Commit Graph

923 Commits

Author SHA1 Message Date
Atgeirr Flø Rasmussen
e5ff636860 Merge branch 'master' into dg-improvements 2013-01-08 16:01:52 +01:00
Atgeirr Flø Rasmussen
89516931e4 Added MinUpwindAverage limiter method, made it default. 2013-01-08 16:00:17 +01:00
Atgeirr Flø Rasmussen
53932a8184 Documented new available limiting options in constructor doc. 2013-01-08 13:34:50 +01:00
Atgeirr Flø Rasmussen
a0827ab02d Change constructor to take ParameterGroup argument.
Also make tof to limit against >= 0.0, for case when upstream cell values go
below zero.

Disabled some debug output.
2013-01-08 13:14:26 +01:00
Atgeirr Flø Rasmussen
832072a5cb Improvements to DG1 flux limiter.
Skeleton in place for increased flexibility in methods and usage.
(So far behaviour choices are hardcoded, though.)
Added relative flux thresholding to existing limiter to avoid flux noise
strongly affecting solution. For example no-flow boundaries could be treated
as inflow boundaries and make the minimum upwind face limiter meaningless.
2013-01-08 11:04:43 +01:00
Atgeirr Flø Rasmussen
6a23ebe449 Add methods sequence() and components(). 2013-01-08 11:04:07 +01:00
Atgeirr Flø Rasmussen
db7fe12a45 Simplify and correct implementation of limiter.
Now we check all corners' tof values for the cell under consideration,
not just the inflow face corners'.
2013-01-07 15:48:47 +01:00
Atgeirr Flø Rasmussen
bfa52cc5f2 Bugfix, again: it was correct to take the maximum, reinstating.
There is a different problem that needs fixing, however:
Flux inaccuracies (for example on boundaries) may tag some
face as inflow face for a cell, even if it should have been
no-flow. This may let the cell avoid limiting, even though it
should have been limited according to the proper inflow faces.
2013-01-07 15:10:43 +01:00
Atgeirr Flø Rasmussen
583c905a43 Bugfix: take minimum of allowed slopes, not maximum. 2013-01-04 19:59:05 +01:00
Bård Skaflestad
70da461a97 Merge pull request #110 from atgeirr/dg-improvements
Improvements for time-of-flight and tracer computations
2013-01-03 08:25:11 -08:00
Atgeirr Flø Rasmussen
8cb2ea4c94 Added solveTofTracer() method. 2013-01-03 14:07:51 +01:00
Atgeirr Flø Rasmussen
538e1eab5f Limiter now works reasonably well.
Case with no inflow faces should be checked.
2012-12-20 18:03:08 +01:00
Bård Skaflestad
1059611c78 Merge pull request #109 from atgeirr/dg-improvements
DG time-of-flight improvements
2012-12-19 09:09:33 -08:00
Atgeirr Flø Rasmussen
3e723bc965 Added limiter for DG1, parameter 'use_limiter'.
The limiter is experimental and unfinished, untested work in progress.
Limiter is therefore inactive by default.

Also fixed a minor bug: use_cvi_ was not initialized.
2012-12-18 14:15:31 +01:00
Atgeirr Flø Rasmussen
94b128d6b6 Bugfix: use sufficient quadrature order. 2012-12-18 14:12:56 +01:00
osae
51d2e9de0d Support for keywords ENPTVD and ENKRVD. 2012-12-17 14:02:30 +01:00
osae
28a3a0770f Scaling of relperm functions - oil/water systems.
opm/core/eclipse/EclipseGridParser.cpp
opm/core/eclipse/EclipseGridParser.hpp
- New keywords: ENDSCALE SCALECRS SWCR SWL SWU SOWCR KRW KRWR KRO KRORW

opm/core/eclipse/SpecialEclipseFields.hpp
- Parsers for ENDSCALE and SCALECRS.

opm/core/fluid/BlackoilPropertiesFromDeck.cpp
- Consistency check: ENDSCALE implemented for SatFuncSimple only.

opm/core/fluid/SatFuncGwseg.hpp
opm/core/fluid/SatFuncSimple.hpp
opm/core/fluid/SatFuncStone2.hpp
- Accomodate "default" values for scalable parameters.
- For SatFuncGwseg and SatFuncStone2 the associated functionality not
  yet supported and the variables are dummies to satisfy the compiler.

opm/core/fluid/SatFuncSimple.cpp
- Initialisation for scalable parameters.
- Evaluation of relperms: Use (1-so) for evaluation of oil-relperms.
  (For scaled arguments sw and so do not necessarily add to one.)
- TODO: SatFuncGwseg.cpp and SatFuncStone2.cpp for oil-water systems.

opm/core/fluid/SaturationPropsFromDeck.hpp
- Struct to accomodate cell-wise scaling factors.
- Two flags indicating scaling and method.
- Methods for parameter initialisation and scaled relperm computation.

