot(const Opm::Schedule& schedule, const std::string& casename)
-{
-    std::cout << "Writing " << casename << ".gv .... ";  std::cout.flush();
-    std::ofstream os(casename + ".gv");
-    os << "// This file was written by the 'wellgraph' utility from OPM.\n";
-    os << "// Find the source code at github.com/OPM.\n";
-    os << "// Convert output to PDF with 'dot -Tpdf " << casename << ".gv > " << casename << ".pdf'\n";
-    os << "strict digraph \"" << casename << "\"\n{\n";
-    const auto groupnames = schedule.groupNames();
-    const std::size_t last = schedule.size() - 1;
-    // Group -> Group relations.
-    for (const auto& gn : groupnames) {
-        const auto& g = schedule.getGroup(gn, last);
-        const auto& children = g.groups();
-        if (!children.empty()) {
-            os << "    \"" << gn << "\" -> {";
-            for (const auto& child : children) {
-                os << " \"" << child << '"';
-            }
-            os << " }\n";
-        }
-    }
-    // Group -> Well relations.
-    os << "    node [shape=box]\n";
-    for (const auto& gn : groupnames) {
-        const auto& g = schedule.getGroup(gn, last);
-        const auto& children = g.wells();
-        if (!children.empty()) {
-            os << "    \"" << gn << "\" -> {";
-            for (const auto& child : children) {
-                os << " \"" << child << '"';
-            }
-            os << " }\n";
-        }
-    }
-    // Color wells by injector or producer.
-    for (const auto& w : schedule.getWellsatEnd()) {
-        os << "    \"" << w.name() << '"';
-        if (w.isProducer() && w.isInjector()) {
-            os << " [color=purple]\n";
-        } else if (w.isProducer()) {
-            os << " [color=red]\n";
-        } else {
-            os << " [color=blue]\n";
-        }
-    }
-    os << "}\n";
-    std::cout << "complete." << std::endl;
-    std::cout << "Convert output to PDF with 'dot -Tpdf " << casename << ".gv > " << casename << ".pdf'\n" << std::endl;
-}
-
-
-inline Opm::Schedule loadSchedule(const std::string& deck_file)
-{
-    Opm::ParseContext parseContext({{Opm::ParseContext::PARSE_RANDOM_SLASH, Opm::InputError::IGNORE},
-                                    {Opm::ParseContext::PARSE_MISSING_DIMS_KEYWORD, Opm::InputError::WARN},
-                                    {Opm::ParseContext::SUMMARY_UNKNOWN_WELL, Opm::InputError::WARN},
-                                    {Opm::ParseContext::SUMMARY_UNKNOWN_GROUP, Opm::InputError::WARN}});
-    Opm::ErrorGuard errors;
-    Opm::Parser parser;
-    auto python = std::make_shared<Opm::Python>();
-
-    std::cout << "Loading and parsing deck: " << deck_file << " ..... "; std::cout.flush();
-    auto deck = parser.parseFile(deck_file, parseContext, errors);
-    std::cout << "complete.\n";
-
-    std::cout << "Creating EclipseState .... ";  std::cout.flush();
-    Opm::EclipseState state( deck );
-    std::cout << "complete.\n";
-
-    std::cout << "Creating Schedule .... ";  std::cout.flush();
-    Opm::Schedule schedule( deck, state, python);
-    std::cout << "complete." << std::endl;
-
-    return schedule;
-}
-
-
-int main(int argc, char** argv)
-{
-    std::ostringstream os;
-    std::shared_ptr<Opm::StreamLog> string_log = std::make_shared<Opm::StreamLog>(os, Opm::Log::DefaultMessageTypes);
-    Opm::OpmLog::addBackend( "STRING" , string_log);
-    try {
-        for (int iarg = 1; iarg < argc; iarg++) {
-            const std::string filename = argv[iarg];
-            const auto sched = loadSchedule(filename);
-            const auto casename = std::filesystem::path(filename).stem();
-            createDot(sched, casename);
-        }
-    } catch (const std::exception& e) {
-        std::cout << "\n\n***** Caught an exception: " << e.what() << std::endl;
-        std::cout << "\n\n***** Printing log: "<< std::endl;
-        std::cout << os.str();
-        std::cout << "\n\n***** Exiting due to errors." << std::endl;
-    }
-}
-

external/fmtlib/LICENSE.rst

@@ -1,27 +0,0 @@
-Copyright (c) 2012 - present, Victor Zverovich
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-"Software"), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
-LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
-OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
---- Optional exception to the license ---
-
-As an exception, if, as a result of your compiling your source code, portions
-of this Software are embedded into a machine-executable object form of such
-source code, you may redistribute such embedded portions in such object form
-without including the above copyright and permission notices.

external/fmtlib/README.opm

@@ -1,12 +0,0 @@
-The include/ directory is a copy of the include directory from version 7.0.3 of
-the fmtlib distribution. The fmtlib can be found at https://github.com/fmtlib/fmt
-
-The fmtlib code embedded here should be compiled in header only mode, to ensure
-that the symbol FMT_HEADER_ONLY must be defined before the the fmt/format.h
-header is included:
-
-   #define FMT_HEADER_ONLY
-   #include <fmt/format.h>
-   
-   ....
-   auto msg = fmt::format("Hello {}", "world");

