Adding explicit input specification of water-gas ratio (RVW) and RVW output plus simulator gas-water system with salt precipitation and water evaporation for
Sometimes the potentials are inaccurate as a safty measure we
also check that the rates are violated.
The rates are supposed to be less or equal to the potentials.
If no cell has a valid corner-point geometry, typically caused by
using GDFILE to read non-finite data such as all ZCORN = -1.0E+20,
then we must not attempt to generate a grid structure. If we do, we
will typically just fail somewhere deep down in the corner-point
processing code and generate a diagnostic message that's hard to
decipher.
With this commit we instead output a diagnostic message of the form
Failed to create valid EclipseState object.
Exception caught: No active cell in input grid has valid/finite cell geometry
Please check geometry keywords, especially if grid is imported through GDFILE
This may not be a lot better than the original diagnostic
Processing grid
flow: ${ROOT}/opm-grid/opm/grid/cpgpreprocess/preprocess.c:768: is_lefthanded: Assertion `! searching' failed.
Aborted (core dumped)
but does at least suggest that the grid data may be faulty.
In combination with the relevant changes in opm-common this
prevent flow in binary Linux packages from having a timestamp in the
executable that changes with every rebuild.
With the changes in opm-common one can now set the variable
OPM_BINARY_PACKAGE_VERSION to a meaningful version string (Debian
11.2: 2021.10-4). If that is done and flow is built from tarballs it
will now not have a time stamp and print the package version to the
PRT file. E.g.
Flow Version = 2021.10 (Debian 11.2: 2021.10-1)
If guiderate is violated change to group controll.
Note that a factor 1.01 is added to minimize oscilations.
Fix missing multiplication with group efficiency when accumulating guiderates
Renames some methods and variables to reflect that the well is no
longer necessarily a StandardWell. It can be either a MultisegmentWell
or a StandardWell. This should avoid confusion about the nature of
the variable.
If a well is under a group that is limited by a target, it should use as little gaslift as possible.
The reduction algorithm will reduce the gaslift of the well as long as the groups potential is above the groups target.
Introduces two new data types BasicRates and LimitedRates to capture
oil, gas, and water rates, and whether they have been limited by well
or group targets. This reduces the number of variables that are passed
to and returned from various methods and thus makes the code easier to
read.
There was a fallout when skipping concating these files to the
default ones (PR #1708). We should also have deactivated creating
these files at all. As a result these files appeared in all parallel
runs that were aborted.
This change now prevents creating and logging to these files in
parallel in a default
run (--enable-parallel-logging-fallout-warning=false).
Developers can still activate logging and concating to see whether
everything is only logged on the io process by passing
--enable-parallel-logging-fallout-warning=true.
Closes 3725
Introduces a gaslift debugging variable in ALQState in WellState. This
variable will persist between timesteps in contrast to when debugging
variables are defined in GasLiftSingleWell, GasLiftGroupState, or GasLiftStage2.
Currently only an integer variable debug_counter is added to ALQState,
which can be used as follows: First debugging is switched on globally
for BlackOilWellModel, GasLiftSingleWell, GasLiftGroupState, and
GasLiftStage2 by setting glift_debug to a true value in BlackOilWellModelGeneric.
Then, the following debugging code can be added to e.g. one of
GasLiftSingleWell, GasLiftGroupState, or GasLiftStage2 :
auto count = debugUpdateGlobalCounter_();
if (count == some_integer) {
displayDebugMessage_("stop here");
}
Here, the integer "some_integer" is determined typically by looking at
the debugging output of a previous run. This can be done since the
call to debugUpdateGlobalCounter_() will print out the current value
of the counter and then increment the counter by one. And it will be
easy to recognize these values in the debug ouput. If you find a place
in the output that looks suspect, just take a note of the counter
value in the output around that point and insert the value for
"some_integer", then after recompiling the code with the desired value
for "some_integer", it is now easy to set a breakpoint in GDB at the
line
displayDebugMessage_("stop here").
shown in the above snippet. This should improve the ability to quickly
to set a breakpoint in GDB around at a given time and point in the simulation.
