OilfieldToolsNet/opm-simulators
4
0
Fork 0
mirror of https://github.com/OPM/opm-simulators.git synced 2025-02-25 18:55:30 -06:00
Code Issues Packages Projects Releases Wiki Activity
17,510 Commits 24 Branches 102 Tags 90 MiB
e46e52f3dc
Commit Graph

281 Commits

Author SHA1 Message Date
Arne Morten Kvarving
7b33cc6d62 move computeConnLevel(Inj|Prod)Ind to WellInterface 
now code is shared between STW and MSW
 2023-06-22 09:58:58 +02:00
Arne Morten Kvarving
01c4aa1927 move updateWellStateWithTHPTargetProd to WellInterface 
to share implementation between STW and MSW
 2023-06-22 09:10:38 +02:00
Kai Bao
5f344eef26 avoid dividing by zero in updateWellStateRates() 2023-06-20 23:14:50 +02:00
Arne Morten Kvarving
2630522d7f avoid unused variable warning with NDEBUG 2023-05-24 12:39:24 +02:00
Arne Morten Kvarving
0406a033a2 introduce getMobility in WellInterface 
we now share implementation between StandardWell and MultisegmentWell
 2023-05-15 21:39:59 +02:00
Kai Bao
1542f2c087 refactor the network update 
moving the well controls and network update out of assembleImpl to avoid
call assmebleImpl in a recursive manner
 2023-04-20 14:59:50 +02:00
Håkon Hægland
e241fccbca Only iterate wells activated for gaslift 2023-04-13 11:08:30 +02:00
Håkon Hægland
4ba5e3efad Iterate ALQ when testing gaslift well 
When testing a gaslift well under THP control, if the
well does not converge with maximum alq, try to reduce alq
in increments until well equations converge.
 2023-04-13 10:40:29 +02:00
Kai Bao
9304542dbe combining wellIsStopped and wellUnderZeroRateTaget 
for better readability.
 2023-03-29 14:40:50 +02:00
Kai Bao
b6eecf5c55 not updating the THP for zero rate controlled wells 2023-03-29 13:48:34 +02:00
Kai Bao
f4e0a996b9 wells under zero injection target are also treated as stopped well 
when formulating the well control equations
 2023-03-29 13:48:34 +02:00
Bård Skaflestad
9524348401
Merge pull request #4549 from totto82/resv_undersat 
fix RESV for undersaturated wells
 2023-03-29 10:35:33 +02:00
Tor Harald Sandve
42527ac829 fix RESV for undersaturated wells 2023-03-27 16:03:40 +02:00
Kai Bao
2c5a4398c9 make sure zero production rates are obtained for the following wells 
1. stopped production wells
2. production wells under zero rate control

We guarantee the objective through enforce zero values for the WQTotal
primary variable during the initialization and update process during the
Newton solution.
 2023-03-27 13:24:08 +02:00
hnil
aa40d2f0f3 -- prepared for possibliy of not using cached intentensive quantities 2023-03-24 19:57:31 +01:00
Kai Bao
57bf959efd update well state when switching to THP control for producers 
hopefully, it begins at a reasonably good initial point. When the Newton
iteration begins with certian solution region, the nonlinear solution
might fail.