opm/core/fluid/SaturationPropsFromDeck_impl.hpp
- Initialize scaling options and relevant cell-wise scaling factors.
- Relperm evaluation modified for possible end point scaling.
2012-12-07 14:52:00 +01:00
Atgeirr Flø Rasmussen
5e04ec1448 Modify precision for quadrature depending on use of CVI method. 2012-12-06 10:18:57 +01:00
Atgeirr Flø Rasmussen
534f8f8bb6 No longer ignores boundary fluxes.
This means that the class does expect source terms that are just that, and not
'transport source' terms that include boundary inflows (like the transport
solvers expect). This is also consistent with the behaviour of the DG version.
2012-12-05 10:39:00 +01:00
Atgeirr Flø Rasmussen
8fce539d3d Adapt to moved [Cell|Face]Quadrature classes.
Also fix a minor issue with potentially buggy error output after LAPACK failure.
2012-12-04 16:11:05 +01:00
Markus Blatt
87a5ba847e Merge remote-tracking branch 'upstream/master' 2012-11-22 12:48:02 +01:00
Halvor Møll Nilsen
1be0bd4a20 Corrected include statements after renaming files. 2012-11-16 16:24:54 +01:00
Halvor Møll Nilsen
4a6e10bb08 Continued renaming of transpormodels to transportsolver*reorder 2012-11-16 16:06:01 +01:00
Halvor Møll Nilsen
6b73114430 Changed name of all TransportModels which was reorder solvers 2012-11-16 16:00:56 +01:00
Halvor Møll Nilsen
74cddb0b01 Changes needed to for makeing a simulator using ImplicitTransport. Several changes in names to highlight what is reorder simulator classes 2012-11-16 13:38:03 +01:00
Halvor Møll Nilsen
cfae3edcaf Changes to try to make naming and classes more consistent. This is a start to make devide models and tranport solvers so that VE models is more easely handled 2012-11-15 13:20:49 +01:00
Atgeirr Flø Rasmussen
6324408357 Update CompressibleTpfa wellbore gravity handling.
Should now be in sync with cfs_tpfa_residual C interface. Simple well
gravity model implemented.
More flexibility in well gravity models would be a natural future extension.
2012-11-06 19:28:22 +01:00
Bård Skaflestad
ab71ea4780 Merge branch 'master' into gravity-in-wells 2012-11-05 15:48:07 +01:00
Atgeirr Flø Rasmussen
7deba2cce0 Bugfix tof computations with multidimensional upwinding.
Cell tof depends on downwind face tof in a more complicated way
with multidim upwinding, this was not done correctly.
2012-11-05 14:26:00 +01:00
Bård Skaflestad
a0c8028ea8 Account for gravity in well connection flux calculation
We previously ignored effects of gravity in the calculation of the well
connection fluxes (i.e., perforation fluxes).  This commit includes
those effects where appropriate.
2012-11-01 13:34:27 +01:00
Markus Blatt
08ecc6988c Merge remote-tracking branch 'upstream/master' 2012-10-30 16:27:49 +01:00
Halvor Møll Nilsen
e66df86e2d Changed cmake to make build without ert for now. Small change in WellsManager.cpp 2012-10-30 14:51:12 +01:00
Halvor Møll Nilsen
ae05d3d7e8 Merge from upstream and corrected conflictes. 2012-10-30 13:38:55 +01:00
Halvor Møll Nilsen
036cfacea4 changes to be able to use black oil properties even if rock do not match current grid 2012-10-30 13:28:22 +01:00
Atgeirr Flø Rasmussen
a124d2e3be Implemented multidimensional upwinding.
The 'SMU' variant is chosen for its smoothness.
2012-10-30 13:10:50 +01:00
Atgeirr Flø Rasmussen
bd013a7d4d Added parameters for controlling use of multidim upwinding.
For now, you will simply get SPU even with use_multidim_upwind=true.
2012-10-29 17:23:17 +01:00
Bård Skaflestad
7406847201 Merge branch 'master' into gravity-in-wells 2012-10-25 10:44:17 +02:00
Atgeirr Flø Rasmussen
17ffcc77aa Merge pull request #84 from bska/fix-equality-comparisons
Fix well classification that was only correct by accident
2012-10-25 01:08:48 -07:00
Bård Skaflestad
f9fe3322b6 Merge branch 'master' into gravity-in-wells 2012-10-24 22:43:25 +02:00
Roland Kaufmann
28661b7342 Remove superfluous construction by std::make_pair
Since we know the type of the components, we may just as well create the
pair directly! (Using make_pair invokes compiler bugs in GCC).
2012-10-24 21:22:11 +02:00
Bård Skaflestad
0c599b8868 Fix well classification that was only correct by accident
Specifically, the tests

   if (!wells->type[self_index] == INJECTOR)
   if (!wells->type[self_index] == PRODUCER)

produced the expected results *only* because INJECTOR==0 and PRODUCER==1
in the WellType enumeration, thus (!INJECTOR == PRODUCER) and
(!PRODUCER == INJECTOR).

Installing the (much) more appropriate

    if (wells->type[self_index] != INJECTOR)
    if (wells->type[self_index] != PRODUCER)

is not only more readable, it is also future-proof and scales better if
we ever introduce new WellTypes (e.g., a MONITOR).
2012-10-24 21:12:29 +02:00
Bård Skaflestad
98fd1f05dd Merge branch 'master' into gravity-in-wells 2012-10-24 10:09:31 +02:00
Roland Kaufmann
d8dd982408 Make GCC 4.6.3 happy in C++0x mode
It complains about not finding a match for the pair<> template class,
because the first parameter (this) is allegedly const. However, this
isn't a const method, so I suspect it is a compiler bug.

In order to move on, I slap on a harmless cast which will make this
particular compiler happy, and which should have no effects elsewhere,
but put it in a #if..#else..#endif macro to avoid warnings on others;
hopefully this also makes it easier to spot and remove in the future.
2012-10-24 09:57:12 +02:00
Bård Skaflestad
8e38cd5f5c Merge branch 'master' into gravity-in-wells 2012-10-17 13:30:37 +02:00
Atgeirr Flø Rasmussen
88af4a4ce3 Fix output in case of LAPACK error.
Make copy of matrix before calling dgesv, since it will overwrite it.
2012-10-17 12:40:43 +02:00
Bård Skaflestad
5afc290604 Don't compare floating point numbers for equality. 2012-10-16 21:48:38 +02:00
Bård Skaflestad
75f7a725b3 Update documentation accompanying CompletionData structure.
Specifically, the 'wdp' member is a scalar value at each well
connection.  Phase behaviour is incorporated through other means.
2012-10-16 14:05:33 +02:00
Bård Skaflestad
8a8c29f5ce Rename CompletionData::gpot -> wdp .
This is in preparation of implementing actual gravity support in
(compressible) well-pressure solution.
2012-10-16 13:55:07 +02:00
Atgeirr Flø Rasmussen
49af5dcd7b Use new velocity interpolation interface.
The class TransportModelTracerTofDiscGal now uses
VelocityInterpolationInterface, and acts as a factory
internally, choosing an interpolation method depending on
the parameter 'use_cvi'.
2012-10-16 11:11:33 +02:00
Bård Skaflestad
10604d237b Document public interface of compr_source module.
This is Doxygen-style reference documentation only.
2012-10-15 19:49:23 +02:00
Bård Skaflestad
80a14f849b Reformat to add Doxygen markup where appropriate 2012-10-15 19:15:31 +02:00
Bård Skaflestad
30cb6eaf7f Document public interface of compr_quant_general module
This is Doxygen-style reference documentation only.
2012-10-15 16:08:17 +02:00
Bård Skaflestad
f35663130a Document public interface of cfs_tpfa_residual module
This is Doxygen-style reference documentation only.
2012-10-15 15:21:27 +02:00
Bård Skaflestad
d3f85ea60c Merge remote-tracking branch 'upstream/master' into ert
Conflicts:
	Makefile.am
	opm/core/grid/cpgpreprocess/preprocess.h
	tests/Makefile.am