external/fmtlib/include/fmt/color.h

@@ -1,566 +0,0 @@
-// Formatting library for C++ - color support
-//
-// Copyright (c) 2018 - present, Victor Zverovich and fmt contributors
-// All rights reserved.
-//
-// For the license information refer to format.h.
-
-#ifndef FMT_COLOR_H_
-#define FMT_COLOR_H_
-
-#include "format.h"
-
-FMT_BEGIN_NAMESPACE
-
-enum class color : uint32_t {
-  alice_blue = 0xF0F8FF,               // rgb(240,248,255)
-  antique_white = 0xFAEBD7,            // rgb(250,235,215)
-  aqua = 0x00FFFF,                     // rgb(0,255,255)
-  aquamarine = 0x7FFFD4,               // rgb(127,255,212)
-  azure = 0xF0FFFF,                    // rgb(240,255,255)
-  beige = 0xF5F5DC,                    // rgb(245,245,220)
-  bisque = 0xFFE4C4,                   // rgb(255,228,196)
-  black = 0x000000,                    // rgb(0,0,0)
-  blanched_almond = 0xFFEBCD,          // rgb(255,235,205)
-  blue = 0x0000FF,                     // rgb(0,0,255)
-  blue_violet = 0x8A2BE2,              // rgb(138,43,226)
-  brown = 0xA52A2A,                    // rgb(165,42,42)
-  burly_wood = 0xDEB887,               // rgb(222,184,135)
-  cadet_blue = 0x5F9EA0,               // rgb(95,158,160)
-  chartreuse = 0x7FFF00,               // rgb(127,255,0)
-  chocolate = 0xD2691E,                // rgb(210,105,30)
-  coral = 0xFF7F50,                    // rgb(255,127,80)
-  cornflower_blue = 0x6495ED,          // rgb(100,149,237)
-  cornsilk = 0xFFF8DC,                 // rgb(255,248,220)
-  crimson = 0xDC143C,                  // rgb(220,20,60)
-  cyan = 0x00FFFF,                     // rgb(0,255,255)
-  dark_blue = 0x00008B,                // rgb(0,0,139)
-  dark_cyan = 0x008B8B,                // rgb(0,139,139)
-  dark_golden_rod = 0xB8860B,          // rgb(184,134,11)
-  dark_gray = 0xA9A9A9,                // rgb(169,169,169)
-  dark_green = 0x006400,               // rgb(0,100,0)
-  dark_khaki = 0xBDB76B,               // rgb(189,183,107)
-  dark_magenta = 0x8B008B,             // rgb(139,0,139)
-  dark_olive_green = 0x556B2F,         // rgb(85,107,47)
-  dark_orange = 0xFF8C00,              // rgb(255,140,0)
-  dark_orchid = 0x9932CC,              // rgb(153,50,204)
-  dark_red = 0x8B0000,                 // rgb(139,0,0)
-  dark_salmon = 0xE9967A,              // rgb(233,150,122)
-  dark_sea_green = 0x8FBC8F,           // rgb(143,188,143)
-  dark_slate_blue = 0x483D8B,          // rgb(72,61,139)
-  dark_slate_gray = 0x2F4F4F,          // rgb(47,79,79)
-  dark_turquoise = 0x00CED1,           // rgb(0,206,209)
-  dark_violet = 0x9400D3,              // rgb(148,0,211)
-  deep_pink = 0xFF1493,                // rgb(255,20,147)
-  deep_sky_blue = 0x00BFFF,            // rgb(0,191,255)
-  dim_gray = 0x696969,                 // rgb(105,105,105)
-  dodger_blue = 0x1E90FF,              // rgb(30,144,255)
-  fire_brick = 0xB22222,               // rgb(178,34,34)
-  floral_white = 0xFFFAF0,             // rgb(255,250,240)
-  forest_green = 0x228B22,             // rgb(34,139,34)
-  fuchsia = 0xFF00FF,                  // rgb(255,0,255)
-  gainsboro = 0xDCDCDC,                // rgb(220,220,220)
-  ghost_white = 0xF8F8FF,              // rgb(248,248,255)
-  gold = 0xFFD700,                     // rgb(255,215,0)
-  golden_rod = 0xDAA520,               // rgb(218,165,32)
-  gray = 0x808080,                     // rgb(128,128,128)
-  green = 0x008000,                    // rgb(0,128,0)
-  green_yellow = 0xADFF2F,             // rgb(173,255,47)
-  honey_dew = 0xF0FFF0,                // rgb(240,255,240)
-  hot_pink = 0xFF69B4,                 // rgb(255,105,180)
-  indian_red = 0xCD5C5C,               // rgb(205,92,92)
-  indigo = 0x4B0082,                   // rgb(75,0,130)
-  ivory = 0xFFFFF0,                    // rgb(255,255,240)
-  khaki = 0xF0E68C,                    // rgb(240,230,140)
-  lavender = 0xE6E6FA,                 // rgb(230,230,250)
-  lavender_blush = 0xFFF0F5,           // rgb(255,240,245)
-  lawn_green = 0x7CFC00,               // rgb(124,252,0)
-  lemon_chiffon = 0xFFFACD,            // rgb(255,250,205)
-  light_blue = 0xADD8E6,               // rgb(173,216,230)
-  light_coral = 0xF08080,              // rgb(240,128,128)
-  light_cyan = 0xE0FFFF,               // rgb(224,255,255)
-  light_golden_rod_yellow = 0xFAFAD2,  // rgb(250,250,210)
-  light_gray = 0xD3D3D3,               // rgb(211,211,211)
-  light_green = 0x90EE90,              // rgb(144,238,144)
-  light_pink = 0xFFB6C1,               // rgb(255,182,193)
-  light_salmon = 0xFFA07A,             // rgb(255,160,122)
-  light_sea_green = 0x20B2AA,          // rgb(32,178,170)
-  light_sky_blue = 0x87CEFA,           // rgb(135,206,250)
-  light_slate_gray = 0x778899,         // rgb(119,136,153)
-  light_steel_blue = 0xB0C4DE,         // rgb(176,196,222)
-  light_yellow = 0xFFFFE0,             // rgb(255,255,224)
-  lime = 0x00FF00,                     // rgb(0,255,0)
-  lime_green = 0x32CD32,               // rgb(50,205,50)
-  linen = 0xFAF0E6,                    // rgb(250,240,230)
-  magenta = 0xFF00FF,                  // rgb(255,0,255)
-  maroon = 0x800000,                   // rgb(128,0,0)
-  medium_aquamarine = 0x66CDAA,        // rgb(102,205,170)
-  medium_blue = 0x0000CD,              // rgb(0,0,205)
-  medium_orchid = 0xBA55D3,            // rgb(186,85,211)
-  medium_purple = 0x9370DB,            // rgb(147,112,219)
-  medium_sea_green = 0x3CB371,         // rgb(60,179,113)
-  medium_slate_blue = 0x7B68EE,        // rgb(123,104,238)
-  medium_spring_green = 0x00FA9A,      // rgb(0,250,154)
-  medium_turquoise = 0x48D1CC,         // rgb(72,209,204)
-  medium_violet_red = 0xC71585,        // rgb(199,21,133)
-  midnight_blue = 0x191970,            // rgb(25,25,112)
-  mint_cream = 0xF5FFFA,               // rgb(245,255,250)
-  misty_rose = 0xFFE4E1,               // rgb(255,228,225)
-  moccasin = 0xFFE4B5,                 // rgb(255,228,181)
-  navajo_white = 0xFFDEAD,             // rgb(255,222,173)
-  navy = 0x000080,                     // rgb(0,0,128)
-  old_lace = 0xFDF5E6,                 // rgb(253,245,230)
-  olive = 0x808000,                    // rgb(128,128,0)
-  olive_drab = 0x6B8E23,               // rgb(107,142,35)
-  orange = 0xFFA500,                   // rgb(255,165,0)
-  orange_red = 0xFF4500,               // rgb(255,69,0)
-  orchid = 0xDA70D6,                   // rgb(218,112,214)
-  pale_golden_rod = 0xEEE8AA,          // rgb(238,232,170)
-  pale_green = 0x98FB98,               // rgb(152,251,152)
-  pale_turquoise = 0xAFEEEE,           // rgb(175,238,238)
-  pale_violet_red = 0xDB7093,          // rgb(219,112,147)
-  papaya_whip = 0xFFEFD5,              // rgb(255,239,213)
-  peach_puff = 0xFFDAB9,               // rgb(255,218,185)
-  peru = 0xCD853F,                     // rgb(205,133,63)
-  pink = 0xFFC0CB,                     // rgb(255,192,203)
-  plum = 0xDDA0DD,                     // rgb(221,160,221)
-  powder_blue = 0xB0E0E6,              // rgb(176,224,230)
-  purple = 0x800080,                   // rgb(128,0,128)
-  rebecca_purple = 0x663399,           // rgb(102,51,153)
-  red = 0xFF0000,                      // rgb(255,0,0)
-  rosy_brown = 0xBC8F8F,               // rgb(188,143,143)
-  royal_blue = 0x4169E1,               // rgb(65,105,225)
-  saddle_brown = 0x8B4513,             // rgb(139,69,19)
-  salmon = 0xFA8072,                   // rgb(250,128,114)
-  sandy_brown = 0xF4A460,              // rgb(244,164,96)
-  sea_green = 0x2E8B57,                // rgb(46,139,87)
-  sea_shell = 0xFFF5EE,                // rgb(255,245,238)
-  sienna = 0xA0522D,                   // rgb(160,82,45)
-  silver = 0xC0C0C0,                   // rgb(192,192,192)
-  sky_blue = 0x87CEEB,                 // rgb(135,206,235)
-  slate_blue = 0x6A5ACD,               // rgb(106,90,205)
-  slate_gray = 0x708090,               // rgb(112,128,144)
-  snow = 0xFFFAFA,                     // rgb(255,250,250)
-  spring_green = 0x00FF7F,             // rgb(0,255,127)
-  steel_blue = 0x4682B4,               // rgb(70,130,180)
-  tan = 0xD2B48C,                      // rgb(210,180,140)
-  teal = 0x008080,                     // rgb(0,128,128)
-  thistle = 0xD8BFD8,                  // rgb(216,191,216)
-  tomato = 0xFF6347,                   // rgb(255,99,71)
-  turquoise = 0x40E0D0,                // rgb(64,224,208)
-  violet = 0xEE82EE,                   // rgb(238,130,238)
-  wheat = 0xF5DEB3,                    // rgb(245,222,179)
-  white = 0xFFFFFF,                    // rgb(255,255,255)
-  white_smoke = 0xF5F5F5,              // rgb(245,245,245)
-  yellow = 0xFFFF00,                   // rgb(255,255,0)
-  yellow_green = 0x9ACD32              // rgb(154,205,50)
-};                                     // enum class color
-
-enum class terminal_color : uint8_t {
-  black = 30,
-  red,
-  green,
-  yellow,
-  blue,
-  magenta,
-  cyan,
-  white,
-  bright_black = 90,
-  bright_red,
-  bright_green,
-  bright_yellow,
-  bright_blue,
-  bright_magenta,
-  bright_cyan,
-  bright_white
-};
-
-enum class emphasis : uint8_t {
-  bold = 1,
-  italic = 1 << 1,
-  underline = 1 << 2,
-  strikethrough = 1 << 3
-};
-
-// rgb is a struct for red, green and blue colors.
-// Using the name "rgb" makes some editors show the color in a tooltip.
-struct rgb {
-  FMT_CONSTEXPR rgb() : r(0), g(0), b(0) {}
-  FMT_CONSTEXPR rgb(uint8_t r_, uint8_t g_, uint8_t b_) : r(r_), g(g_), b(b_) {}
-  FMT_CONSTEXPR rgb(uint32_t hex)
-      : r((hex >> 16) & 0xFF), g((hex >> 8) & 0xFF), b(hex & 0xFF) {}
-  FMT_CONSTEXPR rgb(color hex)
-      : r((uint32_t(hex) >> 16) & 0xFF),
-        g((uint32_t(hex) >> 8) & 0xFF),
-        b(uint32_t(hex) & 0xFF) {}
-  uint8_t r;
-  uint8_t g;
-  uint8_t b;
-};
-
-namespace detail {
-
-// color is a struct of either a rgb color or a terminal color.
-struct color_type {
-  FMT_CONSTEXPR color_type() FMT_NOEXCEPT : is_rgb(), value{} {}
-  FMT_CONSTEXPR color_type(color rgb_color) FMT_NOEXCEPT : is_rgb(true),
-                                                           value{} {
-    value.rgb_color = static_cast<uint32_t>(rgb_color);
-  }
-  FMT_CONSTEXPR color_type(rgb rgb_color) FMT_NOEXCEPT : is_rgb(true), value{} {
-    value.rgb_color = (static_cast<uint32_t>(rgb_color.r) << 16) |
-                      (static_cast<uint32_t>(rgb_color.g) << 8) | rgb_color.b;
-  }
-  FMT_CONSTEXPR color_type(terminal_color term_color) FMT_NOEXCEPT : is_rgb(),
-                                                                     value{} {
-    value.term_color = static_cast<uint8_t>(term_color);
-  }
-  bool is_rgb;
-  union color_union {
-    uint8_t term_color;
-    uint32_t rgb_color;
-  } value;
-};
-}  // namespace detail
-
-// Experimental text formatting support.
-class text_style {
- public:
-  FMT_CONSTEXPR text_style(emphasis em = emphasis()) FMT_NOEXCEPT
-      : set_foreground_color(),
-        set_background_color(),
-        ems(em) {}
-
-  FMT_CONSTEXPR text_style& operator|=(const text_style& rhs) {
-    if (!set_foreground_color) {
-      set_foreground_color = rhs.set_foreground_color;
-      foreground_color = rhs.foreground_color;
-    } else if (rhs.set_foreground_color) {
-      if (!foreground_color.is_rgb || !rhs.foreground_color.is_rgb)
-        FMT_THROW(format_error("can't OR a terminal color"));
-      foreground_color.value.rgb_color |= rhs.foreground_color.value.rgb_color;
-    }
-
-    if (!set_background_color) {
-      set_background_color = rhs.set_background_color;
-      background_color = rhs.background_color;
-    } else if (rhs.set_background_color) {
-      if (!background_color.is_rgb || !rhs.background_color.is_rgb)
-        FMT_THROW(format_error("can't OR a terminal color"));
-      background_color.value.rgb_color |= rhs.background_color.value.rgb_color;
-    }
-
-    ems = static_cast<emphasis>(static_cast<uint8_t>(ems) |
-                                static_cast<uint8_t>(rhs.ems));
-    return *this;
-  }
-
-  friend FMT_CONSTEXPR text_style operator|(text_style lhs,
-                                            const text_style& rhs) {
-    return lhs |= rhs;
-  }
-
-  FMT_CONSTEXPR text_style& operator&=(const text_style& rhs) {
-    if (!set_foreground_color) {
-      set_foreground_color = rhs.set_foreground_color;
-      foreground_color = rhs.foreground_color;
-    } else if (rhs.set_foreground_color) {
-      if (!foreground_color.is_rgb || !rhs.foreground_color.is_rgb)
-        FMT_THROW(format_error("can't AND a terminal color"));
-      foreground_color.value.rgb_color &= rhs.foreground_color.value.rgb_color;
-    }
-
-    if (!set_background_color) {
-      set_background_color = rhs.set_background_color;
-      background_color = rhs.background_color;
-    } else if (rhs.set_background_color) {
-      if (!background_color.is_rgb || !rhs.background_color.is_rgb)
-        FMT_THROW(format_error("can't AND a terminal color"));
-      background_color.value.rgb_color &= rhs.background_color.value.rgb_color;
-    }
-
-    ems = static_cast<emphasis>(static_cast<uint8_t>(ems) &
-                                static_cast<uint8_t>(rhs.ems));
-    return *this;
-  }
-
-  friend FMT_CONSTEXPR text_style operator&(text_style lhs,
-                                            const text_style& rhs) {
-    return lhs &= rhs;
-  }
-
-  FMT_CONSTEXPR bool has_foreground() const FMT_NOEXCEPT {
-    return set_foreground_color;
-  }
-  FMT_CONSTEXPR bool has_background() const FMT_NOEXCEPT {
-    return set_background_color;
-  }
-  FMT_CONSTEXPR bool has_emphasis() const FMT_NOEXCEPT {
-    return static_cast<uint8_t>(ems) != 0;
-  }
-  FMT_CONSTEXPR detail::color_type get_foreground() const FMT_NOEXCEPT {
-    FMT_ASSERT(has_foreground(), "no foreground specified for this style");
-    return foreground_color;
-  }
-  FMT_CONSTEXPR detail::color_type get_background() const FMT_NOEXCEPT {
-    FMT_ASSERT(has_background(), "no background specified for this style");
-    return background_color;
-  }
-  FMT_CONSTEXPR emphasis get_emphasis() const FMT_NOEXCEPT {
-    FMT_ASSERT(has_emphasis(), "no emphasis specified for this style");
-    return ems;
-  }
-
- private:
-  FMT_CONSTEXPR text_style(bool is_foreground,
-                           detail::color_type text_color) FMT_NOEXCEPT
-      : set_foreground_color(),
-        set_background_color(),
-        ems() {
-    if (is_foreground) {
-      foreground_color = text_color;
-      set_foreground_color = true;
-    } else {
-      background_color = text_color;
-      set_background_color = true;
-    }
-  }
-
-  friend FMT_CONSTEXPR_DECL text_style fg(detail::color_type foreground)
-      FMT_NOEXCEPT;
-  friend FMT_CONSTEXPR_DECL text_style bg(detail::color_type background)
-      FMT_NOEXCEPT;
-
-  detail::color_type foreground_color;
-  detail::color_type background_color;
-  bool set_foreground_color;
-  bool set_background_color;
-  emphasis ems;
-};
-
-FMT_CONSTEXPR text_style fg(detail::color_type foreground) FMT_NOEXCEPT {
-  return text_style(/*is_foreground=*/true, foreground);
-}
-
-FMT_CONSTEXPR text_style bg(detail::color_type background) FMT_NOEXCEPT {
-  return text_style(/*is_foreground=*/false, background);
-}
-
-FMT_CONSTEXPR text_style operator|(emphasis lhs, emphasis rhs) FMT_NOEXCEPT {
-  return text_style(lhs) | rhs;
-}
-
-namespace detail {
-
-template <typename Char> struct ansi_color_escape {
-  FMT_CONSTEXPR ansi_color_escape(detail::color_type text_color,
-                                  const char* esc) FMT_NOEXCEPT {
-    // If we have a terminal color, we need to output another escape code
-    // sequence.
-    if (!text_color.is_rgb) {
-      bool is_background = esc == detail::data::background_color;
-      uint32_t value = text_color.value.term_color;
-      // Background ASCII codes are the same as the foreground ones but with
-      // 10 more.
-      if (is_background) value += 10u;
-
-      size_t index = 0;
-      buffer[index++] = static_cast<Char>('\x1b');
-      buffer[index++] = static_cast<Char>('[');
-
-      if (value >= 100u) {
-        buffer[index++] = static_cast<Char>('1');
-        value %= 100u;
-      }
-      buffer[index++] = static_cast<Char>('0' + value / 10u);
-      buffer[index++] = static_cast<Char>('0' + value % 10u);
-
-      buffer[index++] = static_cast<Char>('m');
-      buffer[index++] = static_cast<Char>('\0');
-      return;
-    }
-
-    for (int i = 0; i < 7; i++) {
-      buffer[i] = static_cast<Char>(esc[i]);
-    }
-    rgb color(text_color.value.rgb_color);
-    to_esc(color.r, buffer + 7, ';');
-    to_esc(color.g, buffer + 11, ';');
-    to_esc(color.b, buffer + 15, 'm');
-    buffer[19] = static_cast<Char>(0);
-  }
-  FMT_CONSTEXPR ansi_color_escape(emphasis em) FMT_NOEXCEPT {
-    uint8_t em_codes[4] = {};
-    uint8_t em_bits = static_cast<uint8_t>(em);
-    if (em_bits & static_cast<uint8_t>(emphasis::bold)) em_codes[0] = 1;
-    if (em_bits & static_cast<uint8_t>(emphasis::italic)) em_codes[1] = 3;
-    if (em_bits & static_cast<uint8_t>(emphasis::underline)) em_codes[2] = 4;
-    if (em_bits & static_cast<uint8_t>(emphasis::strikethrough))
-      em_codes[3] = 9;
-
-    size_t index = 0;
-    for (int i = 0; i < 4; ++i) {
-      if (!em_codes[i]) continue;
-      buffer[index++] = static_cast<Char>('\x1b');
-      buffer[index++] = static_cast<Char>('[');
-      buffer[index++] = static_cast<Char>('0' + em_codes[i]);
-      buffer[index++] = static_cast<Char>('m');
-    }
-    buffer[index++] = static_cast<Char>(0);
-  }
-  FMT_CONSTEXPR operator const Char*() const FMT_NOEXCEPT { return buffer; }
-
-  FMT_CONSTEXPR const Char* begin() const FMT_NOEXCEPT { return buffer; }
-  FMT_CONSTEXPR const Char* end() const FMT_NOEXCEPT {
-    return buffer + std::char_traits<Char>::length(buffer);
-  }
-
- private:
-  Char buffer[7u + 3u * 4u + 1u];
-
-  static FMT_CONSTEXPR void to_esc(uint8_t c, Char* out,
-                                   char delimiter) FMT_NOEXCEPT {
-    out[0] = static_cast<Char>('0' + c / 100);
-    out[1] = static_cast<Char>('0' + c / 10 % 10);
-    out[2] = static_cast<Char>('0' + c % 10);
-    out[3] = static_cast<Char>(delimiter);
-  }
-};
-
-template <typename Char>
-FMT_CONSTEXPR ansi_color_escape<Char> make_foreground_color(
-    detail::color_type foreground) FMT_NOEXCEPT {
-  return ansi_color_escape<Char>(foreground, detail::data::foreground_color);
-}
-
-template <typename Char>
-FMT_CONSTEXPR ansi_color_escape<Char> make_background_color(
-    detail::color_type background) FMT_NOEXCEPT {
-  return ansi_color_escape<Char>(background, detail::data::background_color);
-}
-
-template <typename Char>
-FMT_CONSTEXPR ansi_color_escape<Char> make_emphasis(emphasis em) FMT_NOEXCEPT {
-  return ansi_color_escape<Char>(em);
-}
-
-template <typename Char>
-inline void fputs(const Char* chars, FILE* stream) FMT_NOEXCEPT {
-  std::fputs(chars, stream);
-}
-
-template <>
-inline void fputs<wchar_t>(const wchar_t* chars, FILE* stream) FMT_NOEXCEPT {
-  std::fputws(chars, stream);
-}
-
-template <typename Char> inline void reset_color(FILE* stream) FMT_NOEXCEPT {
-  fputs(detail::data::reset_color, stream);
-}
-
-template <> inline void reset_color<wchar_t>(FILE* stream) FMT_NOEXCEPT {
-  fputs(detail::data::wreset_color, stream);
-}
-
-template <typename Char>
-inline void reset_color(basic_memory_buffer<Char>& buffer) FMT_NOEXCEPT {
-  const char* begin = data::reset_color;
-  const char* end = begin + sizeof(data::reset_color) - 1;
-  buffer.append(begin, end);
-}
-
-template <typename Char>
-void vformat_to(basic_memory_buffer<Char>& buf, const text_style& ts,
-                basic_string_view<Char> format_str,
-                basic_format_args<buffer_context<Char>> args) {
-  bool has_style = false;
-  if (ts.has_emphasis()) {
-    has_style = true;
-    auto emphasis = detail::make_emphasis<Char>(ts.get_emphasis());
-    buf.append(emphasis.begin(), emphasis.end());
-  }
-  if (ts.has_foreground()) {
-    has_style = true;
-    auto foreground = detail::make_foreground_color<Char>(ts.get_foreground());
-    buf.append(foreground.begin(), foreground.end());
-  }
-  if (ts.has_background()) {
-    has_style = true;
-    auto background = detail::make_background_color<Char>(ts.get_background());
-    buf.append(background.begin(), background.end());
-  }
-  detail::vformat_to(buf, format_str, args);
-  if (has_style) detail::reset_color<Char>(buf);
-}
-}  // namespace detail
-
-template <typename S, typename Char = char_t<S>>
-void vprint(std::FILE* f, const text_style& ts, const S& format,
-            basic_format_args<buffer_context<Char>> args) {
-  basic_memory_buffer<Char> buf;
-  detail::vformat_to(buf, ts, to_string_view(format), args);
-  buf.push_back(Char(0));
-  detail::fputs(buf.data(), f);
-}
-
-/**
-  Formats a string and prints it to the specified file stream using ANSI
-  escape sequences to specify text formatting.
-  Example:
-    fmt::print(fmt::emphasis::bold | fg(fmt::color::red),
-               "Elapsed time: {0:.2f} seconds", 1.23);
- */
-template <typename S, typename... Args,
-          FMT_ENABLE_IF(detail::is_string<S>::value)>
-void print(std::FILE* f, const text_style& ts, const S& format_str,
-           const Args&... args) {
-  detail::check_format_string<Args...>(format_str);
-  using context = buffer_context<char_t<S>>;
-  format_arg_store<context, Args...> as{args...};
-  vprint(f, ts, format_str, basic_format_args<context>(as));
-}
-
-/**
-  Formats a string and prints it to stdout using ANSI escape sequences to
-  specify text formatting.
-  Example:
-    fmt::print(fmt::emphasis::bold | fg(fmt::color::red),
-               "Elapsed time: {0:.2f} seconds", 1.23);
- */
-template <typename S, typename... Args,
-          FMT_ENABLE_IF(detail::is_string<S>::value)>
-void print(const text_style& ts, const S& format_str, const Args&... args) {
-  return print(stdout, ts, format_str, args...);
-}
-
-template <typename S, typename Char = char_t<S>>
-inline std::basic_string<Char> vformat(
-    const text_style& ts, const S& format_str,
-    basic_format_args<buffer_context<type_identity_t<Char>>> args) {
-  basic_memory_buffer<Char> buf;
-  detail::vformat_to(buf, ts, to_string_view(format_str), args);
-  return fmt::to_string(buf);
-}
-
-/**
-  \rst
-  Formats arguments and returns the result as a string using ANSI
-  escape sequences to specify text formatting.
-
-  **Example**::
-
-    #include <fmt/color.h>
-    std::string message = fmt::format(fmt::emphasis::bold | fg(fmt::color::red),
-                                      "The answer is {}", 42);
-  \endrst
-*/
-template <typename S, typename... Args, typename Char = char_t<S>>
-inline std::basic_string<Char> format(const text_style& ts, const S& format_str,
-                                      const Args&... args) {
-  return vformat(ts, to_string_view(format_str),
-                 detail::make_args_checked<Args...>(format_str, args...));
-}
-
-FMT_END_NAMESPACE
-
-#endif  // FMT_COLOR_H_

