OilfieldToolsNet/opm-simulators
4
0
Fork 0
mirror of https://github.com/OPM/opm-simulators.git synced 2025-01-04 13:36:57 -06:00
Code Issues Packages Projects Releases Wiki Activity
7,838 Commits 24 Branches 102 Tags 85 MiB
4f414b78ed
Commit Graph

5436 Commits

Author SHA1 Message Date
Markus Blatt
9adc4d5d3c Communicate the ebos solution at the beginning of the run method. 
Currently, the ReservoirState passed to the method and converted
to the initial solution of the Ebos simulator might have wrong
values in the ghost layer (this is the case for SPE9, Norne, Model 2).
This commit uses the syncOverlap method to update these values once they
are converted to the Ebos solution. The  ReservoirState remains untouched.
This is enough to have consistent values throughout the simulation and only
introduces one additional communication step.
 2017-10-05 14:33:48 +02:00
Arne Morten Kvarving
35fbe03ca7 remove unused variables 
quells warnings
 2017-10-05 12:02:10 +02:00
Arne Morten Kvarving
167147acc4 use std::remove_const instead of Dune::remove_const 2017-10-05 12:02:10 +02:00
Andreas Lauser
d95b622c75 mark initHydroCarbonState() as inline 
this allows it to be used in multiple compile units without the linker
running amok.
 2017-10-04 19:24:20 +02:00
Tor Harald Sandve
ebc2f46967 Use pore volume weighted averaged hydrocarbon state in rateConverted. 
- pressure, rs and rv is averaged using hydrocarbon pore volume weights.
- pvtRegions is used as input in the conversion factor calculations.
- the pvt cell of the first well cell is used as the pvt index.
(Completing a well in two different PVT regions sounds like a very bad
idea anyway)
- FIP region support is added to the rate converter also for the ebos
interface.
 2017-10-03 10:25:56 +02:00
Kai Bao
28a7167d61 avoiding the oscillation treatment applied to well solution 
it is a design to avoid some performance degeneration for parallel
running.
 2017-09-29 17:15:39 +02:00
Atgeirr Flø Rasmussen
f7529cf33e Merge pull request #1269 from GitPaean/fixing_well_efficiency 
correcting the way to use efficiency factor in assembleWelEq
 2017-09-25 10:26:55 +02:00
Atgeirr Flø Rasmussen
83ca6d41e3 Merge pull request #1263 from totto82/gasoil 
Make 2p gas oil compile and run
 2017-09-21 14:03:33 +02:00
Tor Harald Sandve
5839962e31 Some trivial cleaning 2017-09-21 12:16:46 +02:00
Atgeirr Flø Rasmussen
c1024ce2d1 Merge pull request #1268 from blattms/log-wells-debug-messages-only-on-master 
Log debug messages about wells only on master.
 2017-09-21 10:33:04 +02:00
Tor Harald Sandve
992ab84435 Remove support and tests for pseudo 2p model in flow ebos 2017-09-20 08:11:44 +02:00
Tor Harald Sandve
b452d16f46 Fix parallell run 2017-09-19 11:16:34 +02:00
Tor Harald Sandve
69c608829f Include RESV in the scaling factor 
- solvent + RESV is not correct. Make the simulator throw until this is
sorted out.

- remove unused parameter
 2017-09-18 11:28:13 +02:00
Tor Harald Sandve
352dccd5e9 Make 2p gas oil compile and runs 
-- use mapping from canonicalToActiveCompIdx from Ebos
-- add guards againts non-existing components
 2017-09-18 11:28:13 +02:00
Alf Birger Rustad
7b1e034a90 Merge pull request #1270 from atgeirr/fix-output-timestep 
Fix report step number associated with substeps.
 2017-09-17 20:25:33 +02:00
Atgeirr Flø Rasmussen
60fe6b2687 Fix report step number associated with substeps. 
It appears summary files by convention expect all substep data points to
be chunked together with the data point at the end of the report step.
 2017-09-15 12:04:30 +02:00
Kai Bao
fa03db07f8 correcting the way to use efficiency factor in assembleWelEq 2017-09-11 13:01:55 +02:00
Markus Blatt
a1f960b467 Reallow logging fatal errors for well convergence on all ranks 2017-09-07 14:45:00 +00:00
Markus Blatt
5d1eff5107 Log debug messages about wells only on master. 
Previously all ranks logged the message and did clutter the
output files quite a bit.
 2017-09-07 14:17:56 +00:00
Kai Bao
cd4d17bfa7 removing a few unused nw variable in StandardWell_impl. 2017-09-07 15:04:09 +02:00
Atgeirr Flø Rasmussen
77f3bdaeda Merge pull request #1257 from totto82/add_invert4x4 
Add invert4x4 specialization for invertMatrix()
 2017-09-04 09:08:32 +02:00
Tor Harald Sandve
210f1edf25 Add test for invert 4x4 matrix specialization 2017-08-29 11:01:20 +02:00
Kai Bao
b4538af164 not throwing when encountering multisegment wells. 2017-08-29 10:01:31 +02:00
Kai Bao
9accb56c86 adding a test for well model. 
It is just test for StandardWell.
 2017-08-25 14:09:26 +02:00
Kai Bao
355be6c26c collecting the NaN and too large well residuals 
make sure all the processes will throw if there is any of the processes
found abnormal residual values.
 2017-08-25 14:09:26 +02:00
Kai Bao
8abe48a693 making destructor of WellInterface virtual 
to avoid memory leaking.
 2017-08-25 14:09:26 +02:00
Kai Bao
a60a969257 fixing one memory-leaking for flow_ebos running 2p case. 2017-08-25 14:09:26 +02:00
Kai Bao
96340a23ff computePerfRate and crossFlowAllowed protected in StandardWell 2017-08-25 14:09:26 +02:00
Kai Bao
bc78553686 renaming well_solutions_ and well_variables 
to give slightly easier understanding.
 2017-08-25 14:09:26 +02:00
Kai Bao
25869026e5 renaming a few functions 
to reflect the functions better. No functional change.
 2017-08-25 14:09:26 +02:00
Kai Bao
9a4a9a2bcc using well name and allow_cf form well_ecl. 2017-08-25 14:09:26 +02:00
Kai Bao
a908bd7cf1 makding createWellContainer a static function. 2017-08-25 14:09:26 +02:00
Kai Bao
f9b7094075 fixing of some comments 
no functional change.
 2017-08-25 14:09:26 +02:00
Kai Bao
52af70ad0e adding debugging output for solveWellEq 
to tell if the solveWellEq is successful.
 2017-08-25 14:09:26 +02:00
Kai Bao
a29be796e7 adding comments about function calculateBhpFromThp. 2017-08-25 14:09:26 +02:00
Kai Bao
277d26df8a cleaning up well residual related in BlackoilModelEbos 
TODO: how to output the information for debugging well iteration
process.
 2017-08-25 14:09:26 +02:00
Kai Bao
7a9fc2132e more cleaning up of StandardWellsDense. 
not functional change.
 2017-08-25 14:09:26 +02:00
Kai Bao
68edfd7235 removing several unused variables. 2017-08-25 14:09:26 +02:00
Kai Bao
fe3d2f91e0 adding functions to calcuate between thp and bhp 
to reduce some code duplication in StandardWell
 2017-08-25 14:09:26 +02:00
Kai Bao
8a12ec677f more cleaning up 
not funtional change.
 2017-08-25 14:09:26 +02:00
Kai Bao
66b5226039 removing some unused variables 
to reduce warnings.
 2017-08-25 14:09:26 +02:00
Kai Bao
f1c0e84878 cleaning up for StandardWellsDense. 2017-08-25 14:09:26 +02:00
Kai Bao
49df0c12f6 cleaing up and fixing the error from rebasing. 2017-08-25 14:09:26 +02:00
Kai Bao
af6155d15a updating the well group status before updating targets. 
This recovers the running with group control.
 2017-08-25 14:09:26 +02:00
Kai Bao
31ce880ba7 fixing the prallel running. 
It needs WellSwitchingLogger for all the processes even there are not
wells in some of the processes.
 2017-08-25 14:09:26 +02:00
Kai Bao
5cb0a5109e adding setWellSolutions to StandardWellsDense. 
the function will calculate the well_solutions_ based on well_state.
It will be used when we recover the well_state from a failed iteration,
then we should also update well_solutions_ for consistence.
 2017-08-25 14:09:26 +02:00
Kai Bao
5af15fa63f removing well_soltutions_ from WellStateFullyImplicitBlackoilDense 
adding function setWellSolutions() to StandardWell.

