1302 Commits

Author	SHA1	Message	Date
Tor Harald Sandve	969dff4ede	Merge pull request #3864 from totto82/regMSW ... regularize MSW equation when iter > strict_inner_iter	2022-04-21 09:15:15 +02:00
Tor Harald Sandve	03c1884533	Merge pull request #3873 from totto82/aprox_thp ... tighten approximated solution bhpFromThpLimit from 3 to 0.1 bar	2022-04-21 08:56:57 +02:00
Tor Harald Sandve	fd6cf1ccbd	regularize MSW equation when iter > strict_inner_iter	2022-04-21 08:44:50 +02:00
Håkon Hægland	9d04895ddb	Fix assertion error for 2p oil water ... VFP calculations for two phase gas lift does not work unless the rates are adpated to include a zero gas rate.	2022-04-20 21:47:15 +02:00
Håkon Hægland	11907495c1	Well testing of gas lift wells ... Assign a maximum ALQ value to each GLIFT producer when doing well testing in beginTimeStep(). This allows the well to be considered open. Then, later in the timestep, when assemble() is called, the full gas lift optimization procedure can adjust the ALQ to its correct value. It is also observed that in some cases when gas lift is switched off by setting ALQ to zero, and later in the schedule is switched back on again, it might not be possible to determine bhp from thp for low small ALQ values. Instead of aborting the gas lift optimization, we should try increasing ALQ until we get convergence or until the maximum ALQ for the well is reached.	2022-04-20 10:51:34 +02:00
Tor Harald Sandve	a1d11540a6	tighten approximated solution bhpFromThpLimit from 3 to 0.1 bar	2022-04-19 14:21:20 +02:00
Tor Harald Sandve	edf8786a58	avoid throw for nan residuals instead return well as unconverged	2022-04-11 09:52:25 +02:00
Markus Blatt	ff410d268a	Merge pull request #3863 from totto82/unsolvable_fix ... fix to --shut-unsolvable-wells=true option	2022-04-11 07:33:46 +02:00
Tor Harald Sandve	6f29bf715c	Merge pull request #3778 from GitPaean/always_inner ... [testing] always using inner iterations for testing purpose.	2022-04-08 15:44:33 +02:00
Tor Harald Sandve	e501a84958	support item 4 wvfpexp	2022-04-08 08:43:13 +02:00
Tor Harald Sandve	e2e0ec9dd9	fix to --shut-unsolvable-wells=true option	2022-04-05 14:42:27 +02:00
Tor Harald Sandve	fba9046201	Some more clean-up based on review	2022-04-04 11:37:31 +02:00
Tor Harald Sandve	69ffed06de	Address comments from review ... 1) Add debug messages 2) Fix bug of missing else in the code	2022-04-04 08:24:32 +02:00
Tor Harald Sandve	5b53fcd8a6	guard against d = 0	2022-04-04 08:24:32 +02:00
Tor Harald Sandve	2e91d2f353	Do not throw when d = 0 instead continue with rs/rv = 0	2022-04-04 08:24:32 +02:00
Atgeirr Flø Rasmussen	245a87e296	Merge pull request #3851 from totto82/doublecheckecon ... Avoid premature closing of wells due to econ limits	2022-04-01 10:01:47 +02:00
Kai Bao	aa633ff98f	reconstructing the if structure for has_energy ... in StandardWell<TypeTag>:: calculateSinglePerf()	2022-03-31 22:38:55 +02:00
Tor Harald Sandve	8909b259d0	don't shut wells due to ratio when rate is negative	2022-03-28 10:50:15 +02:00
Tor Harald Sandve	71acf4e056	Double check econ potential limits ... Sometimes the potentials are inaccurate as a safty measure we also check that the rates are violated. The rates are supposed to be less or equal to the potentials.	2022-03-28 10:50:15 +02:00
Bård Skaflestad	0cd2ce6589	Merge pull request #3824 from totto82/notswitchthp ... Avoid switching to thp control if production is decreasing or injection is increasing	2022-03-25 14:34:30 +01:00
Tor Harald Sandve	f4d81e33f1	Avoid switching to thp control if it results in higher rates	2022-03-25 09:12:15 +01:00
Tor Harald Sandve	2d6794f077	Merge pull request #3849 from hakonhagland/glift_debug_rank ... Cleanup gaslift debugging output code	2022-03-24 14:13:33 +01:00
Håkon Hægland	a3c131955f	Omit one redundant debugging message	2022-03-24 13:47:57 +01:00
Håkon Hægland	fbd6c03dd6	Cleanup glift debugging output code	2022-03-24 12:42:46 +01:00
Tor Harald Sandve	32dfdc6198	improve initialization msw new wells	2022-03-24 09:53:46 +01:00