 2023-02-07 14:50:07 +01:00
Markus Blatt
d2f55c59fc
Merge pull request #4359 from totto82/fixGPMAINT2 
Fix GPMAINT for groups without control
 2023-01-23 14:12:00 +01:00
Arne Morten Kvarving
7b2b18045e adjust to upstream enum changes 2023-01-18 11:24:25 +01:00
Arne Morten Kvarving
c0e9193e50 WellInterface: move code using WellMICPProperties to compile unit 2023-01-13 14:11:46 +01:00
Arne Morten Kvarving
f74f2ded8e add missing WellMICPProperties.hpp includes 2023-01-13 14:01:56 +01:00
Arne Morten Kvarving
d011bb29ae StandardWell: move code using WellPolymerProperties to compile unit 2023-01-13 13:02:37 +01:00
Arne Morten Kvarving
f860490c9f WellInterface: move code using WellPolymerProperties to compile unit 2023-01-13 13:02:37 +01:00
Arne Morten Kvarving
97f76412ae add missing WellPolymerProperties.hpp includes 2023-01-13 13:02:37 +01:00
Arne Morten Kvarving
71bf868ddb WellInterface: move code using WellBrineProperties to compile unit 2023-01-13 11:14:18 +01:00
Arne Morten Kvarving
131f52773f add missing WellBrineProperties.hpp includes 2023-01-13 11:14:18 +01:00
Arne Morten Kvarving
a29d5f81b6 WellInterface: move code using WellFoamProperties to compile unit 2023-01-13 10:18:26 +01:00
Arne Morten Kvarving
a0f85c8a93 add missing WellFoamProperties.hpp includes 2023-01-13 10:18:26 +01:00
Tor Harald Sandve
ceb8d996aa Fix GPMAINT for groups without control 
If GPMAINT is used the group does not need a valid control object
 2023-01-10 15:59:21 +01:00
Arne Morten Kvarving
a020a993b5 WellInterface: use {fmt} to format error messages 2022-12-23 09:39:29 +01:00
Arne Morten Kvarving
f17a90170d use exception classes from opm-common 2022-12-13 12:56:13 +01:00
Håkon Hægland
bc566e3981 Also check LRAT group target in stage2 
Also account for a group LRAT limit when removing surplus ALQ in gaslift
optimization stage 2.
 2022-11-21 08:58:49 +01:00
Arne Morten Kvarving
26d9f18687 changed: move isPressureControlled to WellInterfaceGeneric 
no typetag dependence. also no need for this to be virtual
 2022-11-04 14:24:19 +01:00
Arne Morten Kvarving
796aa51e79 changed: move calculateBhpFromThp to WellBhpThpCalculator 2022-10-31 13:16:51 +01:00
Arne Morten Kvarving
b9ee7eae6f use if constexpr 2022-10-26 11:23:55 +02:00
Tor Harald Sandve
7b90d35f21 fixup from PR comments 2022-10-18 12:58:07 +02:00
Tor Harald Sandve
e1d36f32b8 add missing wellGroupTargetsViolated in ++ operator 2022-10-18 10:55:17 +02:00
Tor Harald Sandve
756c9bad21 set ws.thp = thp_limit for wells under THP control 2022-10-18 10:55:17 +02:00
Tor Harald Sandve
d25dc4e795 check controls in getWellConvergence 2022-10-18 10:55:17 +02:00
Bård Skaflestad
36ca7d11e9
Merge pull request #4149 from totto82/improve_conv_thp 
Improve convergence for newly opened wells with thp control
 2022-10-18 10:26:55 +02:00
Tor Harald Sandve
74eb0d048f Improve convergence for newly opened wells with thp control 2022-10-17 15:32:27 +02:00
Tor Harald Sandve
2ca3c25f4f set alq before trying to solve the equation during well testing 2022-10-10 08:14:42 +02:00
Kai Bao
d3d8e11e00 limiting the smallest injection rate to 1.e-7 
for the injection phase.