external/fmtlib/include/fmt/compile.h

@@ -1,665 +0,0 @@
-// Formatting library for C++ - experimental format string compilation
-//
-// Copyright (c) 2012 - present, Victor Zverovich and fmt contributors
-// All rights reserved.
-//
-// For the license information refer to format.h.
-
-#ifndef FMT_COMPILE_H_
-#define FMT_COMPILE_H_
-
-#include <vector>
-
-#include "format.h"
-
-FMT_BEGIN_NAMESPACE
-namespace detail {
-
-// A compile-time string which is compiled into fast formatting code.
-class compiled_string {};
-
-template <typename S>
-struct is_compiled_string : std::is_base_of<compiled_string, S> {};
-
-/**
-  \rst
-  Converts a string literal *s* into a format string that will be parsed at
-  compile time and converted into efficient formatting code. Requires C++17
-  ``constexpr if`` compiler support.
-
-  **Example**::
-
-    // Converts 42 into std::string using the most efficient method and no
-    // runtime format string processing.
-    std::string s = fmt::format(FMT_COMPILE("{}"), 42);
-  \endrst
- */
-#define FMT_COMPILE(s) FMT_STRING_IMPL(s, fmt::detail::compiled_string)
-
-template <typename T, typename... Tail>
-const T& first(const T& value, const Tail&...) {
-  return value;
-}
-
-// Part of a compiled format string. It can be either literal text or a
-// replacement field.
-template <typename Char> struct format_part {
-  enum class kind { arg_index, arg_name, text, replacement };
-
-  struct replacement {
-    arg_ref<Char> arg_id;
-    dynamic_format_specs<Char> specs;
-  };
-
-  kind part_kind;
-  union value {
-    int arg_index;
-    basic_string_view<Char> str;
-    replacement repl;
-
-    FMT_CONSTEXPR value(int index = 0) : arg_index(index) {}
-    FMT_CONSTEXPR value(basic_string_view<Char> s) : str(s) {}
-    FMT_CONSTEXPR value(replacement r) : repl(r) {}
-  } val;
-  // Position past the end of the argument id.
-  const Char* arg_id_end = nullptr;
-
-  FMT_CONSTEXPR format_part(kind k = kind::arg_index, value v = {})
-      : part_kind(k), val(v) {}
-
-  static FMT_CONSTEXPR format_part make_arg_index(int index) {
-    return format_part(kind::arg_index, index);
-  }
-  static FMT_CONSTEXPR format_part make_arg_name(basic_string_view<Char> name) {
-    return format_part(kind::arg_name, name);
-  }
-  static FMT_CONSTEXPR format_part make_text(basic_string_view<Char> text) {
-    return format_part(kind::text, text);
-  }
-  static FMT_CONSTEXPR format_part make_replacement(replacement repl) {
-    return format_part(kind::replacement, repl);
-  }
-};
-
-template <typename Char> struct part_counter {
-  unsigned num_parts = 0;
-
-  FMT_CONSTEXPR void on_text(const Char* begin, const Char* end) {
-    if (begin != end) ++num_parts;
-  }
-
-  FMT_CONSTEXPR int on_arg_id() { return ++num_parts, 0; }
-  FMT_CONSTEXPR int on_arg_id(int) { return ++num_parts, 0; }
-  FMT_CONSTEXPR int on_arg_id(basic_string_view<Char>) {
-    return ++num_parts, 0;
-  }
-
-  FMT_CONSTEXPR void on_replacement_field(int, const Char*) {}
-
-  FMT_CONSTEXPR const Char* on_format_specs(int, const Char* begin,
-                                            const Char* end) {
-    // Find the matching brace.
-    unsigned brace_counter = 0;
-    for (; begin != end; ++begin) {
-      if (*begin == '{') {
-        ++brace_counter;
-      } else if (*begin == '}') {
-        if (brace_counter == 0u) break;
-        --brace_counter;
-      }
-    }
-    return begin;
-  }
-
-  FMT_CONSTEXPR void on_error(const char*) {}
-};
-
-// Counts the number of parts in a format string.
-template <typename Char>
-FMT_CONSTEXPR unsigned count_parts(basic_string_view<Char> format_str) {
-  part_counter<Char> counter;
-  parse_format_string<true>(format_str, counter);
-  return counter.num_parts;
-}
-
-template <typename Char, typename PartHandler>
-class format_string_compiler : public error_handler {
- private:
-  using part = format_part<Char>;
-
-  PartHandler handler_;
-  part part_;
-  basic_string_view<Char> format_str_;
-  basic_format_parse_context<Char> parse_context_;
-
- public:
-  FMT_CONSTEXPR format_string_compiler(basic_string_view<Char> format_str,
-                                       PartHandler handler)
-      : handler_(handler),
-        format_str_(format_str),
-        parse_context_(format_str) {}
-
-  FMT_CONSTEXPR void on_text(const Char* begin, const Char* end) {
-    if (begin != end)
-      handler_(part::make_text({begin, to_unsigned(end - begin)}));
-  }
-
-  FMT_CONSTEXPR int on_arg_id() {
-    part_ = part::make_arg_index(parse_context_.next_arg_id());
-    return 0;
-  }
-
-  FMT_CONSTEXPR int on_arg_id(int id) {
-    parse_context_.check_arg_id(id);
-    part_ = part::make_arg_index(id);
-    return 0;
-  }
-
-  FMT_CONSTEXPR int on_arg_id(basic_string_view<Char> id) {
-    part_ = part::make_arg_name(id);
-    return 0;
-  }
-
-  FMT_CONSTEXPR void on_replacement_field(int, const Char* ptr) {
-    part_.arg_id_end = ptr;
-    handler_(part_);
-  }
-
-  FMT_CONSTEXPR const Char* on_format_specs(int, const Char* begin,
-                                            const Char* end) {
-    auto repl = typename part::replacement();
-    dynamic_specs_handler<basic_format_parse_context<Char>> handler(
-        repl.specs, parse_context_);
-    auto it = parse_format_specs(begin, end, handler);
-    if (*it != '}') on_error("missing '}' in format string");
-    repl.arg_id = part_.part_kind == part::kind::arg_index
-                      ? arg_ref<Char>(part_.val.arg_index)
-                      : arg_ref<Char>(part_.val.str);
-    auto part = part::make_replacement(repl);
-    part.arg_id_end = begin;
-    handler_(part);
-    return it;
-  }
-};
-
-// Compiles a format string and invokes handler(part) for each parsed part.
-template <bool IS_CONSTEXPR, typename Char, typename PartHandler>
-FMT_CONSTEXPR void compile_format_string(basic_string_view<Char> format_str,
-                                         PartHandler handler) {
-  parse_format_string<IS_CONSTEXPR>(
-      format_str,
-      format_string_compiler<Char, PartHandler>(format_str, handler));
-}
-
-template <typename OutputIt, typename Context, typename Id>
-void format_arg(
-    basic_format_parse_context<typename Context::char_type>& parse_ctx,
-    Context& ctx, Id arg_id) {
-  ctx.advance_to(visit_format_arg(
-      arg_formatter<OutputIt, typename Context::char_type>(ctx, &parse_ctx),
-      ctx.arg(arg_id)));
-}
-
-// vformat_to is defined in a subnamespace to prevent ADL.
-namespace cf {
-template <typename Context, typename OutputIt, typename CompiledFormat>
-auto vformat_to(OutputIt out, CompiledFormat& cf,
-                basic_format_args<Context> args) -> typename Context::iterator {
-  using char_type = typename Context::char_type;
-  basic_format_parse_context<char_type> parse_ctx(
-      to_string_view(cf.format_str_));
-  Context ctx(out, args);
-
-  const auto& parts = cf.parts();
-  for (auto part_it = std::begin(parts); part_it != std::end(parts);
-       ++part_it) {
-    const auto& part = *part_it;
-    const auto& value = part.val;
-
-    using format_part_t = format_part<char_type>;
-    switch (part.part_kind) {
-    case format_part_t::kind::text: {
-      const auto text = value.str;
-      auto output = ctx.out();
-      auto&& it = reserve(output, text.size());
-      it = std::copy_n(text.begin(), text.size(), it);
-      ctx.advance_to(output);
-      break;
-    }
-
-    case format_part_t::kind::arg_index:
-      advance_to(parse_ctx, part.arg_id_end);
-      detail::format_arg<OutputIt>(parse_ctx, ctx, value.arg_index);
-      break;
-
-    case format_part_t::kind::arg_name:
-      advance_to(parse_ctx, part.arg_id_end);
-      detail::format_arg<OutputIt>(parse_ctx, ctx, value.str);
-      break;
-
-    case format_part_t::kind::replacement: {
-      const auto& arg_id_value = value.repl.arg_id.val;
-      const auto arg = value.repl.arg_id.kind == arg_id_kind::index
-                           ? ctx.arg(arg_id_value.index)
-                           : ctx.arg(arg_id_value.name);
-
-      auto specs = value.repl.specs;
-
-      handle_dynamic_spec<width_checker>(specs.width, specs.width_ref, ctx);
-      handle_dynamic_spec<precision_checker>(specs.precision,
-                                             specs.precision_ref, ctx);
-
-      error_handler h;
-      numeric_specs_checker<error_handler> checker(h, arg.type());
-      if (specs.align == align::numeric) checker.require_numeric_argument();
-      if (specs.sign != sign::none) checker.check_sign();
-      if (specs.alt) checker.require_numeric_argument();
-      if (specs.precision >= 0) checker.check_precision();
-
-      advance_to(parse_ctx, part.arg_id_end);
-      ctx.advance_to(
-          visit_format_arg(arg_formatter<OutputIt, typename Context::char_type>(
-                               ctx, nullptr, &specs),
-                           arg));
-      break;
-    }
-    }
-  }
-  return ctx.out();
-}
-}  // namespace cf
-
-struct basic_compiled_format {};
-
-template <typename S, typename = void>
-struct compiled_format_base : basic_compiled_format {
-  using char_type = char_t<S>;
-  using parts_container = std::vector<detail::format_part<char_type>>;
-
-  parts_container compiled_parts;
-
-  explicit compiled_format_base(basic_string_view<char_type> format_str) {
-    compile_format_string<false>(format_str,
-                                 [this](const format_part<char_type>& part) {
-                                   compiled_parts.push_back(part);
-                                 });
-  }
-
-  const parts_container& parts() const { return compiled_parts; }
-};
-
-template <typename Char, unsigned N> struct format_part_array {
-  format_part<Char> data[N] = {};
-  FMT_CONSTEXPR format_part_array() = default;
-};
-
-template <typename Char, unsigned N>
-FMT_CONSTEXPR format_part_array<Char, N> compile_to_parts(
-    basic_string_view<Char> format_str) {
-  format_part_array<Char, N> parts;
-  unsigned counter = 0;
-  // This is not a lambda for compatibility with older compilers.
-  struct {
-    format_part<Char>* parts;
-    unsigned* counter;
-    FMT_CONSTEXPR void operator()(const format_part<Char>& part) {
-      parts[(*counter)++] = part;
-    }
-  } collector{parts.data, &counter};
-  compile_format_string<true>(format_str, collector);
-  if (counter < N) {
-    parts.data[counter] =
-        format_part<Char>::make_text(basic_string_view<Char>());
-  }
-  return parts;
-}
-
-template <typename T> constexpr const T& constexpr_max(const T& a, const T& b) {
-  return (a < b) ? b : a;
-}
-
-template <typename S>
-struct compiled_format_base<S, enable_if_t<is_compile_string<S>::value>>
-    : basic_compiled_format {
-  using char_type = char_t<S>;
-
-  FMT_CONSTEXPR explicit compiled_format_base(basic_string_view<char_type>) {}
-
-// Workaround for old compilers. Format string compilation will not be
-// performed there anyway.
-#if FMT_USE_CONSTEXPR
-  static FMT_CONSTEXPR_DECL const unsigned num_format_parts =
-      constexpr_max(count_parts(to_string_view(S())), 1u);
-#else
-  static const unsigned num_format_parts = 1;
-#endif
-
-  using parts_container = format_part<char_type>[num_format_parts];
-
-  const parts_container& parts() const {
-    static FMT_CONSTEXPR_DECL const auto compiled_parts =
-        compile_to_parts<char_type, num_format_parts>(
-            detail::to_string_view(S()));
-    return compiled_parts.data;
-  }
-};
-
-template <typename S, typename... Args>
-class compiled_format : private compiled_format_base<S> {
- public:
-  using typename compiled_format_base<S>::char_type;
-
- private:
-  basic_string_view<char_type> format_str_;
-
-  template <typename Context, typename OutputIt, typename CompiledFormat>
-  friend auto cf::vformat_to(OutputIt out, CompiledFormat& cf,
-                             basic_format_args<Context> args) ->
-      typename Context::iterator;
-
- public:
-  compiled_format() = delete;
-  explicit constexpr compiled_format(basic_string_view<char_type> format_str)
-      : compiled_format_base<S>(format_str), format_str_(format_str) {}
-};
-
-#ifdef __cpp_if_constexpr
-template <typename... Args> struct type_list {};
-
-// Returns a reference to the argument at index N from [first, rest...].
-template <int N, typename T, typename... Args>
-constexpr const auto& get(const T& first, const Args&... rest) {
-  static_assert(N < 1 + sizeof...(Args), "index is out of bounds");
-  if constexpr (N == 0)
-    return first;
-  else
-    return get<N - 1>(rest...);
-}
-
-template <int N, typename> struct get_type_impl;
-
-template <int N, typename... Args> struct get_type_impl<N, type_list<Args...>> {
-  using type = remove_cvref_t<decltype(get<N>(std::declval<Args>()...))>;
-};
-
-template <int N, typename T>
-using get_type = typename get_type_impl<N, T>::type;
-
-template <typename T> struct is_compiled_format : std::false_type {};
-
-template <typename Char> struct text {
-  basic_string_view<Char> data;
-  using char_type = Char;
-
-  template <typename OutputIt, typename... Args>
-  OutputIt format(OutputIt out, const Args&...) const {
-    return write<Char>(out, data);
-  }
-};
-
-template <typename Char>
-struct is_compiled_format<text<Char>> : std::true_type {};
-
-template <typename Char>
-constexpr text<Char> make_text(basic_string_view<Char> s, size_t pos,
-                               size_t size) {
-  return {{&s[pos], size}};
-}
-
-// A replacement field that refers to argument N.
-template <typename Char, typename T, int N> struct field {
-  using char_type = Char;
-
-  template <typename OutputIt, typename... Args>
-  OutputIt format(OutputIt out, const Args&... args) const {
-    // This ensures that the argument type is convertile to `const T&`.
-    const T& arg = get<N>(args...);
-    return write<Char>(out, arg);
-  }
-};
-
-template <typename Char, typename T, int N>
-struct is_compiled_format<field<Char, T, N>> : std::true_type {};
-
-// A replacement field that refers to argument N and has format specifiers.
-template <typename Char, typename T, int N> struct spec_field {
-  using char_type = Char;
-  mutable formatter<T, Char> fmt;
-
-  template <typename OutputIt, typename... Args>
-  OutputIt format(OutputIt out, const Args&... args) const {
-    // This ensures that the argument type is convertile to `const T&`.
-    const T& arg = get<N>(args...);
-    basic_format_context<OutputIt, Char> ctx(out, {});
-    return fmt.format(arg, ctx);
-  }
-};
-
-template <typename Char, typename T, int N>
-struct is_compiled_format<spec_field<Char, T, N>> : std::true_type {};
-
-template <typename L, typename R> struct concat {
-  L lhs;
-  R rhs;
-  using char_type = typename L::char_type;
-
-  template <typename OutputIt, typename... Args>
-  OutputIt format(OutputIt out, const Args&... args) const {
-    out = lhs.format(out, args...);
-    return rhs.format(out, args...);
-  }
-};
-
-template <typename L, typename R>
-struct is_compiled_format<concat<L, R>> : std::true_type {};
-
-template <typename L, typename R>
-constexpr concat<L, R> make_concat(L lhs, R rhs) {
-  return {lhs, rhs};
-}
-
-struct unknown_format {};
-
-template <typename Char>
-constexpr size_t parse_text(basic_string_view<Char> str, size_t pos) {
-  for (size_t size = str.size(); pos != size; ++pos) {
-    if (str[pos] == '{' || str[pos] == '}') break;
-  }
-  return pos;
-}
-
-template <typename Args, size_t POS, int ID, typename S>
-constexpr auto compile_format_string(S format_str);
-
-template <typename Args, size_t POS, int ID, typename T, typename S>
-constexpr auto parse_tail(T head, S format_str) {
-  if constexpr (POS !=
-                basic_string_view<typename S::char_type>(format_str).size()) {
-    constexpr auto tail = compile_format_string<Args, POS, ID>(format_str);
-    if constexpr (std::is_same<remove_cvref_t<decltype(tail)>,
-                               unknown_format>())
-      return tail;
-    else
-      return make_concat(head, tail);
-  } else {
-    return head;
-  }
-}
-
-template <typename T, typename Char> struct parse_specs_result {
-  formatter<T, Char> fmt;
-  size_t end;
-};
-
-template <typename T, typename Char>
-constexpr parse_specs_result<T, Char> parse_specs(basic_string_view<Char> str,
-                                                  size_t pos) {
-  str.remove_prefix(pos);
-  auto ctx = basic_format_parse_context<Char>(str);
-  auto f = formatter<T, Char>();
-  auto end = f.parse(ctx);
-  return {f, pos + (end - str.data()) + 1};
-}
-
-// Compiles a non-empty format string and returns the compiled representation
-// or unknown_format() on unrecognized input.
-template <typename Args, size_t POS, int ID, typename S>
-constexpr auto compile_format_string(S format_str) {
-  using char_type = typename S::char_type;
-  constexpr basic_string_view<char_type> str = format_str;
-  if constexpr (str[POS] == '{') {
-    if (POS + 1 == str.size())
-      throw format_error("unmatched '{' in format string");
-    if constexpr (str[POS + 1] == '{') {
-      return parse_tail<Args, POS + 2, ID>(make_text(str, POS, 1), format_str);
-    } else if constexpr (str[POS + 1] == '}') {
-      using type = get_type<ID, Args>;
-      return parse_tail<Args, POS + 2, ID + 1>(field<char_type, type, ID>(),
-                                               format_str);
-    } else if constexpr (str[POS + 1] == ':') {
-      using type = get_type<ID, Args>;
-      constexpr auto result = parse_specs<type>(str, POS + 2);
-      return parse_tail<Args, result.end, ID + 1>(
-          spec_field<char_type, type, ID>{result.fmt}, format_str);
-    } else {
-      return unknown_format();
-    }
-  } else if constexpr (str[POS] == '}') {
-    if (POS + 1 == str.size())
-      throw format_error("unmatched '}' in format string");
-    return parse_tail<Args, POS + 2, ID>(make_text(str, POS, 1), format_str);
-  } else {
-    constexpr auto end = parse_text(str, POS + 1);
-    return parse_tail<Args, end, ID>(make_text(str, POS, end - POS),
-                                     format_str);
-  }
-}
-
-template <typename... Args, typename S,
-          FMT_ENABLE_IF(is_compile_string<S>::value ||
-                        detail::is_compiled_string<S>::value)>
-constexpr auto compile(S format_str) {
-  constexpr basic_string_view<typename S::char_type> str = format_str;
-  if constexpr (str.size() == 0) {
-    return detail::make_text(str, 0, 0);
-  } else {
-    constexpr auto result =
-        detail::compile_format_string<detail::type_list<Args...>, 0, 0>(
-            format_str);
-    if constexpr (std::is_same<remove_cvref_t<decltype(result)>,
-                               detail::unknown_format>()) {
-      return detail::compiled_format<S, Args...>(to_string_view(format_str));
-    } else {
-      return result;
-    }
-  }
-}
-#else
-template <typename... Args, typename S,
-          FMT_ENABLE_IF(is_compile_string<S>::value)>
-constexpr auto compile(S format_str) -> detail::compiled_format<S, Args...> {
-  return detail::compiled_format<S, Args...>(to_string_view(format_str));
-}
-#endif  // __cpp_if_constexpr
-
-// Compiles the format string which must be a string literal.
-template <typename... Args, typename Char, size_t N>
-auto compile(const Char (&format_str)[N])
-    -> detail::compiled_format<const Char*, Args...> {
-  return detail::compiled_format<const Char*, Args...>(
-      basic_string_view<Char>(format_str, N - 1));
-}
-}  // namespace detail
-
-// DEPRECATED! use FMT_COMPILE instead.
-template <typename... Args>
-FMT_DEPRECATED auto compile(const Args&... args)
-    -> decltype(detail::compile(args...)) {
-  return detail::compile(args...);
-}
-
-#if FMT_USE_CONSTEXPR
-#  ifdef __cpp_if_constexpr
-
-template <typename CompiledFormat, typename... Args,
-          typename Char = typename CompiledFormat::char_type,
-          FMT_ENABLE_IF(detail::is_compiled_format<CompiledFormat>::value)>
-FMT_INLINE std::basic_string<Char> format(const CompiledFormat& cf,
-                                          const Args&... args) {
-  basic_memory_buffer<Char> buffer;
-  detail::buffer<Char>& base = buffer;
-  cf.format(std::back_inserter(base), args...);
-  return to_string(buffer);
-}
-
-template <typename OutputIt, typename CompiledFormat, typename... Args,
-          FMT_ENABLE_IF(detail::is_compiled_format<CompiledFormat>::value)>
-OutputIt format_to(OutputIt out, const CompiledFormat& cf,
-                   const Args&... args) {
-  return cf.format(out, args...);
-}
-#  endif  // __cpp_if_constexpr
-#endif    // FMT_USE_CONSTEXPR
-
-template <typename CompiledFormat, typename... Args,
-          typename Char = typename CompiledFormat::char_type,
-          FMT_ENABLE_IF(std::is_base_of<detail::basic_compiled_format,
-                                        CompiledFormat>::value)>
-std::basic_string<Char> format(const CompiledFormat& cf, const Args&... args) {
-  basic_memory_buffer<Char> buffer;
-  using context = buffer_context<Char>;
-  detail::buffer<Char>& base = buffer;
-  detail::cf::vformat_to<context>(std::back_inserter(base), cf,
-                                  make_format_args<context>(args...));
-  return to_string(buffer);
-}
-
-template <typename S, typename... Args,
-          FMT_ENABLE_IF(detail::is_compiled_string<S>::value)>
-FMT_INLINE std::basic_string<typename S::char_type> format(const S&,
-                                                           Args&&... args) {
-  constexpr basic_string_view<typename S::char_type> str = S();
-  if (str.size() == 2 && str[0] == '{' && str[1] == '}')
-    return fmt::to_string(detail::first(args...));
-  constexpr auto compiled = detail::compile<Args...>(S());
-  return format(compiled, std::forward<Args>(args)...);
-}
-
-template <typename OutputIt, typename CompiledFormat, typename... Args,
-          FMT_ENABLE_IF(std::is_base_of<detail::basic_compiled_format,
-                                        CompiledFormat>::value)>
-OutputIt format_to(OutputIt out, const CompiledFormat& cf,
-                   const Args&... args) {
-  using char_type = typename CompiledFormat::char_type;
-  using context = format_context_t<OutputIt, char_type>;
-  return detail::cf::vformat_to<context>(out, cf,
-                                         make_format_args<context>(args...));
-}
-
-template <typename OutputIt, typename S, typename... Args,
-          FMT_ENABLE_IF(detail::is_compiled_string<S>::value)>
-OutputIt format_to(OutputIt out, const S&, const Args&... args) {
-  constexpr auto compiled = detail::compile<Args...>(S());
-  return format_to(out, compiled, args...);
-}
-
-template <
-    typename OutputIt, typename CompiledFormat, typename... Args,
-    FMT_ENABLE_IF(detail::is_output_iterator<OutputIt>::value&& std::is_base_of<
-                  detail::basic_compiled_format, CompiledFormat>::value)>
-format_to_n_result<OutputIt> format_to_n(OutputIt out, size_t n,
-                                         const CompiledFormat& cf,
-                                         const Args&... args) {
-  auto it =
-      format_to(detail::truncating_iterator<OutputIt>(out, n), cf, args...);
-  return {it.base(), it.count()};
-}
-
-template <typename CompiledFormat, typename... Args>
-size_t formatted_size(const CompiledFormat& cf, const Args&... args) {
-  return format_to(detail::counting_iterator(), cf, args...).count();
-}
-
-FMT_END_NAMESPACE
-
-#endif  // FMT_COMPILE_H_