The class WellStateFullyImplicitBlackoilDense is ready to be removed
now, while the only thing can go wrong compred with the original version
is the group control, which is not tested yet.
 2017-08-25 14:09:26 +02:00
Kai Bao
8441eb77bd not using wellSolutions() from WellState 
while not sure whether we can remove it totally because of the comments
related to group control.
 2017-08-25 14:09:26 +02:00
Kai Bao
6dcb0dfba1 fixing the vfp running with flow_ebos. 2017-08-25 14:09:26 +02:00
Kai Bao
78dd9d1d16 more cleaning up of the interface of WellInterface and StandardWell 2017-08-25 14:09:26 +02:00
Kai Bao
1550fb7600 WIP in cleaning up the interfaces of WellInterface and StandardWell 
commiting now to save some changes.
 2017-08-25 14:09:26 +02:00
Kai Bao
d4f26ad47a recovering the running of flow_ebos for 2p + dummy phase. 2017-08-25 14:09:26 +02:00
Kai Bao
c43505d007 cleaning up some interface in WellInterface. 2017-08-25 14:09:26 +02:00
Kai Bao
6bbbe5061d adding the copyright information. 2017-08-25 14:09:26 +02:00
Kai Bao
3e26a8b467 using different size of block size of well and reservoir 2017-08-25 14:09:26 +02:00
Kai Bao
894529be57 small cleaning up. 2017-08-25 14:09:26 +02:00
Kai Bao
f19dd03387 using Base to represent WellInterface<TypeTag> 
for better readability.
 2017-08-25 14:09:26 +02:00
Kai Bao
bd84e3c9f3 making a trival way to reduce the covergence of the wells. 
to be improved later.
 2017-08-25 14:09:26 +02:00
Kai Bao
4f716a633d using legacyDepth_ for the perfoation depth 
for StandardWell. It turns out that it can be different with the
grid.getCellDepth() from the parser.
 2017-08-25 14:09:26 +02:00
Kai Bao
6e0da756dc fixing the running of flow_ebos_2p. 
by not adding the dummy phase.
 2017-08-25 14:09:26 +02:00
Kai Bao
c1ee941195 adding shear calculation to the polymer simulation. 2017-08-25 14:09:26 +02:00
Kai Bao
d4fa8c06f1 adding computeRepRadiusPerfLength() to WellInterface. 2017-08-25 14:09:26 +02:00
Kai Bao
d1727d0183 correcting the injectivity with polymer injection. 2017-08-25 14:09:26 +02:00
Kai Bao
d470edfb0b correct an assertion error in getWellConvergence in StandardWell 
and adding comments why it is the case for polymer case.
 2017-08-25 14:09:26 +02:00
Kai Bao
5ed9f4d497 incorporting polymer except the parts related to PLYSHLOG 2017-08-25 14:09:26 +02:00
Kai Bao
b3428a8bf9 incorporating the solvent related to StandardWell 2017-08-25 14:09:26 +02:00
Kai Bao
72ca91d59b more cleaning up for StandardWellsDense and StandardWell 2017-08-25 14:09:26 +02:00
Kai Bao
0acd0ef387 small adjustment of member functions of WellInterface 2017-08-25 14:09:26 +02:00
Kai Bao
af254a8f4d removing some of the using of Wells in StandardWellsDense 2017-08-25 14:09:26 +02:00
Kai Bao
8ddd197dcf cleaning up StandardWellsDense 
removing more unused stuff.
 2017-08-25 14:09:26 +02:00
Kai Bao
63c418c02f adding fucntion updateListEconLimited() to WellInterface 2017-08-25 14:09:26 +02:00
Kai Bao
5986295975 adding checkRatioEconLimits to WellInterface 2017-08-25 14:09:26 +02:00
Kai Bao
1a4bd6ffb2 adding checkMaxWaterCutLimit and checkRateEconLimits to WellInterface 2017-08-25 14:09:26 +02:00
Kai Bao
369ccfef52 handling well_efficiency_factor_ in WellInterface. 2017-08-25 14:09:26 +02:00
Kai Bao
358d4c2a00 cleaning up more things from StandardWellsDense 2017-08-25 14:09:26 +02:00
Kai Bao
7e9eee4ee4 moving wsolvent and wpolymer to WellInterface 
to do this, adding well_ecl_ and current_step_ to WelInterface.
 2017-08-25 14:09:26 +02:00
Kai Bao
a02a0d8599 removing updateWellStateWithTarget from StandardWellsDense 
and also fixing the assertion error related to disabling the residual()
    function of StandardWellsDense.
 2017-08-25 14:09:26 +02:00
Kai Bao
8130b32791 cleaning up some functions from StandardWellsDense. 2017-08-25 14:09:26 +02:00
Kai Bao
e6d2b8550b adding function computeWellPotentials to StandardWell 
for some similar reasons, this function stays in StandardWell for now.
Eventually, it should go to WellInterface with some refactoring work.
 2017-08-25 14:09:26 +02:00
Kai Bao
1d34c9dc6e adding computeWellPotentialWithTHP() to StandardWell 
it is not clear at the moment how all the well potentials related will
work with MS wells. For the moment, keep the well poentials related only
in StandardWell.