This brings ert branch up-to-date with current Github master branch.
2012-10-12 00:43:51 +02:00
Markus Blatt
230c6320eb Merge branch 'master' of https://github.com/OPM/opm-core 2012-10-11 11:25:25 +02:00
Atgeirr Flø Rasmussen
ca15ce6eec Fix comment. 2012-10-10 14:12:38 +02:00
Atgeirr Flø Rasmussen
89eee7e220 Bugfix: order of function arguments.
Order of arguments for computePhaseFlowRatesPerWell() was wrong.
This fix was done previously for SimulatorCompressibleTwophase,
but the incompressible sim was ignored.

Also added an ASSERT that may help catch some misuse.
2012-10-10 14:09:09 +02:00
Atgeirr Flø Rasmussen
c8498b76b6 Merge pull request #59 from kristinf/dev
sign error in total_produced

Looks correct.
2012-10-10 04:49:06 -07:00
Markus Blatt
b296a4488e Merge remote-tracking branch 'upstream/master' 2012-10-10 10:25:25 +02:00
kristinf
a740bcfe5f sign error in total_produced 2012-10-09 15:23:56 +02:00
Atgeirr Flø Rasmussen
31d17a0dcd Whitespace cleanup. 2012-10-09 12:21:17 +02:00
Atgeirr Flø Rasmussen
76259dcd0f Improve docs and give more info on error. 2012-10-09 09:54:54 +02:00
Atgeirr Flø Rasmussen
36721602b2 Add timing of topological sort. 2012-10-09 09:54:26 +02:00
Atgeirr Flø Rasmussen
256a5496b1 Merge branch 'master' into reorder_tof 2012-10-08 16:16:05 +02:00
Atgeirr Flø Rasmussen
9e90dcebe5 Fix sign of production rate controls.
In the Wells struct, production rate control targets must be negative
(and injection rate control targets are always positive).
In the WellsGroup classes, there are separate variables for injection
and production, and all rates are positive. Therefore, upon adding or
modification of a production rate control, the negated value must
be used.
2012-10-08 14:27:56 +02:00
Atgeirr Flø Rasmussen
a635140500 Merge branch 'master' into reorder_tof 2012-10-08 13:52:59 +02:00
Bård Skaflestad
d6154d8961 Clone wells object when constructing from existing.
This installs a measure of safety on the part of the interface in that
the caller is free to dispose of the wells object upon returning from
the WellsManager constructor.
2012-10-05 10:15:06 +02:00
Halvor Møll Nilsen
044c13e9fb Added constuctor to WellManager which used Wells struct. 2012-10-05 10:14:55 +02:00
Bård Skaflestad
e5c5a64a4a New function clone_wells()
Used to create a deep copy (clone) of an existing Wells object.