external/fmtlib/include/fmt/locale.h

@@ -1,78 +0,0 @@
-// Formatting library for C++ - std::locale support
-//
-// Copyright (c) 2012 - present, Victor Zverovich
-// All rights reserved.
-//
-// For the license information refer to format.h.
-
-#ifndef FMT_LOCALE_H_
-#define FMT_LOCALE_H_
-
-#include <locale>
-
-#include "format.h"
-
-FMT_BEGIN_NAMESPACE
-
-namespace detail {
-template <typename Char>
-typename buffer_context<Char>::iterator vformat_to(
-    const std::locale& loc, buffer<Char>& buf,
-    basic_string_view<Char> format_str,
-    basic_format_args<buffer_context<type_identity_t<Char>>> args) {
-  using af = arg_formatter<typename buffer_context<Char>::iterator, Char>;
-  return vformat_to<af>(std::back_inserter(buf), to_string_view(format_str),
-                        args, detail::locale_ref(loc));
-}
-
-template <typename Char>
-std::basic_string<Char> vformat(
-    const std::locale& loc, basic_string_view<Char> format_str,
-    basic_format_args<buffer_context<type_identity_t<Char>>> args) {
-  basic_memory_buffer<Char> buffer;
-  detail::vformat_to(loc, buffer, format_str, args);
-  return fmt::to_string(buffer);
-}
-}  // namespace detail
-
-template <typename S, typename Char = char_t<S>>
-inline std::basic_string<Char> vformat(
-    const std::locale& loc, const S& format_str,
-    basic_format_args<buffer_context<type_identity_t<Char>>> args) {
-  return detail::vformat(loc, to_string_view(format_str), args);
-}
-
-template <typename S, typename... Args, typename Char = char_t<S>>
-inline std::basic_string<Char> format(const std::locale& loc,
-                                      const S& format_str, Args&&... args) {
-  return detail::vformat(
-      loc, to_string_view(format_str),
-      detail::make_args_checked<Args...>(format_str, args...));
-}
-
-template <typename S, typename OutputIt, typename... Args,
-          typename Char = enable_if_t<
-              detail::is_output_iterator<OutputIt>::value, char_t<S>>>
-inline OutputIt vformat_to(
-    OutputIt out, const std::locale& loc, const S& format_str,
-    format_args_t<type_identity_t<OutputIt>, Char> args) {
-  using af = detail::arg_formatter<OutputIt, Char>;
-  return vformat_to<af>(out, to_string_view(format_str), args,
-                        detail::locale_ref(loc));
-}
-
-template <typename OutputIt, typename S, typename... Args,
-          FMT_ENABLE_IF(detail::is_output_iterator<OutputIt>::value&&
-                            detail::is_string<S>::value)>
-inline OutputIt format_to(OutputIt out, const std::locale& loc,
-                          const S& format_str, Args&&... args) {
-  detail::check_format_string<Args...>(format_str);
-  using context = format_context_t<OutputIt, char_t<S>>;
-  format_arg_store<context, Args...> as{args...};
-  return vformat_to(out, loc, to_string_view(format_str),
-                    basic_format_args<context>(as));
-}
-
-FMT_END_NAMESPACE
-
-#endif  // FMT_LOCALE_H_

external/fmtlib/include/fmt/os.h

@@ -1,450 +0,0 @@
-// Formatting library for C++ - optional OS-specific functionality
-//
-// Copyright (c) 2012 - present, Victor Zverovich
-// All rights reserved.
-//
-// For the license information refer to format.h.
-
-#ifndef FMT_OS_H_
-#define FMT_OS_H_
-
-#if defined(__MINGW32__) || defined(__CYGWIN__)
-// Workaround MinGW bug https://sourceforge.net/p/mingw/bugs/2024/.
-#  undef __STRICT_ANSI__
-#endif
-
-#include <cerrno>
-#include <clocale>  // for locale_t
-#include <cstddef>
-#include <cstdio>
-#include <cstdlib>  // for strtod_l
-
-#if defined __APPLE__ || defined(__FreeBSD__)
-#  include <xlocale.h>  // for LC_NUMERIC_MASK on OS X
-#endif
-
-#include "format.h"
-
-// UWP doesn't provide _pipe.
-#if FMT_HAS_INCLUDE("winapifamily.h")
-#  include <winapifamily.h>
-#endif
-#if FMT_HAS_INCLUDE("fcntl.h") && \
-    (!defined(WINAPI_FAMILY) || (WINAPI_FAMILY == WINAPI_FAMILY_DESKTOP_APP))
-#  include <fcntl.h>  // for O_RDONLY
-#  define FMT_USE_FCNTL 1
-#else
-#  define FMT_USE_FCNTL 0
-#endif
-
-#ifndef FMT_POSIX
-#  if defined(_WIN32) && !defined(__MINGW32__)
-// Fix warnings about deprecated symbols.
-#    define FMT_POSIX(call) _##call
-#  else
-#    define FMT_POSIX(call) call
-#  endif
-#endif
-
-// Calls to system functions are wrapped in FMT_SYSTEM for testability.
-#ifdef FMT_SYSTEM
-#  define FMT_POSIX_CALL(call) FMT_SYSTEM(call)
-#else
-#  define FMT_SYSTEM(call) ::call
-#  ifdef _WIN32
-// Fix warnings about deprecated symbols.
-#    define FMT_POSIX_CALL(call) ::_##call
-#  else
-#    define FMT_POSIX_CALL(call) ::call
-#  endif
-#endif
-
-// Retries the expression while it evaluates to error_result and errno
-// equals to EINTR.
-#ifndef _WIN32
-#  define FMT_RETRY_VAL(result, expression, error_result) \
-    do {                                                  \
-      (result) = (expression);                            \
-    } while ((result) == (error_result) && errno == EINTR)
-#else
-#  define FMT_RETRY_VAL(result, expression, error_result) result = (expression)
-#endif
-
-#define FMT_RETRY(result, expression) FMT_RETRY_VAL(result, expression, -1)
-
-FMT_BEGIN_NAMESPACE
-
-/**
-  \rst
-  A reference to a null-terminated string. It can be constructed from a C
-  string or ``std::string``.
-
-  You can use one of the following type aliases for common character types:
-
-  +---------------+-----------------------------+
-  | Type          | Definition                  |
-  +===============+=============================+
-  | cstring_view  | basic_cstring_view<char>    |
-  +---------------+-----------------------------+
-  | wcstring_view | basic_cstring_view<wchar_t> |
-  +---------------+-----------------------------+
-
-  This class is most useful as a parameter type to allow passing
-  different types of strings to a function, for example::
-
-    template <typename... Args>
-    std::string format(cstring_view format_str, const Args & ... args);
-
-    format("{}", 42);
-    format(std::string("{}"), 42);
-  \endrst
- */
-template <typename Char> class basic_cstring_view {
- private:
-  const Char* data_;
-
- public:
-  /** Constructs a string reference object from a C string. */
-  basic_cstring_view(const Char* s) : data_(s) {}
-
-  /**
-    \rst
-    Constructs a string reference from an ``std::string`` object.
-    \endrst
-   */
-  basic_cstring_view(const std::basic_string<Char>& s) : data_(s.c_str()) {}
-
-  /** Returns the pointer to a C string. */
-  const Char* c_str() const { return data_; }
-};
-
-using cstring_view = basic_cstring_view<char>;
-using wcstring_view = basic_cstring_view<wchar_t>;
-
-// An error code.
-class error_code {
- private:
-  int value_;
-
- public:
-  explicit error_code(int value = 0) FMT_NOEXCEPT : value_(value) {}
-
-  int get() const FMT_NOEXCEPT { return value_; }
-};
-
-#ifdef _WIN32
-namespace detail {
-// A converter from UTF-16 to UTF-8.
-// It is only provided for Windows since other systems support UTF-8 natively.
-class utf16_to_utf8 {
- private:
-  memory_buffer buffer_;
-
- public:
-  utf16_to_utf8() {}
-  FMT_API explicit utf16_to_utf8(wstring_view s);
-  operator string_view() const { return string_view(&buffer_[0], size()); }
-  size_t size() const { return buffer_.size() - 1; }
-  const char* c_str() const { return &buffer_[0]; }
-  std::string str() const { return std::string(&buffer_[0], size()); }
-
-  // Performs conversion returning a system error code instead of
-  // throwing exception on conversion error. This method may still throw
-  // in case of memory allocation error.
-  FMT_API int convert(wstring_view s);
-};
-
-FMT_API void format_windows_error(buffer<char>& out, int error_code,
-                                  string_view message) FMT_NOEXCEPT;
-}  // namespace detail
-
-/** A Windows error. */
-class windows_error : public system_error {
- private:
-  FMT_API void init(int error_code, string_view format_str, format_args args);
-
- public:
-  /**
-   \rst
-   Constructs a :class:`fmt::windows_error` object with the description
-   of the form
-
-   .. parsed-literal::
-     *<message>*: *<system-message>*
-
-   where *<message>* is the formatted message and *<system-message>* is the
-   system message corresponding to the error code.
-   *error_code* is a Windows error code as given by ``GetLastError``.
-   If *error_code* is not a valid error code such as -1, the system message
-   will look like "error -1".
-
-   **Example**::
-
-     // This throws a windows_error with the description
-     //   cannot open file 'madeup': The system cannot find the file specified.
-     // or similar (system message may vary).
-     const char *filename = "madeup";
-     LPOFSTRUCT of = LPOFSTRUCT();
-     HFILE file = OpenFile(filename, &of, OF_READ);
-     if (file == HFILE_ERROR) {
-       throw fmt::windows_error(GetLastError(),
-                                "cannot open file '{}'", filename);
-     }
-   \endrst
-  */
-  template <typename... Args>
-  windows_error(int error_code, string_view message, const Args&... args) {
-    init(error_code, message, make_format_args(args...));
-  }
-};
-
-// Reports a Windows error without throwing an exception.
-// Can be used to report errors from destructors.
-FMT_API void report_windows_error(int error_code,
-                                  string_view message) FMT_NOEXCEPT;
-#endif  // _WIN32
-
-// A buffered file.
-class buffered_file {
- private:
-  FILE* file_;
-
-  friend class file;
-
-  explicit buffered_file(FILE* f) : file_(f) {}
-
- public:
-  buffered_file(const buffered_file&) = delete;
-  void operator=(const buffered_file&) = delete;
-
-  // Constructs a buffered_file object which doesn't represent any file.
-  buffered_file() FMT_NOEXCEPT : file_(nullptr) {}
-
-  // Destroys the object closing the file it represents if any.
-  FMT_API ~buffered_file() FMT_NOEXCEPT;
-
- public:
-  buffered_file(buffered_file&& other) FMT_NOEXCEPT : file_(other.file_) {
-    other.file_ = nullptr;
-  }
-
-  buffered_file& operator=(buffered_file&& other) {
-    close();
-    file_ = other.file_;
-    other.file_ = nullptr;
-    return *this;
-  }
-
-  // Opens a file.
-  FMT_API buffered_file(cstring_view filename, cstring_view mode);
-
-  // Closes the file.
-  FMT_API void close();
-
-  // Returns the pointer to a FILE object representing this file.
-  FILE* get() const FMT_NOEXCEPT { return file_; }
-
-  // We place parentheses around fileno to workaround a bug in some versions
-  // of MinGW that define fileno as a macro.
-  FMT_API int(fileno)() const;
-
-  void vprint(string_view format_str, format_args args) {
-    fmt::vprint(file_, format_str, args);
-  }
-
-  template <typename... Args>
-  inline void print(string_view format_str, const Args&... args) {
-    vprint(format_str, make_format_args(args...));
-  }
-};
-
-#if FMT_USE_FCNTL
-// A file. Closed file is represented by a file object with descriptor -1.
-// Methods that are not declared with FMT_NOEXCEPT may throw
-// fmt::system_error in case of failure. Note that some errors such as
-// closing the file multiple times will cause a crash on Windows rather
-// than an exception. You can get standard behavior by overriding the
-// invalid parameter handler with _set_invalid_parameter_handler.
-class file {
- private:
-  int fd_;  // File descriptor.
-
-  // Constructs a file object with a given descriptor.
-  explicit file(int fd) : fd_(fd) {}
-
- public:
-  // Possible values for the oflag argument to the constructor.
-  enum {
-    RDONLY = FMT_POSIX(O_RDONLY),  // Open for reading only.
-    WRONLY = FMT_POSIX(O_WRONLY),  // Open for writing only.
-    RDWR = FMT_POSIX(O_RDWR),      // Open for reading and writing.
-    CREATE = FMT_POSIX(O_CREAT)    // Create if the file doesn't exist.
-  };
-
-  // Constructs a file object which doesn't represent any file.
-  file() FMT_NOEXCEPT : fd_(-1) {}
-
-  // Opens a file and constructs a file object representing this file.
-  FMT_API file(cstring_view path, int oflag);
-
- public:
-  file(const file&) = delete;
-  void operator=(const file&) = delete;
-
-  file(file&& other) FMT_NOEXCEPT : fd_(other.fd_) { other.fd_ = -1; }
-
-  file& operator=(file&& other) FMT_NOEXCEPT {
-    close();
-    fd_ = other.fd_;
-    other.fd_ = -1;
-    return *this;
-  }
-
-  // Destroys the object closing the file it represents if any.
-  FMT_API ~file() FMT_NOEXCEPT;
-
-  // Returns the file descriptor.
-  int descriptor() const FMT_NOEXCEPT { return fd_; }
-
-  // Closes the file.
-  FMT_API void close();
-
-  // Returns the file size. The size has signed type for consistency with
-  // stat::st_size.
-  FMT_API long long size() const;
-
-  // Attempts to read count bytes from the file into the specified buffer.
-  FMT_API size_t read(void* buffer, size_t count);
-
-  // Attempts to write count bytes from the specified buffer to the file.
-  FMT_API size_t write(const void* buffer, size_t count);
-
-  // Duplicates a file descriptor with the dup function and returns
-  // the duplicate as a file object.
-  FMT_API static file dup(int fd);
-
-  // Makes fd be the copy of this file descriptor, closing fd first if
-  // necessary.
-  FMT_API void dup2(int fd);
-
-  // Makes fd be the copy of this file descriptor, closing fd first if
-  // necessary.
-  FMT_API void dup2(int fd, error_code& ec) FMT_NOEXCEPT;
-
-  // Creates a pipe setting up read_end and write_end file objects for reading
-  // and writing respectively.
-  FMT_API static void pipe(file& read_end, file& write_end);
-
-  // Creates a buffered_file object associated with this file and detaches
-  // this file object from the file.
-  FMT_API buffered_file fdopen(const char* mode);
-};
-
-// Returns the memory page size.
-long getpagesize();
-
-class direct_buffered_file;
-
-template <typename S, typename... Args>
-void print(direct_buffered_file& f, const S& format_str,
-           const Args&... args);
-
-// A buffered file with a direct buffer access and no synchronization.
-class direct_buffered_file {
- private:
-  file file_;
-
-  enum { buffer_size = 4096 };
-  char buffer_[buffer_size];
-  int pos_;
-
-  void flush() {
-    if (pos_ == 0) return;
-    file_.write(buffer_, pos_);
-    pos_ = 0;
-  }
-
-  int free_capacity() const { return buffer_size - pos_; }
-
- public:
-  direct_buffered_file(cstring_view path, int oflag)
-    : file_(path, oflag), pos_(0) {}
-
-  ~direct_buffered_file() {
-    flush();
-  }
-
-  void close() {
-    flush();
-    file_.close();
-  }
-
-  template <typename S, typename... Args>
-  friend void print(direct_buffered_file& f, const S& format_str,
-                    const Args&... args) {
-    // We could avoid double buffering.
-    auto buf = fmt::memory_buffer();
-    fmt::format_to(std::back_inserter(buf), format_str, args...);
-    auto remaining_pos = 0;
-    auto remaining_size = buf.size();
-    while (remaining_size > detail::to_unsigned(f.free_capacity())) {
-      auto size = f.free_capacity();
-      memcpy(f.buffer_ + f.pos_, buf.data() + remaining_pos, size);
-      f.pos_ += size;
-      f.flush();
-      remaining_pos += size;
-      remaining_size -= size;
-    }
-    memcpy(f.buffer_ + f.pos_, buf.data() + remaining_pos, remaining_size);
-    f.pos_ += static_cast<int>(remaining_size);
-  }
-};
-#endif  // FMT_USE_FCNTL
-
-#ifdef FMT_LOCALE
-// A "C" numeric locale.
-class locale {
- private:
-#  ifdef _WIN32
-  using locale_t = _locale_t;
-
-  static void freelocale(locale_t loc) { _free_locale(loc); }
-
-  static double strtod_l(const char* nptr, char** endptr, _locale_t loc) {
-    return _strtod_l(nptr, endptr, loc);
-  }
-#  endif
-
-  locale_t locale_;
-
- public:
-  using type = locale_t;
-  locale(const locale&) = delete;
-  void operator=(const locale&) = delete;
-
-  locale() {
-#  ifndef _WIN32
-    locale_ = FMT_SYSTEM(newlocale(LC_NUMERIC_MASK, "C", nullptr));
-#  else
-    locale_ = _create_locale(LC_NUMERIC, "C");
-#  endif
-    if (!locale_) FMT_THROW(system_error(errno, "cannot create locale"));
-  }
-  ~locale() { freelocale(locale_); }
-
-  type get() const { return locale_; }
-
-  // Converts string to floating-point number and advances str past the end
-  // of the parsed input.
-  double strtod(const char*& str) const {
-    char* end = nullptr;
-    double result = strtod_l(str, &end, locale_);
-    str = end;
-    return result;
-  }
-};
-using Locale FMT_DEPRECATED_ALIAS = locale;
-#endif  // FMT_LOCALE
-FMT_END_NAMESPACE
-
-#endif  // FMT_OS_H_