By theory, they should be very similar, while some dependence on certain
member variables makes some small refactoring work necessary.
 2017-08-25 14:09:26 +02:00
Kai Bao
c3cc4021fa adding computeWellRatesWithBhp() to StandardWell 2017-08-25 14:09:26 +02:00
Kai Bao
dfc532a713 cleaning up some more stuff unused in StandardWellsDense 2017-08-25 14:09:26 +02:00
Kai Bao
e695a3c418 cleaning up some unused stuff from StandardWellsDense 2017-08-25 14:09:26 +02:00
Kai Bao
f1677015fe using getWellConvergence in BlackoilModelEbos 
Tested with SPE1.

TODO: with the current way, we are not outputting any well residual
information. We need to address what kind of residual information we
want to output with the new well model.
 2017-08-25 14:09:26 +02:00
Kai Bao
ab67635134 adding applySolutionWellState to apply solution from reservoir 
to update well state.

With this way, the BlackoilModelEbos does not need to know the data type
assocated with different well type.

It is not well tested yet.
 2017-08-25 14:09:26 +02:00
Kai Bao
07f563a1e1 implementing two apply() function in StandardWell_impl 
The two functions will be essentially the same even for different types
of wells. Maybe later we should try to put them in WellInterface.
 2017-08-25 14:09:26 +02:00
Kai Bao
f1123acdf0 also switching B and C in StandardWell_impl 2017-08-25 14:09:26 +02:00
Kai Bao
e7a2e52763 making matrix C and B same with the reference paper. 
Really no good point to make C and B different from the paper
formulation except introducing more confusion.
 2017-08-25 14:09:26 +02:00
Kai Bao
51226af445 refactoring solveJacobianSystem() not to handle xw. 
which is one step to avoid to access the type of xw, which is related to
the implementation of the well model.
 2017-08-25 14:09:26 +02:00
Kai Bao
b080874b89 adding the offset of perf for each well 
when accessing perforation rate and perforation pressure from the
well_state.
 2017-08-25 14:09:26 +02:00
Kai Bao
168205a993 checking magnitude of the residual for convergence 
in StandardWell_impl.
 2017-08-25 14:09:26 +02:00
Kai Bao
ddb21e1f2c correcting the indexing of xvar_well_old in updateWellState 
in StandardWell_impl.
 2017-08-25 14:09:26 +02:00
Kai Bao
1c2353fab8 making the ref_depth_ to be double in WellInterface 
which is a mistake.
 2017-08-25 14:09:26 +02:00
Kai Bao
4624ecc63d correcting the dFLimit and dBHPLimit in StandardWell_impl 2017-08-25 14:09:26 +02:00
Kai Bao
eca28a8ade adding a function outputWellState for StandardWellsDense 
to output the well state for debugging purpose.
 2017-08-25 14:09:26 +02:00
Kai Bao
3ceea76616 adding function computeAccumWell and computeWellConnectionPressures 
to StandardWell and removing a few not needed function from StandardWellsDense
 2017-08-25 14:09:26 +02:00
Kai Bao
033fe70620 making init() function for WellInterface virtual. 2017-08-25 14:09:26 +02:00
Kai Bao
4e4e383107 slightly changing createWellContainer() in StandardWellsDense 
no functional change.
 2017-08-25 14:09:26 +02:00
Kai Bao
9c215faade removing function allow_cross_flow() from StandardWellsDense 2017-08-25 14:09:26 +02:00
Kai Bao
229244142f adding updateGroupControls() to StandardWellsDense 
which separates the group control related operations. The group control
has to be handled in the level of all wells, which makes more functions
of the well class to be visible outside.
 2017-08-25 14:09:26 +02:00
Kai Bao
d535157b1a cleaning up a few fucntions in StandardWellsDense 
to remove the implementation implemented in StandardWell already.
 2017-08-25 14:09:26 +02:00
Kai Bao
fb5fa836c0 removing some repeated contents in getWellConvergence in StandardWellsDense 
which results from the rebasing process.
 2017-08-25 14:09:26 +02:00
Kai Bao
48dee6bd7a renaming function allCrossFlow() in StandardWell 
to avoid confusion. and the detail of the function needs to be
justified.
 2017-08-25 14:09:26 +02:00
Kai Bao
e5b5e250fe incoporating more content from PR 1220 
while the parts related to polymer are not incoporated fully yet, since
it has been considered in the new well model refactoring.
 2017-08-25 14:09:26 +02:00
Kai Bao
e3399ca203 fixing some compilation error after rebase. 
while a lot of new stuff have not entered, since many of the essential
parts are in different files now. Rebasing will not incoporate the new
stuff automatically.
 2017-08-25 14:09:26 +02:00
Kai Bao
07d24b9d8d solveWellEq in StandardWellsDense calls 
solveWellEq from each individual well.
 2017-08-25 14:09:26 +02:00
Kai Bao
9dace225de adding wellEqIteration() to StandardWell 
the involvement of the group control in updateWellControls() makes the
solution of well equations for each well individually more troublesome.
As a result, we will still makes the solveWellEq in all the wells level.
 2017-08-25 14:09:26 +02:00
Kai Bao
d99fe876dd adding getWellConvergence for StandardWell 2017-08-25 14:09:26 +02:00
Kai Bao
e01e8c352a adding function computeWellConnectionDensitesPressures to StandardWell 2017-08-25 14:09:26 +02:00
Kai Bao
0f997a537a adding computeConnectionPressureDelta to StandardWell 
it is also copied from WellDensitySegmented while only handle one
Standard Well.
 2017-08-25 14:09:26 +02:00
Kai Bao
9514e44d13 adding function computeConnectionDensities to StandardWell 
which is copied from WellDensitySegmented, while avoid using of the
Wells struct.