 2022-09-20 11:40:34 +02:00
Tor Harald Sandve
0f969dd7a5 check ipr for wells prevented to change to thp 2022-08-19 10:48:56 +02:00
Tor Harald Sandve
96222f8afb dont use explicit vfp lookup for newly opened wells 2022-08-19 10:33:19 +02:00
Tor Harald Sandve
9364d4c54b Add option for wvfpexp item 2 plus minor fixes 2022-08-19 10:33:19 +02:00
Tor Harald Sandve
b1b23a57de Add option for explicit vfp lookup for problmatic wells 2022-08-19 10:33:19 +02:00
Atgeirr Flø Rasmussen
ffb09ee53e
Merge pull request #3937 from atgeirr/pressure-bhp-cpr 
Pressure bhp cpr
 2022-06-16 17:15:49 +02:00
hnil
541edeaf67 - add default for CPRW 
- cleanded code
 2022-06-08 17:03:27 +02:00
hnil
6c407506a9 cleaning code 2022-06-08 17:03:27 +02:00
Tor Harald Sandve
1f876d1800 implement rsrv item 10 WCONINJE 
MSW not supported yet
 2022-06-08 13:55:29 +02:00
Tor Harald Sandve
4b5a53eaeb
Merge pull request #3887 from totto82/init_alt_eps 
use alternative init for wells with all rates less than eps
 2022-04-26 10:46:19 +02:00
Tor Harald Sandve
bd145913e8 use alternative init for wells with all rates less than eps 2022-04-26 09:32:18 +02:00
Atgeirr Flø Rasmussen
75ccd88f4f
Merge pull request #3888 from totto82/stop_tgr2 
fix trivial group target
 2022-04-26 08:34:06 +02:00
Tor Harald Sandve
d00a2e2341 fix trivial group target 2022-04-25 08:10:19 +02:00
Tor Harald Sandve
92175cf094 Fix STOP in combination with inoperable/unsolvable 2022-04-22 09:15:09 +02:00
Håkon Hægland
11907495c1 Well testing of gas lift wells 
Assign a maximum ALQ value to each GLIFT producer when doing well testing
in beginTimeStep(). This allows the well to be considered open. Then,
later in the timestep, when assemble() is called, the full gas lift
optimization procedure can adjust the ALQ to its correct value.

It is also observed that in some cases when gas lift is switched off by
setting ALQ to zero, and later in the schedule is switched back on again,
it might not be possible to determine bhp from thp for low small ALQ values.
Instead of aborting the gas lift optimization, we should try increasing
ALQ until we get convergence or until the maximum ALQ for the well is
reached.
 2022-04-20 10:51:34 +02:00
Markus Blatt
ff410d268a
Merge pull request #3863 from totto82/unsolvable_fix 
fix to --shut-unsolvable-wells=true option
 2022-04-11 07:33:46 +02:00
Tor Harald Sandve
6f29bf715c
Merge pull request #3778 from GitPaean/always_inner 
[testing] always using inner iterations for testing purpose.
 2022-04-08 15:44:33 +02:00
Tor Harald Sandve
e2e0ec9dd9 fix to --shut-unsolvable-wells=true option 2022-04-05 14:42:27 +02:00
Bård Skaflestad
0cd2ce6589
Merge pull request #3824 from totto82/notswitchthp 
Avoid switching to thp control if production is decreasing or injection is increasing
 2022-03-25 14:34:30 +01:00
Tor Harald Sandve
f4d81e33f1 Avoid switching to thp control if it results in higher rates 2022-03-25 09:12:15 +01:00
Tor Harald Sandve
32dfdc6198 improve initialization msw new wells 2022-03-24 09:53:46 +01:00
Håkon Hægland
438a712e54 Gas lift optimization for two-phase oil-water. 
Add gas lift optimization support for two-phase oil-water flow.
 2022-03-07 15:19:43 +01:00
Tor Harald Sandve
d8934ea7a9 Set well control to thp or bhp in well testing 2022-02-17 09:01:32 +01:00
Kai Bao
086b8aab7d only multisegment wells will alway inner iteration 2022-01-21 10:43:36 +01:00
Kai Bao
0000df18a4 always using inner iterations for testing purpose. 2022-01-21 10:43:36 +01:00
Joakim Hove
6b92443cb4 Downstream filesystem reorganisation in opm-common 2022-01-02 14:33:34 +01:00
Tor Harald Sandve
2c17b1942c Move getPerfCellPressure to wellInterface 
The cell pressure is independent of well model and belongs to the interface
This should move the MSW model one step closer to supporting GasWater cases
 2021-11-30 10:48:02 +00:00
Tor Harald Sandve
50ab26c330 cleanup 2021-11-23 14:01:07 +00:00
Tor Harald Sandve
43fd50e355 only mark negative potentials as not operable 2021-11-22 11:27:45 +00:00
Tor Harald Sandve
b5cdb1048a Mark wells with negative and trivial potentials as not operable 
The simulator will try to compute potentials at every iterations to
try to reopen the well.