external/fmtlib/include/fmt/ostream.h

@@ -1,167 +0,0 @@
-// Formatting library for C++ - std::ostream support
-//
-// Copyright (c) 2012 - present, Victor Zverovich
-// All rights reserved.
-//
-// For the license information refer to format.h.
-
-#ifndef FMT_OSTREAM_H_
-#define FMT_OSTREAM_H_
-
-#include <ostream>
-
-#include "format.h"
-
-FMT_BEGIN_NAMESPACE
-
-template <typename Char> class basic_printf_parse_context;
-template <typename OutputIt, typename Char> class basic_printf_context;
-
-namespace detail {
-
-template <class Char> class formatbuf : public std::basic_streambuf<Char> {
- private:
-  using int_type = typename std::basic_streambuf<Char>::int_type;
-  using traits_type = typename std::basic_streambuf<Char>::traits_type;
-
-  buffer<Char>& buffer_;
-
- public:
-  formatbuf(buffer<Char>& buf) : buffer_(buf) {}
-
- protected:
-  // The put-area is actually always empty. This makes the implementation
-  // simpler and has the advantage that the streambuf and the buffer are always
-  // in sync and sputc never writes into uninitialized memory. The obvious
-  // disadvantage is that each call to sputc always results in a (virtual) call
-  // to overflow. There is no disadvantage here for sputn since this always
-  // results in a call to xsputn.
-
-  int_type overflow(int_type ch = traits_type::eof()) FMT_OVERRIDE {
-    if (!traits_type::eq_int_type(ch, traits_type::eof()))
-      buffer_.push_back(static_cast<Char>(ch));
-    return ch;
-  }
-
-  std::streamsize xsputn(const Char* s, std::streamsize count) FMT_OVERRIDE {
-    buffer_.append(s, s + count);
-    return count;
-  }
-};
-
-template <typename Char> struct test_stream : std::basic_ostream<Char> {
- private:
-  // Hide all operator<< from std::basic_ostream<Char>.
-  void_t<> operator<<(null<>);
-  void_t<> operator<<(const Char*);
-
-  template <typename T, FMT_ENABLE_IF(std::is_convertible<T, int>::value &&
-                                      !std::is_enum<T>::value)>
-  void_t<> operator<<(T);
-};
-
-// Checks if T has a user-defined operator<< (e.g. not a member of
-// std::ostream).
-template <typename T, typename Char> class is_streamable {
- private:
-  template <typename U>
-  static bool_constant<!std::is_same<decltype(std::declval<test_stream<Char>&>()
-                                              << std::declval<U>()),
-                                     void_t<>>::value>
-  test(int);
-
-  template <typename> static std::false_type test(...);
-
-  using result = decltype(test<T>(0));
-
- public:
-  static const bool value = result::value;
-};
-
-// Write the content of buf to os.
-template <typename Char>
-void write_buffer(std::basic_ostream<Char>& os, buffer<Char>& buf) {
-  const Char* buf_data = buf.data();
-  using unsigned_streamsize = std::make_unsigned<std::streamsize>::type;
-  unsigned_streamsize size = buf.size();
-  unsigned_streamsize max_size = to_unsigned(max_value<std::streamsize>());
-  do {
-    unsigned_streamsize n = size <= max_size ? size : max_size;
-    os.write(buf_data, static_cast<std::streamsize>(n));
-    buf_data += n;
-    size -= n;
-  } while (size != 0);
-}
-
-template <typename Char, typename T>
-void format_value(buffer<Char>& buf, const T& value,
-                  locale_ref loc = locale_ref()) {
-  formatbuf<Char> format_buf(buf);
-  std::basic_ostream<Char> output(&format_buf);
-#if !defined(FMT_STATIC_THOUSANDS_SEPARATOR)
-  if (loc) output.imbue(loc.get<std::locale>());
-#endif
-  output << value;
-  output.exceptions(std::ios_base::failbit | std::ios_base::badbit);
-  buf.resize(buf.size());
-}
-
-// Formats an object of type T that has an overloaded ostream operator<<.
-template <typename T, typename Char>
-struct fallback_formatter<T, Char, enable_if_t<is_streamable<T, Char>::value>>
-    : private formatter<basic_string_view<Char>, Char> {
-  FMT_CONSTEXPR auto parse(basic_format_parse_context<Char>& ctx)
-      -> decltype(ctx.begin()) {
-    return formatter<basic_string_view<Char>, Char>::parse(ctx);
-  }
-  template <typename ParseCtx,
-            FMT_ENABLE_IF(std::is_same<
-                          ParseCtx, basic_printf_parse_context<Char>>::value)>
-  auto parse(ParseCtx& ctx) -> decltype(ctx.begin()) {
-    return ctx.begin();
-  }
-
-  template <typename OutputIt>
-  auto format(const T& value, basic_format_context<OutputIt, Char>& ctx)
-      -> OutputIt {
-    basic_memory_buffer<Char> buffer;
-    format_value(buffer, value, ctx.locale());
-    basic_string_view<Char> str(buffer.data(), buffer.size());
-    return formatter<basic_string_view<Char>, Char>::format(str, ctx);
-  }
-  template <typename OutputIt>
-  auto format(const T& value, basic_printf_context<OutputIt, Char>& ctx)
-      -> OutputIt {
-    basic_memory_buffer<Char> buffer;
-    format_value(buffer, value, ctx.locale());
-    return std::copy(buffer.begin(), buffer.end(), ctx.out());
-  }
-};
-}  // namespace detail
-
-template <typename Char>
-void vprint(std::basic_ostream<Char>& os, basic_string_view<Char> format_str,
-            basic_format_args<buffer_context<type_identity_t<Char>>> args) {
-  basic_memory_buffer<Char> buffer;
-  detail::vformat_to(buffer, format_str, args);
-  detail::write_buffer(os, buffer);
-}
-
-/**
-  \rst
-  Prints formatted data to the stream *os*.
-
-  **Example**::
-
-    fmt::print(cerr, "Don't {}!", "panic");
-  \endrst
- */
-template <typename S, typename... Args,
-          typename Char = enable_if_t<detail::is_string<S>::value, char_t<S>>>
-void print(std::basic_ostream<Char>& os, const S& format_str, Args&&... args) {
-  vprint(os, to_string_view(format_str),
-         detail::make_args_checked<Args...>(format_str, args...));
-}
-FMT_END_NAMESPACE
-
-#endif  // FMT_OSTREAM_H_

external/fmtlib/include/fmt/posix.h

@@ -1,2 +0,0 @@
-#include "os.h"
-#warning "fmt/posix.h is deprecated; use fmt/os.h instead"