TODO: find a better place to put these long functions.
 2017-08-25 14:09:26 +02:00
Kai Bao
20c36d19c1 adding computePropertiesForWellConnectionPressures to StandardWell 2017-08-25 14:09:26 +02:00
Kai Bao
d3378ab403 adding function computeAverageFormationFactor to StandardWellsDense 
which is seperated from getWellConvergence for better flexiblity later.
 2017-08-25 14:09:26 +02:00
Kai Bao
9c65684bf0 adding updateWellControl to StandardWell 
TODO: check whehter it should go to WellInterface.
 2017-08-25 14:09:26 +02:00
Kai Bao
f293e81336 adding function updateWellStateWithTarget to StandardWell 
without dealing with wsolvent function. It can be just a member variable
since we are handling well one by one individually.
 2017-08-25 14:09:26 +02:00
Kai Bao
1d9d70ee02 adding the updateWellState to StandardWell 
this function is very long and need to debug very carefully and it
should be split for better readability for sure.
 2017-08-25 14:09:26 +02:00
Kai Bao
1174d2de54 adding assembleWellEq to StandardWell 
F0_ is not initialized yet.
 2017-08-25 14:09:26 +02:00
Kai Bao
1942853337 adding function computePerfRate to StandardWell 2017-08-25 14:09:26 +02:00
Kai Bao
7223163155 handing the numComponents in WellInterface 2017-08-25 14:09:26 +02:00
Kai Bao
266442b0bd adding extendEval() to StandardWell 
For this type of functions that related to Evaluation should be
implemented within individual well model.
 2017-08-25 14:09:26 +02:00
Kai Bao
ff2ada66bc adding the three swapping functions to WellInterface 
They should only be used to change the order related to the reservoir
variables, so they should be same for all the well models and should be
put in the WelInterface.
 2017-08-25 14:09:26 +02:00
Kai Bao
1a4ceeec66 makding the StandardWell and WellInterface templated 
with the template parameter TypeTag.
 2017-08-25 14:09:26 +02:00
Kai Bao
182bf315f3 implementing getQs() and getBhp() within StandardWell. 
It does not compile. Now it is pretty clear that anything related to
Evalulation should go to each individual well model (StandardWell or MS
well ) and not stay with the Wells.
 2017-08-25 14:09:26 +02:00
Kai Bao
2d02503091 more or less getting the old implementation in 
and compile now.
 2017-08-25 14:09:26 +02:00
Kai Bao
0cf6699591 adding StandardWell class 
copied from the old implementation, which is the starting point for the
new refactoring
 2017-08-25 14:09:26 +02:00
Kai Bao
910fe0318c adding the WellInteface 
will be the base class for different well models.
 2017-08-25 14:09:26 +02:00
Robert Kloefkorn
07e0d71906 [feature][flow] Add a common executable for all flow variants, i.e. 
flow_ebos, flow_ebos_polymer, flow_ebos_solvent, flow_ebos_2p.
 2017-08-23 16:21:15 +02:00
Tor Harald Sandve
6716ca63c9 Force solvent saturation between [0,1] 2017-08-23 09:50:40 +02:00
Tor Harald Sandve
55fc987af8 Add 4x4 invertMatrix specialization in FMatrix 
The specialization is added in the ISTLSolver, not in fmatrix.h in dune-
common since 1) we need it now 2) the special treatment of singular and
near singular matrices may be specifiy to the solvent model.
 2017-08-23 09:50:19 +02:00
Atgeirr Flø Rasmussen
58eea94460 Merge pull request #1247 from totto82/removeState-PR 
Remove reservoirState from BlackoilModelEbos
 2017-08-22 20:47:16 +02:00
Tor Harald Sandve
d643476ea5 Fix fallout if no group controll (NONE) is specified for a group 2017-08-18 08:56:26 +02:00
Tor Harald Sandve
6146190844 Fixes comments from PR 
Don't sum ghost cells in the RateConverter
Some cleaning and comments.
 2017-08-18 08:46:44 +02:00
Atgeirr Flø Rasmussen
8998207d7e Merge pull request #1253 from blattms/print-bubble-dew-point-problems-only-on-0 
Output bubble/dew point computation problems only on rank 0.
 2017-08-17 22:25:53 +02:00
Tor Harald Sandve
6bca2ea69c Fix rebase 2017-08-17 11:34:33 +02:00
Tor Harald Sandve
2bf8d48272 Remove redundant local state in ParallelDebugOutput 2017-08-17 11:13:00 +02:00
Tor Harald Sandve
593546da4b Fix 2p case in relativeChange(...) in BlackoilModelEbos 2017-08-17 11:13:00 +02:00
Tor Harald Sandve
ce84a59b29 Remove reservoirState from BlackoilModelEbos 
1) Use the solution variable directly in RelativeChange(...)
2) Add a method in the RateConverter that takes the simulator instead of the state.
3) Pass the reservoir pressure directly to the well initialization.
4) Move convertInput(...) to SimulatorFullyImplicitBlackoilEbos.hpp.
This code is only used to convert the initial reservoir state.
5) Modify  updateState(...). The solution variable is updated directly and adaptPrimaryVariable(...)
from ewoms is used to switch primary variables. An epsilon is passed to adaptPrimaryVarible(...) after a switch
of primary variables to make it harder to immediately switch back.

The following code used by flow_ebos still uses the reservoirState
1) the initialization
2) restart
3) output of the initial state
4) the step methods in AdaptiveTimeStepping and NonlinearSolver.
The reservoirState is not used by this methods, so after the initial step, an empty reservoirState is passed around in the code.
 2017-08-17 11:13:00 +02:00
Atgeirr Flø Rasmussen
e3ceecdfa4 Silence unused variable warnings. 2017-08-15 11:17:30 +02:00
Markus Blatt
7b3b99f692 Output bubble/dew point computation problems only on rank 0. 
We do this by switching to output the global index of the cells.
In a first step the problematic cell indices are gather on process 0.
Then they are logged there.