While here, add test case for common Wells object operations.
2012-10-05 10:14:44 +02:00
Markus Blatt
7957198131 Merge remote-tracking branch 'upstream/master' 2012-10-05 10:11:59 +02:00
Atgeirr Flø Rasmussen
108589a286 Merge branch 'master' into reorder_tof 2012-10-05 09:20:37 +02:00
Bård Skaflestad
24504875ea Reference <grid.h> from canonical location.
The header was removed from this directory upon import from the
preexisting "opmtransport" repository.
2012-10-05 00:56:12 +02:00
Bård Skaflestad
4d488c98a7 Unequivocally exclude MATLAB timing printing.
It is not actually needed and prevents building when symbol
MATLAB_MEX_FILE is defined.
2012-10-05 00:53:59 +02:00
Markus Blatt
de1e709476 Merge remote-tracking branch 'upstream/master' 2012-10-03 20:01:05 +02:00
Markus Blatt
1105c9b540 Make number of smoothing steps and scaling factor for prolongation of AMG adjustable 2012-10-03 20:01:00 +02:00
Atgeirr Flø Rasmussen
6f31f059d7 Merge branch 'master' into reorder_tof 2012-10-03 10:05:53 +02:00
Atgeirr Flø Rasmussen
a9783eefc7 Add explanatory comment. 2012-10-02 15:46:33 +02:00
Atgeirr Flø Rasmussen
5acbf00b14 Update compressible transport solver for new src convention.
Namely, that inflowing transport sources are water *surface* volumes,
not water *reservoir* volumes.
2012-10-02 14:37:18 +02:00
Atgeirr Flø Rasmussen
4f276a8870 Bugfix: size of vector for A should be np*np. 2012-10-02 14:35:28 +02:00
Atgeirr Flø Rasmussen
017663cc5b Change interface for (blackoil) computeInjectedProduced().
Also use new computeInjectedProduced() and computeTransportSource()
functions in SimulatorCompressibleTwophase.
2012-10-02 11:12:23 +02:00
Atgeirr Flø Rasmussen
17c1be6541 Modified functions dealing with transport source.
In preparation for switching to new convention for inflow
sources in the compressible case: source being surface volumes,
not reservoir volumes.
2012-10-01 16:40:47 +02:00
Atgeirr Flø Rasmussen
6fb248d403 Update WellState::perfPress() after pressure solve. 2012-10-01 16:40:10 +02:00
Atgeirr Flø Rasmussen
0eb54ca90a Added perfPress() to WellState. 2012-10-01 16:39:35 +02:00
Atgeirr Flø Rasmussen
78835b57b8 Merge branch 'master' into ert 2012-09-30 15:08:49 +02:00
Atgeirr Flø Rasmussen
f6b2306dab Work in progress: degree 2 quadratures.
Also, changed quadrature degrees used to get exact quadratures for all terms.
2012-09-28 14:44:04 +02:00
Atgeirr Flø Rasmussen
cf38936c99 Merge branch 'master' into reorder_tof 2012-09-27 11:19:56 +02:00
Atgeirr Flø Rasmussen
d83ab5856d Fix: forgotten multiply by cell volume in a quadrature. 2012-09-27 09:49:36 +02:00
Atgeirr Flø Rasmussen
04a76988d9 Add sink term contribution. 2012-09-26 15:15:04 +02:00
Atgeirr Flø Rasmussen
93094ebeec Fix argument order in call. 2012-09-26 14:21:00 +02:00
Atgeirr Flø Rasmussen
99a12a7edc Initial version of DG(1) for tof implemented.
Basis functions, quadratures and velocity interpolation are basic versions,
not handling any higher than DG(1) for now. These are currently in helper
classes and functions. The code in the main solver class is written with
the aim of supporting DG(n) generally.
2012-09-26 13:30:54 +02:00
Bård Skaflestad
fb8e79857c Add tentative implementation of surface-rate targets.
Not tested at present.
2012-09-26 10:14:45 +02:00
Atgeirr Flø Rasmussen
bbc5ed5c68 Merge branch 'master' into reorder_tof 2012-09-26 09:08:26 +02:00
Atgeirr Flø Rasmussen
6a01298312 Merge branch 'master' into ert
Conflicts:
	Makefile.am
2012-09-26 09:07:57 +02:00
Atgeirr Flø Rasmussen
1a227dbf86 Added skeleton of general order DG tof solver. 2012-09-26 08:58:03 +02:00
Atgeirr Flø Rasmussen
b9a2c14113 Add proper support for source terms.
This fixes the problem with infinite tofs at sinks.
2012-09-25 14:00:17 +02:00
Atgeirr Flø Rasmussen
ddf177b4c5 Merge branch 'master' into reorder_tof 2012-09-25 10:13:46 +02:00
Atgeirr Flø Rasmussen
9f69e9fa51 Guard against input error.
If no valid threephase_model is input, throw instead of crashing.
2012-09-24 17:09:50 +02:00
Atgeirr Flø Rasmussen
56e81968e3 Add support for new three-phase relperm option to BlackoilPropertiesFromDeck.
New parameter option added: 'threephase_model' can now be 'gwseg'.
2012-09-24 16:43:00 +02:00
Roland Kaufmann
ab21d44c9a Disable warning for using DUNE's FieldVector::size
In DUNE 2.2 FieldVector::size changed from being a member to being a
method. A compatibility warning is issued if you include the relevant
headers.

This warning can be silenced for DUNE modules by using passing the
option --enable-fieldvector-size-is-method to ./configure. This patch
effectively does the same, but through a macro definition.
2012-09-24 00:21:06 +02:00
Bård Skaflestad
271b0d800c Merge remote-tracking branch 'upstream/master' into fix-impedance-mismatch 2012-09-20 15:49:59 +02:00
Bård Skaflestad
b137eb0b65 Interpret `wells != 0 && wells->W == 0'' as `no wells''.
The CompressibleTpfa class always passes a non-null `forces->wells'
object to the constructor, assembly, and reconstruction routines but
uses ``forces->wells->W == 0'' to signify a simulation model without
wells.  This is, arguably, an error in the CompressibleTpfa class but
one that does not require a lot of work to support in the
cfs_tpfa_residual module.

Insert the extra tests in an effort to honour the ``liberal in what you
accept, strict in what you produce'' principle.
2012-09-20 15:48:48 +02:00
Bård Skaflestad
bdcd5236bd Don't crash on models without wells.
The user will legitimately want to run models that do not specify wells
(e.g., using boundary conditions).  While we do not yet fully support
that configuration (no wells), we absolutely must not crash by
dereferencing null pointers or generating pointers into ::empty()
std::vector<>s.

