Joakim Hove
b34c161805
Use WellContainer<double> for RS / RV
2021-05-24 10:01:00 +02:00
Joakim Hove
89a712603f
Use well index for misc perforation data
2021-05-24 09:14:36 +02:00
Joakim Hove
d6151e2f00
Use well index for perf water throughput
2021-05-24 09:14:36 +02:00
Joakim Hove
2f901f1012
Use well index when iterating over brine perforation rates
2021-05-24 09:14:36 +02:00
Joakim Hove
f9e142dc8d
Use well index when iterating over polymer perforation rates
2021-05-24 09:14:36 +02:00
Joakim Hove
5437cfa37a
Use well index when iterating over solvent perf rates
2021-05-24 09:14:36 +02:00
Arne Morten Kvarving
1614767362
GasLiftSingleWell: split typetag independent code to separate class
2021-05-21 09:09:10 +02:00
Joakim Hove
506a349085
Use wellcontainer2 ( #3255 )
...
Use WellContainer<> to manage members in WellState
2021-05-20 16:16:12 +02:00
Joakim Hove
b0458cee33
Merge pull request #3268 from joakim-hove/wellstate-iget
...
Wellstate iget
2021-05-19 14:29:26 +02:00
Joakim Hove
6af03f4a6a
Update WellState::thp()
2021-05-19 10:05:11 +02:00
Joakim Hove
3ec7feba75
Update WellState::bhp()
2021-05-19 10:05:11 +02:00
Arne Morten Kvarving
bcfab1fed3
use if constexpr to eliminate some brine code
2021-05-18 15:04:47 +02:00
Arne Morten Kvarving
db668e8d80
make has_energy constexpr and use if constexpr to eliminate code
2021-05-18 15:04:47 +02:00
Arne Morten Kvarving
268201eeb1
make has_polymermw constexpr and use if constexpr to eliminate code
2021-05-18 15:04:47 +02:00
Arne Morten Kvarving
dd04eb128a
use if constexpr to eliminate some zFraction code
2021-05-18 10:18:11 +02:00
Arne Morten Kvarving
83595d84c3
use if constexpr to eliminate some polymer code
2021-05-18 10:18:11 +02:00
Arne Morten Kvarving
1fa74b5889
use if constexpr to eliminate some foam code
2021-05-18 10:18:11 +02:00
Arne Morten Kvarving
6157122bd8
use if constexpr to eliminate some solvent code
2021-05-18 10:17:21 +02:00
Joakim Hove
b5580f39fa
Let the perforation index run over the indices for one well
2021-05-11 22:38:11 +02:00
Joakim Hove
846809ec29
Rename mutable perfPhaseRates()
2021-05-11 18:48:05 +02:00
Tor Harald Sandve
80413e0794
add useInnerIteration method and move assembleWellEq to the well interface to avoid code duplication
2021-05-10 09:41:18 +02:00
Tor Harald Sandve
eeb1b7e36c
Initialize empty producers using the mobility ratio and the transmissbility ratio
2021-05-05 08:31:36 +02:00
Tor Harald Sandve
70150ab212
Remove code duplication between STW and MSW
2021-04-30 09:27:35 +02:00
Joakim Hove
e1d117c59f
Extract group state and create WGState to manage well & group state
2021-04-27 10:55:38 +02:00
Tor Harald Sandve
12880be916
Merge pull request #3159 from totto82/updateWellTargetFix
...
get bhp from thp without solving
2021-04-26 13:15:30 +02:00
Tor Harald Sandve
ebcaea3faa
get bhp from thp without solving
2021-04-14 15:58:58 +02:00
Tor Harald Sandve
9d56588906
Make gaslift parallel
2021-04-14 14:14:39 +02:00
Håkon Hægland
a80ad54d7d
Parallel runs not supported yet.
...
Gives a warning if gas lift optimization is attempted for more than one
process in the MPI communicator. The plan is to implement support for
muliple processes in a later commit.
2021-03-30 15:42:33 +02:00
Håkon Hægland
434640fdf5
Implements gas lift optimization for groups.
...
Extends PR #2824 to include support for GLIFTOPT (item 2, maximum lift
gas supply for a group) and group production constraints.
The optimization is split into two phases. First the wells are optimized
separately (as in PR #2824 ). In this phase LIFTOPT and WLIFTOPT constraints
(e.g. maxmimum lift gas injection for a well, minimum economic gradient) are
considered together with well production constraints.