This should prevent spurious ouput at the end of PRT and DEBUG files after the
simulation time is printed. This happened previously for some parallel
runs of model 2. Unfortunately, it seems these problems do not appear any
more for the current master. At least I could not reproduce them.
 2017-08-14 21:34:54 +02:00
Atgeirr Flø Rasmussen
c6e729b1bf Merge pull request #1252 from atgeirr/debug-reordering-solver 
Fixing bugs and improving the reordering solver
 2017-08-10 14:09:58 +02:00
Atgeirr Flø Rasmussen
67823c5893 Disable debugging output of detailed cell data. 2017-08-10 13:09:22 +02:00
Atgeirr Flø Rasmussen
784bcf6892 Experiment with relaxing single cell iterations. 2017-08-10 12:31:04 +02:00
Atgeirr Flø Rasmussen
9cf6832140 Ignore limits to rs and rv changes. 
As implemented with a relative limit, even with 1e9 default limit it
would still be impossible to get away from a zero value. It is
possible that the limits may return later, implemented in a less
buggy way, however for now they do not seem necessary.
 2017-08-10 11:25:47 +02:00
Kai Bao
c59aa9127e making rate_converter to be reference to the one in Simulator 
keeping the const property in the Well Model.
 2017-08-10 11:20:09 +02:00
Kai Bao
cf902e1a8b Simulator Blackoil and StandardWellsDense uses same rate_converter 
fixing the running of group control.
 2017-08-10 10:25:39 +02:00
Atgeirr Flø Rasmussen
0a440d98ce Merge pull request #1238 from totto82/removeConvertResults2 
Ask ebos to formulate the equation by surface volumes directly
 2017-08-10 10:01:32 +02:00
Atgeirr Flø Rasmussen
1e0facec4a Fix updateState() saturation update. 2017-08-09 15:47:39 +02:00
Atgeirr Flø Rasmussen
608a674858 Make dh_sat behave like in coupled transport solver. 2017-08-07 16:17:57 +02:00
Kai Bao
338828fdce fixing the running of the vfp related for flow_ebos 
the output of the THP is still not yet correct.
 2017-08-07 11:39:11 +02:00
Atgeirr Flø Rasmussen
c39341006d Bugfix: follow opm-material convention for capillary pressure 2017-08-04 11:39:51 +02:00
Atgeirr Flø Rasmussen
e9e4416428 Make computeCellState() a const method. 2017-08-04 11:39:09 +02:00
Tor Harald Sandve
6b55b8316b Add interface for passing cell pressures directly in wellState.init(...) 2017-08-03 10:31:10 +02:00
Atgeirr Flø Rasmussen
12bd67e248 Create oil-in-place data if overall efficiency is requested by output. 2017-08-01 16:40:34 +02:00
Atgeirr Flø Rasmussen
babf06eade Merge pull request #1243 from blattms/write-initial-oip 
Write the initial OIP values if requested.
 2017-08-01 16:15:46 +02:00
Kai Bao
ab1b57b994 fixing the if condition for 2p + dummy phase 
from if (numComp < numEq) to if (numComp < numWellEq)
 2017-07-31 12:43:50 +02:00
Markus Blatt
900fec427d Cleaned up bogus documentation and whitespace 2017-07-20 12:37:01 +02:00
Markus Blatt
c06e5b7cf8 Removed boolean parameter indicating initial write to writeTimeStep. 
Instead we use the timer to determine whether this is the initial write.
 2017-07-20 12:12:41 +02:00
Markus Blatt
b89aa1fa4a Added initialStep to SimulatorTimerInterface 2017-07-20 12:11:11 +02:00
Markus Blatt
1939453adb Write the initial OIP values if requested. 
This is when writing the first time step as is this is
the first step when OIP is available.
 2017-07-19 22:06:08 +02:00
Markus Blatt
542f181f7e Narrow down the possible Matrix types for ParallelOverlappingILU0 
It now has to be a BCRSMatrix, but the block type is flexible and
needs to this way. flow_legacy uses MatrixBlock, and flow_ebos uses
FieldMatrix.
 2017-07-03 13:50:21 +02:00
Markus Blatt
1bb0968283 Work around unstable matrix inversion in DUNE 2.[34] 
The versions are missing the specialized code for inverting
a 3x3 matrix that makes the algorithms quite a bit more stable.
With this patch we fall back to using our own MatrixBlock that does
not suffer from this deficiency.
 2017-07-03 10:20:23 +02:00
Tor Harald Sandve
082e00d4ec Ask ebos to formulate the equation by surface volumes directly 2017-06-29 13:58:20 +02:00
Robert Kloefkorn
ce7f3f46a1 [feature] Added two-phase executable for numEq = 2. 2017-06-29 12:56:37 +02:00
Atgeirr Flø Rasmussen
a980993289 Make reordering solver work with iterated implicit. 
Also tighten tolerances. They were too slack, giving significant
differences from non-reordering implementation towards the end of
SPE1CASE2 for example.
 2017-06-28 07:47:17 +02:00
Atgeirr Flø Rasmussen
9b2d696b86 Tweak tolerance. 
Note that a more proper dimensionless residual check is still a good idea.
 2017-06-28 07:47:17 +02:00
Atgeirr Flø Rasmussen
c40ef4d9d0 Modifications to catch up with master branch. 2017-06-28 07:47:17 +02:00
Atgeirr Flø Rasmussen
4f9a9359ee Refine convergence check, retain max change info. 2017-06-28 07:47:17 +02:00
Atgeirr Flø Rasmussen
6167fff62a WIP: change what is logged, keep track of max change. 2017-06-28 07:47:17 +02:00
Atgeirr Flø Rasmussen
ab735b33e1 WIP: add sequential model for debugging. 2017-06-28 07:47:17 +02:00
Atgeirr Flø Rasmussen
0f8cd2c212 Bugfix: use correct sign for z gradient. 2017-06-28 07:47:17 +02:00
Atgeirr Flø Rasmussen
e653067951 Adapt new interface with timers. 2017-06-28 07:47:16 +02:00
Atgeirr Flø Rasmussen
b5b8fa14de Bugfix: use correct pv multiplier for initial and current state. 2017-06-28 07:47:16 +02:00
Atgeirr Flø Rasmussen
fb6dd3adf8 Add well flux terms. 2017-06-28 07:47:16 +02:00
Atgeirr Flø Rasmussen
2c20bb6cde Bugfix: take absolute value of residuals for comparison. 
Also tighten hardcoded tolerance for testing, and update a comment.
 2017-06-28 07:47:16 +02:00
Atgeirr Flø Rasmussen
87477f7a44 Bugfix: update output reservoir state. 2017-06-28 07:47:16 +02:00
Atgeirr Flø Rasmussen
79fed93b76 Fix saturation bug. 2017-06-28 07:47:16 +02:00
Atgeirr Flø Rasmussen
f12c781f3e Fix bugs. 2017-06-28 07:47:16 +02:00
Atgeirr Flø Rasmussen
e83b8cd0ac Finished updateState(). 2017-06-28 07:47:16 +02:00
Atgeirr Flø Rasmussen
0a3c65707d More work in progress... 2017-06-28 07:47:16 +02:00
Atgeirr Flø Rasmussen
56853a0272 Avoid derivative pollution. 2017-06-28 07:47:16 +02:00
Atgeirr Flø Rasmussen
5b21cdf54f Still working on reordering solver. 2017-06-28 07:47:16 +02:00
Atgeirr Flø Rasmussen
fae4922482 More work in progress for reordering solver. 2017-06-28 07:47:16 +02:00
Atgeirr Flø Rasmussen
1a8e28bd7e More work in progress on reordering solver. 2017-06-28 07:47:15 +02:00
Atgeirr Flø Rasmussen
ad6b5ec812 Work in progress (still) on reordering solver. 2017-06-28 07:47:15 +02:00
Atgeirr Flø Rasmussen
ad3e8b591b Add pvtRegions() accessor. 2017-06-28 07:47:15 +02:00
Atgeirr Flø Rasmussen
edeeb3e0ad Work in progress on reordering solver. 2017-06-28 07:47:15 +02:00
Atgeirr Flø Rasmussen
5e34ba33a2 Add access to low-level functionality. 2017-06-28 07:47:15 +02:00
Atgeirr Flø Rasmussen
803b40b82f Work in progress on BlackoilReorderingTransportModel. 2017-06-28 07:47:15 +02:00
Atgeirr Flø Rasmussen
293a7abfa2 Add skeleton of reordering transport solver. 2017-06-28 07:47:15 +02:00
Atgeirr Flø Rasmussen
0d6bf85f96 Merge pull request #1189 from blattms/fix-amg-support 
Fix the PR that said it activated AMG.
 2017-06-27 22:40:14 +02:00
Atgeirr Flø Rasmussen
fa4c4ccee6 Remove 'auto' from one more parameter list. 2017-06-27 20:06:44 +02:00
Robert Kloefkorn
936d035dc2 [bugfix][StandardWellsDense] remove auto from method parameter list. 2017-06-27 16:51:11 +02:00
Markus Blatt
8759c3a89a Set defines in *.cpp files. 
That way we can keep the old order of includes which seems to be needed for compilation.
 2017-06-27 10:00:31 +00:00
Markus Blatt
e8d89bcf48 Fix lookup of std::cerr by including iostream 2017-06-27 10:00:31 +00:00
Markus Blatt
f913baa66e Make use of template argument deduction for createAMGPreconditionerPointer 2017-06-27 10:00:31 +00:00
Markus Blatt
59ca0b4424 Fix the PR that said it activated AMG. 
Actually, it did not as it did set the define eith wrong
or the wrong locations. This commit fixes this and finally
makes AMG available.
 2017-06-27 10:00:31 +00:00
Atgeirr Flø Rasmussen
bf0937fae1 Merge pull request #1220 from totto82/impl_polymer_simpleWellModel 
Add flow_ebos_polymer and flow_ebos_solvent
 2017-06-27 10:51:42 +02:00
Atgeirr Flø Rasmussen
730ab5526c Merge pull request #1233 from nairr/term_output_mod 
Multiple problem logging for linear solver failure
 2017-06-26 13:58:21 +02:00
Rohith Nair
7500d3eb0c edit 2017-06-26 12:46:09 +02:00
Rohith Nair
84ca3cd9b9 Removes multiple problem logging for linear solver convergence failure 2017-06-26 12:21:44 +02:00
Tor Harald Sandve
1c05402209 Fix 2p case after rebase 2017-06-26 08:40:30 +02:00
Tor Harald Sandve
1bc2550541 Fix polymer in well model for producers. 2017-06-26 08:03:54 +02:00
Tor Harald Sandve
e9a1aa2a83 Clean up after rebase 2017-06-26 08:03:54 +02:00
Tor Harald Sandve
8088347c96 Move adjustment of water mobility caused by polymer to getMobility() 2017-06-26 08:03:54 +02:00
Tor Harald Sandve
17ada607eb Assume polymer and water is fully mixed in the well 2017-06-26 08:03:54 +02:00
Tor Harald Sandve
0068c175a7 Add polymer option to flow_ebos 
No extra equation is added for polymer in the well equation.