This commit installs the required guards needed to avoid said failure
mode.
2012-09-20 15:03:38 +02:00
Atgeirr Flø Rasmussen
e3388575d6 Fix treatment of WELOPEN keyword.
Now you can actually shut and open wells with WELOPEN. The following
caveats apply:
 - this may interact improperly with group controls,
 - dynamic usage of WCONINJE/WCONPROD should not be mixed with WELOPEN.
2012-09-20 14:35:03 +02:00
Atgeirr Flø Rasmussen
50a23c0f5d Support shut wells in compressible tpfa solver. 2012-09-20 14:34:33 +02:00
Atgeirr Flø Rasmussen
2017481a58 Improve diagnostic output if crossflow is detected. 2012-09-20 14:33:57 +02:00
Atgeirr Flø Rasmussen
8dc958044f Merge branch 'master' into ert 2012-09-18 09:18:40 +02:00
Atgeirr Flø Rasmussen
65447604ae Typo fix. 2012-09-14 20:56:08 +02:00
Atgeirr Flø Rasmussen
67b5f007fd Made initialization from SWAT/SGAS etc. more robust and general. 2012-09-14 10:40:36 +02:00
Atgeirr Flø Rasmussen
fa6b772972 Changed well initialization and property calculation.
Bhp is now initialized to bhp target for bhp-controlled wells.
Mobilities and pvt properties are now calculated from
well perforation pressure and injection specifications for
injectors, producers still use cell properties as before.
2012-09-14 09:53:11 +02:00
Atgeirr Flø Rasmussen
bdcf0291e0 Fix error message. 2012-09-14 09:52:13 +02:00
Atgeirr Flø Rasmussen
026863c95d Merge branch 'master' into reorder_tof 2012-09-05 14:21:47 +02:00
Xavier Raynaud
680276debf Fixed documentation. 2012-09-05 14:07:51 +02:00
Atgeirr Flø Rasmussen
9c77d12f8d Merge branch 'master' into ert
Conflicts:
	Makefile.am
	configure.ac
	examples/Makefile.am
	opm/core/GridManager.cpp
	opm/core/eclipse/EclipseGridParser.cpp
	opm/core/grid/cpgpreprocess/preprocess.h
	tests/Makefile.am
2012-09-05 13:36:19 +02:00
Xavier Raynaud
3eda90b7e6 Merge remote-tracking branch 'upstream/master' 2012-09-05 13:35:48 +02:00
Xavier Raynaud
1d98e043a5 Fixed source term (measured at reservoir conditions). 2012-09-05 13:34:25 +02:00
Atgeirr Flø Rasmussen
fa2fc1e914 Merge branch 'master' into reorder_tof 2012-09-05 12:32:38 +02:00
Halvor Møll Nilsen
0f3423cbf4 Added constuctor to WellManager which used Wells struct. 2012-09-05 11:47:38 +02:00
Atgeirr Flø Rasmussen
0f91bc6a34 Massive whitespace cleanup: entire fluid subdir. 2012-09-05 11:28:54 +02:00
Xavier Raynaud
32e1ae249d Merge remote-tracking branch 'upstream/master' 2012-09-05 10:11:02 +02:00
Xavier Raynaud
3d01a60099 Changed solvegravity interface. Fixed bug. 2012-09-05 10:10:02 +02:00
Xavier Raynaud
8c68fd0373 Add initial guess in root solver for gravity residual. 2012-09-04 15:13:55 +02:00
Xavier Raynaud
55793cc909 Use same search interval in computation of flux and gravity residuals. 2012-09-04 15:01:14 +02:00
Xavier Raynaud
ff78e358f0 Removed unappropriate conversion from water saturation to complete saturation. 2012-09-04 14:22:56 +02:00
Xavier Raynaud
876d23942c Use porevolume of last step in computation of gravity residual. 2012-09-04 14:21:51 +02:00
Bård Skaflestad
abd8973382 Merge remote-tracking branch 'upstream/master' 2012-09-04 13:58:43 +02:00
Atgeirr Flø Rasmussen
f68c289e9d Merge branch 'master' into nonuniform_fluid_tables
Conflicts:
	opm/core/fluid/BlackoilPropertiesFromDeck.cpp
	opm/core/fluid/BlackoilPropertiesFromDeck.hpp
	opm/core/fluid/SaturationPropsFromDeck.cpp
2012-09-04 13:34:30 +02:00
Atgeirr Flø Rasmussen
23ae62f8dc Constified some local variables. 2012-09-04 13:15:26 +02:00
Atgeirr Flø Rasmussen
0f9d572f9a Fix stride bug in WellReport::push(). Use convert::to(). 2012-09-04 13:12:06 +02:00
Atgeirr Flø Rasmussen
14aab769f2 Fix stride bug in SGAS/SWAT init. 2012-09-04 13:06:13 +02:00
Atgeirr Flø Rasmussen
7c7609698f Added proper Doxygen tags. 2012-09-04 12:52:17 +02:00
Atgeirr Flø Rasmussen
0101e1f575 Updated doc to match new parameter names.
New parameters are (default):
    pvt_tab_size (200)
    sat_tab_size (200)
    threephase_model ("simple") [also accepts "stone2"].
2012-09-04 11:49:05 +02:00
Atgeirr Flø Rasmussen
03f6f43160 Merge branch 'master' into nonuniform_fluid_tables
Conflicts:
	Makefile.am
	opm/core/fluid/BlackoilPropertiesFromDeck.hpp
	opm/core/fluid/SaturationPropsFromDeck.cpp
	opm/core/fluid/SaturationPropsFromDeck.hpp
	opm/core/fluid/blackoil/BlackoilPvtProperties.cpp
	opm/core/fluid/blackoil/BlackoilPvtProperties.hpp
	opm/core/fluid/blackoil/SinglePvtDead.cpp

This merge combines three more-or-less orthogonal features
for saturation tables: the option to use StoneII or Simple
three-phase behaviour, the option to fit a spline or not,
and finally setting the number of samples used (if spline
fitting).