Tor Harald Sandve	519b5dd8cc	Merge pull request #3810 from totto82/refactor_bhpFromThpLimit_1 ... Refactor bhp from thp limit	2022-03-22 13:57:52 +01:00
Tor Harald Sandve	c067e5fafd	Merge pull request #3834 from totto82/avoid_closing ... Handle case where bhp target is violated	2022-03-22 11:56:21 +01:00
Tor Harald Sandve	7d5a0a74eb	Handle case where bhp target is violated	2022-03-21 09:52:41 +01:00
Kai Bao	e05a0b276e	fixing the scaling of segment rates ... when initial segment rate is zero.	2022-03-14 14:01:24 +01:00
Kai Bao	ccfd4152d3	using addition to update segment pressure ... when bhp is changed. It is much safer and more reasonable. using multiplication is more likely to result in dramatic values.	2022-03-09 14:23:59 +01:00
Håkon Hægland	3cf181b2ee	Throw exception instead of using assert ... Throw an exception if two-phase gas lift optimization is used for other phases than oil and water.	2022-03-07 15:58:11 +01:00
Håkon Hægland	438a712e54	Gas lift optimization for two-phase oil-water. ... Add gas lift optimization support for two-phase oil-water flow.	2022-03-07 15:19:43 +01:00
Tor Harald Sandve	8cfbe1d791	Merge pull request #3816 from totto82/control_well_testing ... Set well control to thp or bhp in well testing	2022-02-23 10:36:17 +01:00
Markus Blatt	1d44a4beac	Merge pull request #3817 from bska/fix-pedantic-warning ... Remove Extraneous Semicolon	2022-02-18 10:10:44 +01:00
Bård Skaflestad	e1d55d4017	Remove Extraneous Semicolon ... This generates warnings when using GCC's "-Wpedantic" option.	2022-02-17 23:13:31 +01:00
Tor Harald Sandve	b931c5ef97	Check if guiderate is violated ... If guiderate is violated change to group controll. Note that a factor 1.01 is added to minimize oscilations. Fix missing multiplication with group efficiency when accumulating guiderates	2022-02-17 10:41:43 +01:00
Tor Harald Sandve	d8934ea7a9	Set well control to thp or bhp in well testing	2022-02-17 09:01:32 +01:00
Tor Harald Sandve	418880730e	cleanup2	2022-02-15 12:43:58 +01:00
Tor Harald Sandve	cb99a2fc74	check also the validity of the iterated solution	2022-02-15 12:39:42 +01:00
Tor Harald Sandve	650416c647	cleanup	2022-02-15 12:39:42 +01:00
Tor Harald Sandve	e0573e99b1	iterate in computeBhpAtThpLimitProdWithAlq if no solution or potentials are negative	2022-02-15 12:39:42 +01:00
Tor Harald Sandve	ec08f80405	Refactor out the solving algorithm of bhp from thp via VFP to make it usable for injectors	2022-02-15 12:39:42 +01:00
Tor Harald Sandve	1001d35418	Move computeBhpAtThpLimitProd MSW code to common and apply it for both MSW and STW ... The computeBhpAtThpLimitProd for MSW is faster and sufficiently robust and should also be used by STW	2022-02-15 12:39:42 +01:00
Håkon Hægland	c7aa43a82b	Rename some methods and variables. ... Renames some methods and variables to reflect that the well is no longer necessarily a StandardWell. It can be either a MultisegmentWell or a StandardWell. This should avoid confusion about the nature of the variable.	2022-02-15 10:21:09 +01:00
Håkon Hægland	54160827de	Add gaslift optimization support for MSW. ... Implements gas lift optimization support for multisegmented wells (MSW).	2022-02-14 21:38:50 +01:00
Tor Harald Sandve	0c8d0764d6	update well potensials in well state along with alq and update guide rates accordingly	2022-02-08 15:46:08 +01:00
Tor Harald Sandve	bb99d1437b	reduce alq when alq + gas production target is violated	2022-02-03 12:11:03 +01:00
Tor Harald Sandve	0b923e505a	Add support for maximum total gas (alq + gas rate) in GLIFTOPT ... Dont increase gaslift if the groups alq + gas production rate is above the given target	2022-02-02 10:54:32 +01:00
Tor Harald Sandve	009134d037	Limit well rates to honor group rates ... If a well is under a group that is limited by a target, it should use as little gaslift as possible. The reduction algorithm will reduce the gaslift of the well as long as the groups potential is above the groups target.	2022-02-02 10:30:48 +01:00
Håkon Hægland	65c323e1a4	Replace assert with warning. ... Replace assert with warning when group rates exceeds target.	2022-01-31 01:52:36 +01:00