external/fmtlib/include/fmt/printf.h

@@ -1,751 +0,0 @@
-// Formatting library for C++ - legacy printf implementation
-//
-// Copyright (c) 2012 - 2016, Victor Zverovich
-// All rights reserved.
-//
-// For the license information refer to format.h.
-
-#ifndef FMT_PRINTF_H_
-#define FMT_PRINTF_H_
-
-#include <algorithm>  // std::max
-#include <limits>     // std::numeric_limits
-
-#include "ostream.h"
-
-FMT_BEGIN_NAMESPACE
-namespace detail {
-
-// Checks if a value fits in int - used to avoid warnings about comparing
-// signed and unsigned integers.
-template <bool IsSigned> struct int_checker {
-  template <typename T> static bool fits_in_int(T value) {
-    unsigned max = max_value<int>();
-    return value <= max;
-  }
-  static bool fits_in_int(bool) { return true; }
-};
-
-template <> struct int_checker<true> {
-  template <typename T> static bool fits_in_int(T value) {
-    return value >= (std::numeric_limits<int>::min)() &&
-           value <= max_value<int>();
-  }
-  static bool fits_in_int(int) { return true; }
-};
-
-class printf_precision_handler {
- public:
-  template <typename T, FMT_ENABLE_IF(std::is_integral<T>::value)>
-  int operator()(T value) {
-    if (!int_checker<std::numeric_limits<T>::is_signed>::fits_in_int(value))
-      FMT_THROW(format_error("number is too big"));
-    return (std::max)(static_cast<int>(value), 0);
-  }
-
-  template <typename T, FMT_ENABLE_IF(!std::is_integral<T>::value)>
-  int operator()(T) {
-    FMT_THROW(format_error("precision is not integer"));
-    return 0;
-  }
-};
-
-// An argument visitor that returns true iff arg is a zero integer.
-class is_zero_int {
- public:
-  template <typename T, FMT_ENABLE_IF(std::is_integral<T>::value)>
-  bool operator()(T value) {
-    return value == 0;
-  }
-
-  template <typename T, FMT_ENABLE_IF(!std::is_integral<T>::value)>
-  bool operator()(T) {
-    return false;
-  }
-};
-
-template <typename T> struct make_unsigned_or_bool : std::make_unsigned<T> {};
-
-template <> struct make_unsigned_or_bool<bool> { using type = bool; };
-
-template <typename T, typename Context> class arg_converter {
- private:
-  using char_type = typename Context::char_type;
-
-  basic_format_arg<Context>& arg_;
-  char_type type_;
-
- public:
-  arg_converter(basic_format_arg<Context>& arg, char_type type)
-      : arg_(arg), type_(type) {}
-
-  void operator()(bool value) {
-    if (type_ != 's') operator()<bool>(value);
-  }
-
-  template <typename U, FMT_ENABLE_IF(std::is_integral<U>::value)>
-  void operator()(U value) {
-    bool is_signed = type_ == 'd' || type_ == 'i';
-    using target_type = conditional_t<std::is_same<T, void>::value, U, T>;
-    if (const_check(sizeof(target_type) <= sizeof(int))) {
-      // Extra casts are used to silence warnings.
-      if (is_signed) {
-        arg_ = detail::make_arg<Context>(
-            static_cast<int>(static_cast<target_type>(value)));
-      } else {
-        using unsigned_type = typename make_unsigned_or_bool<target_type>::type;
-        arg_ = detail::make_arg<Context>(
-            static_cast<unsigned>(static_cast<unsigned_type>(value)));
-      }
-    } else {
-      if (is_signed) {
-        // glibc's printf doesn't sign extend arguments of smaller types:
-        //   std::printf("%lld", -42);  // prints "4294967254"
-        // but we don't have to do the same because it's a UB.
-        arg_ = detail::make_arg<Context>(static_cast<long long>(value));
-      } else {
-        arg_ = detail::make_arg<Context>(
-            static_cast<typename make_unsigned_or_bool<U>::type>(value));
-      }
-    }
-  }
-
-  template <typename U, FMT_ENABLE_IF(!std::is_integral<U>::value)>
-  void operator()(U) {}  // No conversion needed for non-integral types.
-};
-
-// Converts an integer argument to T for printf, if T is an integral type.
-// If T is void, the argument is converted to corresponding signed or unsigned
-// type depending on the type specifier: 'd' and 'i' - signed, other -
-// unsigned).
-template <typename T, typename Context, typename Char>
-void convert_arg(basic_format_arg<Context>& arg, Char type) {
-  visit_format_arg(arg_converter<T, Context>(arg, type), arg);
-}
-
-// Converts an integer argument to char for printf.
-template <typename Context> class char_converter {
- private:
-  basic_format_arg<Context>& arg_;
-
- public:
-  explicit char_converter(basic_format_arg<Context>& arg) : arg_(arg) {}
-
-  template <typename T, FMT_ENABLE_IF(std::is_integral<T>::value)>
-  void operator()(T value) {
-    arg_ = detail::make_arg<Context>(
-        static_cast<typename Context::char_type>(value));
-  }
-
-  template <typename T, FMT_ENABLE_IF(!std::is_integral<T>::value)>
-  void operator()(T) {}  // No conversion needed for non-integral types.
-};
-
-// An argument visitor that return a pointer to a C string if argument is a
-// string or null otherwise.
-template <typename Char> struct get_cstring {
-  template <typename T> const Char* operator()(T) { return nullptr; }
-  const Char* operator()(const Char* s) { return s; }
-};
-
-// Checks if an argument is a valid printf width specifier and sets
-// left alignment if it is negative.
-template <typename Char> class printf_width_handler {
- private:
-  using format_specs = basic_format_specs<Char>;
-
-  format_specs& specs_;
-
- public:
-  explicit printf_width_handler(format_specs& specs) : specs_(specs) {}
-
-  template <typename T, FMT_ENABLE_IF(std::is_integral<T>::value)>
-  unsigned operator()(T value) {
-    auto width = static_cast<uint32_or_64_or_128_t<T>>(value);
-    if (detail::is_negative(value)) {
-      specs_.align = align::left;
-      width = 0 - width;
-    }
-    unsigned int_max = max_value<int>();
-    if (width > int_max) FMT_THROW(format_error("number is too big"));
-    return static_cast<unsigned>(width);
-  }
-
-  template <typename T, FMT_ENABLE_IF(!std::is_integral<T>::value)>
-  unsigned operator()(T) {
-    FMT_THROW(format_error("width is not integer"));
-    return 0;
-  }
-};
-
-template <typename Char, typename Context>
-void vprintf(buffer<Char>& buf, basic_string_view<Char> format,
-             basic_format_args<Context> args) {
-  Context(std::back_inserter(buf), format, args).format();
-}
-}  // namespace detail
-
-// For printing into memory_buffer.
-template <typename Char, typename Context>
-FMT_DEPRECATED void printf(detail::buffer<Char>& buf,
-                           basic_string_view<Char> format,
-                           basic_format_args<Context> args) {
-  return detail::vprintf(buf, format, args);
-}
-using detail::vprintf;
-
-template <typename Char>
-class basic_printf_parse_context : public basic_format_parse_context<Char> {
-  using basic_format_parse_context<Char>::basic_format_parse_context;
-};
-template <typename OutputIt, typename Char> class basic_printf_context;
-
-/**
-  \rst
-  The ``printf`` argument formatter.
-  \endrst
- */
-template <typename OutputIt, typename Char>
-class printf_arg_formatter : public detail::arg_formatter_base<OutputIt, Char> {
- public:
-  using iterator = OutputIt;
-
- private:
-  using char_type = Char;
-  using base = detail::arg_formatter_base<OutputIt, Char>;
-  using context_type = basic_printf_context<OutputIt, Char>;
-
-  context_type& context_;
-
-  void write_null_pointer(char) {
-    this->specs()->type = 0;
-    this->write("(nil)");
-  }
-
-  void write_null_pointer(wchar_t) {
-    this->specs()->type = 0;
-    this->write(L"(nil)");
-  }
-
- public:
-  using format_specs = typename base::format_specs;
-
-  /**
-    \rst
-    Constructs an argument formatter object.
-    *buffer* is a reference to the output buffer and *specs* contains format
-    specifier information for standard argument types.
-    \endrst
-   */
-  printf_arg_formatter(iterator iter, format_specs& specs, context_type& ctx)
-      : base(iter, &specs, detail::locale_ref()), context_(ctx) {}
-
-  template <typename T, FMT_ENABLE_IF(fmt::detail::is_integral<T>::value)>
-  iterator operator()(T value) {
-    // MSVC2013 fails to compile separate overloads for bool and char_type so
-    // use std::is_same instead.
-    if (std::is_same<T, bool>::value) {
-      format_specs& fmt_specs = *this->specs();
-      if (fmt_specs.type != 's') return base::operator()(value ? 1 : 0);
-      fmt_specs.type = 0;
-      this->write(value != 0);
-    } else if (std::is_same<T, char_type>::value) {
-      format_specs& fmt_specs = *this->specs();
-      if (fmt_specs.type && fmt_specs.type != 'c')
-        return (*this)(static_cast<int>(value));
-      fmt_specs.sign = sign::none;
-      fmt_specs.alt = false;
-      fmt_specs.fill[0] = ' ';  // Ignore '0' flag for char types.
-      // align::numeric needs to be overwritten here since the '0' flag is
-      // ignored for non-numeric types
-      if (fmt_specs.align == align::none || fmt_specs.align == align::numeric)
-        fmt_specs.align = align::right;
-      return base::operator()(value);
-    } else {
-      return base::operator()(value);
-    }
-    return this->out();
-  }
-
-  template <typename T, FMT_ENABLE_IF(std::is_floating_point<T>::value)>
-  iterator operator()(T value) {
-    return base::operator()(value);
-  }
-
-  /** Formats a null-terminated C string. */
-  iterator operator()(const char* value) {
-    if (value)
-      base::operator()(value);
-    else if (this->specs()->type == 'p')
-      write_null_pointer(char_type());
-    else
-      this->write("(null)");
-    return this->out();
-  }
-
-  /** Formats a null-terminated wide C string. */
-  iterator operator()(const wchar_t* value) {
-    if (value)
-      base::operator()(value);
-    else if (this->specs()->type == 'p')
-      write_null_pointer(char_type());
-    else
-      this->write(L"(null)");
-    return this->out();
-  }
-
-  iterator operator()(basic_string_view<char_type> value) {
-    return base::operator()(value);
-  }
-
-  iterator operator()(monostate value) { return base::operator()(value); }
-
-  /** Formats a pointer. */
-  iterator operator()(const void* value) {
-    if (value) return base::operator()(value);
-    this->specs()->type = 0;
-    write_null_pointer(char_type());
-    return this->out();
-  }
-
-  /** Formats an argument of a custom (user-defined) type. */
-  iterator operator()(typename basic_format_arg<context_type>::handle handle) {
-    handle.format(context_.parse_context(), context_);
-    return this->out();
-  }
-};
-
-template <typename T> struct printf_formatter {
-  printf_formatter() = delete;
-
-  template <typename ParseContext>
-  auto parse(ParseContext& ctx) -> decltype(ctx.begin()) {
-    return ctx.begin();
-  }
-
-  template <typename FormatContext>
-  auto format(const T& value, FormatContext& ctx) -> decltype(ctx.out()) {
-    detail::format_value(detail::get_container(ctx.out()), value);
-    return ctx.out();
-  }
-};
-
-/**
- This template formats data and writes the output through an output iterator.
- */
-template <typename OutputIt, typename Char> class basic_printf_context {
- public:
-  /** The character type for the output. */
-  using char_type = Char;
-  using iterator = OutputIt;
-  using format_arg = basic_format_arg<basic_printf_context>;
-  using parse_context_type = basic_printf_parse_context<Char>;
-  template <typename T> using formatter_type = printf_formatter<T>;
-
- private:
-  using format_specs = basic_format_specs<char_type>;
-
-  OutputIt out_;
-  basic_format_args<basic_printf_context> args_;
-  parse_context_type parse_ctx_;
-
-  static void parse_flags(format_specs& specs, const Char*& it,
-                          const Char* end);
-
-  // Returns the argument with specified index or, if arg_index is -1, the next
-  // argument.
-  format_arg get_arg(int arg_index = -1);
-
-  // Parses argument index, flags and width and returns the argument index.
-  int parse_header(const Char*& it, const Char* end, format_specs& specs);
-
- public:
-  /**
-   \rst
-   Constructs a ``printf_context`` object. References to the arguments are
-   stored in the context object so make sure they have appropriate lifetimes.
-   \endrst
-   */
-  basic_printf_context(OutputIt out, basic_string_view<char_type> format_str,
-                       basic_format_args<basic_printf_context> args)
-      : out_(out), args_(args), parse_ctx_(format_str) {}
-
-  OutputIt out() { return out_; }
-  void advance_to(OutputIt it) { out_ = it; }
-
-  detail::locale_ref locale() { return {}; }
-
-  format_arg arg(int id) const { return args_.get(id); }
-
-  parse_context_type& parse_context() { return parse_ctx_; }
-
-  FMT_CONSTEXPR void on_error(const char* message) {
-    parse_ctx_.on_error(message);
-  }
-
-  /** Formats stored arguments and writes the output to the range. */
-  template <typename ArgFormatter = printf_arg_formatter<OutputIt, Char>>
-  OutputIt format();
-};
-
-template <typename OutputIt, typename Char>
-void basic_printf_context<OutputIt, Char>::parse_flags(format_specs& specs,
-                                                       const Char*& it,
-                                                       const Char* end) {
-  for (; it != end; ++it) {
-    switch (*it) {
-    case '-':
-      specs.align = align::left;
-      break;
-    case '+':
-      specs.sign = sign::plus;
-      break;
-    case '0':
-      specs.fill[0] = '0';
-      break;
-    case ' ':
-      if (specs.sign != sign::plus) {
-        specs.sign = sign::space;
-      }
-      break;
-    case '#':
-      specs.alt = true;
-      break;
-    default:
-      return;
-    }
-  }
-}
-
-template <typename OutputIt, typename Char>
-typename basic_printf_context<OutputIt, Char>::format_arg
-basic_printf_context<OutputIt, Char>::get_arg(int arg_index) {
-  if (arg_index < 0)
-    arg_index = parse_ctx_.next_arg_id();
-  else
-    parse_ctx_.check_arg_id(--arg_index);
-  return detail::get_arg(*this, arg_index);
-}
-
-template <typename OutputIt, typename Char>
-int basic_printf_context<OutputIt, Char>::parse_header(const Char*& it,
-                                                       const Char* end,
-                                                       format_specs& specs) {
-  int arg_index = -1;
-  char_type c = *it;
-  if (c >= '0' && c <= '9') {
-    // Parse an argument index (if followed by '$') or a width possibly
-    // preceded with '0' flag(s).
-    detail::error_handler eh;
-    int value = parse_nonnegative_int(it, end, eh);
-    if (it != end && *it == '$') {  // value is an argument index
-      ++it;
-      arg_index = value;
-    } else {
-      if (c == '0') specs.fill[0] = '0';
-      if (value != 0) {
-        // Nonzero value means that we parsed width and don't need to
-        // parse it or flags again, so return now.
-        specs.width = value;
-        return arg_index;
-      }
-    }
-  }
-  parse_flags(specs, it, end);
-  // Parse width.
-  if (it != end) {
-    if (*it >= '0' && *it <= '9') {
-      detail::error_handler eh;
-      specs.width = parse_nonnegative_int(it, end, eh);
-    } else if (*it == '*') {
-      ++it;
-      specs.width = static_cast<int>(visit_format_arg(
-          detail::printf_width_handler<char_type>(specs), get_arg()));
-    }
-  }
-  return arg_index;
-}
-
-template <typename OutputIt, typename Char>
-template <typename ArgFormatter>
-OutputIt basic_printf_context<OutputIt, Char>::format() {
-  auto out = this->out();
-  const Char* start = parse_ctx_.begin();
-  const Char* end = parse_ctx_.end();
-  auto it = start;
-  while (it != end) {
-    char_type c = *it++;
-    if (c != '%') continue;
-    if (it != end && *it == c) {
-      out = std::copy(start, it, out);
-      start = ++it;
-      continue;
-    }
-    out = std::copy(start, it - 1, out);
-
-    format_specs specs;
-    specs.align = align::right;
-
-    // Parse argument index, flags and width.
-    int arg_index = parse_header(it, end, specs);
-    if (arg_index == 0) on_error("argument not found");
-
-    // Parse precision.
-    if (it != end && *it == '.') {
-      ++it;
-      c = it != end ? *it : 0;
-      if ('0' <= c && c <= '9') {
-        detail::error_handler eh;
-        specs.precision = parse_nonnegative_int(it, end, eh);
-      } else if (c == '*') {
-        ++it;
-        specs.precision = static_cast<int>(
-            visit_format_arg(detail::printf_precision_handler(), get_arg()));
-      } else {
-        specs.precision = 0;
-      }
-    }
-
-    format_arg arg = get_arg(arg_index);
-    // For d, i, o, u, x, and X conversion specifiers, if a precision is
-    // specified, the '0' flag is ignored
-    if (specs.precision >= 0 && arg.is_integral())
-      specs.fill[0] =
-          ' ';  // Ignore '0' flag for non-numeric types or if '-' present.
-    if (specs.precision >= 0 && arg.type() == detail::type::cstring_type) {
-      auto str = visit_format_arg(detail::get_cstring<Char>(), arg);
-      auto str_end = str + specs.precision;
-      auto nul = std::find(str, str_end, Char());
-      arg = detail::make_arg<basic_printf_context>(basic_string_view<Char>(
-          str,
-          detail::to_unsigned(nul != str_end ? nul - str : specs.precision)));
-    }
-    if (specs.alt && visit_format_arg(detail::is_zero_int(), arg))
-      specs.alt = false;
-    if (specs.fill[0] == '0') {
-      if (arg.is_arithmetic() && specs.align != align::left)
-        specs.align = align::numeric;
-      else
-        specs.fill[0] = ' ';  // Ignore '0' flag for non-numeric types or if '-'
-                              // flag is also present.
-    }
-
-    // Parse length and convert the argument to the required type.
-    c = it != end ? *it++ : 0;
-    char_type t = it != end ? *it : 0;
-    using detail::convert_arg;
-    switch (c) {
-    case 'h':
-      if (t == 'h') {
-        ++it;
-        t = it != end ? *it : 0;
-        convert_arg<signed char>(arg, t);
-      } else {
-        convert_arg<short>(arg, t);
-      }
-      break;
-    case 'l':
-      if (t == 'l') {
-        ++it;
-        t = it != end ? *it : 0;
-        convert_arg<long long>(arg, t);
-      } else {
-        convert_arg<long>(arg, t);
-      }
-      break;
-    case 'j':
-      convert_arg<intmax_t>(arg, t);
-      break;
-    case 'z':
-      convert_arg<size_t>(arg, t);
-      break;
-    case 't':
-      convert_arg<std::ptrdiff_t>(arg, t);
-      break;
-    case 'L':
-      // printf produces garbage when 'L' is omitted for long double, no
-      // need to do the same.
-      break;
-    default:
-      --it;
-      convert_arg<void>(arg, c);
-    }
-
-    // Parse type.
-    if (it == end) FMT_THROW(format_error("invalid format string"));
-    specs.type = static_cast<char>(*it++);
-    if (arg.is_integral()) {
-      // Normalize type.
-      switch (specs.type) {
-      case 'i':
-      case 'u':
-        specs.type = 'd';
-        break;
-      case 'c':
-        visit_format_arg(detail::char_converter<basic_printf_context>(arg),
-                         arg);
-        break;
-      }
-    }
-
-    start = it;
-
-    // Format argument.
-    out = visit_format_arg(ArgFormatter(out, specs, *this), arg);
-  }
-  return std::copy(start, it, out);
-}
-
-template <typename Char>
-using basic_printf_context_t =
-    basic_printf_context<std::back_insert_iterator<detail::buffer<Char>>, Char>;
-
-using printf_context = basic_printf_context_t<char>;
-using wprintf_context = basic_printf_context_t<wchar_t>;
-
-using printf_args = basic_format_args<printf_context>;
-using wprintf_args = basic_format_args<wprintf_context>;
-
-/**
-  \rst
-  Constructs an `~fmt::format_arg_store` object that contains references to
-  arguments and can be implicitly converted to `~fmt::printf_args`.
-  \endrst
- */
-template <typename... Args>
-inline format_arg_store<printf_context, Args...> make_printf_args(
-    const Args&... args) {
-  return {args...};
-}
-
-/**
-  \rst
-  Constructs an `~fmt::format_arg_store` object that contains references to
-  arguments and can be implicitly converted to `~fmt::wprintf_args`.
-  \endrst
- */
-template <typename... Args>
-inline format_arg_store<wprintf_context, Args...> make_wprintf_args(
-    const Args&... args) {
-  return {args...};
-}
-
-template <typename S, typename Char = char_t<S>>
-inline std::basic_string<Char> vsprintf(
-    const S& format,
-    basic_format_args<basic_printf_context_t<type_identity_t<Char>>> args) {
-  basic_memory_buffer<Char> buffer;
-  vprintf(buffer, to_string_view(format), args);
-  return to_string(buffer);
-}
-
-/**
-  \rst
-  Formats arguments and returns the result as a string.
-
-  **Example**::
-
-    std::string message = fmt::sprintf("The answer is %d", 42);
-  \endrst
-*/
-template <typename S, typename... Args,
-          typename Char = enable_if_t<detail::is_string<S>::value, char_t<S>>>
-inline std::basic_string<Char> sprintf(const S& format, const Args&... args) {
-  using context = basic_printf_context_t<Char>;
-  return vsprintf(to_string_view(format), make_format_args<context>(args...));
-}
-
-template <typename S, typename Char = char_t<S>>
-inline int vfprintf(
-    std::FILE* f, const S& format,
-    basic_format_args<basic_printf_context_t<type_identity_t<Char>>> args) {
-  basic_memory_buffer<Char> buffer;
-  vprintf(buffer, to_string_view(format), args);
-  size_t size = buffer.size();
-  return std::fwrite(buffer.data(), sizeof(Char), size, f) < size
-             ? -1
-             : static_cast<int>(size);
-}
-
-/**
-  \rst
-  Prints formatted data to the file *f*.
-
-  **Example**::
-
-    fmt::fprintf(stderr, "Don't %s!", "panic");
-  \endrst
- */
-template <typename S, typename... Args,
-          typename Char = enable_if_t<detail::is_string<S>::value, char_t<S>>>
-inline int fprintf(std::FILE* f, const S& format, const Args&... args) {
-  using context = basic_printf_context_t<Char>;
-  return vfprintf(f, to_string_view(format),
-                  make_format_args<context>(args...));
-}
-
-template <typename S, typename Char = char_t<S>>
-inline int vprintf(
-    const S& format,
-    basic_format_args<basic_printf_context_t<type_identity_t<Char>>> args) {
-  return vfprintf(stdout, to_string_view(format), args);
-}
-
-/**
-  \rst
-  Prints formatted data to ``stdout``.
-
-  **Example**::
-
-    fmt::printf("Elapsed time: %.2f seconds", 1.23);
-  \endrst
- */
-template <typename S, typename... Args,
-          FMT_ENABLE_IF(detail::is_string<S>::value)>
-inline int printf(const S& format_str, const Args&... args) {
-  using context = basic_printf_context_t<char_t<S>>;
-  return vprintf(to_string_view(format_str),
-                 make_format_args<context>(args...));
-}
-
-template <typename S, typename Char = char_t<S>>
-inline int vfprintf(
-    std::basic_ostream<Char>& os, const S& format,
-    basic_format_args<basic_printf_context_t<type_identity_t<Char>>> args) {
-  basic_memory_buffer<Char> buffer;
-  vprintf(buffer, to_string_view(format), args);
-  detail::write_buffer(os, buffer);
-  return static_cast<int>(buffer.size());
-}
-
-/** Formats arguments and writes the output to the range. */
-template <typename ArgFormatter, typename Char,
-          typename Context =
-              basic_printf_context<typename ArgFormatter::iterator, Char>>
-typename ArgFormatter::iterator vprintf(
-    detail::buffer<Char>& out, basic_string_view<Char> format_str,
-    basic_format_args<type_identity_t<Context>> args) {
-  typename ArgFormatter::iterator iter(out);
-  Context(iter, format_str, args).template format<ArgFormatter>();
-  return iter;
-}
-
-/**
-  \rst
-  Prints formatted data to the stream *os*.
-
-  **Example**::
-
-    fmt::fprintf(cerr, "Don't %s!", "panic");
-  \endrst
- */
-template <typename S, typename... Args, typename Char = char_t<S>>
-inline int fprintf(std::basic_ostream<Char>& os, const S& format_str,
-                   const Args&... args) {
-  using context = basic_printf_context_t<Char>;
-  return vfprintf(os, to_string_view(format_str),
-                  make_format_args<context>(args...));
-}
-FMT_END_NAMESPACE
-
-#endif  // FMT_PRINTF_H_

