this basically means using Opm::EclipseState instead of the raw deck
for these keywords.
with this, property modifiers like ADD, MULT, COPY and friends are
supported for at least the PERM* keywords. If additional keywords are
required these can be added relatively easily as well.
no ctest regressions have been observed with this patch on my machine.
so far, the linker bailed out due to duplicate definitions of
variables if multiple compile units used the same type tag. This is
problematic if the sources are split into separate compile units and
that use the same type tag; in particular, this applies for
traditional libraries.
Due to various C++ peculiarities, this patch complicates the internal
implementation of the property system quite a bit, but given that the
usage of it (as well as the compile time) stay unchanged, I do not
consider this to be a big problem. Note that the introspection code is
particularly problematic because it needs static initializers that do
not cause the linker to choke in the case of multiple compile units.
Finally, to prevent future regressions, this patch adds a unit test
for the lens problem which uses multiple compile units. (This test is
called lens_immiscible_ecfv_ad_mcu and basically identical to the
existing lens_immiscible_ecfv_ad test and I thus think that it is
pretty unimaginative -- improvement proposals are welcome.)
there seems to be only a *very* limited amount of interest, the code
of the model is quite complex and there are currently no suitable
discretizations for free-flow equations in eWoms (i.e., the model
tends to be very unstable and oscillates a lot). Combined, all of this
makes maintaining this model a pain in the back, so let's remove it
some interest in these kinds of problems surfaces and until
appropriate discretizations -- like staggered grid methods -- are
available.
This works by having a "focus degree of freedom" during
linearization. When evaluating the local residual, all derivatives of
the residual/fluxes are with regard to the primary variables of that
DOF.
The two main offenders were the Forchheimer velocity model and the
model for the Stokes equations. To ensure that they continue to work,
the "powerinjection" and the "stokestest2c" problems are now both
compiled and tested with both, automatic differentiation and finite
differences, and the results of these tests is compared against the
same reference solution.
The majority of the time required to develop this patch was actually
required for testing: All tests compile and pass with debugging and
aggressive optimization flags with at least GCC 5, GCC 7 and clang
3.8, as well as Dune 2.3 and 2.4. Also, the results of flow_ebos stay
identical for Norne whilst the performance difference is below the
measurement noise on my machine. (the version with this patch applied
was actually about 1% faster.)
the groundwater problem should be symmetric because it uses an
incompressible fluid, is a single phase problem and uses the
immiscible model. (i.e., there should never be a difference between
the upstream and the downstream cells.)
the main purpose of this commit is to have a test that uses a linear
solver wrapper which was generated by the internal
EWOMS_WRAP_ISTL_SOLVER macro.
... and use the restarted GMRES solver in conjunction with a ILU-2
preconditioner for the water-air unit test.
I do not really recommend using these solvers because BiCGSTAB tends
to be 20% to 30% slower than our home-brewn implementation (this is
because the dune-istl solvers cannot use custom convergence criteria),
but dune-istl offers more choices than just BiCGStab and this
functionallity could be helpful when debugging issues related to
solving the linear systems of equations.
Note that regardless of how pedantic the interpretation of DUNE's
license is, there are no licensing issues with this code because we do
not distribute any files derived from DUNE anymore.
i.e., the solvers.hh file is removed. The main reason for this is that
it avoids having to distribute a file with a potentially incompatible
license (i.e., GPLv2 + template exception vs GPLv2+), but the
home-brewn bicgstab solver also seems to perform a tiny bit better.
i.e., using clang 3.8 to compile the test suite with the following
flags:
```
-Weverything
-Wno-documentation
-Wno-documentation-unknown-command
-Wno-c++98-compat
-Wno-c++98-compat-pedantic
-Wno-undef
-Wno-padded
-Wno-global-constructors
-Wno-exit-time-destructors
-Wno-weak-vtables
-Wno-float-equal
```
should not produce any warnings anymore. In my opinion the only flag
which would produce beneficial warnings is -Wdocumentation. This has
not been fixed in this patch because writing documentation is left for
another day (or, more likely, year).
note that this patch consists of a heavy dose of the OPM_UNUSED macro
and plenty of static_casts (to fix signedness issues). Fixing the
singedness issues were quite a nightmare and the fact that the Dune
API is quite inconsistent in that regard was not exactly helpful. :/
Finally this patch includes quite a few formatting changes (e.g., all
occurences of 'T &t' should be changed to `T& t`) and some fixes for
minor issues which I've found during the excercise.
I've made sure that all unit tests the test suite still pass
successfully and I've made sure that flow_ebos still works for Norne
and that it did not regress w.r.t. performance.