Seperate executables are added for polymer: flow_ebos_polymer
and solvent: flow_ebos_solvent

Tested and verified on the test cases in polymer_test_suite

This PR should not effect the performance and results of the blackoil
simulator
 2017-06-26 08:03:54 +02:00
Atgeirr Flø Rasmussen
2ceca48f04 Merge pull request #1206 from GitPaean/switching_well_primary_variables 
Not switching the order of well primary variables and well equations
 2017-06-22 19:37:40 +02:00
Robert Kloefkorn
2f13de8592 [cleanup][Ebos::getConvergence] removed unnecessary creation of vectors 
for temporary quantities.
 2017-06-22 14:37:43 +02:00
Kai Bao
e0e1fc65e2 removing ebosCompToFlowPhaseIdx from StandardWellsDense 2017-06-21 11:44:43 +02:00
Kai Bao
aaa66e0982 not switching the order of well equations. 2017-06-21 11:44:43 +02:00
Kai Bao
70e193696d removing the order switiching of the well primary variables. 
Order swtiching of the well primary variables make the code more
complicated, and harder to understand and extend.
 2017-06-21 11:44:43 +02:00
Atgeirr Flø Rasmussen
757320c57d Merge pull request #1224 from blattms/only-created-step_timings.txt-if-output 
Only create step_timing.txt file if it gets written to.
 2017-06-21 09:01:33 +02:00
Atgeirr Flø Rasmussen
f48acb8807 Merge pull request #1226 from blattms/use-output-to-skip-debug-or-all-files 
Use output to skip debug or all files
 2017-06-21 09:01:17 +02:00
Markus Blatt
a6175942fd Make lambda C++11 compliant 2017-06-20 15:49:13 +02:00
Markus Blatt
e6c2ab47b3 Equalize if statements governing step_timing.txt output 2017-06-20 15:46:04 +02:00
Markus Blatt
75561a0da7 Some cleanup concerning spaces, const, simplified logic. 2017-06-20 15:27:05 +02:00
Markus Blatt
e5b8cddfa8 Reactivate no_debug_log to indicate whether .CASE.DEBUG should be written 
This switch only has an effect if output is not equal to none.
 2017-06-20 13:36:22 +02:00
Markus Blatt
d7c2d58853 write init stuff only if output=all or output=true. 2017-06-20 13:21:26 +02:00
Markus Blatt
58948521bb Do not activate output writer for when output=log 2017-06-20 13:16:50 +02:00
Markus Blatt
1f8b747299 Removed leftover getDefault("output", ...) where bool was expected. 2017-06-20 13:11:16 +02:00
Markus Blatt
9c6e9b3715 Use option output to activate or (partly) deactivate output to files. 
Possible values are none, log, and all. The first does not do any logging
to files. The second does log to files but does not create and log to
the DEBUG file. The latter uses all possible files.
 2017-06-20 11:57:47 +02:00
Joakim Hove
eafadaa555 Merge pull request #1222 from joakim-hove/time-map-api 
Changed to TimeMap api - using std::time_t
 2017-06-20 10:29:29 +02:00
Markus Blatt
588111d135 Allow a flow_ebos run without creating a debug or prt file. 
Adds two switches no_prt_log, and no_debug_log that deactivate
writing to PRT and DEBUG file.
One can now run flow_ebos without creating any output by
passing "output=false no_prt_log=true no_debug_log=true"
on the command line.
 2017-06-20 08:33:47 +02:00
Markus Blatt
e0a7ced256 Only create step_timing.txt file if it gets written to. 
If output=false is requested we created an empty file.
Now that file will only be created if output was requested
and it will only be opened on one rank in a parallel run.
 2017-06-19 17:51:26 +02:00
Joakim Hove
66931cb030 Changed to TimeMap api - using std::time_t 2017-06-19 14:03:14 +02:00
Andreas Lauser
dc9ad10f87 flow_ebos: do not use BlackoilPropsAdFromDeck anymore 
the only thing that was used of this class was the phase usage object,
but the phase usage object can be accessed via much leaner interfaces.

