`iparestore --full` should check that packages for extra features such as dns and adtrust are installed in the system before restoring a backup in case the backup includes content for these features. If the packages are not installed full backup should be refused and an error message with suggestions should be showed.
If corresponding packages for these features are not installed before the backup restoring, it may cause a situation when the packages are going to be installed after the restoring. In that case configuration files restored by `ipa-restore` will be replaced by default configuration files if the files are tracked by `rpm`. E.g. if `freeipa-server-trust-ad` is not installed before `ipa-restore --full` running, when the package will be installed it also will bring `samba` package according to the dependencies. At `samba` installation step exist correct `/etc/samba/smb.conf` is going to be replaced by the default one from the `samba` package.
Fixes: https://pagure.io/freeipa/issue/7630
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The p11-kit configuration injects p11-kit-proxy into all NSS databases.
Amongst other p11-kit loads SoftHSM2 PKCS#11 provider. This interferes
with 389-DS, certmonger, Dogtag and other services. For example certmonger
tries to open OpenDNSSEC's SoftHSM2 token, although it doesn't use it at
all. It also breaks Dogtag HSM support testing with SoftHSM2.
IPA server does neither need nor use SoftHSM2 proxied by p11-kit.
Related: https://pagure.io/freeipa/issue/7810
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
For HSM support, IPA has to pass the token name for CA and subsystem
certificates to certmonger. For now, only the default 'internal' token is
supported.
Related: https://pagure.io/freeipa/issue/5608
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
See https://access.redhat.com/security/vulnerabilities/smbloris for
details.
There is no recommended value but for IPA DC we can limit with 1000
concurrent connections from unrelated clients.
Related: https://pagure.io/freeipa/issue/6951
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Implicit idmap configuration in Samba was changed in Samba 4.7 to always
require range definition. A default ('*') idmap configuration lacks any
range and thus is marked by testparm utility as invalid one.
Since we do not expect Samba allocating any IDs, idmap configuration
needs to be set in a such way that it is correct from Samba side and is
effectively disabling any allocation on those domains that we don't need
to handle.
Note that 'idmap config <domain> : range' parameter accepts range in a
special format with spaces 'begin - end', so we have to keep the
formatting of the range exact.
Related: https://pagure.io/freeipa/issue/6951
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
* override ipa_ca_key_size
* test with SHA512withRSA
Related: https://pagure.io/freeipa/issue/5608
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Mark the --request-cert option for ipa-client-install as deprecated.
Users are encouraged to request a PEM certificate with certmonger
instead. The option and /etc/ipa/nssdb will be removed in a future
version.
Related: https://pagure.io/freeipa/issue/7492
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The RedHatCAService service class contains extra logic to wait for CA
service to be up and running. Debian now correctly waits for Dogtag before
proceeding with the installation process.
Fixes: https://pagure.io/freeipa/issue/7916
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The oddjobd config files are now auto-generated with automake to have
correct path to libexec on all platforms.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The path to ipa-pki-retrieve-key was hard-coded, which broke replication
of light weight sub CA keys.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
OpenDNSSEC 1.4 and 2.x use different commands to initialize kasp.db and
manage zones. ipaplatform.tasks abstracts the commands.
Note: I added the logic to the base task instead of having different
implementations for Red Hat and Debian platforms. Eventually Fedora is
going to move to OpenDNSSEC 2.x, too. The design will make it easier to
support OpenDNSSEC 2.x on Fedora.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Co-authored-by: Timo Aaltonen <tjaalton@debian.org>
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Debian/Ubuntu use OpenDNSSEC 2.0, which has different commands to manage
zones and keys.
Co-authored-by: Timo Aaltonen <tjaalton@debian.org>
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Debian has different paths and path suffix for font-awesome. Let's have
explicit paths for all our fonts.
Co-authored-by: Timo Aaltonen <tjaalton@debian.org>
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Skip authselect configuration and migration on Debian/Ubuntu.