external/fmtlib/include/fmt/ranges.h

@@ -1,386 +0,0 @@
-// Formatting library for C++ - experimental range support
-//
-// Copyright (c) 2012 - present, Victor Zverovich
-// All rights reserved.
-//
-// For the license information refer to format.h.
-//
-// Copyright (c) 2018 - present, Remotion (Igor Schulz)
-// All Rights Reserved
-// {fmt} support for ranges, containers and types tuple interface.
-
-#ifndef FMT_RANGES_H_
-#define FMT_RANGES_H_
-
-#include <initializer_list>
-#include <type_traits>
-
-#include "format.h"
-
-// output only up to N items from the range.
-#ifndef FMT_RANGE_OUTPUT_LENGTH_LIMIT
-#  define FMT_RANGE_OUTPUT_LENGTH_LIMIT 256
-#endif
-
-FMT_BEGIN_NAMESPACE
-
-template <typename Char> struct formatting_base {
-  template <typename ParseContext>
-  FMT_CONSTEXPR auto parse(ParseContext& ctx) -> decltype(ctx.begin()) {
-    return ctx.begin();
-  }
-};
-
-template <typename Char, typename Enable = void>
-struct formatting_range : formatting_base<Char> {
-  static FMT_CONSTEXPR_DECL const size_t range_length_limit =
-      FMT_RANGE_OUTPUT_LENGTH_LIMIT;  // output only up to N items from the
-                                      // range.
-  Char prefix;
-  Char delimiter;
-  Char postfix;
-  formatting_range() : prefix('{'), delimiter(','), postfix('}') {}
-  static FMT_CONSTEXPR_DECL const bool add_delimiter_spaces = true;
-  static FMT_CONSTEXPR_DECL const bool add_prepostfix_space = false;
-};
-
-template <typename Char, typename Enable = void>
-struct formatting_tuple : formatting_base<Char> {
-  Char prefix;
-  Char delimiter;
-  Char postfix;
-  formatting_tuple() : prefix('('), delimiter(','), postfix(')') {}
-  static FMT_CONSTEXPR_DECL const bool add_delimiter_spaces = true;
-  static FMT_CONSTEXPR_DECL const bool add_prepostfix_space = false;
-};
-
-namespace detail {
-
-template <typename RangeT, typename OutputIterator>
-OutputIterator copy(const RangeT& range, OutputIterator out) {
-  for (auto it = range.begin(), end = range.end(); it != end; ++it)
-    *out++ = *it;
-  return out;
-}
-
-template <typename OutputIterator>
-OutputIterator copy(const char* str, OutputIterator out) {
-  while (*str) *out++ = *str++;
-  return out;
-}
-
-template <typename OutputIterator>
-OutputIterator copy(char ch, OutputIterator out) {
-  *out++ = ch;
-  return out;
-}
-
-/// Return true value if T has std::string interface, like std::string_view.
-template <typename T> class is_like_std_string {
-  template <typename U>
-  static auto check(U* p)
-      -> decltype((void)p->find('a'), p->length(), (void)p->data(), int());
-  template <typename> static void check(...);
-
- public:
-  static FMT_CONSTEXPR_DECL const bool value =
-      is_string<T>::value || !std::is_void<decltype(check<T>(nullptr))>::value;
-};
-
-template <typename Char>
-struct is_like_std_string<fmt::basic_string_view<Char>> : std::true_type {};
-
-template <typename... Ts> struct conditional_helper {};
-
-template <typename T, typename _ = void> struct is_range_ : std::false_type {};
-
-#if !FMT_MSC_VER || FMT_MSC_VER > 1800
-template <typename T>
-struct is_range_<
-    T, conditional_t<false,
-                     conditional_helper<decltype(std::declval<T>().begin()),
-                                        decltype(std::declval<T>().end())>,
-                     void>> : std::true_type {};
-#endif
-
-/// tuple_size and tuple_element check.
-template <typename T> class is_tuple_like_ {
-  template <typename U>
-  static auto check(U* p) -> decltype(std::tuple_size<U>::value, int());
-  template <typename> static void check(...);
-
- public:
-  static FMT_CONSTEXPR_DECL const bool value =
-      !std::is_void<decltype(check<T>(nullptr))>::value;
-};
-
-// Check for integer_sequence
-#if defined(__cpp_lib_integer_sequence) || FMT_MSC_VER >= 1900
-template <typename T, T... N>
-using integer_sequence = std::integer_sequence<T, N...>;
-template <size_t... N> using index_sequence = std::index_sequence<N...>;
-template <size_t N> using make_index_sequence = std::make_index_sequence<N>;
-#else
-template <typename T, T... N> struct integer_sequence {
-  using value_type = T;
-
-  static FMT_CONSTEXPR size_t size() { return sizeof...(N); }
-};
-
-template <size_t... N> using index_sequence = integer_sequence<size_t, N...>;
-
-template <typename T, size_t N, T... Ns>
-struct make_integer_sequence : make_integer_sequence<T, N - 1, N - 1, Ns...> {};
-template <typename T, T... Ns>
-struct make_integer_sequence<T, 0, Ns...> : integer_sequence<T, Ns...> {};
-
-template <size_t N>
-using make_index_sequence = make_integer_sequence<size_t, N>;
-#endif
-
-template <class Tuple, class F, size_t... Is>
-void for_each(index_sequence<Is...>, Tuple&& tup, F&& f) FMT_NOEXCEPT {
-  using std::get;
-  // using free function get<I>(T) now.
-  const int _[] = {0, ((void)f(get<Is>(tup)), 0)...};
-  (void)_;  // blocks warnings
-}
-
-template <class T>
-FMT_CONSTEXPR make_index_sequence<std::tuple_size<T>::value> get_indexes(
-    T const&) {
-  return {};
-}
-
-template <class Tuple, class F> void for_each(Tuple&& tup, F&& f) {
-  const auto indexes = get_indexes(tup);
-  for_each(indexes, std::forward<Tuple>(tup), std::forward<F>(f));
-}
-
-template <typename Arg, FMT_ENABLE_IF(!is_like_std_string<
-                                      typename std::decay<Arg>::type>::value)>
-FMT_CONSTEXPR const char* format_str_quoted(bool add_space, const Arg&) {
-  return add_space ? " {}" : "{}";
-}
-
-template <typename Arg, FMT_ENABLE_IF(is_like_std_string<
-                                      typename std::decay<Arg>::type>::value)>
-FMT_CONSTEXPR const char* format_str_quoted(bool add_space, const Arg&) {
-  return add_space ? " \"{}\"" : "\"{}\"";
-}
-
-FMT_CONSTEXPR const char* format_str_quoted(bool add_space, const char*) {
-  return add_space ? " \"{}\"" : "\"{}\"";
-}
-FMT_CONSTEXPR const wchar_t* format_str_quoted(bool add_space, const wchar_t*) {
-  return add_space ? L" \"{}\"" : L"\"{}\"";
-}
-
-FMT_CONSTEXPR const char* format_str_quoted(bool add_space, const char) {
-  return add_space ? " '{}'" : "'{}'";
-}
-FMT_CONSTEXPR const wchar_t* format_str_quoted(bool add_space, const wchar_t) {
-  return add_space ? L" '{}'" : L"'{}'";
-}
-
-}  // namespace detail
-
-template <typename T> struct is_tuple_like {
-  static FMT_CONSTEXPR_DECL const bool value =
-      detail::is_tuple_like_<T>::value && !detail::is_range_<T>::value;
-};
-
-template <typename TupleT, typename Char>
-struct formatter<TupleT, Char, enable_if_t<fmt::is_tuple_like<TupleT>::value>> {
- private:
-  // C++11 generic lambda for format()
-  template <typename FormatContext> struct format_each {
-    template <typename T> void operator()(const T& v) {
-      if (i > 0) {
-        if (formatting.add_prepostfix_space) {
-          *out++ = ' ';
-        }
-        out = detail::copy(formatting.delimiter, out);
-      }
-      out = format_to(out,
-                      detail::format_str_quoted(
-                          (formatting.add_delimiter_spaces && i > 0), v),
-                      v);
-      ++i;
-    }
-
-    formatting_tuple<Char>& formatting;
-    size_t& i;
-    typename std::add_lvalue_reference<decltype(
-        std::declval<FormatContext>().out())>::type out;
-  };
-
- public:
-  formatting_tuple<Char> formatting;
-
-  template <typename ParseContext>
-  FMT_CONSTEXPR auto parse(ParseContext& ctx) -> decltype(ctx.begin()) {
-    return formatting.parse(ctx);
-  }
-
-  template <typename FormatContext = format_context>
-  auto format(const TupleT& values, FormatContext& ctx) -> decltype(ctx.out()) {
-    auto out = ctx.out();
-    size_t i = 0;
-    detail::copy(formatting.prefix, out);
-
-    detail::for_each(values, format_each<FormatContext>{formatting, i, out});
-    if (formatting.add_prepostfix_space) {
-      *out++ = ' ';
-    }
-    detail::copy(formatting.postfix, out);
-
-    return ctx.out();
-  }
-};
-
-template <typename T, typename Char> struct is_range {
-  static FMT_CONSTEXPR_DECL const bool value =
-      detail::is_range_<T>::value && !detail::is_like_std_string<T>::value &&
-      !std::is_convertible<T, std::basic_string<Char>>::value &&
-      !std::is_constructible<detail::std_string_view<Char>, T>::value;
-};
-
-template <typename RangeT, typename Char>
-struct formatter<RangeT, Char,
-                 enable_if_t<fmt::is_range<RangeT, Char>::value>> {
-  formatting_range<Char> formatting;
-
-  template <typename ParseContext>
-  FMT_CONSTEXPR auto parse(ParseContext& ctx) -> decltype(ctx.begin()) {
-    return formatting.parse(ctx);
-  }
-
-  template <typename FormatContext>
-  typename FormatContext::iterator format(const RangeT& values,
-                                          FormatContext& ctx) {
-    auto out = detail::copy(formatting.prefix, ctx.out());
-    size_t i = 0;
-    auto it = values.begin();
-    auto end = values.end();
-    for (; it != end; ++it) {
-      if (i > 0) {
-        if (formatting.add_prepostfix_space) *out++ = ' ';
-        out = detail::copy(formatting.delimiter, out);
-      }
-      out = format_to(out,
-                      detail::format_str_quoted(
-                          (formatting.add_delimiter_spaces && i > 0), *it),
-                      *it);
-      if (++i > formatting.range_length_limit) {
-        out = format_to(out, " ... <other elements>");
-        break;
-      }
-    }
-    if (formatting.add_prepostfix_space) *out++ = ' ';
-    return detail::copy(formatting.postfix, out);
-  }
-};
-
-template <typename Char, typename... T> struct tuple_arg_join : detail::view {
-  const std::tuple<T...>& tuple;
-  basic_string_view<Char> sep;
-
-  tuple_arg_join(const std::tuple<T...>& t, basic_string_view<Char> s)
-      : tuple{t}, sep{s} {}
-};
-
-template <typename Char, typename... T>
-struct formatter<tuple_arg_join<Char, T...>, Char> {
-  template <typename ParseContext>
-  FMT_CONSTEXPR auto parse(ParseContext& ctx) -> decltype(ctx.begin()) {
-    return ctx.begin();
-  }
-
-  template <typename FormatContext>
-  typename FormatContext::iterator format(
-      const tuple_arg_join<Char, T...>& value, FormatContext& ctx) {
-    return format(value, ctx, detail::make_index_sequence<sizeof...(T)>{});
-  }
-
- private:
-  template <typename FormatContext, size_t... N>
-  typename FormatContext::iterator format(
-      const tuple_arg_join<Char, T...>& value, FormatContext& ctx,
-      detail::index_sequence<N...>) {
-    return format_args(value, ctx, std::get<N>(value.tuple)...);
-  }
-
-  template <typename FormatContext>
-  typename FormatContext::iterator format_args(
-      const tuple_arg_join<Char, T...>&, FormatContext& ctx) {
-    // NOTE: for compilers that support C++17, this empty function instantiation
-    // can be replaced with a constexpr branch in the variadic overload.
-    return ctx.out();
-  }
-
-  template <typename FormatContext, typename Arg, typename... Args>
-  typename FormatContext::iterator format_args(
-      const tuple_arg_join<Char, T...>& value, FormatContext& ctx,
-      const Arg& arg, const Args&... args) {
-    using base = formatter<typename std::decay<Arg>::type, Char>;
-    auto out = ctx.out();
-    out = base{}.format(arg, ctx);
-    if (sizeof...(Args) > 0) {
-      out = std::copy(value.sep.begin(), value.sep.end(), out);
-      ctx.advance_to(out);
-      return format_args(value, ctx, args...);
-    }
-    return out;
-  }
-};
-
-/**
-  \rst
-  Returns an object that formats `tuple` with elements separated by `sep`.
-
-  **Example**::
-
-    std::tuple<int, char> t = {1, 'a'};
-    fmt::print("{}", fmt::join(t, ", "));
-    // Output: "1, a"
-  \endrst
- */
-template <typename... T>
-FMT_CONSTEXPR tuple_arg_join<char, T...> join(const std::tuple<T...>& tuple,
-                                              string_view sep) {
-  return {tuple, sep};
-}
-
-template <typename... T>
-FMT_CONSTEXPR tuple_arg_join<wchar_t, T...> join(const std::tuple<T...>& tuple,
-                                                 wstring_view sep) {
-  return {tuple, sep};
-}
-
-/**
-  \rst
-  Returns an object that formats `initializer_list` with elements separated by
-  `sep`.
-
-  **Example**::
-
-    fmt::print("{}", fmt::join({1, 2, 3}, ", "));
-    // Output: "1, 2, 3"
-  \endrst
- */
-template <typename T>
-arg_join<const T*, const T*, char> join(std::initializer_list<T> list,
-                                        string_view sep) {
-  return join(std::begin(list), std::end(list), sep);
-}
-
-template <typename T>
-arg_join<const T*, const T*, wchar_t> join(std::initializer_list<T> list,
-                                           wstring_view sep) {
-  return join(std::begin(list), std::end(list), sep);
-}
-
-FMT_END_NAMESPACE
-
-#endif  // FMT_RANGES_H_

jenkins/build-opm-module.sh

@@ -3,7 +3,7 @@
 declare -A configurations
 
 declare -A EXTRA_MODULE_FLAGS
-EXTRA_MODULE_FLAGS[opm-simulators]="-DBUILD_FLOW_VARIANTS=ON -DOPM_ENABLE_PYTHON=ON -DBUILD_FLOW_POLY_GRID=ON"
+EXTRA_MODULE_FLAGS[opm-simulators]="-DBUILD_EBOS_EXTENSIONS=ON -DBUILD_EBOS_DEBUG_EXTENSIONS=ON -DBUILD_FLOW_VARIANTS=ON -DOPM_ENABLE_PYTHON=ON"
 EXTRA_MODULE_FLAGS[opm-common]="-DOPM_ENABLE_PYTHON=ON -DOPM_ENABLE_EMBEDDED_PYTHON=ON -DOPM_INSTALL_PYTHON=ON"
 
 # Parse revisions from trigger comment and setup arrays
@@ -16,12 +16,7 @@ function parseRevisions {
   do
     if grep -qi "$upstream=" <<< $ghprbCommentBody
     then
-      if test -n "$absolute_revisions"
-      then
-        upstreamRev[$upstream]=`echo $ghprbCommentBody | sed -r "s/.*${upstream,,}=([^ ]+).*/\1/g"`
-      else
-        upstreamRev[$upstream]=pull/`echo $ghprbCommentBody | sed -r "s/.*${upstream,,}=([0-9]+).*/\1/g"`/merge
-      fi
+      upstreamRev[$upstream]=pull/`echo $ghprbCommentBody | sed -r "s/.*${upstream,,}=([0-9]+).*/\1/g"`/merge
     fi
   done
   if grep -q "with downstreams" <<< $ghprbCommentBody
@@ -30,13 +25,8 @@ function parseRevisions {
     do
       if grep -qi "$downstream=" <<< $ghprbCommentBody
       then
-        if test -n "$absolute_revisions"
-        then
-          downstreamRev[$downstream]=`echo $ghprbCommentBody | sed -r "s/.*${downstream,,}=([^ ]+).*/\1/g"`
-        else
-          downstreamRev[$downstream]=pull/`echo $ghprbCommentBody | sed -r "s/.*${downstream,,}=([0-9]+).*/\1/g"`/merge
-       fi
-     fi
+        downstreamRev[$downstream]=pull/`echo $ghprbCommentBody | sed -r "s/.*${downstream,,}=([0-9]+).*/\1/g"`/merge
+      fi
     done
   fi
 
@@ -232,12 +222,8 @@ function build_downstreams {
 
 # $1 = Name of main module
 function build_module_full {
-  PY_MAJOR=`python3 --version | awk -F ' ' '{print $2}' | awk -F '.' '{print $1}'`
-  PY_MINOR=`python3 --version | awk -F ' ' '{print $2}' | awk -F '.' '{print $2}'`
   for configuration in ${!configurations[@]}
   do
-    export PYTHONPATH="$WORKSPACE/$configuration/install/lib/python$PY_MAJOR.$PY_MINOR/site-packages"
-
     # Build upstream modules
     build_upstreams
 

jenkins/setup-opm-tests.sh

@@ -14,9 +14,6 @@ then
     if ! test -d $WORKSPACE/deps/opm-tests
     then
       cp $OPM_TESTS_ROOT_PREDEFINED $WORKSPACE/deps/opm-tests -R
-      pushd $WORKSPACE/deps/opm-tests
-      echo "opm-tests revision: `git rev-parse HEAD`"
-      popd
     fi
   else
     # We need a full repo checkout
@@ -32,9 +29,6 @@ else
   if ! test -d $WORKSPACE/deps/opm-tests
   then
     cp $OPM_TESTS_ROOT $WORKSPACE/deps/opm-tests -R
-    pushd $WORKSPACE/deps/opm-tests
-    echo "opm-tests-revision: `git rev-parse HEAD`"
-    popd
   fi
 fi
 OPM_TESTS_ROOT=$WORKSPACE/deps/opm-tests

jenkins/update-opm-tests.sh

@@ -22,7 +22,6 @@ upstreamRev[opm-grid]=master
 upstreamRev[opm-models]=master
 upstreamRev[opm-simulators]=master
 upstreamRev[opm-upscaling]=master
-upstreamRev[opm-tests]=master
 
 # Setup revision tables
 parseRevisions
@@ -38,20 +37,14 @@ do
     prnumber=${rev//[!0-9]/}
     BRANCH_NAME="${BRANCH_NAME}_${repo}_$prnumber"
     test -n "$REASON" && REASON+="        "
-    REASON+="PR https://github.com/OPM/$repo/pull/$prnumber\n"
+    REASON+="https://github.com/OPM/$repo/pull/$prnumber\n"
   fi
 done
 