This is needed to get consistent estimates for the summary vectors
* {F,G,W}OP{R,T}{F,S} -- Free/Vaporized Oil Production
* {F,G,W}GP{R,T}{F,S} -- Free/Dissolved Gas Production
in the case of distributed wells.
Thanks to [at]blattms for the suggested fix.
Kernel files are located in opm/simulators/linalg/bda/opencl/kernels.
CMake will combine them for usage in
${PROJECT_BINARY_DIR}/clSources.cpp that becomes part of the library.
Refactors getOilRateWithLimit_(), getGasRateWithLimit_(), and
getWaterRateWithLimit_() in GasLiftSingleWellGeneric.cpp. The
common part of the methods is split out into a new method called
getRateWithLimit_(). The purpose of the refactorization is to reduce
reptetive code and make the code easier to maintain.
This is in agreement with C++ Core Guidelines. A member function should
be marked const unless it changes the object’s observable state. This
gives a more precise statement of design intent, better readability, more
errors caught by the compiler, and sometimes more optimization opportunities.
Refactor getOilRateWithGroupLimit_(), getGasRateWithGroupLimit_(),
getWaterRateWithGroupLimit_(), and getLiquidRateWithGroupLimit_() into
a single generic method called getRateWithGroupLimit_().
Consider all groups when reducing oil rate to group limits.
The current code just checks the first group limit in the set.
But there might be groups later in the set with more restrictive
limits, causing the oil rate to be reduced more than the first
limit.
This allows for testing the simulator with the artifically split communicator,
in order to verify that there is no inappropriate usage of the world communicator.
As discussed in PR #3728, it is better to move the two methods
reduceALQtoGroupTarget() and checkGroupTargetsViolated() from
OptimizeState to the parent class, then we do not have to abuse
OptimizeState in maybeAdjustALQbeforeOptimizeLoop_() just to call
reduceALQtoGroupTarget().
Also fixes a typo (as discussed in PR #3729) in reduceALQtoGrouptTarget()
where the water rate is updated with the gas flow rate instead of the
water flow rate. Should be like this:
water_rate = -potentials[this->parent.water_pos_];
instead of
water_rate = -potentials[this->parent.gas_pos_];
The cell pressure is independent of well model and belongs to the interface
This should move the MSW model one step closer to supporting GasWater cases
If a well is shut due to physical or economical reason the wellstate status is shut
so we can not check the wellstate we instead check the well from the schedule to
make sure we don't test wells that are shut by the user.
Fixes
```
In file included from opm-simulators/opm/simulators/flow/BlackoilModelEbos.hpp:53,
from opm-simulators/opm/simulators/flow/SimulatorFullyImplicitBlackoilEbos.hpp:26,
from opm-simulators/flow/flow_ebos_gaswater.cpp:28:
opm-simulators/opm/simulators/linalg/ISTLSolverEbos.hpp: In member function ‘bool Opm::ISTLSolverEbos<TypeTag>::solve(Opm::ISTLSolverEbos<TypeTag>::Vector&)’:
opm-simulators/opm/simulators/linalg/ISTLSolverEbos.hpp:265:56: error: incomplete type ‘Opm::WellContributions’ used in nested name specifier
auto wellContribs = WellContributions::create(accelerator_mode, useWellConn_);
^~~~~~
```
split in API specific classes for Cuda/OpenCL
this to
1) it's cleaner
2) it avoids pulling in openCL code in cuda classes which leads
to clashes between nvidia headers and opencl.hpp
there is still too much API specific things in interface between the
bda components to work through a virtual interface so we still have to cast
to the relevant implementation in various places.
OpenCL header was included and OpenclKernels used unconditionally
in WellContributions.cpp. As this file is compiled if CUDA is found,
too it lead to undefined references for e.g. cl::CommandQueue if
opencl headers were there and compile error if not.
annoyingly, dune has a casting operator for mpicollectivecommunication
-> MPIComm but for some reason does not have a casting operator for
the dummy collectivecommunication -> No_Comm
