Tor Harald Sandve
c45d90650e
fix checking of group target
...
- use the actual delta rate in checkOilTarget etc
- add check for total gas rate = gas rate + alq
2022-11-21 09:17:24 +01:00
Tor Harald Sandve
7d7b2803a5
renaming and adding more comments based on review
2022-11-21 08:58:49 +01:00
Tor Harald Sandve
9c8f778495
Compute the group rates that takes into account limitation on the sublevels
2022-11-21 08:58:49 +01:00
Tor Harald Sandve
1a09608263
Fix removeSurplus alq
...
Add water rate target limit
Add the gradient to the checkXXXTarget so that surplus alq is removed
until it would go below the target. I.e. the group still want to produce it target
2022-11-21 08:58:49 +01:00
Tor Harald Sandve
cd09c130b3
pass group name to getRateWithGroupLimit to avoid checking for that
2022-11-21 08:58:49 +01:00
Håkon Hægland
c313a0a4b2
Remove unused variables
2022-11-21 08:58:49 +01:00
Håkon Hægland
43244c2132
Change condition under which stage 2 is done.
...
It only makes sense to try to optimize the distribution of lift gas if
the amount of lift gas is constrained either by the maximum allowed
gaslift or total gas or the group is under individual control.
2022-11-21 08:58:49 +01:00
Håkon Hægland
686a6a969d
Calculate gradients with group limits.
...
Take into account group limits when calculating gradients for individual
wells in stage 2 of gas lift optimization.
2022-11-21 08:58:49 +01:00
Håkon Hægland
9c61262329
Changed formatting.
2022-11-21 08:58:49 +01:00
Håkon Hægland
bc566e3981
Also check LRAT group target in stage2
...
Also account for a group LRAT limit when removing surplus ALQ in gaslift
optimization stage 2.
2022-11-21 08:58:49 +01:00
Håkon Hægland
61ed803740
Do stage2 even if GLIFTOPT is not defined
2022-11-21 08:58:49 +01:00
Bård Skaflestad
4845ad0107
Merge pull request #4180 from bska/report-segment-dyn-data
...
Convey More Dynamic State Values per Segment to Output Layer
2022-11-17 12:39:29 +01:00
Bård Skaflestad
936e9e87e7
Convey More Dynamic State Values per Segment to Output Layer
...
In particular, report local condition segment flow velocities,
segment holdup fractions, and segment phase viscosities.
2022-11-17 11:49:29 +01:00
Bård Skaflestad
085ccccb1e
Capture More Dynamic State Per Segment
...
In particular, calculate segment flow velocities, segment holdup
fractions, and segment phase viscosities when updating the well
state. This is purely for reporting purposes and does not affect
the multisegmented model.
2022-11-17 11:49:29 +01:00
Bård Skaflestad
2da83fa680
Expose Internal Support for Inferring Rs/Rv From Surface Volumes
2022-11-17 11:49:29 +01:00
Bård Skaflestad
7d9beb3506
Support Using Different Types for Surface and Reservoir Rates
...
Simplifies using pointers here.
2022-11-17 11:49:29 +01:00
Arne Morten Kvarving
3c31b7bafe
Merge pull request #4271 from Tongdongq/remove_fpga
...
Remove fpgaSolver
2022-11-17 10:57:38 +01:00
Tong Dong Qiu
65128d1616
Removed unused reordering functions, file, header inclusions
2022-11-17 09:38:23 +01:00
Tong Dong Qiu
35287a61ff
Remove FPGASolver and references
2022-11-17 09:38:01 +01:00
Markus Blatt
ccdb2eda93
Merge pull request #4269 from akva2/istlsolverebos_alugrid
...
ISTLSolverEbos: instance for ALUGrid
2022-11-16 21:36:43 +01:00
Arne Morten Kvarving
d7c468575b
disable flow_alugrid in buildsystem if dune-alugrid was not found
2022-11-15 13:52:02 +01:00
Arne Morten Kvarving
d15c2607f5
fixed: eclalugridvanguard did not build in serial
...
while the comm object is implicitly castable to a mpi_comm
with mpi, it is not implicitly castable to a no_comm
without.