 # Do the commit
 export REASON
-if [ "${upstreamRev[opm-tests]}" == "master" ]
-then
-  export BRANCH_BASE=origin/master
-else
-  export BRANCH_BASE=${upstreamRev[opm-tests]}
-fi
 export BRANCH_NAME
-$WORKSPACE/deps/opm-simulators/tests/update_reference_data.sh $OPM_TESTS_ROOT $WORKSPACE/$configuration/build-opm-simulators $WORKSPACE/$configuration/install/bin/convertECL
+$WORKSPACE/deps/opm-simulators/tests/update_reference_data.sh $OPM_TESTS_ROOT
 if test $? -eq 5
 then
   echo "No tests failed - no data to update. Exiting"
@@ -97,7 +90,7 @@ fi
 
 if [ -n "$DATA_PR" ]
 then
-  curl -d "{ \"body\": \"Existing PR https://github.com/OPM/opm-tests/pull/$DATA_PR was updated\" }" -H "Authorization: token ${GH_TOKEN}" -X POST https://api.github.com/repos/OPM/$MAIN_REPO/issues/$PRNUMBER/comments
+  curl -d "{ \"body\": \"Existing PR https://github.com/OPM/opm-tests/pull/$DATA_PR was updated\" }" -X POST https://api.github.com/repos/OPM/$MAIN_REPO/issues/$PRNUMBER/comments?access_token=$GH_TOKEN
 else
   git-open-pull -u jenkins4opm --base-account OPM --base-repo opm-tests -r /tmp/cmsg $BRANCH_NAME
 fi

msim/include/opm/msim/msim.hpp

@@ -1,20 +1,19 @@
 #ifndef ISIM_MAIN_HPP
 #define ISIM_MAIN_HPP
 
-#include <chrono>
 #include <functional>
-#include <map>
 #include <string>
+#include <map>
 
-#include <opm/input/eclipse/Schedule/SummaryState.hpp>
-#include <opm/input/eclipse/EclipseState/EclipseState.hpp>
-#include <opm/input/eclipse/Schedule/Schedule.hpp>
-#include <opm/input/eclipse/Schedule/Action/State.hpp>
+#include <opm/parser/eclipse/Parser/ErrorGuard.hpp>
+#include <opm/parser/eclipse/Deck/Deck.hpp>
+#include <opm/parser/eclipse/EclipseState/EclipseState.hpp>
+#include <opm/parser/eclipse/EclipseState/EclipseState.hpp>
+#include <opm/parser/eclipse/EclipseState/SummaryConfig/SummaryConfig.hpp>
+#include <opm/parser/eclipse/EclipseState/Schedule/Schedule.hpp>
 
 #include <opm/output/data/Solution.hpp>
 #include <opm/output/data/Wells.hpp>
-#include <opm/output/data/Groups.hpp>
-#include <opm/input/eclipse/Deck/UDAValue.hpp>
 
 
 namespace Opm {
@@ -23,39 +22,29 @@ class EclipseIO;
 class ParseContext;
 class Parser;
 class Python;
-class UDQState;
-class WellTestState;
-
+class SummaryState;
 class msim {
 
 public:
     using well_rate_function = double(const EclipseState&, const Schedule&, const SummaryState& st, const data::Solution&, size_t report_step, double seconds_elapsed);
     using solution_function = void(const EclipseState&, const Schedule&, data::Solution&, size_t report_step, double seconds_elapsed);
 
-    msim(const EclipseState& state, const Schedule& schedule_arg);
-
-    Opm::UDAValue uda_val();
+    msim(const EclipseState& state);
 
     void well_rate(const std::string& well, data::Rates::opt rate, std::function<well_rate_function> func);
     void solution(const std::string& field, std::function<solution_function> func);
-    void run(EclipseIO& io, bool report_only);
-    void post_step(data::Solution& sol, data::Wells& well_data, data::GroupAndNetworkValues& group_nwrk_data, size_t report_step, const time_point& sim_time);
-
+    void run(Schedule& schedule, EclipseIO& io, bool report_only);
+    void post_step(Schedule& schedule, SummaryState& st, data::Solution& sol, data::Wells& well_data, size_t report_step);
 private:
 
-    void run_step(WellTestState& wtest_state, UDQState& udq_state, data::Solution& sol, data::Wells& well_data, data::GroupAndNetworkValues& group_nwrk_data, size_t report_step, EclipseIO& io);
-    void run_step(WellTestState& wtest_state, UDQState& udq_state, data::Solution& sol, data::Wells& well_data, data::GroupAndNetworkValues& group_nwrk_data, size_t report_step, double dt, EclipseIO& io);
-    void output(WellTestState& wtest_state, const UDQState& udq_state, size_t report_step, bool substep, double seconds_elapsed, const data::Solution& sol, const data::Wells& well_data, const data::GroupAndNetworkValues& group_data, EclipseIO& io);
-    void simulate(data::Solution& sol, data::Wells& well_data, data::GroupAndNetworkValues& group_nwrk_data, size_t report_step, double seconds_elapsed, double time_step);
+    void run_step(const Schedule& schedule, SummaryState& st, data::Solution& sol, data::Wells& well_data, size_t report_step, EclipseIO& io) const;
+    void run_step(const Schedule& schedule, SummaryState& st, data::Solution& sol, data::Wells& well_data, size_t report_step, double dt, EclipseIO& io) const;
+    void output(SummaryState& st, size_t report_step, bool substep, double seconds_elapsed, const data::Solution& sol, const data::Wells& well_data, EclipseIO& io) const;
+    void simulate(const Schedule& schedule, const SummaryState& st, data::Solution& sol, data::Wells& well_data, size_t report_step, double seconds_elapsed, double time_step) const;
 
     EclipseState state;
     std::map<std::string, std::map<data::Rates::opt, std::function<well_rate_function>>> well_rates;
     std::map<std::string, std::function<solution_function>> solutions;
-
-public:
-    Schedule schedule;
-    Action::State action_state;
-    SummaryState st;
 };
 }
 

msim/src/msim.cpp

@@ -18,91 +18,79 @@
 */
 
 #include <iostream>
-#include <utility>
 
-#include <opm/output/eclipse/Inplace.hpp>
 #include <opm/output/eclipse/EclipseIO.hpp>
 #include <opm/output/eclipse/RestartValue.hpp>
 #include <opm/output/eclipse/Summary.hpp>
 #include <opm/output/data/Solution.hpp>
 #include <opm/output/data/Wells.hpp>
 #include <opm/output/data/Groups.hpp>
-#include <opm/input/eclipse/Python/Python.hpp>
+#include <opm/parser/eclipse/Python/Python.hpp>
 
-#include <opm/input/eclipse/Schedule/Action/ActionContext.hpp>
-#include <opm/input/eclipse/Schedule/UDQ/UDQState.hpp>
-#include <opm/input/eclipse/Schedule/UDQ/UDQConfig.hpp>
-#include <opm/input/eclipse/Schedule/Well/WellTestState.hpp>
-#include <opm/input/eclipse/Parser/Parser.hpp>
-#include <opm/input/eclipse/Parser/ParseContext.hpp>
-#include <opm/input/eclipse/Parser/ErrorGuard.hpp>
+#include <opm/parser/eclipse/EclipseState/Schedule/SummaryState.hpp>
+#include <opm/parser/eclipse/EclipseState/Schedule/Action/ActionContext.hpp>
+#include <opm/parser/eclipse/Parser/Parser.hpp>
+#include <opm/parser/eclipse/Parser/ParseContext.hpp>
+#include <opm/parser/eclipse/Parser/ErrorGuard.hpp>
 #include <opm/msim/msim.hpp>
 
 namespace Opm {
 
-msim::msim(const EclipseState& state_arg, const Schedule& schedule_arg)
-    : state(state_arg)
-    , schedule(schedule_arg)
-    , st(TimeService::from_time_t(this->schedule.getStartTime()))
+msim::msim(const EclipseState& state_arg) :
+    state(state_arg)
 {}
 
-void msim::run(EclipseIO& io, bool report_only) {
+void msim::run(Schedule& schedule, EclipseIO& io, bool report_only) {
     const double week = 7 * 86400;
     data::Solution sol;
-    UDQState udq_state(this->schedule.getUDQConfig(0).params().undefinedValue());
-    WellTestState wtest_state;
+    SummaryState st(std::chrono::system_clock::from_time_t(schedule.getStartTime()));
     Python python;
 
     io.writeInitial();
     for (size_t report_step = 1; report_step < schedule.size(); report_step++) {
         data::Wells well_data;
-        data::GroupAndNetworkValues group_nwrk_data;
         if (report_only)
-            run_step(wtest_state, udq_state, sol, well_data, group_nwrk_data, report_step, io);
+            run_step(schedule, st, sol, well_data, report_step, io);
         else {
             double time_step = std::min(week, 0.5*schedule.stepLength(report_step - 1));
-            run_step(wtest_state, udq_state, sol, well_data, group_nwrk_data, report_step, time_step, io);
+            run_step(schedule, st, sol, well_data, report_step, time_step, io);
         }
-        auto sim_time = TimeService::from_time_t( schedule.simTime(report_step) );
-        post_step(sol, well_data, group_nwrk_data, report_step, sim_time);
+        post_step(schedule, st, sol, well_data, report_step);
         const auto& exit_status = schedule.exitStatus();
         if (exit_status.has_value())
             return;
     }
 }
 
-UDAValue msim::uda_val() {
- return UDAValue();
-}
 
-
-void msim::post_step(data::Solution& /* sol */, data::Wells& /* well_data */, data::GroupAndNetworkValues& /* grp_nwrk_data */, size_t report_step, const time_point& sim_time) {
-    const auto& actions = this->schedule[report_step].actions.get();
+void msim::post_step(Schedule& schedule, SummaryState& st, data::Solution& /* sol */, data::Wells& /* well_data */, size_t report_step) {
+    const auto& actions = schedule.actions(report_step);
     if (actions.empty())
         return;
 
-    Action::Context context( this->st , this->schedule[report_step].wlist_manager.get());
+    Action::Context context( st );
 
-    for (const auto& action : actions.pending(this->action_state, std::chrono::system_clock::to_time_t(sim_time))) {
-        auto result = action->eval(context);
+    auto sim_time = schedule.simTime(report_step);
+    for (const auto& action : actions.pending(sim_time)) {
+        auto result = action->eval(sim_time, context);
         if (result)
-            this->schedule.applyAction(report_step, *action, result.wells(), {});
+            schedule.applyAction(report_step, *action, result);
     }
 
-    for (const auto& pyaction : actions.pending_python(this->action_state))
-        this->schedule.runPyAction(report_step, *pyaction, this->action_state, this->state, this->st);
+    for (const auto& pyaction : actions.pending_python())
+        pyaction->run(this->state, schedule, report_step, st);
 }
 
 
 
-void msim::run_step(WellTestState& wtest_state, UDQState& udq_state, data::Solution& sol, data::Wells& well_data, data::GroupAndNetworkValues& grp_nwrk_data, size_t report_step, EclipseIO& io) {
-    this->run_step(wtest_state, udq_state, sol, well_data, grp_nwrk_data, report_step, schedule.stepLength(report_step - 1), io);
+void msim::run_step(const Schedule& schedule, SummaryState& st, data::Solution& sol, data::Wells& well_data, size_t report_step, EclipseIO& io) const {
+    this->run_step(schedule, st, sol, well_data, report_step, schedule.stepLength(report_step - 1), io);
 }
 
 
-void msim::run_step(WellTestState& wtest_state, UDQState& udq_state, data::Solution& sol, data::Wells& well_data, data::GroupAndNetworkValues& group_nwrk_data, size_t report_step, double dt, EclipseIO& io) {
-    double start_time = this->schedule.seconds(report_step - 1);
-    double end_time = this->schedule.seconds(report_step);
+void msim::run_step(const Schedule& schedule, SummaryState& st, data::Solution& sol, data::Wells& well_data, size_t report_step, double dt, EclipseIO& io) const {
+    double start_time = schedule.seconds(report_step - 1);
+    double end_time = schedule.seconds(report_step);
     double seconds_elapsed = start_time;
 
     while (seconds_elapsed < end_time) {
@@ -110,69 +98,61 @@ void msim::run_step(WellTestState& wtest_state, UDQState& udq_state, data::Solut
         if ((seconds_elapsed + time_step) > end_time)
             time_step = end_time - seconds_elapsed;
 
-        this->simulate(sol, well_data, group_nwrk_data, report_step, seconds_elapsed, time_step);
+        this->simulate(schedule, st, sol, well_data, report_step, seconds_elapsed, time_step);
+
+        Opm::data::Group group_data;
 
         seconds_elapsed += time_step;
 
-        io.summary().eval(this->st,
+        io.summary().eval(st,
                           report_step,
                           seconds_elapsed,
+                          this->state,
+                          schedule,
                           well_data,
-                          group_nwrk_data,
-                          {},
-                          {},
-                          {},
+                          group_data,
                           {});
 
-        this->schedule.getUDQConfig( report_step ).eval(report_step, schedule.wellMatcher(report_step), this->st, udq_state);
-
-        this->output(wtest_state,
-                     udq_state,
+        this->output(st,
                      report_step,
                      (seconds_elapsed < end_time),
                      seconds_elapsed,
                      sol,
                      well_data,
-                     group_nwrk_data,
                      io);
     }
 }
 
 
 
-void msim::output(WellTestState& wtest_state, const UDQState& udq_state, size_t report_step, bool substep, double seconds_elapsed, const data::Solution& sol, const data::Wells& well_data, const data::GroupAndNetworkValues& group_nwrk_data, EclipseIO& io) {
-    RestartValue value(sol, well_data, group_nwrk_data, {});
-    io.writeTimeStep(this->action_state,
-                     wtest_state,
-                     this->st,
-                     udq_state,
+void msim::output(SummaryState& st, size_t report_step, bool substep, double seconds_elapsed, const data::Solution& sol, const data::Wells& well_data, EclipseIO& io) const {
+    RestartValue value(sol, well_data);
+    io.writeTimeStep(st,
                      report_step,
                      substep,
                      seconds_elapsed,
-                     std::move(value));
+                     value);
 }
 
 
-void msim::simulate(data::Solution& sol, data::Wells& well_data, data::GroupAndNetworkValues& /* group_nwrk_data */, size_t report_step, double seconds_elapsed, double time_step) {
+void msim::simulate(const Schedule& schedule, const SummaryState& st, data::Solution& sol, data::Wells& well_data, size_t report_step, double seconds_elapsed, double time_step) const {
     for (const auto& sol_pair : this->solutions) {
         auto func = sol_pair.second;
-        func(this->state, this->schedule, sol, report_step, seconds_elapsed + time_step);
+        func(this->state, schedule, sol, report_step, seconds_elapsed + time_step);
     }
 
     for (const auto& well_pair : this->well_rates) {
         const std::string& well_name = well_pair.first;
-        const auto& sched_well = this->schedule.getWell(well_name, report_step);
-        bool well_open = (sched_well.getStatus() == Well::Status::OPEN);
+        const auto& sched_well = schedule.getWell(well_name, report_step);
+        if (sched_well.getStatus() != Well::Status::OPEN)
+            continue;
 
         data::Well& well = well_data[well_name];
         for (const auto& rate_pair : well_pair.second) {
             auto rate = rate_pair.first;
             auto func = rate_pair.second;
 
-            if (well_open)
-                well.rates.set(rate, func(this->state, this->schedule, this->st, sol, report_step, seconds_elapsed + time_step));
-            else
-                well.rates.set(rate, 0.0);
+            well.rates.set(rate, func(this->state, schedule, st, sol, report_step, seconds_elapsed + time_step));
         }
 
         // This is complete bogus; a temporary fix to pass an assert() in the

opm-common-prereqs.cmake

@@ -16,10 +16,6 @@ list(APPEND opm-common_DEPS
       # various runtime library enhancements
       "Boost 1.44.0 COMPONENTS system unit_test_framework REQUIRED"
       "OpenMP QUIET"
-      "cjson"
-      # Still it produces compile errors complaining that it
-      # cannot format UDQVarType. Hence we use the same version
-      # as the embedded one.
-      "fmt 7.0.3"
 )
+
 find_package_deps(opm-common)

opm/common/ErrorMacros.hpp

@@ -49,22 +49,22 @@
 // std::runtime_error.
 //
 // Usage: OPM_THROW(ExceptionClass, "Error message " << value);
-#define OPM_THROW(Exception, message)                                                        \
-    do {                                                                                     \
-        std::ostringstream opmErrorMacroOStringStream;                                       \
-        opmErrorMacroOStringStream << "[" << __FILE__ << ":" << __LINE__ << "] " << message; \
-        ::Opm::OpmLog::error(opmErrorMacroOStringStream.str());                              \
-        throw Exception(opmErrorMacroOStringStream.str());                                   \
+#define OPM_THROW(Exception, message)                                   \
+    do {                                                                \
+        std::ostringstream oss__;                                       \
+        oss__ << "[" << __FILE__ << ":" << __LINE__ << "] " << message; \
+        Opm::OpmLog::error(oss__.str());                                \
+        throw Exception(oss__.str());                                   \
     } while (false)
 
 // Same as OPM_THROW, except for not making an OpmLog::error() call.
 //
 // Usage: OPM_THROW_NOLOG(ExceptionClass, "Error message " << value);
-#define OPM_THROW_NOLOG(Exception, message)                                                  \
-    do {                                                                                     \
-        std::ostringstream opmErrorMacroOStringStream;                                       \
-        opmErrorMacroOStringStream << "[" << __FILE__ << ":" << __LINE__ << "] " << message; \
-        throw Exception(opmErrorMacroOStringStream.str());                                   \
+#define OPM_THROW_NOLOG(Exception, message)                             \
+    do {                                                                \
+        std::ostringstream oss__;                                       \
+        oss__ << "[" << __FILE__ << ":" << __LINE__ << "] " << message; \
+        throw Exception(oss__.str());                                   \
     } while (false)
 
 // throw an exception if a condition is true