 2021-11-22 08:44:17 +00:00
Tor Harald Sandve
160c80b574 check operability history wells 2021-10-18 09:21:04 +02:00
Tor Harald Sandve
1c9c5c484b check operability injectors 2021-10-15 12:32:02 +02:00
Tor Harald Sandve
70c9d2e237
Merge pull request #3590 from daavid00/micp-2021-10 
micp
 2021-10-14 22:28:28 +02:00
daavid00
48b175904a first version of micp implementation in flow 2021-10-14 17:44:57 +02:00
Atgeirr Flø Rasmussen
5e1853b8e4
Merge pull request #3588 from totto82/improve_switch_output 
make multiple well control switching output more readable
 2021-10-14 10:56:53 +02:00
Tor Harald Sandve
83ef3730b2 make multiple well control switching output more readable 2021-10-14 09:40:34 +02:00
Tor Harald Sandve
d07aed204f Catch numerial issues due to problems with inner iterations wells 2021-10-08 15:26:53 +02:00
Joakim Hove
0e365abe36 WellTestState::dropCompletion -> WellTestState::open_completion 2021-10-08 10:40:38 +02:00
Joakim Hove
0648d6bf5d WellTestState::openWell -> WellTestState::open_well 2021-10-08 10:17:14 +02:00
Joakim Hove
d806762f7a WellTestState::hasWellClosed -> WellTestState::well_is_closed 2021-10-08 10:17:14 +02:00
Joakim Hove
feaaebf3fc WellTestState::hasCompletion -> WellTestState::completion_is_closed 2021-10-08 09:06:21 +02:00
Joakim Hove
0c40771c7a
Merge pull request #3579 from joakim-hove/template-on-content-type 
WTEST: only count actually closed wells.
 2021-10-07 09:27:41 +02:00
Joakim Hove
4816762b66 Well testing: only count actually closed wells. Change in opm-common 2021-10-06 15:32:17 +02:00
Elyes Ahmed
f53c597f90 Replacing use of MPI_COMM_WORLD with a variable communicator. 2021-10-05 13:07:52 +02:00
Tor Harald Sandve
afdfe55bbc restrict maximum number of times a well can switch to the same control 2021-10-04 10:12:39 +02:00
Tor Harald Sandve
cb9254636b rename and cleanup 2021-09-30 09:01:07 +02:00
Tor Harald Sandve
bc8da79779 stop checking operability in the beginning of an timestep 2021-09-30 08:47:47 +02:00
Tor Harald Sandve
c9e93e6155 stop updating operability during iterations 2021-09-30 08:47:47 +02:00
Tor Harald Sandve
c790b14753 Make WTEST more robust 
Only open wells that are solvable, operable and economical
 2021-09-28 10:07:12 +02:00
Joakim Hove
a11e3222bd
Merge pull request #3534 from joakim-hove/use-single-well-state 
Use single well state
 2021-09-22 12:35:15 +02:00
Tor Harald Sandve
30592c7593 update status after WTEST 2021-09-21 10:32:56 +02:00
Joakim Hove
5531120411 Use SingleWellState argument instead of full WellState 2021-09-20 11:45:24 +02:00
Joakim Hove
755de65eb4 Use SingleWellState to manage well surface rates 2021-08-24 12:46:24 +02:00
Joakim Hove
2f504536f4 Add well potentials to SingleWellState 2021-08-23 12:05:26 +02:00
Joakim Hove
581f571c9d Use SingleWellState for production and injection control 2021-08-15 09:07:39 +02:00
Joakim Hove
a54daf75e8 Add trivial class SingleWellState with bhp and thp 2021-08-15 09:01:21 +02:00
Tor Harald Sandve
a00c42c673 compute potentials for newly opened wells due to testing 2021-06-30 13:13:56 +02:00
Tor Harald Sandve
5368343512 handle GRUP in wellState from target 2021-06-23 14:46:35 +02:00
Tor Harald Sandve
b5e29684f2 shut/stop unsolvable wells 2021-06-17 11:50:31 +02:00