Then, in the next phase the wells are optimized in groups. Here, the ALQ
distribution from the first phase is used as a starting point. If a group
has any production rate constraints, and/or a limit on its total rate of
lift gas supply, lift gas is redistributed to the wells that gain the most
benefit from it by considering which wells that currently has the largest
weighted incremental gradient (i.e. increase in oil rate compared to
increase in ALQ).
2021-03-30 15:41:46 +02:00
Tor Harald Sandve
8283b53f3b
only compute Bavg once pr timestep and use the stored variable instead of passing it around
2021-03-23 15:30:36 +01:00
Joakim Hove
9662d4019e
Use enum Well::Status to indicate well status instead of bool
2021-03-20 20:33:28 +01:00
Bård Skaflestad
65edfb702c
Preparations for Recording Dynamic Well State
...
Coalesce blocks with same conditions, split long lines, and apply
'const' where appropriate. While here, also tighten the "rate = 0"
criterion to include denormalised numbers.
2021-03-18 17:28:28 +01:00
Joakim Hove
fda1d65494
Pass table argument to VFP getFLo()
2021-02-15 22:21:56 +01:00
Joakim Hove
e4789d4eb7
Use std::reference_wrapper for VFP tables
2021-01-26 07:56:59 +01:00
Tor Harald Sandve
036a021c63
fix well model for gasoil thermal
2021-01-21 11:37:25 +01:00
Atgeirr Flø Rasmussen
3a0dbdc6e7
Merge pull request #2993 from blattms/stdwell-comm-rebase-split-cont-clean
...
Final fixes to make distributed wells work for Norne.
2021-01-15 15:42:45 +01:00
Kai Bao
286a7d2e5b
Merge pull request #3002 from totto82/moveWellOpCheck
...
move well operability check for STW
2021-01-08 11:28:35 +01:00
Joakim Hove
c1e10d81ba
Use ScheduleState to access nupcol
2021-01-06 15:10:05 +01:00
Tor Harald Sandve
5ee75c45e3
move well operability check for STW
2021-01-05 15:10:40 +01:00
Markus Blatt
5b943761d7
Fixes StandardWell::computeConnectionDensities.
...
This computation is serial and needs a complete representation
of data attached to all preforations (even those stored on
another process). This commit uses the newly created factory to
correctly compute the connection densities for distributed wells.
2020-12-18 14:48:19 +01:00
Markus Blatt
4dff6fb168
Fixes StandardWell::updateProductivityIndex for distributed wells.
2020-12-18 14:48:19 +01:00
Markus Blatt
12f5a6aaff
Fixes StandardWell::allDrawDownWrongDirection for distributed wells.
2020-12-18 14:48:19 +01:00
Markus Blatt
ba1feadb63
Added missing parallel reduction to computeCurrentWellRates.
...
This is supposed to be summation over values at all perforations.
Hence, it needs a parallel sum.
2020-12-18 14:48:19 +01:00
Markus Blatt
fc4a7fa3c1
Fixes StandardWell::updateIPR for distributed wells.
...
Of course the summation needs to be over all perforations of the
wells, no matter where they reside. Hence we need communication.
2020-12-18 14:48:19 +01:00
Markus Blatt
c09797355d
Sum well rates in computeWellRatesWithBhp for distributed wells.
...
This needs summation over all procs that share the well as it needs
information from all perforations. Some of them might reside on other
processes.
2020-12-18 14:48:19 +01:00
Markus Blatt
c0c1897ea9
Fix computeConnectionPressureDelta for distributed wells.
...
As this is as sequential (ordering matters!) as it can get we need to
communicate all perforations, do the partial sum with them and save
result back to the local perforations.
2020-12-10 11:32:52 +01:00
Atgeirr Flø Rasmussen
6e87ec6266
Merge pull request #2955 from blattms/stdwell-comm-rebase-split-pwell-info
...
Last part of current distributed standard wells.
2020-12-10 08:56:00 +01:00
Tor Harald Sandve
a7664f9ea6
Add check for operability of MSW
2020-12-08 12:38:25 +01:00
Markus Blatt
f7ed1b21fa
Determine pressure and depth above for distributed wells.
2020-12-07 16:32:33 +01:00
Markus Blatt
2e5b1c8d54
Use reference for WellInterface::parallel_well_info_
2020-12-04 13:24:31 +01:00