The old BlackoilPropsFromDeck (without "Ad") is still required to
compute the initial condition, but the init code should be refactored
soon anyway.
 2017-06-16 15:13:47 +02:00
Tor Harald Sandve
d247b05b6b Add polymer to phase usage. 2017-06-16 13:40:29 +02:00
Atgeirr Flø Rasmussen
56cef57c8d Merge pull request #1218 from blattms/faster-ilu-old-order 
This is the faster ilu pull request but with the traversal of the columns of upper in the original ordering
 2017-06-15 14:23:17 +02:00
Atgeirr Flø Rasmussen
dd453d3e50 Merge pull request #1211 from andlaus/improve_cnv 
Improve stability by changing the convergence check
 2017-06-15 10:39:13 +02:00
Andreas Lauser
e3d0bbc144 specify the number of iterations where we use a "strict" Newton convergence criterion using a separate parameter 
that parameter is called "max_strict_iter". This increases the
flexibility of this slightly and it avoids screwing up the default
value for the "max_iter" parameter in the future. The credits for this
patch go to [at]atgeirr for proposing it.
 2017-06-14 14:22:22 +02:00
Andreas Lauser
0304183361 Newton: fail earlier 
i.e. give up after 10 instead of 15 Newton iterations. since this now
also causes the CNV convergence criterion to be ignored after 8
instead of after 13 Newton iterations, and because CNV stagnation
seems to be the cause for the vast majority of the failures, it does
not lead to worse results or more time step chopping on Norne but
causes fewer wasted iterations.
 2017-06-14 14:22:22 +02:00
Andreas Lauser
e58fed9956 ignore the CNV convergence criterion for the last few newton iterations 
the cell based residual can cause problems for cells with
almost-singular shapes and/or small pore volume.
 2017-06-14 14:22:22 +02:00
Atgeirr Flø Rasmussen
699b0678a0 Remove unused simulator program. 
This stand-alone simulator is no longer needed since
flow_polymer supports two-phase runs.
 2017-06-14 14:15:13 +02:00
Markus Blatt
c2129185ae Store columns of ParallelOverlappingILU0::upper in descending order 
This is the order used by ILU in dune-istl
 2017-06-14 10:06:33 +00:00
Atgeirr Flø Rasmussen
d284a657cf Merge pull request #1213 from nairr/terminal_output 
remove debug info from convergence failure terminal output
 2017-06-14 07:43:00 +02:00
Robert Kloefkorn
e3c898030c [cleanup] ilu_iteration --> ilu_fillin_level. 2017-06-13 15:48:01 +02:00
Robert Kloefkorn
0b90b7863b [cleanup[ use Dune::Amg::SequentialInformation instead of int. 2017-06-13 15:48:01 +02:00
Robert Kloefkorn
38300a4c9b [cleanup] avoid over aggressive memory allocation in ILU. 2017-06-13 15:48:01 +02:00
Robert Kloefkorn
1fa04096c3 [bugfix] circumvent bug in dune-istl when matrix was assembled in 
row_wise mode. Also cleanup of output.
 2017-06-13 15:48:01 +02:00
Robert Kloefkorn
e4f1bf9955 [feature] make ILU relaxation and iteration a dynamic parameter. 2017-06-13 15:48:01 +02:00
Robert Kloefkorn
a774128fb7 [feature] Make ILU use CRS for storing lower and upper triangular matrices. 
Then the backwards in memory iteration for the upper triangular can be
avoided by storing the matrix blocks in the correct order.
 2017-06-13 15:48:01 +02:00
Atgeirr Flø Rasmussen
a064f1bae2 Merge pull request #1215 from atgeirr/transport-solver-bugfixes 
Transport solver bugfixes
 2017-06-13 14:26:35 +02:00
Atgeirr Flø Rasmussen
f37a72da71 Merge pull request #1209 from dr-robertk/PR/remove-uninitialized-vars 
[cleanup] initialized Eval variables with 0.
 2017-06-13 08:56:23 +02:00
Tor Harald Sandve
655b81c8d7 Add polymer to blackoilstate 2017-06-12 15:37:57 +02:00
Atgeirr Flø Rasmussen
e0570fc980 Fix issues for iterated sequential implicit. 2017-06-12 15:36:56 +02:00
Atgeirr Flø Rasmussen
e01eca28ca Bugfix: avoid modification of flux data every iteration. 2017-06-12 15:36:48 +02:00
Atgeirr Flø Rasmussen
8a2cf4fd2d Merge pull request #1167 from GitPaean/fixing_petsc_compilation 
removing the unused parameter:: for LinearSolverPetsc
 2017-06-12 11:12:45 +02:00
Rohith Nair
2976b62d75 Add cause_of_failure for NumericalProblem 2017-06-12 10:48:07 +02:00
Rohith Nair
073e4ce839 Add cause_of_failure for LinearSolverProblem 2017-06-12 10:28:38 +02:00
Rohith Nair
18dfe1783b remove debug info from terminal output for convergence failure 2017-06-11 22:32:46 +02:00
Arne Morten Kvarving
85e65415c5 fixed: constructor has been made explicit 2017-06-09 18:45:11 +02:00
Bård Skaflestad
1e0428d821 Merge pull request #1208 from atgeirr/refactor-sequential-solver 
Refactor sequential solver
 2017-06-09 15:10:11 +02:00
Atgeirr Flø Rasmussen
462d90aeb1 Merge pull request #1207 from GitPaean/improve_WellModelMatrixAdapter 
making wellMod_ in WellModelMatrixAdapter is actually a well model
 2017-06-09 10:46:13 +02:00
Robert Kloefkorn
ee7520d896 [cleanup] initialized Eval variables with 0. 2017-06-08 15:35:40 +02:00
Atgeirr Flø Rasmussen
fa4d4fb0fb Make argument of setParameters() a const reference. 2017-06-08 11:03:27 +02:00
Atgeirr Flø Rasmussen
2f30897c70 Make proper convergence check for iterated sequentical implicit. 2017-06-08 11:03:26 +02:00
Atgeirr Flø Rasmussen
fd36a122c6 Modifications to catch up with master branch. 2017-06-08 11:03:26 +02:00
Atgeirr Flø Rasmussen
1a3c1d3058 Further templatized sequential model and simulator classes. 
Now the actual pressure and transport model classes are not specified,
but taken as template template parameters, also grid and well model
are templates for both the sequential model and the simulator class,
although at this point only StandardWells is expected to work with
the sequential model.
 2017-06-08 11:03:26 +02:00
Atgeirr Flø Rasmussen
6e66d885fb Pass 0 min_iter for pressure and transport solve. 2017-06-08 11:03:26 +02:00
Atgeirr Flø Rasmussen
5290b000ef Add setParameters(), return int from minIter(), maxIter(). 2017-06-08 11:03:26 +02:00
Atgeirr Flø Rasmussen
56597a9238 Merge pull request #1205 from atgeirr/tcpu-work 
Implement TCPU
 2017-06-08 09:08:51 +02:00
Atgeirr Flø Rasmussen
60985fdbeb Merge pull request #1168 from nairr/term_output_mod 
Logging of multiple problems/warnings
 2017-06-07 15:47:34 +02:00
Rohith Nair
c1e76d6b51 edit 2017-06-07 14:49:00 +02:00
Rohith Nair
deaf90f211 edit 2017-06-07 14:47:45 +02:00
Rohith Nair
58285bb8f8 edit 2017-06-07 14:46:04 +02:00
Rohith Nair
348cb5e5a4 Changes made as requested 2017-06-07 14:40:18 +02:00
Kai Bao
908b2bdf81 making wellMod_ in WellModelMatrixAdapter is actually a well model 
instead of the BlackoilModelEbos, which reduces some confusion and also
removes a few unnecessary wrapping functions.
 2017-06-07 14:26:00 +02:00
Tor Harald Sandve
2a66aa23a9 Merge pull request #1198 from dr-robertk/PR/fix-densewell-for-2p 
[bugfix] Fix invalid read in WellDenseStandard when used with 2P Model.
 2017-06-07 13:57:44 +02:00
Robert Kloefkorn
02b0b9d0f9 [cleanup] remove two uninitialized warnings in SaturationProposFromDeck. 2017-06-07 13:19:21 +02:00
Rohith Nair
c12665e04f -Added exception TooManyIterations 
-Combined log messages from NonLinearSolver_impl.hpp and AdaptiveTimeStepping_impl.hpp
 2017-06-07 10:37:25 +02:00
Atgeirr Flø Rasmussen
42aa343d9f Write total solver time to TCPU. 2017-06-06 21:35:05 +02:00
Atgeirr Flø Rasmussen
2d0701c1e8 Include possibility for arbitrary summary data. 
This adapts to the upstream API change in opm-data, and adds a
proof-of-concept dummy TCPU field.
 2017-06-06 11:42:51 +02:00
Kai Bao
bbb0c5a993 removing the unused parameter:: for LinearSolverPetsc 
to fix the compilation when PETsc exists.
 2017-06-06 11:00:51 +02:00
Atgeirr Flø Rasmussen
b62d84f7b8 Logging flexibility improvements. 
Added "all_messages_to_terminal" parameter (defaulting to false),
it true, all messages (including note and debug) will be sent to
the terminal.