Interfaces have changed, the most top-level one being
that BlackoilPropertiesFromDeck::init() now also takes
a ParameterGroup argument.
2012-09-04 11:42:31 +02:00
Atgeirr Flø Rasmussen
e9c4c2499c Documented parameters. 2012-09-03 15:09:55 +02:00
Atgeirr Flø Rasmussen
4e1647bb62 Formatting fixes. 2012-09-03 15:07:03 +02:00
Atgeirr Flø Rasmussen
489501b49b Documented new constructor. Fixed layout. 2012-09-03 14:16:54 +02:00
Atgeirr Flø Rasmussen
c2d41a6639 Whitespace cleanup and adding a check for #phases <= 3. 2012-09-03 14:04:52 +02:00
Atgeirr Flø Rasmussen
913054c473 Added more checks in 3-phase init code. 2012-09-03 13:54:50 +02:00
Atgeirr Flø Rasmussen
c409fcccce Merge remote-tracking branch 'hnil/master' 2012-09-03 13:40:33 +02:00
Bård Skaflestad
ca428559ab Merge remote-tracking branch 'upstream/master' 2012-09-03 13:27:50 +02:00
Atgeirr Flø Rasmussen
109ba09d9d Merge branch 'master' into nonuniform_fluid_tables 2012-09-03 13:12:11 +02:00
Xavier Raynaud
a8cb519d4e Fixed comment. 2012-09-03 12:26:22 +02:00
Xavier Raynaud
0701daa4dc Improve documentation. 2012-09-03 11:29:48 +02:00
Halvor Møll Nilsen
2dede29f20 Introduced posibility to change number of sample points for pvt.
Did change the PVTW calculation so derivatives are exact.
Extended the test functions for pvt and relperm
2012-08-31 17:01:07 +02:00
Xavier Raynaud
b4a4e297a8 Added functionality to compute porosity for compressible fluid. 2012-08-29 10:54:21 +02:00
Halvor Møll Nilsen
6852be422c Added new SatFuncSimple fluid.
Introduced a simple fluid which has no problem with strange black oil behavior.
Intended for testing, but for now it is used in SaturationPropsFromDeck.
2012-08-28 16:41:06 +02:00
Halvor Møll Nilsen
94c04f343d Added param initializer on fluids with param to addjust table length.
Moved internal class SatFunc to SatFuncStone2.
2012-08-28 14:27:14 +02:00
Xavier Raynaud
9aa349b1e5 Corrected comment. 2012-08-28 13:12:54 +02:00
Atgeirr Flø Rasmussen
7a79bd1872 Enable choice of spline-smoothed saturation props (or not). 2012-08-27 17:56:01 +02:00
Atgeirr Flø Rasmussen
214546ece9 Merge branch 'master' into reorder_tof 2012-08-27 17:02:50 +02:00
Atgeirr Flø Rasmussen
d9cff689b4 Added class SinglePvtDead, add parameter 'props_use_spline' to simulators.
Recall that the class that used to be called SinglePvtDead has
been renamed to SinglePvtDeadSpline. If 'props_use_spline' is true,
that class is used (this is the default), which makes a monotone
spline that is uniformly, densely sampled. The new class simply
uses linear interpolation in the input tables.
2012-08-27 16:48:21 +02:00
Bård Skaflestad
bf70195448 Merge remote-tracking branch 'upstream/master' 2012-08-27 15:37:07 +02:00
Xavier Raynaud
22372710b8 Merge remote-tracking branch 'atgeirr/master' 2012-08-27 13:32:55 +02:00
Xavier Raynaud
af8a6fa7da Changed private->protected and added virtual to make class derivation. 2012-08-27 13:19:04 +02:00
Atgeirr Flø Rasmussen
5182fef48d Switch loop ordering for better cache performance. 2012-08-27 13:17:27 +02:00
Halvor Møll Nilsen
cf9b9cdf20 Started work on supporting 3 phases for wellreport. 2012-08-27 12:22:32 +02:00
Halvor Møll Nilsen
9ef6014964 Addes support for initialisation of three phases using SWOF and SGOF 2012-08-27 12:20:03 +02:00
Atgeirr Flø Rasmussen
931dcc4a3d Implemented rudimentary solveMultiCell().
Simply calls solveSingleCell() once for each cell in block.
2012-08-27 11:26:51 +02:00
Atgeirr Flø Rasmussen
9bb76d74cc Fixed bug in matrix multiplication (matrix has Fortran element order). 2012-08-27 11:19:22 +02:00
Atgeirr Flø Rasmussen
0a8ac1ddb5 Minor revision, mostly whitespace cleanup and comments. 2012-08-27 09:48:06 +02:00
Bård Skaflestad
a8d75d2b25 Reference <grid.h> from canonical location.
The header was removed from this directory upon import from the
preexisting "opmtransport" repository.
2012-08-24 20:31:13 +02:00
Bård Skaflestad
c2a0b51365 Unequivocally exclude MATLAB timing printing.
It is not actually needed and prevents building when symbol
MATLAB_MEX_FILE is defined.
2012-08-24 20:31:13 +02:00
Halvor Møll Nilsen
6390cceaa2 Corrected typing pointed out by atgeirr in respose to pullrequest 2012-08-24 20:31:13 +02:00
Halvor Møll Nilsen
7ee5d5e403 added writing of reorder iterations for each cell 2012-08-24 20:31:13 +02:00
Atgeirr Flø Rasmussen
3e9cc74922 Initial commit of tof computation by reordering. 2012-08-24 16:08:26 +02:00
Halvor Møll Nilsen
0da049f4c8 Corrected mistake from moving function calls. 2012-08-24 13:39:42 +02:00
Atgeirr Flø Rasmussen
46fb488410 Minor code cleanup in TransportModelTwophase. 2012-08-24 13:31:23 +02:00
Atgeirr Flø Rasmussen
3dfb2eb29b Merge remote-tracking branch 'upstream/master'
Conflicts:
	opm/core/simulator/SimulatorIncompTwophase.cpp
2012-08-24 13:31:05 +02:00
Halvor Møll Nilsen
a26c6779c6 Corrected typing pointed out by atgeirr in respose to pullrequest 2012-08-24 12:52:41 +02:00