2022-11-15 11:25:54 +01:00
Arne Morten Kvarving
f7de591682
EclOutputBlackoilModule: explicitly cast to int to avoid narrowing warning
2022-11-14 15:40:57 +01:00
Arne Morten Kvarving
f9f6fdb3bf
BlackoilAquiferModel: only include alugrid if it is to be used
2022-11-14 15:11:12 +01:00
Arne Morten Kvarving
4bbb9656b0
EclProblem: use of alugrid is known at compile time
...
use the proper define, no need for type gymnastics
2022-11-14 15:10:59 +01:00
Arne Morten Kvarving
73b6c9fdf8
EclTransmissibility: no need to include alugrid in header
2022-11-14 15:07:34 +01:00
Arne Morten Kvarving
e50aec63d8
EclGenericWriter: no need to include alugrid in header
2022-11-14 15:06:27 +01:00
Arne Morten Kvarving
bdb2738034
ISTLSolverEbos: instance for ALUGrid
2022-11-14 14:54:11 +01:00
Atgeirr Flø Rasmussen
5107bcfada
Merge pull request #4226 from hnil/remove_assert_cprw
...
removed assert in cprw for strictly positive diagonal well coupling
2022-11-14 12:42:37 +01:00
hnil
9c76c96f21
moved debug code into #if section
2022-11-14 11:36:48 +01:00
Markus Blatt
81b296a682
Merge pull request #4182 from totto82/bc_dirichlet
...
implement dirichlet boundary conditions
2022-11-11 22:23:14 +01:00
Bård Skaflestad
622321a8e6
Merge pull request #4164 from bska/state-indep-resv-calc
...
Make Reservoir Voidage Rate Calculator Independent
2022-11-10 13:06:18 +01:00
Bård Skaflestad
d388ce40e5
Revert to Original Rs/Rv Calculation Scheme for RESV Rates
...
Keep the alternative approach in place for reference and
experimental purposes, but disabled by a macro.
2022-11-10 09:41:47 +01:00
Bård Skaflestad
f0e2a1efe0
Make Reservoir Voidage Rate Calculator Independent
...
This commit adds a new overload of the calcReservoirVoidageRates()
member function. The new overload does not depend on the user
calling defineState(), but instead takes state variables as direct
input arguments.
Reimplement the state-dependent overload in terms of the new
function. The immediate use case is calculating additional dynamic
quantities per segment in a multisegmented well model, mostly for
reporting purposes.
2022-11-09 17:08:30 +01:00
Markus Blatt
4988f98060
Merge pull request #4178 from Tongdongq/rocalution
...
Add rocalutionSolver
2022-11-09 16:44:35 +01:00
Tong Dong Qiu
b51a4a863e
Fix reduction calculation
2022-11-09 10:27:10 +01:00
Tong Dong Qiu
1dd6af15dc
Print via fmt
2022-11-08 13:05:57 +01:00
Tong Dong Qiu
d3d9743b81
Simplify parameter
2022-11-08 10:03:15 +01:00
Tong Dong Qiu
627c7d50ac
Removed outdated version checks
2022-11-08 10:03:15 +01:00
Tong Dong Qiu
8fbfd473ab
Removed unnecessary stream clear
2022-11-08 10:03:15 +01:00
Tong Dong Qiu
f91154c165
Autodetect if transposing is needed
2022-11-08 10:03:09 +01:00
Bård Skaflestad
d8c0057601
Merge pull request #4249 from bska/fix-reported-water-visc
...
Report Water Viscosity as WAT_VISC
2022-11-07 13:55:34 +01:00
Bård Skaflestad
bbb91effae
Report Water Viscosity as WAT_VISC
...
A misprint led to erroneously reporting the gas viscosity here.
Reported by: [at]EdmundStephens on GitHub.
2022-11-07 11:48:41 +01:00
Bård Skaflestad
87bf1b6020
Merge pull request #4245 from GitPaean/typo_correction
...
fixing some typos in MultisegmentWell_impl.hpp
2022-11-06 12:50:38 +01:00
Kai Bao
97b016ef44
fixing some typos in MultisegmentWell_impl.hpp
2022-11-05 22:51:59 +01:00
Bård Skaflestad
1c0f1ad4d0
Merge pull request #4243 from blattms/drop-unused-LinearSolverRequireFullSparsityPattern
...
Remove ununsed ancient LinearSolverRequireFullSparsityPattern option.
2022-11-04 21:47:27 +01:00
Bård Skaflestad
6607121bcc
Merge pull request #4239 from GitPaean/well_state_change_num_segments
...
we do not copy SegmentState if the segment number changes
2022-11-04 21:22:52 +01:00
Bård Skaflestad
d095c8c287
Merge pull request #4242 from blattms/reactivate-use-gmres-flexible-solver
...
[bugfix] recover support for selecting GMRes as solver.
2022-11-04 21:18:30 +01:00
Markus Blatt
6f5931ca1b
Remove ununsed ancient LinearSolverRequireFullSparsityPattern option.
...
It is unused since 2018 when we moved away from autodiff implementation.
2022-11-04 21:04:40 +01:00
Markus Blatt
2dc73a7c47
[bugfix] recover support for selecting GMRes as solver.
...
Previously, passing --use-gmres=true had now effect. Probably was lost
when introducing FlexibleSolver. With this change the FlexibleSolver
will now use GMRes if the option is true.
Closes #4240
2022-11-04 20:30:13 +01:00