Co-authored-by: Timo Aaltonen <tjaalton@debian.org>
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
python3 -m lesscpy now works correctly. The make-css.sh script is
replaced with a simpler make call and ipa.css now depends on all less
files.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
man(5) default.conf says that startup_timeout has a default value of 120
seconds. Even 120 seconds are not effective unless systemd is also
reconfigured to have a larger DefaultTimeoutStartSec.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Dogtag PKI typically takes around 10 seconds to start and respond to
requests. Dogtag uses a simple systemd service, which means systemd is
unable to detect when Dogtag is ready. Commands like ``systemctl start``
and ``systemctl restart`` don't block and wait until the CA is up. There
have been various workarounds in Dogtag and IPA.
Systemd has an ExecStartPost hook to run programs after the main service
is started. The post hook blocks systemctl start and restart until all
post hooks report ready, too. The new ipa-pki-wait-running script polls
on port 8080 and waits until the CA subsystem returns ``running``.
Related: https://pagure.io/freeipa/issue/7916
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
This problem was discovered by pylint.
Fixes: https://pagure.io/freeipa/issue/7921
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The make target `pylint` hasn't a full list of its dependencies.
This leads to problems like:
- different build results
- PR tests just do not run pylint over some Python scripts.
The new build target (`python_scripts`) was implemented.
It's intended for building all Python scripts (files, containing
@PYTHONSHEBANG@ as a shebang placeholder).
The make `pylint` should require it.
Fixes: https://pagure.io/freeipa/issue/7921
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The object logger methods been deprecated for about two years since release
4.6.0. The log manager used to moneky-patch additional log methods like
info(), warning(), and error() into API plugin objects. The methods have
been replaced by calls to module logger objects in 4.6.0.
Remove monkey-patch logger methods, log manager, and its root logger from
ipapython.ipa_log_manager.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
On non-usrmerge systems (e.g., Debian), bash, mv, cp, cat, tail,
keyctl, and gzip live in /bin, not /usr/bin.
On usrmerge systems, /bin is a symlink to /usr/bin (or vice versa), so
this has no effect.
Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
With the latest NFS changes:
* systemd NFS-related unit files
* configuration from /etc/sysconfig/nfs to /etc/nfs.conf
testing NFS client {manual, ipa-client-automount} configuration
has become paramount.
This extends the existing automount location test and must be
run nightly.
Fixes: https://pagure.io/freeipa/issue/7805
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Peter Cech <pcech@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The test case verifies that IPA supports external CAs with weaker keys.
Related: Related: https://pagure.io/freeipa/issue/6790
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Certmonger has hard-coded defaults for key size and key type. In case a
request does not contain these values, certmonger uses 2048 RSA keys.
Since the CA now has 3072, it will also rekey the CA to 2048 instead of
resubmitting with the existing 2048 bit key.
Use key-size and key-type from the existing request when resubmitting.
Related: https://pagure.io/freeipa/issue/6790
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The signing key for IPA's CA certificate now uses a 3072 bit RSA key by
default.
According to https://www.keylength.com/, NIST 800-57 Part 1 Rev. 4
recommends 3072 bit RSA keys for keys that are used beyond 2030 for 128 bit
strength.
Fixes: https://pagure.io/freeipa/issue/6790
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
IPA used to write a custom /etc/resolv.conf. On Fedora and RHEL,
NetworkManager is typically maintaining resolv.conf. On reboot or
restart of the service, NM overwrites the custom settings.
On systems with NM enabled, the DNS server installer now drops a config
file into NM's global config directory and delegates resolv.conf to NM.
On systems without NM, fall back to create /etc/resolv.conf directly.
Fixes: https://pagure.io/freeipa/issue/7900
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
The method check_repl_update in ipaserver/install/replication.py badly
handles the attributes nsds5ReplicaLastUpdateStart and
nsds5ReplicaLastUpdateEnd as it expects them to contain an int.
These attributes are defined as GeneralizedTime
(OID 1.3.6.1.4.1.1466.115.121.1.24, for instance
nsds5ReplicaLastUpdateEnd='20190412122523Z') but older versions of 389-ds can
also return the value 0 for uninitialized values (see 389-ds ticket 47836).
The code must be able to handle the generalized time format or the 0 value.
The fix removes the 'Z' from the GeneralizedTime and converts to an int,
or assigns 0.
Fixes: https://pagure.io/freeipa/issue/7909
Reviewed-By: François Cami <fcami@redhat.com>
When fs.protected_regular=1 root cannot open temp files that
are owned by other users read-write.