In addition, parser messages are tagged, to make the terminal output
less likely to be overwhelmed.
 2017-06-02 15:26:23 +02:00
Atgeirr Flø Rasmussen
efc553b175 Merge pull request #1203 from atgeirr/debug-time-report 
Add DebugTimeReport utility.
 2017-06-02 14:14:28 +02:00
Atgeirr Flø Rasmussen
5f66a8ff4f Add DebugTimeReport utility. 2017-06-02 13:48:24 +02:00
Robert Kloefkorn
46f66e34b9 [bugfix] Only create asyncOutput when output is enabled globally. 2017-06-02 13:09:48 +02:00
Atgeirr Flø Rasmussen
c8e1f31f1d Fix minor warning (returning a const double). 2017-06-02 11:17:37 +02:00
Atgeirr Flø Rasmussen
37cbdbced2 Merge pull request #1199 from atgeirr/multiphase-upwind-refactor 
Multiphase upwind refactor
 2017-06-02 11:13:14 +02:00
Atgeirr Flø Rasmussen
f5795322fa Add missing include directive for std::sort(). 2017-06-02 08:52:16 +02:00
Atgeirr Flø Rasmussen
7e8ed40714 Use free function for multi-phase upwinding. 2017-06-01 14:15:31 +02:00
Atgeirr Flø Rasmussen
80c38d5a1a Add connectionMultiPhaseUpwind() free function. 2017-06-01 11:01:25 +02:00
Robert Kloefkorn
3db16ede73 [bugfix] Fix invalid read in WellDenseStandard when used with 2P Model. 2017-05-31 16:17:59 +02:00
Tor Harald Sandve
f671af6cd6 Clean-up of the solvent implementation 2017-05-30 14:33:17 +02:00
Tor Harald Sandve
8b75e2eedc Minor fixes solvent model 
1) Fix GRAT controlled wells
2) Fix seg_fault in computeWellPotentials for solvent simulations
3) Fix mem_issus for RESV combinded with solvent
 2017-05-30 14:22:19 +02:00
Tor Harald Sandve
683ba7e929 Fix fallout from rebase 2017-05-30 14:22:19 +02:00
Tor Harald Sandve
441a8895ac Improvments for solvent model 
- add dss to appleyard chopping
- support for bhp injectors with solvent
- copy perfSolventRates between the time steps.
- fix bug in well access indicies when numComponents ~= numPhases
 2017-05-30 14:22:19 +02:00
Tor Harald Sandve
50c1a1404a Remove BlackoilSolventState 
The solvent saturation is added to BlackoilState and the
BlackoilSolventState is thus redundant.
 2017-05-30 14:22:19 +02:00
Tor Harald Sandve
b987e4b324 Implement solvent model in flow_ebos 
1) Extends the well model to account for solvent surface volumes
2) Add solvent to updateState
3) Add solvent to well and field output

The solvent parts is encapsled in if (has_solvent_) and should not effect
the standard runs.
 2017-05-30 14:22:19 +02:00
Markus Blatt
138eb2c91b Merge pull request #1193 from dr-robertk/PR/fix-mpi-deadlock-in-output 
Bugfix: fix MPI deadlock in output when asyncOutput is enabled.
 2017-05-30 11:33:54 +02:00
Robert Kloefkorn
e46810d2dc [bugfix] 1) create asyncOutput object on all ranks to avoid deadlock in 
MPI_Bcast call in writeTimeStepWithCellProperties.
2) ThreadHandle waits on destruction until all objects have been dealt with.
 2017-05-29 18:08:18 +02:00
Tor Harald Sandve
434f96db0a FIX output the correct next timestep after convergece failure 2017-05-29 09:48:34 +02:00
Markus Blatt
1b52fc0724 Add missing include of config.h 
Closes OPM/opm-core#1164
 2017-05-24 12:11:49 +02:00
Tor Harald Sandve
095c580933 Merge pull request #1174 from totto82/FIX_flowsolvent 
BUGFIX Don't try to compute effective properties for FIP if no solvent
 2017-05-22 15:02:09 +02:00
Markus Blatt
79799a5c5c Use pressure for guiding coarsening in flow_ebos, too. 
For flow_legacy the first component a block is used, which is the
oil pressure. As flow_ebos uses different indices this commit
explicitly uses BlackoilIndices::pressureSwitchIdx to tell the AMG
at which index the pressure is stored.
 2017-05-22 12:09:58 +02:00
Markus Blatt
5a6ace9063 Resort to setting one define for AMG support in the main simulator 2017-05-22 11:34:20 +02:00
Markus Blatt
98e2eeb4dc Allow usage of AMG if flow_ebos is used and UMFPack is available. 
This was previously deactivated because of the single precision support
of flow_legacy and missing single-precision support for UMFPack.

As flow_ebos does not use single precision this commit allows using amg
at least for flow_ebos.
 2017-05-22 11:32:02 +02:00
Andreas Lauser
c3555a21d2 Merge pull request #1019 from andlaus/flow_ebos-remove-geoprops 
flow_ebos: remove the legacy geologic properties object
 2017-05-19 18:49:21 +02:00
Atgeirr Flø Rasmussen
27c9585529 Merge pull request #1178 from totto82/dont_output_SSOL 
Don't output SSOL if no solvent
 2017-05-19 10:02:51 +02:00
Atgeirr Flø Rasmussen
644d1c7bb5 Merge pull request #1175 from nairr/prtheader 
PRT header
 2017-05-18 14:32:06 +02:00