(Note that this patch does not fix compiler warnings triggered `ebos`
and `flow_ebos` but only those caused by the basic infrastructure or
the unit tests.)
v2: fix the warnings that occur if the dune-localfunctions module is
not available. thanks to [at]atgeirr for testing.
v3: fix dune 2.3 build issue
10^-4 lead to sporadic results if the final tolerance of the solution
really was 10^-4. (it currently is usually better because each time
step experiences an additional update after the Newton method deems it
to be converged.)
this problem did not work properly anyway: it oscillated like hell
(very likely to the spatial discretization used being inappropriate)
and it did not even converge if more than a single iteration was
required.
these are:
- remove the unused methods "baseEpsilon()" and "numericEpsilon()"
from FvBaseAdLocalLinearizer. (they are only meaningful in the
context of finite differences.)
- correct/update some comments
- replace most occurences of Toolbox::createConstant() with
assignments to floating point values to unclutter the code a bit.
this broke with 94006531. I actually fixed the reservoir problem
yesterday before pushing 94006531 but forgot to include the fix in my
local branch before pushing. Stupid me!
now, the dune-alugrid module is required if these tests are to be
run. (note that due to the fact that the OPM build system has not been
detecting the legacy alugrid library for a while, the practical
implications of this patch should be small to non-existant.)
this is necessary to allow non-trivial ParameterCache objects with
Local-AD evaluations. So far, the only fluid system in opm-material
which needs this is the Spe5 fluid system (which is unused by eWoms),
but sooner or later this change would have been required anyway.
Note that it is possible that this patch is errornous if Evaluation !=
Scalar for a fluid system that uses a non-trivial ParameterCache
object, but the errors should be relatively easy to fix...
i.e., the simulation for the CO2-injection problem which uses the
flash solver to handle its thermodynamics and element centered finite
volume method as the spatial discretization. The intention is to
ensure that opm-material's NcpFlash constraint solver works with
non-primitive types as Scalars. (or rather: that it will be quickly
detected if it breaks in that case.)
the in-file lists of authors has been removed in favor of a global
list of authors in the LICENSE file. this is done because (a)
maintaining a list of authors at the beginning of a file is a major
pain in the a**, (b) the list of authors was not accurate in about 85%
of all cases where more than one person was involved and (c) this list
is not legally binding in any way (the copyright is at the person who
authored a given change, if these lists had any legal relevance, one
could "aquire" the copyright of the module by forking it and removing
the lists...)
the only exception of this is the eWoms fork of dune-istl's solvers.hh
file. This is beneficial because the authors of that file do not
appear in the global list. Further, carrying the fork of that file is
required because we would like to use a reasonable convergence
criterion for the linear solver. (the solvers from dune-istl do
neither support user-defined convergence criteria not do the
developers want support for it. (my patch was rejected a few years
ago.))
the changes enable the storage cache and the intensive quantity cache
for all simulators of the lens problem and automatic differentiation
for the one which uses the ECFV discretization.
while the performance improvements are not worthwhile for the problem
in its default incarnation (using automatic diffentiation even
slightly degrades performance), it speeds up linearization by about
30% if the grid exhibits 16 times as many elements (e.g. by passing
the --grid-global-refinements=2) parameter.
at least, they compile as far as eWoms is concerned. Some external
libraries (in particular everything which uses SuperLU) still have
issues.
Also, there seem to be issues with the precision that is achievable
by the Newton method when using float.
this is because the reference solution changes for newer versions of
dune-alugrid and one of the main purposes of the lens problem is to
allow comparison with Dumux relatively easily. (Dumux usese YaspGrid
for its version of the lens problem.)
- start with an initial "do nothing" episode of 100 days to get
hydrostatic conditions.
- after that, produce oil and inject water for 900 days. (thereafter
the reservoir will be empty.)
- make the problem work with element centered FV discretizations. this
requires to make the width of the injection/production areas at
least one cell wide. This is achieved by using the new "WellWidth"
property which specifies the with of wells as a factor of the total
domain width.
- make the problem work with fully compositional models. This implied
to calculate the full composition for the fluid states which specify
the initial condition and the thermodynamic state at the wells.
- add tests and reference solutions for any combination of the {ECFV,
VCFV} discretizations and the {black-oil, NCP} models.
- the residual now does not consider constraints anymore
- instead, the central place for constraints is the linearizer:
- it gets a constraintsMap() method which is analogous to residual()
but it stores (DOF index, constraints vector) pairs because
typically only very few DOFs need to be constraint.
- the newton method consults the linearizer's constraint map to update
the error and the current iterative solution. the primary variables
for constraint degrees of freedom are now directly copied from the
'Constraints' object to correctly handle pseudo primary variables.
- the abilility to specify partial constraints is removed, i.e., it is
no longer possible to constrain some equations/primary variables of
a degree of freedom without having to specify all of them. The
reason is that is AFAICS with partial constraint DOFs it is
impossible to specify the pseudo primary variables for models which
require them (PVS, black-oil).
because of this, the reference solution for the Navier-Stokes test
is updated. the test still oscillates like hell, but fixing this
would require to implement spatial discretizations that are either
better in general (e.g., DG methods) or adapted to Navier-Stokes
problems (e.g., staggered grid FV methods). since both of these are
currently quite low on my list of priorities, let's just accept the
osscillations for now.