So unlink temporary file before shutil.copy to it.
Fixes: https://pagure.io/freeipa/issue/7907
Signed-off-by: François Cami fcami@redhat.com
Reviewed-By: Christian Heimes <cheimes@redhat.com>
As the FreeIPA server is no longer a NTP service
providing instance its clients and replicas
configuration of time service can not be handled
as it was before change to chrony. Configuration
using master FQDN or autodiscovery for DNS record
would make no difference because every FreeIPA
instance is only chrony client now and does not
update DNS _ntp._udp record.
FreeIPA now asks user for NTP source server
or pool address in interactive mode if there is
no server nor pool specified and autodiscovery
has not found any NTP source in DNS records.
Resolves: https://pagure.io/freeipa/issue/7747
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
When fs.protected_regular=1 root cannot open temp files that
are owned by other users read-write.
So move os.chown after write.
Refactoring suggested by Christian Heimes.
Fixes: https://pagure.io/freeipa/issue/7906
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Since commit 905ab93, ipa-server-install refuses single-label domains,
but older IPA server versions could be installed with a single-label
domain/realm.
ipa-client-install is already refusing single-label domain/realm when
provided to the CLI with --domain / --realm but does not perform the same
check when the domain is discovered.
This commit adds a check to domain names automatically discovered and skips
single-label domains. Same check for realm names.
Fixes: https://pagure.io/freeipa/issue/7598
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Mention the new option in the man pages for CA, KRA, replica, and server
installation. The documentation must be improved once we have figured
out which options are going to be supported.
Fixes: pagure.io/freeipa/issue/5608
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Install CA with 4096bit RSA key and SHA-384 signature.
Fixes: https://pagure.io/freeipa/issue/5608
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
ipa-server-install now verifies the pki ini override file earlier
Fixes: https://pagure.io/freeipa/issue/5608
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Allow to specify a pki.ini overlay file on the command line. The override
file can be used to override pkispawn settings.
Fixes: https://pagure.io/freeipa/issue/5608
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Note: Some configuration stanzas are deprecated and have been replaced
with new stanzas, e.g. pki_cert_chain_path instead of
pki_external_ca_cert_chain_path.
Fixes: https://pagure.io/freeipa/issue/5608
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Common settings like "pki_*_signing_key_algorithm" now use an IPA
specific template variable. The approach makes it easier to change all
signing parameters to use a different algorithm.
Fixes: https://pagure.io/freeipa/issue/5608
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
* ipa-dnskeysyncd now handles CONNECT_ERROR during bind
* ipa-dnskeysyncd no longer logs full traceback on connection error.
* ipa-dnskeysync-replica now handles SERVER_DOWN/CONNECT_ERROR
exceptions and turns them into pretty error messages.
Fixes: https://pagure.io/freeipa/issue/7905
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Oleg Kozlov <okozlov@redhat.com>
Vault and KDC proxy are neither critical subsystems nor are they likely to
fail. They have been pretty stable and don't see any major development.
It's sufficient to run them in nightly tests only.
The removal speed up gating a bit. Especially vault tests are slow and
usually take more than 30 minutes to complete
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
ipa-client-automount uses the host keytab to acquire a TGT. The script
sets up a temporary directory for its ccache. At the end of the script
it removes the ccache and temp directory again.
In case of a failed kinit, the ccache is not created and the removal of
the ccache causes an exception. The automount installer now uses
shutil.rmtree() to remove the temporary directory and all its content.
Fixes: https://pagure.io/freeipa/issue/7862
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: François Cami <fcami@redhat.com>
netifaces is a binary Python extension. Outside of the installer, it's
only used by CheckedIPAddress.get_matching_interface, which is only
called from installer code.
Make the import of netifaces optional to reduce the amount of
dependencies for PyPI package use case. Binary extensions are especially
annoying, because they depend on shared libraries, compiler, and header
files to be present.
Related: https://pagure.io/freeipa/issue/6468
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Oleg Kozlov <okozlov@redhat.com>
ipa cert-find --users=NAME was slow on system with lots of certificates.
User certificates have CN=$username, therefore the performance tweak
from ticket 7835 also works for user certificates.
Related: https://pagure.io/freeipa/issue/7835
Fixes: https://pagure.io/freeipa/issue/7901
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
