Sam Demeulemeester
2a7631daab
Enumerate all XMP 3.0 profiles on DDR5 to find the fastest. Solve a rounding issue with DDR5 timings
2022-04-22 00:49:54 +02:00
Martin Whitaker
66c6dfa357
Reduce pause at start delay to 3 seconds.
2022-04-17 22:53:39 +01:00
Martin Whitaker
644a13c730
Add usbdebug command line option and conditionally pause at end of USB scan.
...
If the usbdebug option is present, pause at the end of the USB scan until
a key is pressed. Otherwise, if the keyboard=usb option is present and no
USB keyboards were discovered, pause for 10 seconds. Otherwise don't pause.
2022-04-17 22:46:17 +01:00
Martin Whitaker
d1cafa9f64
Fix grub-iso build on systems with grub2-mkimage.
2022-04-17 22:42:56 +01:00
Sam Demeulemeester
a95afe88db
Make ISO volume name ISO9660 compliant and allow alternative name for grub2-mkimage (ie: Debian package use grub-mkimage instead of grub2-mkimage)
2022-04-17 16:59:57 +02:00
Sam Demeulemeester
3ac3aa995e
Add detection for some manufacturers related to RDRAM
2022-04-16 18:38:32 +02:00
Sam Demeulemeester
be9502ac01
Add detection for Rambus RDRAM modules & support for ICH1/2/3
2022-04-16 18:36:58 +02:00
Sam Demeulemeester
fec8bc258b
Correct SMT/HTT flag according to AP-485
2022-04-16 18:34:49 +02:00
Lionel Debroux
ea6e32cb48
Add support for parsing DMI struct type 1 (System Information), whose presence is mandatory, and use it as fallback for DMI struct type 2 (Baseboard Information), which often gives more useful data, but is optional. Fixes part of issue #36 . ( #39 )
2022-04-16 13:40:50 +02:00
Sam Demeulemeester
7b2964dd21
Fix display of Paging Mode (PAE/LM/*NONE*) on 32bit binary
2022-04-16 13:31:28 +02:00
Sam Demeulemeester
2a994e7ff5
Various code cleanup following PR review
2022-04-16 13:31:28 +02:00
Sam Demeulemeester
eae5dd2796
Correct TTY to match the new temperature location on display
2022-04-16 13:31:28 +02:00
Sam Demeulemeester
bd5d3e865f
Move various function in display.h. Finalize wording on CPU Topology
2022-04-16 13:31:28 +02:00
Sam Demeulemeester
96a9021c93
Increase right block on line 7/8 by 1 char.
2022-04-16 13:31:28 +02:00
Sam Demeulemeester
6fca9bedc9
Rework Line 9. Add DDR1->DDR5 Timing Detection to display on this line
2022-04-16 13:31:28 +02:00
Sam Demeulemeester
979b85548d
Rework Line #7 left block. Add preliminary CPUID function to detect CPU Topology
2022-04-16 13:31:28 +02:00
Sam Demeulemeester
fac6e2a973
Rework the right block of lines 8/9
2022-04-16 13:31:28 +02:00
Sam Demeulemeester
8f0437c579
Better githash.h generation on Makefile from @martinwhitaker
2022-04-16 13:31:28 +02:00
Sam Demeulemeester
1afcd08951
Realign cache/memory size & bandwidth on line 3-6 for better readability. Add a new flag in printf to add a space between number in unit in %k mode
2022-04-16 13:31:28 +02:00
Sam Demeulemeester
5580f7562d
Add tracking & display for maximum CPU Temperature. Make the enable_temperature flag working as expected
2022-04-16 13:31:28 +02:00
Sam Demeulemeester
272f1ce4f6
Rework line 2. Add placeholder for a dual temperature display (Actual/Max). Paging mode will move to line 7
2022-04-16 13:31:28 +02:00
Sam Demeulemeester
5f92ff1a64
Rework first line, add build number based on git hash, move 32/64b info to build number, add githash.h to git ignore. A better implementation of Makefile is needed (check if git is present and avoid rebuild (APP)*.c if hash is the same
2022-04-16 13:31:28 +02:00
Sam Demeulemeester
faa0252e9c
Final title color for maximum readability and to avoid confusion with the commercial Memtest86
2022-04-16 13:31:28 +02:00
Martin Whitaker
32b9ce38e7
Fix early reboot on 32-bit CPUs that don't support long mode (issue #38 )
2022-04-13 20:37:47 +01:00
Martin Whitaker
31f06ea7c8
Add a framebuffer test when EFI debug is enabled.
2022-04-13 14:30:52 +01:00
Martin Whitaker
6e9bdce92d
Select the best mode for the EFI framebuffer.
...
This chooses the lowest resolution that supports our main display.
2022-04-13 14:30:23 +01:00
Martin Whitaker
2cd060b22c
Fix warning about mismatched comparison operands in 32-bit build.
2022-04-13 14:20:46 +01:00
Martin Whitaker
06c2769abe
Tabulation and white space fixes.
