for some reason, this yields quite different results for norne than
the default variant, e.g. when comparing PRESSURE, we get
```
> compareECL -k PRESSURE -t UNRST ebos/NORNE_ATW2013 ebos_altidx/NORNE_ATW2013 1 1e-4
Comparing 'ebos/NORNE_ATW2013' to 'ebos_altidx/NORNE_ATW2013'.
Comparing PRESSURE...
Occurrence in first file = 9
Occurrence in second file = 9
Value index = 0
(first value, second value) = (254.195, 253.191)
Program threw an exception: [/home/and/src/opm-common/build-cmake/fake-src/examples/test_util/EclRegressionTest.cpp:161] Deviations exceed tolerances.
The absolute deviation is 1.00311, and the tolerance limit is 1.
The relative deviation is 0.00394624, and the tolerance limit is 0.0001.
```
IMO this is a bug, but the reasons for it are currently unknown.
these variants should cover most of the common use cases. That said,
there are no plans to provide simulators for combinations of blackoil
extensions or a "multiplexing" simulator like `flow`: If someone is
interested in e.g., an oil-water simulator with polymer and energy
enabled, a separate self-compiled executable should be added locally.
the idea is to compensate the residual of the final solution of a time
step by means of an opposing source term in the next time step.
This patch has been developed as a joint project with [at]totto82 and
[at]osae.
(`flow` is unaffected by this because for now drift compensation is an
experimental feature and thus disabled within the production
simulator.)
This enables `ebos` to run Norne and other non-trivial data
sets. While at it, adapt the tolerances by `ebos`.
This patch only affects the research simulator, i.e. `flow` is
unaffected by it.
this bitrot a bit because it was never seen by the compiler. (I still
did not check if `ebos` compiles and works if `CpGrid` is replaced by
dune-alugrid or `PolyhedralGrid`.)
the convergence behaviour can now be understood and the report step
information is printed, too. This does not affect `flow`, becase it
implements its own newton and time stepping routines.
the speedup gained by parallelism here are simply not worth the
headaches.
note that `flow` is unaffected by this because it uses
`Opm::BlackoilWellModel`.
Usage
BCRATE
1 1 1 1 1 10 X WATER 1e-7 /
This will inject 1e-7 of water (mass/time/length/length) on the x side of the
boundary cells with cartesian index [1 1 1] to [1 1 10]
this is a compile time switch with the intention to be able to more
easily turn experimental features that are not yet considered to be
production quality on and off. DUNE has a similar mechanism (i.e., the
`DUNE_GRID_EXPERIMENTAL_GRID_EXTENSIONS` macro), but it relies on
the preprocessor.
For now, the property does not have any effect.
this hopefully makes the purpose of `ebos` clear in its
description. this prose should be interpreted as "if you use ebos in
production, you are on your own and you should only expect a very
limited amount of support (or even sympathy) if something breaks".
in particular the missing synchronization after restarts was very
nasty to find. thanks a ton for pointing this out!
also, IIRC changing DR[SV]DT in the schedule section has been working
properly for a while, so the comment which stated the opposite is
removed as well.
Some time loop stuff was missing in the doobly-doo, the init() method
of the well model was not called and there was the slightly deeper
issue that the initial solutions where not calculated on restarts
which breaks everything that relies on them. (at the moment, that's
everything which is related to non-trivial boundary contitions.)
the purpose of this was a hack to be able to manipulate the Jacobian
matrix directly from outside code. Since `flow` has been converted to
the eWoms wells API, this is not required anymore.
This seems to be covered for types and functions by our coding style
with room for interpretation. For variables the coding styles asks for
underlines though, but nevermind.
The former order resulted of first apply NCC to the grid
transmissibilities and then applying EDITNNC resulted in NNCs being
scaled twices. The reason is that applyNNCToGridTrans_ scales the NNC
with EDITNNC. With the patch the order of the function calls is
reversed to prevent double scaling.
This is includes neighboring connection and NNCs due to faults. In both
cases the transmissibilities of specified via NNC are added to the set or
computed ones.