Atgeirr Flø Rasmussen
c7bbf1146c Removed unneeded function numGlobalCells(). 2012-08-24 08:18:59 +02:00
Atgeirr Flø Rasmussen
caff665c10 Fixed solveGravity(): now properly modifies surfacevolume.
Also:
  - solveGravity() interface changed to take surface volume as a parameter,
  - gravity vector is now given in initGravity() instead of
    solveGravity(), for consistency with the incompressible solver.
2012-08-23 14:45:23 +02:00
Atgeirr Flø Rasmussen
73949f892e New singularPressure() method propagates singularity information. 2012-08-23 14:03:20 +02:00
Atgeirr Flø Rasmussen
983a29691c Function cfs_tpfa_residual_assemble() and friends now return singularity flag.
The singularity flag is true if there are no pressure conditions and no
compressibility (so the absolute values of the pressure solution will be
arbitrary).
2012-08-23 14:00:04 +02:00
Atgeirr Flø Rasmussen
e96421dbd7 Whitespace cleanup. 2012-08-23 08:59:09 +02:00
Atgeirr Flø Rasmussen
96327164cc Added computeSurfacevol() method.
The method is called by the reordering transport solver after computing
new saturations in order to update the surface volumes.
2012-08-23 08:57:48 +02:00
Atgeirr Flø Rasmussen
010715ad03 Document and check (primitive) for non-miscibility requirement. 2012-08-22 12:31:59 +02:00
Atgeirr Flø Rasmussen
2f03664408 Merge branch 'rock_comp_tpfa' 2012-08-22 11:13:16 +02:00
Xavier Raynaud
9ed0923279 Update surface volume in transport solver. 2012-08-22 10:11:32 +02:00
Xavier Raynaud
660f14df3b Corrected bug (residual should not be divided by dt). 2012-08-21 17:12:07 +02:00
Xavier Raynaud
52ab67201d Changed way to get total number of cells. 2012-08-21 17:10:49 +02:00
Xavier Raynaud
712ccb0309 Corrected typo in comment. 2012-08-21 17:09:19 +02:00
Halvor Møll Nilsen
5743225be2 added writing of reorder iterations for each cell 2012-08-21 15:23:46 +02:00
Xavier Raynaud
7e1e1e7951 Fixed sign error and replaced porevol->porevol0. 2012-08-21 10:20:59 +02:00
Halvor Møll Nilsen
50ff22141d Added writing of timings in param format 2012-08-21 09:57:36 +02:00
Xavier Raynaud
b470ab8d50 Fix initialization bug. 2012-08-20 15:18:24 +02:00
Atgeirr Flø Rasmussen
aa47b1511c Merge branch 'master' into rock_comp_tpfa 2012-08-17 12:55:41 +02:00
Atgeirr Flø Rasmussen
ded1424cc9 Whitespace cleanup. 2012-08-17 12:40:15 +02:00
Atgeirr Flø Rasmussen
61fdf4a8b6 Bugfix: call *comprock* method only if active rock compressibility. 2012-08-17 10:56:27 +02:00
Atgeirr Flø Rasmussen
d67f49bac8 Class CompressibleTpfa now handles rock compressibility. 2012-08-17 10:38:41 +02:00
Atgeirr Flø Rasmussen
547efbe7d1 Added function cfs_tpfa_res_comprock_assemble().
This is intended to handle cases with both fluid and rock compressibility.
2012-08-17 10:36:57 +02:00
Atgeirr Flø Rasmussen
6fb1078cba Merge remote-tracking branch 'upstream/master' 2012-08-14 15:27:30 +02:00
Atgeirr Flø Rasmussen
ec13b11f9d Merge remote-tracking branch 'upstream/master' 2012-08-14 11:31:54 +02:00
Atgeirr Flø Rasmussen
f90f313af6 Gravity segregation column solver for compressible case implemented. 2012-08-14 11:25:59 +02:00
Bård Skaflestad
7cad95c6c7 Restore coding conventions.
Inadvertently lost in commit 064184b.
2012-08-14 11:05:09 +02:00
Halvor Møll Nilsen
1f7ec7fa39 Changed to extrapolation outside tables for pormult. Added facetags to the grid structure. Changed default fluid to Linear. 2012-08-14 09:36:19 +02:00
Atgeirr Flø Rasmussen
497c45b78b Constructors of *FromDeck classes now take an UnstructuredGrid.
This is a change from taking a vector containing the mapping to
deck-consistent logical cartesian indices. The mapping is contained
in the UnstructuredGrid::global_cell member, and may be null. The
change therefore saves the overhead of constructing a vector as a
copy of the data in the grid or (if null) as an identity mapping.
2012-08-10 10:12:45 +02:00
Atgeirr Flø Rasmussen
6ab7487218 Whitespace cleanup. 2012-07-19 15:34:42 +02:00
Atgeirr Flø Rasmussen
937b85e88f Bugfix in CompressibleTpfa for gravity case.
Gravity acceleration should be a factor in the face gravity potential.
2012-07-19 14:45:15 +02:00
Atgeirr Flø Rasmussen
eb7d46accf Transport solver partially complete (segregation solver remains). 2012-07-19 14:02:26 +02:00
Bård Skaflestad
52a5aabf57 Use have_boost_redef.hpp rather than direct override. 2012-07-12 14:36:36 +02:00
Bård Skaflestad
81f4ab5dd9 Add partial Doxygen markup to public interfaces.
More work needed.
2012-07-03 01:30:18 +02:00
Bård Skaflestad
527f2aef52 Initialise all members in default constructor. 2012-07-02 17:44:16 +02:00
Joakim Hove
368e1813a1 Using Datamapper.h in writeVtkData 2012-06-28 13:20:18 +02:00
Bård Skaflestad
0d3b2abc6a Anchor Doxygen comments to current line.
Existing mark-up (/** ... */) would erroneously apply the documentation
of one field to the one below.  Using /**< ... */ avoids this problem.