2022-04-13 12:13:13 +01:00
Martin Whitaker
9f92ecf761
Fix the remapping of the screen frame buffer.
...
The size of the region to be mapped is determined by the buffer stride,
not the pixel width.
2022-04-11 21:46:49 +01:00
Martin Whitaker
84a54ca083
uhci: use multiple TDs for data transfers larger than the max packet size.
...
Unlike the other USB controllers, a UHCI transfer descriptor can only
request a single packet.
2022-04-11 21:17:09 +01:00
Martin Whitaker
1998ce16d1
Handle 64-bit frame buffer addresses when printing EFI debug info.
2022-04-11 20:00:59 +01:00
Martin Whitaker
ae2c010610
uhci: fix device speed setting when constructing a transfer descriptor.
2022-04-10 11:53:01 +01:00
Martin Whitaker
4c55182cd0
Disable UHCI legacy support and make sure all UHCI registers are initialised.
...
The controller reset should set the USBINTR, FRNUM, and SOF registers to
their default values, but set them explicitly just to be sure.
2022-04-09 22:42:59 +01:00
Martin Whitaker
4761b782dd
Enable detection of keyboards attached to a UHCI controller.
2022-04-07 18:05:45 +01:00
Martin Whitaker
08bbac1065
uhci: reset the queue head after handling a keyboard interrupt.
...
When an interrupt transfer completes, the UHCI loads the QELP in the
QH with the link pointer from the TD (which is a null pointer in this
case). We need to set the QELP back to point at the TD to enable the
next interrupt transfer.
2022-04-07 17:51:27 +01:00
Martin Whitaker
75bc6822f8
uhci: set the link pointer terminate bit in the last TD in a queue.
2022-04-07 17:43:39 +01:00
Martin Whitaker
6cfb7e7e83
Miscellaneous fixes to the UHCI driver.
...
This gets us to the point that a keyboard is detected when running
QEMU with a EHCI/UHCI combination controller and the first keypress
is detected and returned.
2022-04-07 00:31:59 +02:00
Sam Demeulemeester
43302bf193
Add SPD decoding for DDR memory modules
2022-04-06 23:55:38 +02:00
Martin Whitaker
2c33aa3e85
Check for correct address space in probe_usb_controller() (issue #36 ).
...
We expect UHCI controllers to be mapped into I/O space and the other
controller types to be mapped into Memory space. Print a diagnostic
message and abort if this is not the case. Only call map_region()
for controllers mapped into Memory space.
2022-04-06 20:46:08 +01:00
Martin Whitaker
f14d1fed52
Really add the noehci boot command line option.
...
(file missed in last commit)
2022-04-06 17:31:47 +01:00
Martin Whitaker
711596edbb
Add boot command line option to ignore any EHCI controllers.
2022-04-04 22:53:39 +01:00
Sam Demeulemeester
2e048a7c61
Add support for Serial/TTY ( #32 )
...
* Add preliminary support for TTY Serial/UART (#15 )
* Use shadow_buffer instead of VGA buffer to get a framebuffer-agnostic TTY supprot
* Added menu browsing & inputs from Serial TTY (#15 )
* Add fix for degree symbol on TTY. Correct serial.c & serial.h file created with CRLF (#15 )
* Move tty_error_redraw() to insure correct redraw when a error occurs
* Many reindent / cleanup
* Various optimization from @martinwhitaker comments
2022-04-04 18:31:54 +02:00
Lionel Debroux
5cc72a6bed
Fix up the SMBIOS parser so that it doesn't perform all kinds of OOB accesses when dealing with invalid input. ( #26 )
2022-04-02 15:43:46 +02:00
Martin Whitaker
95c49848c8
Use the PRC status bit to detect when an XHCI port reset is complete (issue #31 ).
...
Some controllers do not set the PR status bit immediately after it's written,
so polling that to detect when the reset is complete is unsafe.
2022-04-02 09:28:34 +01:00
Martin Whitaker
bbfaf10240
Revert "Correct the minimum recovery time needed to reset the XHCI port ( #31 )"
...
This reverts commit a95c554c6b
2022-04-02 09:21:30 +01:00
Sam Demeulemeester
a95c554c6b
Correct the minimum recovery time needed to reset the XHCI port ( #31 )
2022-04-01 22:06:01 +02:00
Sam Demeulemeester
ee80684c4f
Separate benchmark from smbus/smbios and add a separate flag to enable/disable it
2022-04-01 20:34:52 +02:00
Sam Demeulemeester
4a20637f8e
Add support for AMD Cezanne APU (Ryzen 5000G) #21
2022-04-01 18:55:43 +02:00
Sam Demeulemeester
d356a7e3f0
Parse MADT table header with the correct struct ( #29 )
2022-04-01 13:46:04 +02:00
Martin Whitaker
c13bb30893
Fix mapping of MADT (issue #29 )
...
We need to pass the physical address of the MADT to parse_madt(), not the
virtual address of the table signature, because parse_madt() needs to call
map_region() again to ensure the full table is mapped into virtual memory.
2022-04-01 10:22:25 +01:00