This is the first step for supporting NNC in flow.
the parameter is called `EclNewtonSumToleranceExponent`. if it is set
to 1, the specified tolerance will be used directly. (this is not
desireable in the general case though, because at the same result
quality, the sum error for large reservoirs can be larger than for
small ones.)
albeit, we scale the error only to the cube root of the pore
volume. the rationale is that the same amount of mass can get lost
"along" a line for each timestep.
maybe it would be a good idea to do something like this for time step
size as well because taking multiple small time steps currently allows
a much larger error in the result than doing it in one big step.
the flags which I used are
```
-pedantic \
-Wall \
-Wextra \
-Wformat-nonliteral \
-Wcast-align
-Wpointer-arith \
-Wmissing-declarations \
-Wcast-qual \
-Wshadow
-Wwrite-strings \
-Wchar-subscripts \
-Wredundant-decls \
-fstrict-overflow \
-O3 \
-march=native \
-DNDEBUG=1
```
note that some heavy filtering is not the worst idea because DUNE is
far from not emiting any warnings with these flags.
Also, there were some pesky warnings in test_ecl_output which I don't
know how to fix:
```
tests/test_ecl_output.cc:218:73: warning: missing initializer for member ‘Opm::data::Connection::effective_Kh’ [-Wmissing-field-initializers]
```
some weird hacks (hello, DR[SV]DT) cause a change of the storage term
in the first Newton-Raphson iteration compared to the solution of the
previous time level. In order to use the correct values, one thus must
explicitly recompute the storage term for the previous time step
instead of just reusing the result of the first Newton-Raphson
iteration of the current time step.
Previously all processes reported
Warning: Fast restart using SAVE is not supported. Standard restart file is written instead.
Now this is done only on the master process where logging is activated.
reads tracer input from deck, solves tracer equation fully implicit as a post processing step in endTimeStep
tested on a simple modified SPE1CASE1 deck and compared with eclipse
TODO: restart and parallel
this allows to assemble the Jacobian matrices directly into the native
format expected by linear solver. So far, only backends using
Dune::BCRSMatrix are provided, but there are work-in-progress patches
for dune-fem, vienna-CL and PETSc backends.
IMO the simulator should not be in the business of managing low-level
parser objects in the first place, because that's what EclipseState is
supposed to do?!
anyway, since these objects are not needed to decide which simulator
to use, they are now always managed internally by the vanguard, i.e.,
setExternalDeck() does not take them anymore.
this is similar to the mechanism for well models: the API is defined
here, but can be overloaded by downstream modules. In contrast to the
well model where the default class follows a simplistic approach the
default class for aquifiers does nothing, i.e., the actual
implemenentation must be provided by downstream.
before this patch, the parameter was registered by the problem but not
used there. Since this is quite confusing, let's move registration to
where the parameter is actually used, i.e., the vanguard.
i.e., complain when detecting foo=bar positional parameters. this is
not a bullet-proof solution because it will not work if the deck file
name contains an equals character. Anyway, it's better than before
IMO.
all disc output, i.e. VTK, restart files, ECL and -- in the future --
logfiles, goes to that directory. before this, only the ECL output
could be directed to a different than the current working directory
and the parameter for this was called "EclOutputDir".
note that the Dune VTK writing infrastructure makes it harder than it
needs to be: suddenly Dune::VTKWriter::write() does not work in
parallel anymore, but Dune::VTKWriter::pwrite() must be called with
the right arguments.
previously, the exact behaviour was dependent on wheter the
--ecl-deck-file-name parameter was defined or not. now the positional
parameter is hopefully an exact alias for the value of --ecl-deck-file-name.
the purpose is to make it exceedingly clear that ebos is not developed
by the ECL group who started ECLIPSE which is an backcronym for
"ECL's Implicit Program for Simulation Engineering" and ECL stands for
"Exploration Consultants Limited" which is now a division of
Schlumberger Limited.
thanks to [at]atgeirr for pushing this.