Found by reading the Doxygen manual more carefully...
2012-06-26 11:44:30 +02:00
Bård Skaflestad
e5e23de0c0 Document the obsolescent well representation.
It is still in use by the hybridised pressure solvers.
2012-06-25 00:55:50 +02:00
Bård Skaflestad
ffb538fce0 Add Doxygen-style documentation to all interfaces. 2012-06-24 03:59:18 +02:00
Bård Skaflestad
b9c9f9fbe8 Reference module headers from canonical location. 2012-06-22 19:39:52 +02:00
Bård Skaflestad
dd67e0c717 Insert another <CODE></CODE> pair that was missing. 2012-06-22 15:44:39 +02:00
Bård Skaflestad
77cd800b0c Merge from upstream. 2012-06-22 15:41:37 +02:00
Bård Skaflestad
1256fb4389 Refine description of csrmatrix_new_elms_pushback()
While here, tighten the distinction between <CODE> and non-<CODE>
mark-up.
2012-06-22 15:37:50 +02:00
Bård Skaflestad
ff96f386dc Use canonical include path to reference header. 2012-06-22 10:17:34 +02:00
Bård Skaflestad
469ddb0468 Re-wrap Doxygen comments introduced in cset 6d9f8b35dd4e. 2012-06-22 02:07:02 +02:00
Bård Skaflestad
3659ca2d68 Document sparse matrix interface. 2012-06-22 02:03:41 +02:00
Halvor M. Nilsen
c7d252f94a Mearge from upstream 2012-06-20 13:11:46 +02:00
Halvor M. Nilsen
ccbc1d83d5 Changed default for relperm to not set. 2012-06-20 13:11:13 +02:00
Bård Skaflestad
c1c76a48b6 Restore a blank line that was lost in an earlier cset. 2012-06-20 00:38:47 +02:00
Bård Skaflestad
ecda277cb0 Slight normalisation and clean-up of coding style.
Notably:
  * Replace all remaining <tab>s with (8) spaces.
  * Use post-increment for all counters.
  * Insert a number of blank lines to highlight important groups.
2012-06-19 18:37:26 +02:00
Halvor M. Nilsen
ace7ebeed9 Merge from upstream 2012-06-19 13:38:51 +02:00
Halvor M. Nilsen
d1f1af8854 Added inizialization of ok, which correct error for solves without wells. The only thing which is check is if the well object have incompressible form. 2012-06-19 13:37:22 +02:00
Bård Skaflestad
fe9cc7f29a Prune an unused header. 2012-06-19 09:34:34 +02:00
Bård Skaflestad
c4342bd16b *Control::mode(): Defer control-mode look-up to std::map. 2012-06-19 00:30:32 +02:00
Bård Skaflestad
7fc7972e93 Sort includes. 2012-06-19 00:01:30 +02:00
Bård Skaflestad
5ad262ec84 *Control::mode(): Defer keyword look-up to std::find() algorithm.
This is simpler than implementing our own version of the same.
2012-06-18 15:21:27 +02:00
Bård Skaflestad
1795e6b1a7 Document add_well()s "name" parameter.
Forgotten in cset 728302a69229.
2012-06-18 10:18:14 +02:00
Bård Skaflestad
6fbf50827f Add support for storing well names in "Wells" structure.
The well name must be passed as a parameter to add_well(), so update
callers accordingly.
2012-06-18 10:15:53 +02:00
Kjetil Olsen Lye
dec0e60bd4 Removed errors on trying to open a shut well (or shut an open well). 2012-06-15 15:16:32 +02:00
Kjetil Olsen Lye
068cbf0605 Handle WellOpen has both open and shut. 2012-06-15 14:29:43 +02:00
Kjetil Olsen Lye
1a37c410fc Made the grouptree respect the new convention of tilde. 2012-06-15 14:08:28 +02:00
Kjetil Olsen Lye
6f22704406 Correct a const error. 2012-06-15 13:57:35 +02:00
Kjetil Olsen Lye
c0717c0f7c Added welshut for production wells. Also added wellopen-handling. 2012-06-15 13:49:58 +02:00
Kjetil Olsen Lye
2a631282fc Added initial shutting of injection wells. 2012-06-15 13:38:07 +02:00
Atgeirr Flø Rasmussen
4689dd2af7 Fix output from SimulatorReport. 2012-06-15 10:51:34 +02:00
Atgeirr Flø Rasmussen
f452c4c33c WellsManager now handles multiple WELSPECS, WCONINJE, WCONPROD-lines referring to the same well.
This is mostly relevant for schedule handling. The last occurence of a well
is the one used.
2012-06-15 10:12:36 +02:00
Atgeirr Flø Rasmussen
98de826397 Moved SimulatorReport class into its own file, for reusability. 2012-06-14 14:13:03 +02:00
Halvor M. Nilsen
5a055ee933 Fixed one use of wells, when wells=NULL 2012-06-14 09:06:58 +02:00
Atgeirr Flø Rasmussen
ba4ba17736 Merged. 2012-06-13 19:45:32 +02:00
Atgeirr Flø Rasmussen
29a400d622 Enable inheritance from IncompTpfa for limited purposes. 2012-06-13 19:45:23 +02:00
Bård Skaflestad
cc054d474d computeFractionalFlow(): Reuse the output array in all intermediate calculations.
This eliminates a number of free-store operations and data movements.
2012-06-13 17:07:56 +02:00
Atgeirr Flø Rasmussen
e041407c81 Bugfixes: correct sign for pressure increment, initialise rock_comp. 2012-06-13 10:34:15 +02:00
Atgeirr Flø Rasmussen
4e4e652279 Added constructor for incompressible cases.
Also added computeStaticData() helper called by both constructors.
It is still possible to use the other constructor for an incompressible case,
by passing a null pointer for the rock_comp argument.
2012-06-12 15:24:31 +02:00
Atgeirr Flø Rasmussen
c7a9e84be6 Reindent. 2012-06-12 15:22:23 +02:00
Atgeirr Flø Rasmussen
cc1038bcdc Merged. 2012-06-12 11:17:02 +02:00
Atgeirr Flø Rasmussen
88c7b84f4e Removed unused code. 2012-06-12 11:16:43 +02:00
Atgeirr Flø Rasmussen
14f560a295 Major simplification of IncompTpfa interface.
Most significant changes:
     - Single solve() call used for all cases (with or without gravity,
       with or without rock compressibility). This is intentionally
       similar to CompressibleTpfa::solve().
     - Constructor take a property object and computation of necessary total
       mobilities etc. moved inside class.
     - Optional constructor args for rock compressibility, gravity, wells,
       boundary conditions (null pointer accepted) and source terms (empty
       vector accepted).
     - Nonlinear iterations for the compressible rock case now handled inside
       IncompTpfa. This part intentionally made similar to CompressibleTpfa.
2012-06-12 10:27:48 +02:00
Atgeirr Flø Rasmussen
59db0f7ca9 Fix comment. 2012-06-12 10:14:26 +02:00
Bård Skaflestad
3864afe8e2 Constructor: Move common failure mode to end of if-else chain.
While here, add a failure mode pertaining to solvers that are
supported by the system but disabled at configure time.
2012-06-11 17:54:23 +02:00
Atgeirr Flø Rasmussen
024bbacce9 More minor code cleanup. 2012-06-11 14:52:18 +02:00
Kjetil Olsen Lye
c42b24612b Removed a debug print statement in the WellsGroup-code. 2012-06-11 13:16:39 +02:00
Atgeirr Flø Rasmussen
5ca2dc99e8 Whitespace (and other minor) cleanup. 2012-06-11 10:59:23 +02:00
Atgeirr Flø Rasmussen
cc7250628e Improved documentation. 2012-06-09 18:11:02 +02:00
Atgeirr Flø Rasmussen
61995b97be Changed interface of solve() and solveGravity() to accept full saturation (both phases) input. 2012-06-09 14:56:29 +02:00